E08 标志、包装、运输、贮存 标准查询与下载

DB37/T 3196-2018 原油储运行业企业安全生产风险分级管控体系实施指南

Guidelines for the implementation of the safety production risk classification management and control system for enterprises in the crude oil storage and transportation industry

ISO 2715:2017 液态烃.涡轮流量计容积测量.涡轮流量计系统的体积测量

This document describes and discusses the characteristics of turbine flowmeters. Attention is given to the factors to be considered in the application of turbine meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed. This document is applicable to the metering of any appropriate liquid. Guidance is given on the use of turbine meters in the metering of two-component liquid mixtures such as water and oil. It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering and is not restricted to hydrocarbons. Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined. This document is not applicable to cryogenic liquids, such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water applications.

Liquid hydrocarbons. Volumetric measurement by turbine flowmeter. Volumetric measurement by turbine meter systems

ISO 2714:2017 液态烃.用容积置换仪表测量体积

This document describes and discusses the characteristics of displacement flowmeters. Attention is given to the factors to be considered in the application of positive displacement meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed. This document is applicable to the metering of any appropriate liquid. Guidance is given on the use of positive displacement meters in the metering of two-component mixtures of the same phase such as water and oil. It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering only. It is not restricted to hydrocarbons. Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined. This document is not applicable to cryogenic liquids such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water and fuel dispenser applications.

Liquid hydrocarbons - Volumetric measurement by displacement meter

EN ISO 8311:2013 冷冻轻烃液和非石油基液化气体燃料.船用隔膜式油罐和单独式油罐的标定.手工和内部电光测距法(ISO 8311:2013)

Diese Internationale Norm legt ein Verfahren zur Innenmessung von Membrantanks in Schiffen, die fur den Transport von durch Abkuhlung verflussigten leichten Kohlenwasserstoffen vorgesehen sind, fest. Auser dem Messvorgang selbst werden die Verfahren beschrieben, mit deren Hilfe sich Tabellen fur die Tankkapazitat und Korrekturtabellen zur Berechnung der mengenmasigen Schiffsladung aufstellen lassen. Diese Internationale Norm kann mit einigen Modifikationen auch fur die Kalibrierung unabhangiger Tanks in prismatischer Form angewendet werden. Fur die in dieser Internationalen Norm beschriebenen Verfahrensablaufe wird bei der manuellen Messung von Membrantanks zum Abstutzen der Messgerate das Gerust verwendet, mit dem die Membran aufgestellt wurde; fur das interne elektrooptische Distanzmessverfahren (EDM) sollten jedoch andere Hilfsmittel fur den Zugriff auf die benotigten Messpositionen angewendet werden.

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods

ISO 8311:2013 冷冻轻烃液和非石油基液化气体燃料.船用隔膜式油罐和单独式油罐的标定.手工和内部电光测距法

This International Standard specifies a method for the internal measurement of membrane tanks used in ships for the transport of refrigerated light hydrocarbon fluids. In addition to the actual process of measurement, it sets out the calculation procedures for compiling the tank capacity table and correction tables to be used for the computation of cargo quantities. This International Standard, with some modification, can also be applicable to the calibration of independent prismatic tanks.

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels.Calibration of membrane tanks and independent prismatic tanks in ships.Manual and internal electro-optical distance-ranging methods

SN/T 2389.13-2013 进出口商品容器计重规程 第13部分:石油及其液态产品船舱静态计重

SN/T 2389的本部分规定了进出口石油及其液态产品船舱静态计重的基本要求、方法、程序和技术规范。本部分适用于进出口石油及其液态产品船舱静态时的计重。

Rules for measurement survey on import and export commodities.Part 13:Static measurement of petroleum and liquid petroleum products by ship's tank

ASTM D4306-12a 受痕量杂质影响的试验用航空燃料采样容器的标准实施规程

General descriptions for the manual sampling of petroleum products are given in Practice D4057. However, a number of aviation fuel properties are established or affected by trace levels of polar or other compounds. Measurement significance therefore requires that the sample containers not add or adsorb any materials. This practice presents types and preparations of sampling containers found satisfactory for the determination of water separation, copper corrosion, electrical conductivity, thermal stability, lubricity, and trace metal content. An approval procedure for new containers is also given. Two properties, particulate contamination and free water content, involve materials easily removed by any sampling container. These properties should be determined by placing the sample directly into the measuring apparatus and not using containers to transport the sample to the measuring equipment. Recommendations in this practice provide guidance for immediate use and for storage of samples. Immediate use involves sample storage for periods less than 24 h.1.1 This practice covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 5.1, 5.2, 5.3, 5.4, and 5.6.

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

ASTM D4306-12c 受痕量杂质影响的试验用航空燃料采样容器的标准实施规程

3.1 General descriptions for the manual sampling of petroleum products are given in Practice D4057. However, a number of aviation fuel properties are established or affected by trace levels of polar or other compounds. Measurement significance therefore requires that the sample containers not add or adsorb any materials. This practice presents types and preparations of sampling containers found satisfactory for the determination of water separation, copper corrosion, electrical conductivity, thermal stability, lubricity, and trace metal content. An approval procedure for new containers is also given. 3.2 Two properties, particulate contamination and free water content, involve materials easily removed by any sampling container. These properties should be determined by placing the sample directly into the measuring apparatus and not using containers to transport the sample to the measuring equipment. 3.3 Recommendations in this practice provide guidance for immediate use and for storage of samples. Immediate use involves sample storage for periods less than 24 h. 1.1 This practice2 covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 5.1, 5.2, 5.3, 5.4, and 5.6.

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

ASTM D4306-12b 受痕量杂质影响的试验用航空燃料采样容器的标准实施规程

General descriptions for the manual sampling of petroleum products are given in Practice D4057. However, a number of aviation fuel properties are established or affected by trace levels of polar or other compounds. Measurement significance therefore requires that the sample containers not add or adsorb any materials. This practice presents types and preparations of sampling containers found satisfactory for the determination of water separation, copper corrosion, electrical conductivity, thermal stability, lubricity, and trace metal content. An approval procedure for new containers is also given. Two properties, particulate contamination and free water content, involve materials easily removed by any sampling container. These properties should be determined by placing the sample directly into the measuring apparatus and not using containers to transport the sample to the measuring equipment. Recommendations in this practice provide guidance for immediate use and for storage of samples. Immediate use involves sample storage for periods less than 24 h.1.1 This practice covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 5.1, 5.2, 5.3, 5.4, and 5.6.

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

DB13/T 1348-2010 地源热泵系统节能监测规范

本规范规定了地源热泵系统节能检测的原理、检测项目、检测设备、检测步骤、节能量的计算等内容。本规范适用于以岩土体、地下水、地表水为低温热源，以水或添加防冻剂的水溶液为传热介质，采用蒸气压缩热泵技术进行夏季供冷、冬季供热或加热生活热水的地源热泵系统的节能检测。

Energy saving monitoring specification for ground source heat pump system

DB13/T 1286-2010 钢质甲醇汽油储罐内防腐工程技术规范

本标准规定了钢质甲醇汽油储罐内防腐工程的一般规定、防腐施工、过程检查控制与交工验收、运行维护和检测。本标准适用于新建和旧罐改装甲醇汽油的钢质储罐。

Technical specification for internal anti-corrosion engineering of steel methanol gasoline storage tanks

DB65/T 2958-2009 樱桃李丰产栽培技术规程

Norms of soft package pitch

DB65/T 2957-2009 沥青软包装规范

Norms of soft package pitch

KS M ISO 2714:2003 液态烃.用容量式流量计系统测定容量

이 규격은 변위식 미터의 특성에 대하여 규정하고 계측 시스템의 설치와 선정, 성능, 작

Liquid hydrocarbons-Volumetric measurement by displacement meter systems other than dispensing pumps

KS M ISO 2715:2003 液态烃.用涡轮流量计系统测定容量

이 규격은 터빈 미터의 특성에 대하여 규정하고, 계량 시스템의 설치와 선정, 성능, 작

Liquid hydrocarbons-Volumetric measurement by turbine meter systems

JJG(石油) 11-2000 井下流量计及检定装置检定规程

Verification Regulation of Downhole Flow Meter and Flow Meter Facilities

ASTM D4418-00(2011) 接收,贮存和搬运燃气轮机燃料的标准操作规程

This practice provides the user of gas turbine fuel oils and the designer of gas turbine fuel systems with an appreciation of the effects of fuel contaminants and general methods of controlling such contaminants in gas turbine fuel systems. This practice is general in nature and should not be considered a substitute for any requirement imposed by warranty of the gas turbine manufacturer, or by federal, state, or local government regulations. Although it cannot replace a knowledge of local conditions or the use of good engineering and scientific judgment, this practice does provide guidance in development of individual fuel management systems for the gas turbine user.1.1 This practice covers the receipt, storage, and handling of fuels for gas turbines, except for gas turbines used in aircraft. It is intended to provide guidance for the control of substances in a fuel that could cause deterioration of either the fuel system, or the gas turbine, or both. 1.2 This practice provides no guidance for either the selection of a grade of fuel, a topic covered by Specification D2880, or for the safety aspects of the fuel and fuel systems. For example, this practice does not address the spacings of storage tanks, loading and unloading facilities, etc., and procedures for dealing with the flammability and toxic properties of the fuels. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Receipt, Storage, and Handling of Fuels for
Gas Turbines

JJG(石油) 05-2000 井温仪检定规程

The Verification Regulation of Well Thermometer

NF M08-021:1999 原油及石油产品.运输的可衡算性.远洋油轮装载和卸载时容器经验参数的评定

Crude petroleum and petroleum products. Transfer accountability. Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels.

ISO/TR 13739:1998 石油产品 制定向船用燃料舱输送燃料的实用程序的方法

This Technical Report describes a method for specifying practical procedures for the transfer of bunker fuels to ships. It is important to note that this Technical Report neither governs the legal rights of shipowners/buyers and bunker suppliers nor does it supersede applicable legislation.

Petroleum products - Methods for specifying practical procedures for the transfer of bunker fuels to ships