49.025.10 钢 标准查询与下载

24/30493471 DC BS EN 3638 航空航天系列 耐热合金 X6NiCrTiMoV26-15 (1.4980) 消耗电极重熔 溶液处理和沉淀处理 薄板、带材和板材 0.5 毫米 ≤ a ≤ 10 毫米

BS EN 3638 Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted. Solution treated and precipitation treated - Sheets, strips and plates. 0,5 mm ≤ a ≤ 10 mm

24/30494169 DC BS EN 3527 航空航天系列 钢 33CrMoV12 (1.8522) 空气熔化 软化 锻造坯料 a 或 D ≤ 300 毫米

BS EN 3527 Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted -Softened - Forging stock - a or D ≤ 300 mm

24/30494184 DC BS EN 3532 航空航天系列 钢 X2NiCoMo18-8-5 (1.6359) 真空感应熔炼和真空电弧重熔 溶液处理和沉淀处理 板材 6 毫米 < a ≤ 40 毫米 1 750 MPa ≤ Rm ≤ 2 000 MPa

BS EN 3532 Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates. 6 mm < a ≤ 40 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa

24/30494181 DC BS EN 3531 航空航天系列 钢 X2NiCoMo18 8 5 (1.6359) 真空感应熔炼和真空电弧重熔 溶液处理和沉淀处理 薄板和带材 a ≤ 6 毫米 1 750 MPa ≤ Rm ≤ 2 000 MPa

BS EN 3531 Aerospace series - Steel X2NiCoMo18 8 5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips. a ≤ 6 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa

24/30493453 DC BS EN 3160 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔炼 溶液处理和沉淀处理 棒材 a 或 D ≤ 200 毫米 Rm ≥ 1 310 MPa

BS EN 3160 Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 310 MPa

24/30493465 DC BS EN 3677 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔炼 溶液处理和沉淀处理 锻件 a 或 D ≤ 200 毫米 Rm ≥ 1 310 MPa

BS EN 3677 Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted. Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa

24/30493462 DC BS EN 3163 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔化 软化 锻造坯料 a 或 D ≤ 300 毫米

BS EN 3163 Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm

24/30493468 DC BS EN 3678 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔炼 溶液处理和沉淀处理 锻件 a 或 D ≤ 200 毫米 Rm ≥ 930 MPa

BS EN 3678. Aerospace series. Steel X5CrNiCu17-4 (1.4542). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa

24/30493456 DC BS EN 3161 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔炼 溶液处理和沉淀处理 棒材 a 或 D ≤ 200 毫米 Rm ≥ 930 MPa

BS EN 3161 Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted. Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 930 MPa

24/30493459 DC BS EN 3162 航空航天系列 钢 X5CrNiCu17-4 (1.4542) 空气熔炼 溶液处理和沉淀处理 薄板和带材 a ≤ 6 毫米 Rm ≥ 930 MPa

BS EN 3162 Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa

24/30493474 DC 航空航天系列 钢 40CrMoV12 (1.8523) 重熔 硬化和回火 锻件 De ≤ 50 毫米 1 250 MPa ≤ Rm ≤ 1 400 MPa

BS EN 4098 Aerospace series - Steel 40CrMoV12 (1.8523). Remelted -Hardened and tempered. Forgings - De ≤ 50 mm. 1 250 MPa ≤ Rm ≤ 1 400 MPa

24/30491497 DC 航空航天系列 31NiMoCr10-5-3 钢 1 230 MPa ≤ Rm ≤ 1 420 MPa 钢筋 De ≤ 40 毫米

BS EN 2450 Aerospace series - Steel 31NiMoCr10-5-3. 1 230 MPa ≤ Rm ≤ 1 420 MPa. Bars. De ≤ 40 mm

24/30491500 DC 航空航天系列 31NiMoCr10-5-3 钢 1 230 MPa ≤ Rm ≤ 1 420 MPa 锻件 De ≤ 40 毫米

BS EN 2451 Aerospace series - Steel 31NiMoCr10-5-3. 1 230 MPa ≤ Rm ≤ 1 420 MPa. Forgings. De ≤ 40 mm

ASTM A646/A646M-24 飞机和航空航天锻件用优质合金钢坯料和坯料标准规范

Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

BS EN 3525:2023 航空航天系列 钢 15CrMoV6 (1.7334) 空气融化了 经过硬化和回火 盘子 6mm≤a≤20mm 1,080 MPa ≤ Rm ≤ 1,280 MPa

This document specifies the requirements relating to: Steel 15CrMoV6 (1.7334) Air melted Hardened and tempered Plates 6 mm ≤ a ≤ 20 mm for aerospace applications. W.nr: 1.7334.

Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Plates. 6 mm ≤ a ≤ 20 mm. 1 080 MPa ≤ Rm ≤ 1 280 MPa

ASTM A989/A989M-23 高温设备用热等静压合金钢法兰、配件、阀门和零件的标准规范

1.1 This specification covers hot isostatically-pressed, powder metallurgy, alloy steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts made to specified dimensions or to dimensional standards, such as in ASME Specification B16.5. 1.2 Several grades of alloy steels are included in this specification. 1.3 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.4 This specification is expressed in both inch-pound units and in SI units. Unless the order specifies the applicable “M” specification designation (SI units), however, the material shall be furnished to inch-pound units. 1.5 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.6 The following safety hazards caveat pertains only to test methods portions, 8.1, 8.2, and 9.5 – 9.7 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

BS EN 2003-2:2023 航空航天系列 钢 测试方法-悬臂梁冲击试验

1   Scope This document specifies the Izod impact test method for steel products used for aerospace applications. It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

Aerospace series. Steels. Test methods - Izod impact test

BS EN 4628:2022 航空航天系列 钢 X4CrNiMo16-5-1(1.4418)空气融化了 经过硬化和回火 酒吧 从≤200mm 1150MPa≤Rm≤1300MPa

1   Scope This document specifies the requirements relating to: Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bars D e  ≤ 200 mm 1 150 MPa ≤  R m  ≤ 1 300 MPa for aerospace applications. NOTE Other common designations: — AIR: Z 8 CND 17-04. — Only the chemical composition according to this document is considered.

Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bars. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa

BS EN 4904:2022 航空航天系列 钢 36NiCrMo16（1.6773）1000MPa ≤ Rm ≤ 1200MPa 酒吧 100毫米≤D≤250毫米

This document specifies the requirements relating to: Steel 36NiCrMo16 (1.6773) Bars for aerospace applications.

Aerospace series. Steel 36NiCrMo16 (1.6773). 1 000 MPa ≤ Rm ≤ 1 200 MPa. Bars. 100 mm ≤ D ≤ 250 mm

BS EN 3364:2022 航空航天系列 钢 X5CrNiCu15-5(1.4545)自耗电极重熔、软化 锻造库存 a或D≤300毫米

1   Scope This document specifies the requirements relating to: Steel X5CrNiCu15-5 (1.4545) Consumable electrode remelted, softened Forging stock a or D ≤ 300 mm for aerospace applications.

Aerospace series. Steel X5CrNiCu15-5 (1.4545). Consumable electrode remelted, softened. Forging stocks. a or D ≤ 300 mm