53.020.30 起重设备附件 标准查询与下载
共找到 771 条与 起重设备附件 相关的标准，共 52 页
Crane - Safety - Non-fixed load lifting attachments
- ICS
- 53.020.30
- CCS
- 发布
- 2021-02-26
- 实施
- 2021-02-26
Crane. Safety. Non-fixed load lifting attachments
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2020-12-24
- 实施
- 2020-12-24
Crane – Safety – Non-fixed load lifting attachments
- ICS
- 53.020.30
- CCS
- 发布
- 2020-12-22
- 实施
- 2020-12-22
本文件规定了起重机用液压抓斗绿色设计产品的评价要求，并描述了评价方法和产品生命周期评价报告的编制方法。本文件适用于起重机用液压抓斗绿色设计产品的评价。本文件不适用于在易燃易爆、可燃性气体、核辐射等环境下使用的起重机用液压抓斗绿色设计产品的评价。文件从资源属性、能源属性、环境属性、产品属性四个维度规定了起重机用液压抓斗绿色设计产品的评价技术要求。
Green design product evaluation technical specification for crane hydraulic grab
- ICS
- 53.020.30
- CCS
- C359
- 发布
- 2020-12-18
- 实施
- 2020-12-21
Cranes and hoists — Selection of wire ropes, drums and sheves
- ICS
- 53.020.30
- CCS
- 发布
- 20201216
- 实施
- 20201216
Crane - Safety - Non-fixed load lifting attachments
- ICS
- 53.020.30
- CCS
- 发布
- 2020-12-00
- 实施
Lifting machinery electronic control equipment
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2020-08-31
- 实施
- 2021-04-01
本标准规定了桥式和门式起重机用轴承箱车轮组的结构型式和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。
Bearing housing wheel sets for bridge and gantry cranes
- ICS
- 53.020.30
- CCS
- C343
- 发布
- 2020-08-06
- 实施
- 2020-08-11
本标准规定了起重机用球墨铸铁车轮的型式与尺寸、技术要求、检验和试验、检验规则、标志、包装、运输和贮存等要求。
Ductile iron wheels for cranes
- ICS
- 53.020.30
- CCS
- C343
- 发布
- 2020-08-06
- 实施
- 2020-08-11
Round steel link chains; utilizationCha?nes en acier de section ronde, eprouvées, utilisationDiese Norm enth?lt sicherheitstechnische Festlegungen im Sinne des Gesetzes über technische Arbeitsmittel (Ger?te-sicherheitsgesetz)
Round steel link chains; utilization
- ICS
- 53.020.30
- CCS
- J18
- 发布
- 2020
- 实施
- 0000-00-00
根据移动式高空举升制瓦车高空作业特点，对其进行高空作业安全风险评估，根据评估结果，确立移动式高空举升制瓦车在设计、制造、检验、使用等应共同遵守的安全技术准则，规范移动式高空举升制瓦车产品的安全要求。
Safety specifications for mobile high-altitude lift tile-making vehicles
- ICS
- 53.020.30
- CCS
- C351
- 发布
- 2019-12-24
- 实施
- 2019-12-26
Volume B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks shown in Chapters 10-1 and 10-2 used for load handling purposes, in conjunction with equipment described in other volumes of the B30 Standard. Hooks supporting a load in the base (bowl/saddle or pinhole) of the hook are covered in Chapter 10-1. Hooks that may be loaded in other than the base (bowl/saddle or pinhole) are covered in Chapter 10-2. B30.10 卷包括适用于第 10-1 章和第 10-2 章中用于负载处理目的的吊钩的制造、连接、使用、检查和维护的规定，以及 B30 标准其他卷中描述的设备。第10-1章介绍了支撑钩子底部（碗/鞍座或针孔）中的负载的钩子。第10-2章介绍了除底座（碗/鞍座或针孔）以外的其他装载的钩子。
Hooks Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2019-11-21
- 实施
- 2019-11-21
本标准规定了宽度为 25 mm～320 mm 由聚酯、聚酰胺和聚丙烯合成纤维材料制成的一般用途合成纤维扁平吊装带的术语和定义、基本要求、技术要求、试验方法、检验规则、可查询记录、 标识、包装、运输、贮存和证书、质量承诺。 本标准适用于一般材料和物品提升作业的一般用途合成纤维扁平吊装带(以下简称吊装带)。 本标准不适用的提升作业包括：提升人、有潜在危险的物品，如：熔融的金属、酸、玻璃板、易碎物品、核反应堆、以及特殊环境下的提升作业。 本标准的吊装带适用于在以下温度范围内使用和贮存： a) 聚酯、聚酰胺： -40 ℃～100 ℃； b) 聚丙烯： -40 ℃～80 ℃。 本标准规定的技术要求，应最大限度减少附录 A 中列出的失效，列出的失效是在按照制造商或授权代表规定的说明和技术规范使用吊装带时，可能产生的失效。
Flat woven webbing slings, made of man-made fibres, for general purpose use
- ICS
- 53.020.30
- CCS
- C343
- 发布
- 2019-10-16
- 实施
- 2020-01-03
本标准规定了由聚酰胺、聚酯和聚丙烯合成纤维材料制成的圆形吊装带（以下简称吊装带）的术语和定义、基本要求、技术要求、试验方法、检验规则、 标识、包装、运输和贮存、制造商应提供的证书、质量承诺，最大极限工作载荷可达100 t。垂直提升时以及以及两肢、三肢、四肢吊装带（带或不带端 配件）。 本标准适用于一般材料和物品提升作业的一般用途合成纤维圆形吊装带(以下简称吊装带)。 本标准不适用的提升作业包括：提升人、有潜在危险的物品，如：熔融的金属、酸、玻璃板、易碎物品、核反应堆、以及特殊环境下的提升作业。本标准的吊装带适用于在以下温度范围内使用和贮存： a) 聚酯、聚酰胺： -40 ℃～100 ℃； b) 聚丙烯： -40 ℃～80 ℃。 本标准不适用于以下类型的吊装带： a) 用于托台和平台上或车辆中将货物固定或捆扎在一起的吊装带； b) 无填充物的管状吊装带。 本标准规定的技术要求，应最大限度减少附录A中列出的失效，列出的失效是在按照制造商或授权代表规定的说明和技术规范使用吊装带时，可能产生的失效。
Roundslings,made of man-made fibres,for general purpose use
- ICS
- 53.020.30
- CCS
- C343
- 发布
- 2019-10-16
- 实施
- 2020-01-03
What is ISO 4778 - Chain slings of welded construction about ? ISO 4778 specifies the requirements, methods of rating and testing of single, double, three and four legs welded chain slings of grade 8 using components such as sling chains according to ISO 3076 together with links according to ISO 16798, hooks according to ISO 7597, and forged components according to ISO 8539. The range of nominal diameter, d n, covered by ISO 4778 is from 4 mm to 45 mm. Chain slings according to ISO 4778 are for use in the temperature range –40 °C to +400 °C according to ISO 3056 . Chain slings according to ISO 4778 comply with the gener...
Round steel short link chains for lifting purposes. Chain slings of welded construction. Grade 8
- ICS
- 53.020.30
- CCS
- 发布
- 2019-06-30
- 实施
- 2019-06-30
This document specifies the requirements, methods of rating and testing of single, double, three and four leg welded chain slings of grade 8 using components such as sling chains according to ISO 3076 together with links according to ISO 16798, hooks according to ISO 7597 and forged components according to ISO 8539. NOTE 1 For special lifting purposes not covered by this document, additionally intermediate links can be used, for example to connect components to each other having different working load limit. The range of nominal diameter, dn, covered by this document is from 4 mm to 45 mm. Chain slings according to this document are for use in the temperature range –40 °C to +400 °C according to ISO 3056. NOTE 2 Concerning the use and maintenance of chain slings of grade 8, see ISO 3056. Chain slings according to this document comply with the general conditions of acceptance of ISO 1834 and are used for symmetrically distributed loads only. NOTE 3 For rating of chain slings with asymmetrically distributed loads, see ISO 3056. This document does not apply to mechanically joined chain slings. NOTE 4 For mechanically joined chain slings, see ISO 7593.
Round steel short link chains for lifting purposes — Chain slings of welded construction — Grade 8
- ICS
- 53.020.30
- CCS
- 发布
- 2019-06-14
- 实施
Volume B30.30 includes provisions that apply to the construction, selection, installation, attachment, testing, inspection, maintenance, repair, use, and replacement of wire rope, hybrid rope, and synthetic fiber rope and rope-lifting components used in conjunction with equipment addressed in the volumes of the ASME B30 Standard. These provisions apply to a particular volume when B30.30 is referenced and as specified in that volume. B30.30卷包括适用于钢丝绳，混合绳索和合成纤维绳以及与ASME B30标准卷中涉及的设备一起使用的钢丝绳，混合绳索和合成纤维绳索以及绳索起重部件的构造，选择，安装，连接，测试，检查，维护，维修，使用和更换的规定。当引用B30.30时，这些规定适用于特定卷，并且该卷中指定。
Ropes
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2019-03-04
- 实施
- 2019-03-04
Cranes -- Wire ropes -- Care and maintenance, inspection and discard
- ICS
- 53.020.30
- CCS
- 发布
- 2019-02-25
- 实施
Mechanical parking equipment three-in-one reducer
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2018-12-21
- 实施
- 2019-10-01
