共找到 307 条与 粉末冶金分析方法 相关的标准,共 21 页
Determination of acid-insoluble content in metal powders iron, copper, tin and bronze powders
Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cemented carbide cobalt powder by flame atomic absorption spectrometry
本文件描述了采用标准漏斗法(霍尔流速计)测定金属粉末(包括硬质合金粉末)流动性的方法。 本文件适用于能自由流过规定孔径的金属粉末流动性的测定。
Metallic powders—Determination of flow rate—Calibrated funnel methods(Hall flowmeter)
本文件描述了硬质合金原料所用难熔金属碳化物和硬质合金总碳量的测定方法。 本文件适用于钨、钽、铌、铬、钒、钛等难熔金属的碳化物及复式碳化物,碳化物与黏结金属组成的混合料(无成型剂)以及由这些混合料生产的预烧结或烧结过的硬质合金中的总碳量的测定,测定范围(质量分数)为4.00%~20.00%。
Hardmetals—Determination of total carbon content—High frequency combustion infrared absorption or thermal conductivity method
本文件规定了锂离子电池正极材料中磁性异物含量和残余碱含量的测定方法。 本文件适用于锂离子电池正极材料中磁性异物含量和残余碱含量的测定。磁性异物含量测定范围为≥1μg/kg,残余碱含量测定范围(质量分数)为0.001%~2.500%。
Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
本文件规定了一种用粉末锻造试样测定金属粉末中的非金属夹杂物水平的金相方法。该测定方法要求粉末锻造试样在锻造时具有尽量小的侧向流动(
Metallic powders—Test method for determination of non-metallic inclusions in metal powders for powder forging
本文件规定了硬质合金中孔隙度、非化合碳缺陷和脱碳相的金相测定方法,包括存在、类型以及分布。
Hardmetals—Metallographic determination of microstructure—Part 4: Characterisation of porosity, carbon defects and eta-phase content
本文件规定了铜基浸渗粉性能特征的检验方法。
Metallic powders, excluding hardmetals—Method for testing copper-base infiltrating powders
本文件规定了金属粉末在规定条件下,在封闭的模具中受到单轴压制时,测定其压缩性的方法。 本文件不适用于硬质合金粉末。
Metallic powders,excluding powders for hardmetals—Determination of compressibility in uniaxial compression
本文件规定了用标准漏斗(古斯塔弗森流速计)测定金属粉末流动性的方法,包括硬质合金粉末、金属粉末与有机添加剂(例如润滑剂)的混合粉末。 本文件适用于测定能够自由流过规定孔径的粉末的流动性。
Determination of flow rate of metallic powders—Calibrated funnel method (Gustavsson flowmeter)
本文件规定了用圆柱形压坯的压缩测定金属粉末压坯强度的方法。 本文件适用于测定金属粉末的成形性。
Metallic powder—Determination of green strength by compression of cylinder compacts
本文件规定了分光光度法测定钴粉中硅量的方法,硅的含量为5μg/g~300μg/g。 本文件适用于硬质合金钴粉中硅量的测定。
Hardmetals—Determination of silicon in cobalt metal powders—Photometric method
本文件规定了使用光学或电子显微镜来测定Ti(C,N)基硬质合金和包含其他立方碳化物相的WC/Co 类硬质合金显微结构的金相测定方法。 本文件适用于烧结后的硬质合金(烧结碳化物硬质合金或金属陶瓷),此种合金的主要硬质相为无机碳化物和氮化物。 本文件也适用于使用截线法测定相尺寸和分布的测试。
Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
GB/T 3488的本部分提供了通过使用光学或电子显微镜的金相检测技术来测量硬质合金晶粒尺寸的方法指南。 本部分适用于以WC为主硬质相的WC/Co硬质合金烧结体(也称为硬质合金或金属陶瓷),也适用于通过截线法测量晶粒尺寸及其分布。 本部分主要包含以下四个方面: ——显微镜的校准,以确保测量精度; ——线性分析法,以获得足够多具有统计意义的数据; ——分析方法,以计算具有代表性的平均值; ——报告,以符合现代质量报告要求。 本部分通过一个测量案例分析来阐述这项推荐性技术(参见附录A)。 本部分不适用于以下几个方面: ——尺寸分布的测定; ——形状的测定,在实现形状测定之前仍需更深入的研究。 矫顽磁力有时可用于测量晶粒尺寸,但本方法仅涉及金相测定法。本方法适用于硬质合金,并不适用于粉末。然而,本方法原则上也可用于测定可进行镶样、制样粉末的平均尺寸。
Hardmetals.Metallographic determination of microstructure.Part 2:Measurement of WC grain size
Sintered metal materials—Determination of the level of cleanliness of powder-metallurgy parts
Inspection rules and test methods of cemented carbide products
Hardmetals—Part 4:Determination of titanium content—Photometric peroxide method
Hardmetals—Abrasion tests for hardmetals
Test method for thermal diffusivity of hardmetal
Hardmetals—Part 3:Determination of cobalt—Potentiometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号