E94 海洋石油作业用设备 标准查询与下载

DIN EN ISO 19901-6:2012 石油和天然气工业.海上建筑物的详细要求.第6部分:船舶管理

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO 19901-6:2009 + Cor. 1:2011); English version EN ISO 19901-6:2009 + AC:2011, only on CD-ROM

SY/T 10010-2012 非分类区域和 I 级 1 类及 2 类区域的固定及浮式海上石油设施的电气系统设计与安装推荐作法

1.1.1 本标准是海上固定和浮式石油生产设施电气系统的设计和安装的最低要求和准则。这些设施包括与油气勘探和生产相关的钻井、生产和管道输送设备。本标准不适用于没有生产设施的移动式海上钻井装置(MODUs)。本标准意在将海洋电气系统基本的、所期望的电气作法，汇集起来加以简要地叙述。包含在本标准中的推荐作法考虑到了存在于海上石油设施的特殊电气条件，这些条件包括：a) 由海洋环境和钢甲板引起的内在电击的可能性。b) 有限的空间要求设备被安装在分类区域内或分类区附近。 c) 具有腐蚀性的海洋环境。d) 浮式设施的运动和浮力所涉及的问题。 1.1.2 本标准适用于永久性和临时性的电气设备。本标准中提出的准则与定义明确的区域分类结合使用将会提供高水平的电气安全。本标准强调用于海上石油设施分类区的安全作法，但不包括区域分类的准则。对于区域分类的准则参考API RP 500和API RP 505。

Recommended practice for design and installation of electrical systems for fixed and floating offshore petroleum facilities for unclassified and class I, division 1 and division 2 locations

SY/T 6876-2012 壳的屈曲强度

本标准规定了海洋壳式钢结构屈曲强度设计的推荐做法，供设计结构时使用。本标准适用于海洋壳式钢结构的屈曲强度设计。

Bulkling strength of shells

SY/T 10026-2012 海上地震采集定位辅助设备校准指南

本标准规定了电罗经和测深仪的校准方法、技术要求和技术指标；实时差分全球定位系统(DGPS)、相对全球定位系统(RGPS)、深度传感器及海水声速仪的核查方法、技术要求和技术指标。本标准适用于海上地震资料采集定位导航设备的校准和核查。

Calibration guideline of positioning system and ancillary equipment for marine seismic survey

ISO 19901-6:2009/cor 1:2011 石油天然气工业.海洋结构物专用要求.第6部分:海上操作.技术勘误表1

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations; Technical Corrigendum 1

BS EN ISO 13628-15:2011 石油和天然气工业.水下开采系统的设计和运作.水下结构和歧管

Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea structures and manifolds

ISO 13628-15:2011 石油和天然气工业.水下生产系统的设计和操作.第15部分:水下结构和歧管

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds

ISO 13628-4:2010/cor 1:2011 石油和天然气工业.水下采油系统的设计和操作.第4部分:海底井口和树设备.技术勘误表1

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment; Technical Corrigendum 1

DIN EN ISO 19901-3:2011 石油和天然气工业 海上构筑物的特定要求 第3部分：最上层构筑物(ISO 19901-3-2010) 英文版本EN ISO 19901-3-2010

This part of ISO 19901 gives requirements for the design,fabrication,installation,modification and structural integrity management for the topsides structure for and oil and gas platform.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2010); English version EN ISO 19901-3:2010, only on CD-ROM

DIN EN ISO 13628-4:2011 石油和天然气工业 海底开采系统的设计和操作 第4部分：海底井口装置和采油树设备(ISO 13628-4-2010) 英文版本EN ISO 13628-4-2010

This part of ISO 13628 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle, test and install the equipment. It also specifies the areas of design, material, welding, quality control (including factory acceptance testing), marking, storing and shipping for both individual sub-assemblies (used to build complete subsea tree assemblies) and complete subsea tree assemblies. The user is responsible for ensuring subsea equipment meets any additional requirements of governmental regulations for the country in which it is installed. This is outside the scope of this part of ISO 13628. Where applicable, this part of ISO 13628 can also be used for equipment on satellite, cluster arrangements and multiple well template applications.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010); English version EN ISO 13628-4:2010, only on CD-ROM

DIN EN ISO 19906:2011 石油和天然气工业 北极的海上建筑物(ISO 19906-2010) 英文版本EN ISO 19906-2010

This International Standard specifies requirements and provides recommendations and gurdance for the design, construction, transportationm installation and removal of offshore structures, related to the activities of the petroleum and natural gas industries in arctic and cold regions.

Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010); English version EN ISO 19906:2010, only on CD-ROM

BS EN ISO 19901-3:2010 石油和天然气工业.海上建筑物的专门要求.水线以上部分结构

Petroleum and natural gas industries. Specific requirements for offshore structures. Topsides structure

BS IEC 61892-1:2010 移动式及固定式海上设施.电气装置.一般要求和条件

Mobile and fixed offshore units. Electrical installations. General requirements and conditions

ISO 19901-3:2010 石油和天然气工业.海上建筑物的具体要求.第3部分:水线以上部分结构

This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning modifications and maintenance relate only to those aspects that are of direct relevance to the structural integrity of the topsides structure. The actions on (structural components of) the topsides structure are derived from this part of ISO 19901, where necessary in combination with other International Standards in the ISO 19901 series. The resistances of structural components of the topsides structure can be determined by the use of international or national building codes, as specified in this part of ISO 19901. If any part of the topsides structure forms part of the primary structure of the overall structural system of the whole platform, the requirements of this part of ISO 19901 are supplemented with applicable requirements in ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906. This part of ISO 19901 is applicable to the topsides of offshore structures for the petroleum and natural gas industries, as follows: -topsides of fixed offshore structures; -discrete structural units placed on the hull structures of floating offshore structures and mobile offshore units; -certain aspects of the topsides of arctic structures. This part of ISO 19901 is not applicable to those parts of the superstructure of floating structures that form part of the overall structural system of the floating structure; these parts come under the provisions of ISO 19904-1. This part of ISO 19901 only applies to the structure of modules on a floating structure that do not contribute to the overall integrity of the floating structural system. This part of ISO 19901 is not applicable to the structure of hulls of mobile offshore units. This part of ISO 19901 does not apply to those parts of floating offshore structures and mobile offshore units that are governed by the rules of a recognized certifying authority and which are wholly within the class rules. Some aspects of this part of ISO 19901 are also applicable to those parts of the hulls of floating offshore structures and mobile offshore units that contain hydrocarbon processing, piping or storage. This part of ISO 19901 contains requirements for, and guidance and information on, the following aspects of topsides structures: -design, fabrication, installation and modification; -in-service inspection and structural integrity management; -assessment of existing topsides structures; -reuse; -decommissioning, removal and disposal; -prevention, control and assessment of fire, explosions and other accidental events. This part of ISO 19901 applies to structural components including the following: -primary and secondary structure in decks, module support frames and modules; -flare structures; -crane pedestal and other crane support arrangements; -helicopter landing decks (helidecks); -permanent bridges between separate offshore structures; -masts, towers and booms on offshore structures.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure

ISO 19906:2010 石油与天然气工业.北极海岸结构

This International Standard specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and removal of offshore structures, related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this International Standard is deemed to include both the Arctic and other cold regions that are subject to similar sea ice, iceberg and icing conditions. The objective of this International Standard is to ensure that offshore structures in arctic and cold regions provide an appropriate level of reliability with respect to personnel safety, environmental protection and asset value to the owner, to the industry and to society in general. This International Standard does not contain requirements for the operation, maintenance, service-life inspection or repair of arctic and cold region offshore structures, except where the design strategy imposes specific requirements (e.g. 17.2.2). While this International Standard does not apply specifically to mobile offshore drilling units (see ISO 19905-1), the procedures relating to ice actions and ice management contained herein are applicable to the assessment of such units. This International Standard does not apply to mechanical, process and electrical equipment or any specialized process equipment associated with arctic and cold region offshore operations except in so far as it is necessary for the structure to sustain safely the actions imposed by the installation, housing and operation of such equipment.

Petroleum and natural gas industries - Arctic offshore structures

BS IEC 61892-5:2010 移动和固定的近海工程装置.电气设备.移动装置

Mobile and fixed offshore units. Electrical installations. Mobile units

SY/T 4084-2010 滩海环境条件与荷载技术规范

本标准给出了滩海油气勘探开发工程（以下称滩海工程）中滩海环境条件和环境载荷的指南。 本标准适用于滩海工程设计、建造、安装与使用中的环境条件参数选取及荷载计算，其他近岸工程亦可参照本标准执行。

Technical specification for environmental conditions and loads in shallow water

SY/T 6776-2010 海上生产设施设计和危险性分析推荐作法

本推荐作法为敞开式海上平台生产设施的设计和布置推荐了最低要求和指南，同时对海上生产设施的各种基本风险分析程序进行统一简要的描述。本推荐作法对几种适用于平台风险分析的程序进行了讨论，并对工艺安全信息和风险分析提出了最低要求。以满足API RP 75的要求。 本推荐作法针对常规生产作业有关的永久性和临时性的设施。所给出的指导原则与相关行业规范、作法和标准结合使用后应能达到可接受的安全等级。

Recommended practice for design and hazards analysis for offshore production facilities

SY/T 6775-2010 滩海堤坝坝体检测规程(瑞雷波法)

本标准规定了滩海堤坝坝体检测的程序、内容和方法等的基本要求。 本标准适用于滩海堤坝坝体施工验收、运行检测、改造加固等阶段的检测。滩海陆岸设施、土石人工岛等类似的工程可参照本标准执行。

Standard of seabank embankment inspection(rayleigh wave method)

ISO 13628-1:2005/Amd 1:2010 石油和天然气工业.海底开采系统的设计和操作.第1部分:一般要求与推荐标准;修改件1:修订条款6

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations; Amendment 1: Revised Clause 6