F12 太阳能 标准查询与下载

NB/T 32042-2018 光伏发电工程建设监理规范

Photovoltaic power generation project construction supervision specifications

DIN IEC/TS 62446-3:2018 光伏(PV)系统.试验,文档和维护要求.第3部分:光伏模组和电站.室外红外热成像法(IEC/TS 62446-3-2017)

This part of IEC 62446 defines outdoor thermographic (infrared) inspection of PV modules and plants in operation. The inspection can include cables, contacts, fuses, switches, inverters, and batteries. This inspection supports the preventive maintenance for fire protection, the availability of the system for power production, and the inspection of the quality of the PV modules. Included in this document are the requirements for the measurement equipment, ambient conditions, inspection procedure, inspection report, personnel qualification and a matrix for thermal abnormalities as a guideline for the inspection.

Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography (IEC/TS 62446-3:2017)

T/CEMIA 005-2018 光伏单晶硅生长用石英坩埚生产规范

本标准规定了光伏单晶硅生长用石英坩埚从业人员、生产设备、原辅材料、生产工艺、作业环境及产品质量管控等。 本标准适用于光伏单晶硅生长用石英坩埚生产过程。

Quartz crucible manufacturing practices for photovoltaic single crystal silicon growth

T/CEMIA 004-2018 光伏单晶硅生长用石英坩埚

本标准规定了光伏单晶硅生长用石英坩埚的产品术语和定义、规格尺寸、技术要求、试验方法、检验规则、标志、包装、运输、储存等。 本标准适用于以高纯石英砂（二氧化硅）为原料，采用电弧工艺生产的用于直拉光伏单晶硅生长用石英坩埚。

Quartz crucibles for single crystal silicon growth in photovoltaic industry

DB44/T 2089-2018 平板型太阳能集热器选材通用技术条件

本标准规定了平板型太阳能集热器（以下简称“集热器”）的术语和定义、集热器结构组成及选材推荐等级、选材原则、要求及试验方法。 本标准适用于利用太阳辐射加热，传热工质为液体, 工作温度不超过100 ℃的平板型太阳能集热器的选材。 本标准不适用于无盖板和非金属材料吸热体的平板型太阳能集热器。

General technical requirements for material selection of flat-plate solar collectors

DIN EN 62670-3:2017 聚光光伏(CPV).性能试验.第3部分:性能测量和功率定额(IEC 62670-3-2017);德文版本EN 62670-3-2017

This part of IEC 62670 defines measurement procedures and instrumentation for determining concentrator photovoltaic performance at CSOC and CSTC (defined in IEC 62670-1) conditions, including power ratings.

Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating (IEC 62670-3:2017); German version EN 62670-3:2017

NB/T 32037-2017 光伏发电建设项目文件归档与档案整理规范

Photovoltaic power generation construction project document archiving and file arrangement specifications

NB/T 32036-2017 光伏发电工程达标投产验收规程

Acceptance procedures for photovoltaic power generation projects reaching standards and being put into production

NF C57-805-2*NF EN 62805-2:2017 光伏玻璃的测量方法. 第2部分:透射率和反射率的测量

Method for measuring photovoltaic (PV) glass - Part 2 : Measurement of transmittance and reflectance

IEC TS 62862-1-3:2017 太阳能热电厂.第1-3部分:通用.气象数据集的数据格式

The goal of this document on data format is to reduce efforts for data exchange and to avoid errors caused by misunderstandings due to the application of various different and at times unclear formats. To achieve this goal, the proposed format has the following properties: suitability for common operation systems; suitability for satellite/modelderived data; suitability for measured data; suitability for combined data sets; suitability for typical meteorological years and forecasted data.

Solar thermal electric plants - Part 1-3: General - Data format for meteorological data sets

DIN EN 62925:2017 聚光光伏(CPV)模组.区分热疲劳耐久性增加的热循环试验(IEC 62925-2016);德文版本EN 62925-2017

The purpose of this International Standard is to define a test sequence that will quickly uncover CPV module failures that have been associated with field exposure to thermal cycling for many years. This standard was specifically developed to relate to thermal fatigue failure of the HCPV die attach, however will also apply, to some extent, to all thermal fatigue related failure mechanisms for the assemblies submitted to test.

Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability (IEC 62925:2016); German version EN 62925:2017

ISO 9806:2017 太阳能.太阳能集热器.试验方法

This document specifies test methods for assessing the durability, reliability, safety and thermal performance of fluid heating solar collectors. The test methods are applicable for laboratory testing and for in situ testing. This document is applicable to all types of fluid heating solar collectors, air heating solar collectors, hybrid solar collectors co-generating heat and electric power, as well as to solar collectors using external power sources for normal operation and/or safety purposes. It does not cover electrical safety aspects or other specific properties directly related to electric power generation. This document is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.

Solar energy - Solar thermal collectors - Test methods

JIS C 8904-10:2017 光伏设备. 第10部分: 线性度测量方法

Photovoltaic devices -- Part 10: Methods of linearity measurement

JIS C 8904-9:2017 光伏设备. 第9部分: 太阳模拟器的性能要求

Photovoltaic devices -- Part 9: Solar simulator performance requirements

JIS C 8930:2017 光伏(PV)模块的盐雾腐蚀试验

Salt mist corrosion testing of photovoltaic (PV) modules

NF C57-370-3*NF EN 62670-3:2017 光伏聚光器(CPV). 性能试验. 第3部分:性能测量和额定功率

Photovoltaic concentrators (CPV) - Performance testing - Part 3: performance measurements and power rating

NB/T 34044-2017 季节蓄热太阳能热利用工程技术规范

Technical Specifications for Seasonal Storage Solar Thermal Utilization Engineering

NB/T 34043-2017 太阳能热水工程不锈钢常压储热水箱

Solar hot water engineering stainless steel normal pressure hot water storage tank

NB/T 34048-2017 中温真空太阳吸收涂层

Medium temperature vacuum solar absorbing coating

NB/T 34049-2017 太阳能热水工程施工、监理及验收规范

Specifications for construction, supervision and acceptance of solar water heating projects