共找到 845 条与 铁矿 相关的标准,共 57 页
GB/T 6730的本部分规定了高碘酸钾分光光度法测定锰含量。 本部分适用于铁矿石、铁精矿、烧结矿和球团矿中锰含量的测定。测定范围(质量分数):0.050%~5.00%。
Iron ores.Determination of manganse content.Potassium periodate spectrophotometric method
GB/T 6730的本部分规定了硫酸亚铁铵还原-硅钼蓝分光光度法测定硅含量。 本部分适用于天然铁矿石、铁精矿、烧结矿和球团矿中硅含量的测定。测定范围(质量分数): 0.10%~5.00%。
Iron ores.Determination of silicon content.Silicomolybdic blue spectrophotometric method reduced by ammonium ferrous sulfate
GB/T 6730的本部分规定了用三氯化铁-乙酸钠滴定法测定金属铁含量。 本部分适用于铁矿石、铁精矿、烧结矿和球团矿中金属铁含量的测定。测定范围(质量分数): 0.150%~3.00%。
Iron ores.Determination of metallic iron content.Ferric chloride-sodium acetate titrimetric method
GB/T6730 的本部分规定了用重铬酸钾滴定法测定亚铁含量。 本部分适用于铁矿石.铁精矿、烧结矿和球团矿中亚铁含量的测定。 测定范围(质量分数):0.700%~30.00%
Iron ores.Determination of iron (Ⅱ) content.Potassium dichromate titrimetric method
GB/T 6730的本部分规定了用磺基水杨酸分光光度法测定金属铁含量。 本部分适用于铁矿石、铁精矿、烧结矿和球团矿中金属铁含量的测定。测定范围(质量分数): 0.020%~0.300%。
Iron ores.Determination of metallic iron content.Sulfosalicylic acid spectrophotometric method
GB/T 6730的本部分规定了用双环己酮草酰二腙分光光度法测定铜含量。 本部分适用于铁矿石、铁精矿、烧结矿和球团矿中铜含量的测定。测定范围(质量分数):0.010%~1.00%。
Iron ores—Determination of copper content—Oxalic acid bis-cyclohexylidene hydragide (cuprizone) spectrophotometric method
"Iron ores—Determination of arsenic,chromium,cadmium,lead and mercury content—Inductively coupled plasma mass spectrometry method(ICP MS)"
GB/T 6730的本部分规定了火焰原子吸收光谱法测定铁矿石中铜含量的方法。 本部分适用于天然铁矿石、铁精矿和造块,包括烧结产品中铜含量的测定,测定范围(质量分数): 0.004% ~0.8%。
Iron ores.Determination of copper content.Flame atomic absorption spectrometric method
GB/T 6730的本部分规定了铁矿石分析用预干燥试样的制备。 本部分适用于天然铁矿石、铁精矿和造块,包括烧结产品中分析用预干燥试样的制备。 本部分不适用于含金属铁的直接还原铁试样,含硫量大于0.2%(质量分数)或含化合水大于2.5%(质量分数)的天然或加工铁矿石试样,上述试样使用GB/T 6730.3。
Iron ores.Preparation of predried test samples for chemical analysis
GB/T 6730的本部分规定了电感耦合等离子体质谱法(ICP-MS)测定铁矿石中砷、铬、镉、铅和汞的方法。 本部分适用于天然铁矿石、铁精矿、烧结矿及球团矿,测定范围如表1所示。
Iron ores.Determination of arsenic, chromium, cadmium, lead and mercury content.Inductively coupled plasma-mass spectrometry method (ICP-MS)
GB/T 6730的本部分规定了EDTA光度滴定法测定铁矿石中全铁含量。 本部分适用于天然铁矿、铁精矿和人造块矿,包括烧结矿和球团矿中全铁含量的测定。测定范围(质量分数)为30%~72%。
Iron ores.Determination of total iron content.EDTA photometric titration method
本标准规定了铁矿石产品等级的划分。 本标准适用于铁矿石产品中块矿、粉矿和精矿产品等级的划分,不包括铁烧结矿和球团矿。
Division of production grade for iron ores
Iron ores—Determination of total iron content—EDTA photometric titration method
"Iron ores—Determination of mercury content—Solid sampling and direct mercury analysis method"
本标准规定了固体进样直接测定法测定汞含量的方法。 本标准适用于铁矿石中汞含量的测定,测定范围为:0.005 μg/g~5.00 μg/g。
Iron ores.Determination of mercury content.Solid sampling and direct mercury analysis method
GB/T31923 的本部分规定了高炉炉料用铁矿石被CO.CO,、HFil No 还原后粉化程度的测定试验方法,试验条件主要类似于高炉低温还原区。 本部分适用于块矿,烧结矿和球团矿的低温还原粉化静态试验。
Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 1: Reduction with CO, CO2, H2 and N2
GB/T31923 的本部分規定了高炉炉料用铁矿石被CO和N:*还原后粉化程度的试验方法,试验条件主要类似于高炉低温还原区。 本部分适用于块矿烧结矿和球团矿的低温还原粉化静态试验。
Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 2:Reduction with CO and N2
GB/T 6730的本部分规定了用燃烧碘量法测定铁矿石中硫含量。本部分适用于天然铁矿石、铁精矿、烧结矿和球团矿中硫含量的测定。测定范围(质量分数):0.002 0%~0.50%。
Iron ores.Determination of sulfur content.Combustion iodometric method
GB/T 6730的本部分规定了用重量法测定铁矿石中硅含量。本部分适用于天然铁矿石、铁精矿和人造块矿,包括烧结产品。测定范围(质量分数)为1.00%~15.00%。方法1:本方法不适用于还原剂含量大于2%(质量分数)的铁矿石,例如,黄铁矿或含氟量超过0.1%(质量分数)的铁矿石。此法推荐用于两性元素含量较高的低品位矿石。方法2:本方法可用于含氟量大于0.1%(质量分数)的铁矿石。此法推荐用于含脉石低的高品位矿石。
Iron ores.Determination of silicon content.Gravimetric methods
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号