H60 有色金属及其合金产品综合 标准查询与下载

YS/T 873-2013 铝合金抛光膜层规范

本标准规定了铝合金抛光表面阳极氧化膜的术语、定义、性能要求、试验方法、检验规则等、本标准适用于经机械抛光和(或)化学抛光(或电解抛光)的铝及铝合金表面,经阳极氧化、电解着色(或染色)等方式的表面处理后形成的膜(以下简称抛光表面阳极氧化膜)、本标准适用于家具、灯具、电子电器、汽车等行业用铝及铝合金抛光表面阳极氧化膜、

Specification of polishing coating on aluminum alloy

ASTM B899-13 有色金属及合金的相关标准术语

3.1 The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees. 3.2 Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used. 1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02. 1.2 To standardize the terminology used in these documents. 1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

Standard Terminology Relating to Non-ferrous Metals and Alloys

ASTM B483/B483M-13e1 一般用途的铝和铝合金冷拔管和拉制管的标准规格

1.1 This specification covers aluminum and aluminum-alloy drawn tube and drawnpipe in straight lengths and tube in coils for general purpose applications in the alloys (Note 2), and tempers shown in Tables 1 and 2. Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. [2.00 mm] and only in non-heat-treatable alloys.Note 1—For drawn seamless tubes, see Specifications B210 and B210M, for tubes to be used in condensers and heat exchangers, Specifications B234 and B234M, and for seamless pipe, Specification B241/B241M. For extruded structural tube and pipe, see Specification B429.Note 2—this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. 1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Number System alloy designations are those of Table 3 preceded by A9, for example A91060 for aluminum 1060 in accordance with Practice E527. 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

ASTM B811-13(2017) 核反应堆燃料包壳用锻制锆合金无缝管的标准规格

1.1 This specification covers seamless wrought zirconium-alloy tubes for nuclear fuel cladding application, in the outside diameter (OD) size range of 0.200 in. (5.1 mm) to 0.650 in. (16.5 mm) and wall thickness range of 0.010 in. (0.25 mm) to 0.035 in. (0.89 mm). 1.2 Two grades of reactor grade zirconium alloys are described. 1.2.1 The present UNS numbers designated for the two grades are given in Table 1. 1.3 Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. SI values cannot be mixed with inch-pound values. 1.4 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

KS D 8330-2012 锡电镀.规定与试验方法

이 표준은 금속 제품 위의 순수한 전기 주석 도금에 대한 요구 조건들을 규정한다. 그 도금

Electroplated coatings of tin-Specification and test methods

DIN 17007-4:2012 材料编号.第4部分:2组和3组的主要体系:有色金属

Material Numbers - Part 4: System of the Principal Groups 2 and 3: Non-ferrous Metals

KS D 0253-2012 热喷涂涂层厚度的测量方法

이 표준은 용사 제품(이하 제품이라 한다.) 유효면1)의 용사 피막 두께 시험방법에 대하여

Methods for thickness measurement for thermal spraying coatings

YS/T 3002-2012 含金矿石试验样品制备技术规范

本标准规定了含金矿石试验样品制备的技术要求。 本标准适用于含金矿石的选矿、冶金等试验的样品制备。 本标准不适用于含金矿石重选试验、砂金矿石试验的样品制备。

Specification of sample preparation for gold-bearing ore

YS/T 3011-2012 黄金矿开采工程岩石物理力学性质试验技术规范

本标准规定了黄金矿开采工程岩石物理力学性质试验要求、试验工作管理要求及岩石物理力学试验方法、本标准适用于黄金矿开采工程岩石物理与力学性质试验、

Technical specification for test of physical and mechanical characteristics of rocks for gold mining engineering

YS/T 3013-2012 水下黄金矿开采巷道岩体变形观测技术规范

本标准规定了水下黄金矿开采巷道表面收敛观测、钻孔轴向及横向岩体位移观测的要求和内容、本标准适用于水下黄金矿开采巷道岩体变形的观测、

Technical specification for observation of tunnel displacement for the underwater gold mining engineering

DB51/T 1443-2012 贵金属、珠宝玉石首饰专卖店（专柜）等级划分规范

Specifications for Classification of Precious Metals, Jewelry and Jade Stores (Counters)

KS D ISO 3116:2012 镁和镁合金.锻压镁合金

이 표준은 봉, 이형 단면, 튜브 및 중공 단면, 단조물 및 판 형태의 가공용 마그네슘 합

Magnesium and magnesium alloys-Wrought magnesium alloys

ASTM B534-12 铜-钴-铍合金及铜-镍-铍合金厚板材、薄板材、带材和轧制棒材标准规格

1.1 This specification establishes the requirements for plate, sheet, strip, and rolled bar. The following alloys are included: PreviouslyNominal Composition, % Copper AlloyUsed UNS No.DesignationBerylliumCobaltNickelIron C17500 C17510 Alloy 10 Alloy 3 or 140.6 0.4 2.5 ...... 1.8 ... ... C71700 ...0.5 ...31.00.70 1.2 The intent is to provide a system of interchangeable alloys. 1.3 Units8212;Values stated in inch-pound units are to be regarded standard. The values given in brackets are mathematical conversions to SI units, which are provided for information only. 1.4 The following safety hazard caveat pertains only to the test methods described in this specification: 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

KS B ISO 11593:2011 操作型工业机器人.末端执行器自动更换系统.词汇和特性表示

이 표준은 제조 환경에서 사용하는 로봇의 엔드 이펙터 자동 교환 장치에 관련된 용어를 결정

Manipulating industrial robots-Automatic end effector exchange systems-Vocabulary and presentation of characteristics

YS/T 3005-2011 浮选金精矿取样、制样方法

本标准规定了浮选金精矿取样、制样方法、水分测定方法、金精矿评定品质波动试验方法及校核取样精密度试验方法。 本标准适用于散装、袋装浮选金精矿化学成分和水分样品的采取、制备及水分的测定。

Methods for sampling and sample preparation of flotation gold concentrates

YS/T 3006-2011 含金物料氰化浸出锌粉置换提金工艺理论回收率计算方法

本标准规定了含金物料氰化浸出锌粉置换提金工艺过程理论回收率计算方法。 本标准适用于金矿石、浮选金精矿、或金矿石、浮选金精矿经焙烧、生物氧化及其他工艺预处理后氰化浸出锌粉置换提金工艺过程。

Calculation methods of gold recovery rate of cyanide leaching and zinc dust precipitation

YS/T 3004-2011 金精矿

本标准规定了金精矿的技术要求、检验方法、检验规则、包装、质量预报单和订货单（或合同）内容。 本标准适用于经浮选所得的金精矿。

Gold concentrate

ASTM E539-11 利用 X 射线荧光光谱法分析钛合金的标准试验方法

This method is suitable for providing data on the chemical composition of titanium alloys having compositions within the scope of the standard. It is intended for routine production control and for determination of chemical composition for the purpose of certifying material specification compliance. Additionally, the analytical performance data included with this method may be used as a benchmark to determine if similar X-ray spectrometers provide equivalent precision and accuracy.1.1 This test method covers the X-ray fluorescence analysis of titanium alloys for the following elements in the ranges indicated: ElementMass Fraction Range, % Aluminum0.041 to 8.00 Chromium0.013 to 4.00 Copper0.015 to 0.60 Iron0.023 to 2.00 Manganese0.003 to 9.50 Molybdenum0.005 to 4.00 Nickel0.005 to 0.80 Niobium0.004 to 7.50 Palladium0.014 to 0.200 Ruthenium0.019 to 0.050 Silicon0.014 to 0.15 Tin0.017 to 3.00 Vanadium0.017 to 15.50 Yttrium0.0011 to 0.0100 Zirconium0.007 to 4.00 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10.

Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

ASTM B898-11 活性和耐熔金属复合板的标准规格

1.1 This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium, tantalum, niobium, and their alloys. The material generally is intended for pressure vessel use. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. The values in parentheses and in metric tables are provided for information only.

Standard Specification for Reactive and Refractory Metal Clad Plate

DB44/T 837-2010 锂离子电池用电解铜箔

本标准规定了锂离子电池用电解铜箔的术语和定义、产品分类、要求、试验方法、检验规则及包装、标志、贮存及运输。 本标准适用于锂离子电池用电解铜箔。

Electrolytic Copper Foil for Li-ion Batteries