97.150 铺地非织物 标准查询与下载

ASTM F924-90(2022) 减震弹性地板覆盖物的耐刺穿的标准试验方法

1.1 This test method covers the laboratory procedure for determining the resistance of cushioned resilient floor coverings to punctures from dropped pointed objects such as dinner forks. 1.2 This test method employs a 35-g cylindrical dart with a flat, small-diameter tip that is dropped onto a specimen of flooring. The dart represents the weight of a typical fork and the tip produces a similar puncture to those which result from dropped forks. 1.3 Flooring with thick wear layers may not puncture under even the most severe drop. Although data can be obtained by increasing the drop height or the weight of the dart, values of this magnitude have no practical application. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precaution statement see 8.2. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

BS ISO 21629-2:2022 竹地板 户外使用

1   ​Scope This document specifies the technical requirements, test methods and requirements for the handling, storage, packaging and marking of outdoor bamboo flooring . It is applicable to outdoor bamboo flooring including bamboo laminated flooring and bamboo scrimber flooring.

Bamboo floorings - Outdoor use

ISO 26986:2010/Amd 1:2022 弹性地板覆盖物.膨胀（缓冲）聚氯乙烯地板覆盖物 规范 修改件1

Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification — Amendment 1

BS ISO 24335:2022 层压地板覆盖物 抗冲击性的测定

1   Scope This document specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The falling height of both the small and the large steel ball is used to define the ability for a laminate floor covering element to withstand impacts. Both tests are generally carried out on parts of the laminate floor panels with suitable sizes. The precision of the large-diameter ball method is not known. When interlaboratory data become available, a precision statement will be added in subsequent revisions. The precision regarding the small diameter method is stated in Clause 8.

Laminate floor coverings. Determination of impact resistance

ISO 21629-2:2022 竹地板.第2部分:室外使用

Bamboo floorings — Part 2: Outdoor use

KS K ISO 20251:2022 铺地织物.防水性试验

Textile floor coverings — Water impermeability test

KS K ISO 20251-2022 铺地织物.防水性试验

Textile floor coverings — Water impermeability test

KS K ISO 8543-2022 铺地织物.质量测定方法

Textile floor coverings — Methods for determination of mass

KS K ISO 13746:2022 铺地织物.楼梯安装和使用指南

Textile floor coverings — Guidelines for installation and use on stairs

KS K ISO 10581:2022 弹性地板覆盖物.均质聚氯乙烯地板覆盖物规范

Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification

KS K ISO 8543:2022 铺地织物.质量测定方法

Textile floor coverings — Methods for determination of mass

KS K ISO 13746-2022 铺地织物.楼梯安装和使用指南

Textile floor coverings — Guidelines for installation and use on stairs

KS K ISO 2551:2022 织物地板覆盖物和瓷砖形式的织物地板覆层.由于不同的水和热条件以及平面外变形的影响而引起的尺寸变化的测定

Textile floor coverings and textile floor coverings in tile form —Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane

KS K ISO 11638-2022 弹性地板覆盖物.泡沫非均质聚氯乙烯地板.规范

Resilient floor coverings — Heterogeneous poly(vinyl chloride)flooring on foam — Specification

KS K ISO 2551-2022 织物地板覆盖物和瓷砖形式的织物地板覆层.由于不同的水和热条件以及平面外变形的影响而引起的尺寸变化的测定

Textile floor coverings and textile floor coverings in tile form —Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane

KS K ISO 10581-2022 弹性地板覆盖物.均质聚氯乙烯地板覆盖物规范

Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification

KS K ISO 11638:2022 弹性地板覆盖物.泡沫非均质聚氯乙烯地板.规范

Resilient floor coverings — Heterogeneous poly(vinyl chloride)flooring on foam — Specification

ISO 24335:2022 层压地板覆盖物.耐冲击性的测定

This document specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The falling height of both the small and the large steel ball is used to define the ability for a laminate floor covering element to withstand impacts. Both tests are generally carried out on parts of the laminate floor panels with suitable sizes. The precision of the large-diameter ball method is not known. When interlaboratory data become available, a precision statement will be added in subsequent revisions. The precision regarding the small diameter method is stated in Clause 8.

Laminate floor coverings — Determination of impact resistance

BS ISO 4760:2022 强化木地板 局部防潮 组装接头

1   Scope This document specifies a test method to evaluate moisture resistance to surface water exposure of a joined, floating, laminate flooring assembly/element . This document also establishes criteria for rating and assessing performance.

Laminate flooring. Topical moisture resistance. Assembled joint

EN ISO 11638:2022 弹性地板覆盖物.泡沫异相聚氯乙烯地板.规范

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish. To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)