共找到 166 条与 冷却系统与加热装置 相关的标准,共 12 页
Internal combustion engines—Charge air coolers—Specification
GB/T 6809的本部分规定了往复式内燃机冷却系统术语。 ISO 2710对往复式内燃机进行了分类,并对这些内燃机的基本词汇及其特征进行了定义。
Reciprocating internal combustion engines.Vocabulary of components and systems.Part 5:Cooling systems
GB/T 6809制定了往复式内燃机零部件和系统词汇,GB/T 6809的本部分规定了冷却系统及其零部件的相关术语。
Reciprocating internal combustion engines.Vocabulary of components and systems.Part 5:Cooling systems
本标准规定了内燃机增压空气冷却器的术语和定义、符号和缩略语、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于汽车、拖拉机、工程机械用内燃机增压空气冷却器(以下简称中冷器)。其他用途的内燃机增压空气冷却器也可参照使用。
Internal combustion engines.Charge air coolers.Specification
本标准规定了对高频介质加热设备的各项要求,包括产品分类、技术要求、试验方法、检验规则、技 术分级、标志、包装、运输、贮存、订购和供货等。本标准适用于频率为1~300MHz、输出功率大于或等于50W的高频介质加热设备(以下简称设备)。该设备可在自然气氛、保护气氛和真空中,对诸如塑料、木材、橡胶、织品、玻璃、陶瓷、纸张、食品等部分导电性或非导电性材料进行加热、软化、热合和干燥等热加工工艺。设备的产品标准应根据本标准制订。
Basic specifications for electroheat installations.high frequency dielectric heating installations
本标准规定了铁制旋启式止回阀的结构型式、技术要求、试验方法、标志、包装、运输、贮存等基本要求。 本标准适用于公称压力PN0.25~4.0MPa,公称通径DN50~1800mm,温度不高于350℃,工作介质为蒸汽、空气和水,法兰连接的灰铸铁和球墨铸铁制旋启式止回阀(以下简称止回阀)。
Teneral purpose industrial valves.Cast iron swing check valves
本标准适用于拖拉机和农用固定式、移动式柴油机冷却水用的管片式水散热器。
Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines
本标准适用于拖拉机和农用固定式、移动式柴油机冷却水用的管片式水散热器型号。
Cooling water radiators for tractor diesel engines--Method of identification symbols
Technical specifications of silicone oil fan clutch for internal combustion engines
Technical specifications of plastic wind guard for internal combustion engine cooling fan
Internal combustion engine exhaust gas recirculation cooler (EGRC) test method
Internal combustion engine exhaust gas recirculation cooler (EGRC) test method
本标准规定了冷凝式内燃机冷却风扇的试验项目、方法、内容、数据计算、结果分析以及文件整理的要求。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。
Cooling fan for internal combustion engines.Part 4: Test method for cooling fan of condensing engines
JB/T 6003的本部分规定了内燃机机油冷却器(以下简称冷却器)在给定条件下,冷、热流体的进出口温度、流量和压差的测定方法以及性能参数的计算方法。 本部分适用于汽车、拖拉机、工程机械、小型船舶、发电机组、液压传动等配套的各种结构型式的冷却器,其他用途结构类似的冷却器亦可参照执行。
Internal combustion engines.Oil coolers.Part 3:Test method for heat transfer capability
Internal combustion engine cooling fans Part 1: Technical conditions for metal cooling fans
本标准规定了冷凝式内燃机冷却风扇的分类、命名、技术要求、检验规则以及标志、包装和贮存。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。
Cooling fan for internal combustion engines.Part 3: Specifications for cooling fan of condensing engines
Process specifications for remanufactured internal combustion engine water pumps
Cooling water pumps for internal combustion engines Part 8: Variable cooling water pumps
Cooling water pumps for internal combustion engines Part 9: Electric cooling water pumps
Water tanks for small and medium power internal combustion engines Part 2: Technical conditions for non-metallic water tanks
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号