G93 化工设备 标准查询与下载

DLA A-A-50025 A VALID NOTICE 1-2003 塑料洗衣箱手推车

A-A-50025A, dated 30 September 1992, has been reviewed and determined to be valid for use in acquisition

TRUCK, HAND, BOX, LAUNDRY, PLASTIC

DIN 28017-2:2003 塔和其它容器.第2部分:平台围栏

The document describes railings for platforms on columns and other vessels, preferably for use in chemical plants. The project includes information on dimensions, design and materials of the components.

Columns and other vessels - Part 2: Railings for platforms

DIN 28017-4:2003 塔和其它容器.第4部分:防意外坠落安全装置

The document describes safety devices against unintentioned descent for columns and other vessels, preferably for use in chemical plants. The project includes information on dimensions, design and materials of the components.

Columns and other vessels - Part 4: Safety devices against unintentional descent

DIN 28017-3:2003 塔和其它容器.第3部分:直梯

The document describes vertical ladders for columns and other vessels, preferably for use in chemical plant. The project includes informationl on dimensions, design and materials of the components.

Columns and other vessels - Part 3: Vertical ladders

DIN 28017-1:2003 塔和其它容器.第1部分:带入口平台

The document describes platforms and accesses for columns and other vessels, preferably for use in chemical plants. The standard includes information on dimensions, design and materials of the components.

Columns and other vessels - Part 1: Platforms including accesses

UL 2264 BULLETINS-2003-b (草案)(草案)气态氢产生装置UL安全性标准.评议提交截止日期:2003年2月17日

1 Scope 1 1 This Standard covers portable，stationary and fixed gaseous hydrogen generating appliances，rated 120 V and greater The requirements include the water electrolysis method and other chemical process methods for hyd rogen generation，dispensing，and reformation 1 2 This Standard also covers hyd rogen generation equipment that may or may not include storage means integrated within the product The following list of issues was defined by the STP in order to draft a revised scope ·Size ·Process Hyd rocarbon Processing Water Electrolysis Sodium Borohydride(Chemical Process) ·Application Commercia ndustria Residentia Copyright．by lhe Under~EiLers Laboralories

(Draft)(DRAFT)UL Standard for Safety Gaseous Hydrogen Generation Appliances Comments Due 2/17/2003

HG/T 3176-2002 尿素高压设备制造检验方法.尿素高压设备氨渗漏试验方法

本标准适用于尿素高压设备衬里层材料及其焊缝、管子与管板的焊缝有无穿透性缺陷的检查。

Fabrication and inspection method for High pressure urea equipment ammonia leakage test the method for high pressure urea equipment

HG/T 3175-2002 尿素高压设备制造检验方法.不锈钢带极自动堆焊层的超声检测

本标准适用于采用脉冲反射法对尿素高压设备不锈钢带极自动堆焊层进行接触法超声波检测和厚度测量。

Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel

HG/T 3174-2002 尿素高压设备制造检验方法.尿素级超低碳铬镍钼奥氏体不锈钢的选择性腐蚀检查和金相检查

本标准适用于按HG／T 3173《尿素高压设备制造检验方法 尿素级超低碳铬镍钼奥氏体不锈钢品间腐蚀倾向试验》试验后的试样进行选择性腐蚀检查和金相检查。

Fabrication and inspection method for High pressure urea equipment selective corrosion and metallographic examination on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel

HG/T 3173-2002 尿素高压设备制造检验方法.尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验

本标准是以尿素级超低碳铬镍钼奥氏体不锈钢在65％沸腾硝酸溶液中的腐蚀失重作为检验晶间腐蚀倾向的试验方法。本试验还可以用来考察热处理、焊接工艺对耐腐蚀性能的影响及检测焊缝本身的耐腐蚀性能。

Fabrication and inspection method for High pressure urea equipment intergranular corrosion trend test on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel

HG/T 3172-2002 尿素高压设备制造检验方法.尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取

本标准适用于尿素高压设备尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的取样。如有特殊要求，在协议中另行规定。

Fabrication and inspection method for High pressure urea equipment preparation of the test coupons for the intergranular corrosion trend test on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel

HG/T 3180-2002 尿素高压设备衬里板及内件的焊接工艺评定和焊工技能评定

本标准规定了尿素高压设备耐腐蚀超低碳Cr-Ni-Mo奥氏体不锈钢衬里板和内件的焊接工艺评定、焊工技能评定的基本原则、试验方法和检验要求。 通过焊接工艺评定或焊工技能评定，焊机和焊接材料也同时通过验证。 本标准仅适用于钨极氩弧焊(GTAW)、焊条电弧焊(SMAW)及这两种方法的组合。

Welding procedure qualification and welder performance qualification of cladding and internal for high pressure urea equipments

HG/T 3179-2002 尿素高压设备堆焊工艺评定和焊工技能评定

本标准规定了尿素高压设备尿素级超低碳铬镍钼奥氏体不锈钢堆焊评定的基本规则、试验方法和检验要求。 本标准适用于尿素高压设备尿素级不锈钢埋弧带极-焊条电弧焊堆焊工艺评定、技能评定。 除了满足本标准外，若用户或图纸、技术条件另有要求，应补充到本标准所规定的堆焊评定内容中。

Surfacing procedure qualification and welder performance qualification for high pressure urea equipment

HG/T 3178-2002 尿素高压设备耐腐蚀不锈钢管子-管板的焊接工艺评定和焊工技能评定

本标准规定了尿素高压设备(主要指二氧化碳汽提塔、高压冷凝器、高压洗涤器)耐腐蚀超低碳Cr-Ni-Mo奥氏体不锈钢管子-管板的焊接工艺评定和焊工技能评定的基本原则、试验方法、检验要求。 通过焊接工艺评定或焊工技能评定，焊接设备和焊接材料也同时证明满足使用要求。 本标准仅适用于钨极填丝氩弧焊(GTAW)及焊条电弧焊(SMAW，一般仅用于设备维修)。

Welding procedure qualification and welder performance qualification of corrosion resistant stainless steel tube-tubesheet joints for high pressure urea equipments

DIN 28055-2:2002 化工设备.金属元部件有机材料内衬表面防护.第2部分:适应性验证和检验

The document is to be applied to vessels, equipment, piping components, and other constructions made of metal (bearing) materials in process plants that have an organic lining and are in contact with media.#,,#

Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 2: Proof of suitability and testing

DIN 28055-1:2002 化工设备.金属元部件有机材料内衬表面防护.第1部分:要求

The document is to be applied to vessels, equipment, piping components and other constructions made of metal (bearing) materials in process plants that have an organic lining and are in contact with media.

Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 1: Requirements

DIN 28105:2002 化工设备.双端均为鼓形封头的容器.定义、公称容积、公称直径和主要尺寸

The document applies to all types of chemical equipment, e.g. storage tanks, agitator vessels, heat exchangers and columns, predominantly used in the chemical industry and their related fields of application. It specifies volumes and weights and shall serve as a guideline for the design, inquiry and order. It is not applicable to pipework.#,,#

Chemical equipment - Process equipment and vessels with two domed ends - Definitions, nominal capacity, nominal diameters, main dimensions

CSA B339-02-2002 用于运输危险品的储罐和管子,通用指令1-2号

Bouteilles et tubes utilisés pour le transport des marchandises dangereuses Fiche No 1-2

Bouteilles et tubes utilis閟 pour le transport des marchandises dangereuses Fiche No 1-2

ARMY MIL-PRF-5806 H-2002 直升机桨叶的航运和存储箱

This specification covers requirements for one type of reusable shipping and storage box for helicopter main rotor blades.

BOX, SHIPPING AND STORAGE, HELICOPTER BLADE

ASTM C1533-02 热电解池的通用设计方法标准指南

The purpose of this guide is to provide general guidelines for the design and operation of hot cell equipment to ensure longevity and reliability throughout the period of service. It is intended that this guide record the general conditions and practices that experience has shown is necessary to minimize equipment failures and maximize the effectiveness and utility of hot cell equipment. It is also intended to alert designers to those features that are highly desirable for the selection of equipment that has proven reliable in high radiation environments. This guide is intended as a supplement to other standards, and to federal and state regulations, codes, and criteria applicable to the design of equipment intended for hot cell use. This guide is intended to be generic and to apply to a wide range of types and configurations of hot cell equipment. Intent:1.1.1 The intent of this guide is to provide general design and operating considerations for the safe and dependable operation of remotely operated hot cell equipment. Hot cell equipment is hardware used to handle, process, or analyze nuclear or radioactive material in a shielded room. The equipment is placed behind radiation shield walls and cannot be directly accessed by the operators or by maintenance personnel because of the radiation exposure hazards. Therefore, the equipment is operated remotely, either with or without the aid of viewing.1.1.2 This guide may apply to equipment in other radioactive remotely operated facilities such as suited entry repair areas, canyons or caves, but does not apply to equipment used in commercial power reactors.1.1.3 This guide does not apply to equipment used in gloveboxes.1.2 Caveats:1.2.1 This guide does not address considerations relating to the design, construction, operation, or safety of hot cells, caves, canyons, or other similar remote facilities. This guide deals only with equipment intended for use in hot cells.1.2.2 Specific design and operating considerations are found in other ASTM documents.1.2.3 The system of units employed in this guide shall be the inch-pound unit, also known as U.S. Customary Units. These units are commonly used in the United States of America and defined by the National Institute of Standards and Technology, including certain other units accepted for use with these terms.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for General Design Considerations for Hot Cell Equipment