13.340.20 (Head protective equipment) 标准查询与下载

ASTM F1446-03 评估防护帽性能特征的设备和程序的标准试验方法

1.1 These test methods describe laboratory equipment, procedures, and basic requirements pertinent to testing protective headgear. Deviations or additions, or both, to these test methods will be specified, as required, in individual performance standard specifications. 1.2 Requirements8212;The protective headgear is to be tested under specified environmental conditions for the following: 1.2.1 Impact attenuation (the limiting of head acceleration) of the protective headgear. 1.2.2 Strength of the retention system and its attachment. 1.2.3 Special tests for particular protective headgear uses will be specified in the individual standard specifications to be used in conjunction with these test methods. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

ASTM F2178-02 测定面部防护用品的电弧额定值的标准试验方法

1.1 This test method is used to measure the arc rating of products intended for use as face protection for workers exposed to electric arcs.1.2 This test method will measure the arc rating of face protective products. The faceshield or other applicable portions of the complete product must meet ANSI Z87.1. This excludes the textile or non ANSI Z87.1 testable parts of the hood assemblies or other tested products. This standard does not measure optical and impact properties (See ANSI Z87.1).1.3 The materials used in this method are in the form of faceshields attached to the head by protective helmets (hard hats), headgear, or hood assemblies.1.3.1 Fabric layers used in hood assemblies or other items tested under this standard meet flammability requirements of Specification F 1506.1.4 This standard shall be used to measure and describe the properties of materials, products, or assemblies in response to convective and radiant energy generated by an electric arc under controlled laboratory conditions and does not purport to predict damage from light other than the thermal aspects measured.1.5 Units8212;The values stated in either SI units or in other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.1.6 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment, which takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use.1.7 This standard does not purport to describe or appraise the effect of the electric arc fragmentation explosion and subsequent molten metal splatter, which involves the pressure wave containing molten metals and possible fragments of other materials except to the extent that heat energy transmission due to these arc explosion phenomena is reduced by test specimens.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 7.

Standard Test Method for Determining The Arc Rating Of Face Protective Products

ASTM F2220-02(2009) 头型的标准规范

1.1 This standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are included. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Headforms

ASTM F2220-02 Headforms标准规范

1.1 This standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are included.

Standard Specification for Headforms

ASTM F1446-01a 评估防护帽性能特征的设备和程序的标准试验方法

1.1 These test methods describe laboratory equipment, procedures, and basic requirements pertinent to testing protective headgear. Deviations or additions, or both, to these test methods will be specified, as required, in individual performance standard specifications. 1.2 Requirements8212;The protective headgear is to be tested under specified environmental conditions for the following: 1.2.1 Impact attenuation (the limiting of head acceleration) of the protective headgear. 1.2.2 Strength of the retention system and its attachment. 1.2.3 Special tests for particular protective headgear uses will be specified in the individual standard specifications to be used in conjunction with these test methods. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

ASTM F1446-01 评估防护帽性能特征的设备和程序的标准试验方法

1.1 These test methods describe laboratory equipment, procedures, and basic requirements pertinent to testing protective headgear. Deviations or additions, or both, to these test methods will be specified, as required, in individual performance standard specifications. 1.2 Requirements8212;The protective headgear is to be tested under specified environmental conditions for the following: 1.2.1 Impact attenuation (the limiting of head acceleration) of the protective headgear. 1.2.2 Strength of the retention system and its attachment. 1.2.3 Special tests for particular protective headgear uses will be specified in the individual standard specifications to be used in conjunction with these test methods. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

ASTM F1446-00 评估防护帽性能特征的设备和程序的标准试验方法

1.1 These test methods describe laboratory equipment, procedures, and basic requirements pertinent to testing protective headgear. Deviations or additions, or both, to these test methods will be specified, as required, in individual performance standard specifications. 1.2 Requirements8212;The protective headgear is to be tested under specified environmental conditions for the following: 1.2.1 Impact attenuation (the limiting of head acceleration) of the protective headgear. 1.2.2 Strength of the retention system and its attachment. 1.2.3 Special tests for particular protective headgear uses will be specified in the individual standard specifications to be used in conjunction with these test methods. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

ASTM F1952-00 山地自行车比赛用头盔的标准规范

1.1 This specification covers performance requirements for helmets used by down hill mountain bicycle riders. Studies have shown higher risk to the head and face for this sport as compared to recreational street riding; hence, this specification requires greater impact protection and provides performance criteria for chin bars on full face helmets, but does not require full face helmets. This specification recognizes the desirability of light weight construction and ventilation; however, it is a performance specification and is not intended to restrict design. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1466, except where noted herein.

Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing

ASTM F1849-00 短道速滑用头盔的标准规范(不包括曲棍球)

1.1 This specification covers performance requirements for helmets used by short track speed ice skaters (excluding hockey). This specification recognizes the desirability of light-weight construction and ventilation; however, it is a performance standard and is not intended to restrict design. 1.2 All testing and requirements of this specification shall be in accordance with Test Method F1446, except where noted herein. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 The following precautionary statement pertains only to the test method portions, Sections 7 and 8, or this specification. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

ASTM F697-00 口腔保护器使用和维护的标准实施规程

1.1 This practice covers the care and use of intraoral mouthguards as protective equipment for sports. 1.2 Mouthguards, as described herein, refer to either Type I, Type II, or Type III mouthguards as classified in Section 2. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Care and Use of Athletic Mouth Protectors

ASTM F2032-00 BMX赛车用头盔的标准规范

1.1 This specification covers performance requirements for helmets used in BMX cycling. Studies have shown higher risk to the head and face for this sport compared to recreational street riding; therefore this specification requires impact protection over a larger area of the head than Specification F 1447 and the CPSC standard. This specification also provides performance criteria for helmets equipped with chin bars. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F 1446 except where noted herein.

Standard Specification for Helmets Used for BMX Cycling

ASTM F659-98e1 滑雪眼镜和面罩的标准规范

1.1 This specification covers the minimal requirements for alpine skier goggles and faceshields, to provide a reasonable degree of protection against foreign objects striking or lodging in the eye or surrounding soft tissue causing eye irritation or damage; and to minimize fogging and vision restrictions that distract or handicap the skier and thereby may cause accidents.1.2 The scope of this specification shall include requirements for materials, lens size, optical properties, lens strength, field of vision, labeling, identification, and testing procedures for goggles and faceshields for alpine skiers.1.2.1 Contact lenses, sunglasses, and corrective dress eye wear are not included within the scope of this specification.1.3 The following safety hazards caveat pertains only to the test method portions, Sections 7 and 8 and Annex A1 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Skier Goggles and Faceshields

ASTM F1446-94 用于评估防护头盔性能特征的设备和程序的标准测试方法

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

ASTM F1447-93 自行车运动用防护帽

Standard Specification for Protective Headgear Used in Bicycling

ASTM F1446-93 用于评估防护头盔性能特征的设备和程序的标准测试方法

Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear