J28 自动化物流装置 标准查询与下载

KS T 2004-2011 物流设施的设备标准

이 표준은 물류 표준화를 위한 물류 시설[보관 창고, 처마(차양) 등]의 교차점에서 단위화

Equipments standards of logistics facilities

KS T 2010-2010 物流中心的设施标准

이 표준은 물류 합리화를 위한 물류센터에서 단위화물에 의한 보관, 적재, 입출고 작업을 하

Facilities standards of logistics centers

KS T 0001-2010 物流术语

이 표준은 물류 활동에 사용되는 주된 용어와 그 뜻에 대하여 규정한다.

Glossary of terms for physical distribution

DIN EN ISO 10218-1:2007 工业机器人.安全要求.第1部分:机器人

This part of ISO 10218 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots, as defined in Clause 3. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these hazards. Noise as a potential hazard is not dealt with in this part of ISO 10218, but will be fully covered in Part 2. This part of ISO 10218 does not apply to non-industrial robots although the safety principles established in ISO 10218 may be utilized for these other robots. Examples of non-industrial robot applications include, but are not limited to: undersea, military and space robots, tele-operated manipulators, prosthetics and other aids for the physically impaired, micro-robots (displacement < 1 mm), surgery or healthcare, and service or consumer products. NOTE 1 Requirements for robot systems, integration, and installation are covered in Part 2. NOTE 2 Additional hazards may be created by specific applications (e.g. welding, laser cutting, machining). These hazards may need to be considered during robot design.

Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006); German version EN ISO 10218-1:2006

NF E61-110-1:2006 工业环境的机器人.安全要求.第1部分:机器人

Robots for industrial environments - Safety requirements - Part 1 : robot.

ISO 17874-4:2006 放射性物质用遥控装卸设备.第4部分:动力机械手

This part of ISO 17874 defines the main features of power manipulators for use in ionizing radiation fields. It outlines basic principles which relate to the design and testing of power manipulators for use behind shielding walls, mainly in hot cells.

Remote handling devices for radioactive materials - Part 4: Power manipulators

JIS B 0187:2005 服务用机器人.词汇

この規格は，サービスロボットに関して用いる主な用語及び定義について規定する。

Service robot -- Vocabulary

KS B ISO 9980:2005 带传动.V形槽带(以有效宽度为基础的系列).槽形检验

이 규격은 유효 너비를 기초로 한 시스템으로 규정된 V벨트용 홈과 풀리가 규격에 맞는지를

Belt drives-Grooved pulleys for V-belts(system based on effective width)-Geometrical inspection of grooves

ISO 17874-2:2004 放射性物质用遥控装卸设备.第2部分:仿效机械手

This part of ISO 17874 specifies the criteria for the selection, installation and use of a mechanical master-slave manipulator, for remote handling of radiaoactive materials in a nuclear facility. This part of ISO 17874 deals only with the technical aspects related to the manipulator and its interface with the nuclear facility in which it is intended to be installed. In particular, the process apparatus and the manipulator features need to be studied in parallel in order to optimize all the functionalities of the manipulator. However, this part of ISO 17874 does not cover the fundamental design criteria of the nuclear facility (e.g. the process involved, maintenance of the process equipment, intervention for other purposes).

Remote-handling devices for radioactive materials - Part 2: Mechanical master-slave manipulators

BS EN ISO 9409-2:2004 操作型工业机器人.机械接口.轴

ISO 9409-2:2002 defines the main dimensions, designation and marking for a shaft with cylindrical projection as mechanical interface. It is intended to ensure the exchangeability and to keep the orientation of hand-mounted end effectors. ISO 9409-2:2002 does not contain any correlation of load-carrying ranges. The mechanical interfaces specified in ISO 9409-2:2002 will also find application in simple handling systems which are not covered by the definition of manipulating industrial robots, such as pick-and-place or master-slave units.

Manipulating industrial robots - Mechanical interfaces - Shafts

NF E61-131:2004 操作工业机器人.机械接口.第1部分:板

Manipulating industrial robots - Mechanical interfaces - Part 1: plates

ANSI/ASME B89.4.22-2004 铰接臂坐标测量机械的性能评价方法

Pertains to the performance evaluation of articulated arm CMM while any number of rotational joints can be evaluated, the Standard focuses on the more common configurations commercially available today, and is limited to seven joints.

Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines

KS T 0007-2002 物流设备的安全标志

이 규격은 물류기기류 사용시 안전한 작업과 산업 재해의 예방을 위한 물류기기류의 안전 표지

Safety marking for logistics equipments

BS EN ISO 14539:2002 操作工业机器人.带抓爪的物料搬运设备.词汇和特征表示

Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics

JIS B 0185:2002 智能机器人.词汇

この規格は知能ロボットに関して用いる主な用語及び定義について規定する。備考 知能ロボットとは，人や動物がもっ論理的推論，学習。認識・理解などの知的機能の全部，又は一部を備えているロボットである。

Intelligent robots -- Vocabulary

AIA/NAS NASM33781-2001 FSC 53GP型凹陷尺寸十字形传动器

PER NAS1347, TYPE IV ON TOP OR SIDE OF HEAD

Recess - Offset Cruciform, Dimensions of Recess, Gage and Driver for Rev 2

KS T 0002-2000 物流机械类的安全通则

이 규격은 물류 기계류에 관계되는 작업자 및 주위에 있는 사람의 상해를 방지하기 위해서 물

Safty standard of logistics equipments and tools

BS EN ISO 9787:1999 操纵工业机器人.坐标系和运动术语

This International Standard defines and specifies robot coordinate systems. It also provides a nomenclature including notation for the basic robot motions. It is intended to aid in robot alignment, testing, and programming. This International Standard applies to all manipulating industrial robots as defined in ISO 8373. In cases where there is no risk of confusion, nomenclatures or subscripts other than those specified in this International Standard may be used.

Manipulating industrial robots - Coordinate systems and motion nomenclatures

AIA/NAS NASM33750-1998 FSC 53GP型凹陷尺寸狭槽圆锥传动器

NAM13 12-105, “Fastener Test Methods Method 105 Stress Durability” was adopted on 29 August 1997 for use by the Department of Defense @OD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center Aircraft Division, Code 4141OOB120-3 Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard fi-om the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. The private sector and other Government agencies may purchase copies fi-om the Aerospace Industries Association, 1250 Eye Street NW, Washington, DC 20005.

Recess-Dovetail, Slot and Conical Dovetail Slot, Dimensions of Recess, Gage and Driver for

JIS B 0144:1997 PCB(印制电路板组装机器人.词汇

PCB (printed circuit board) assembly robots -- Vocabulary