K36 低压配电用器具 标准查询与下载

DIN 43627-3:1998 地下用的室内接线盒.规格00-100A 500V和规格1-250A 500V HRC熔断器的型平齐式室内接线盒

The document refers to sizes of flush-type house connection boxes for underground service.

House connection boxes for underground service - Flush-type house connection boxes for underground service for HRC-fuses size 00 up to 100 A 500 V and size 1 up to 250 A 500 V

JB/T 8752-1998 自耦减压起动控制装置

　　本标准规定了自耦减压起动控制装置的使用类别为AC-3(用于笼型感应电动机的起动和在运转中的分断)。它既不能用于AC-4(用于笼型感应电动机的起动、点动、反接制和反转)，也不能用于频繁通断的工作制或电动机的突然反转。 　　本标准规定了自耦减压起动控制装置的使用条件、类别、技术要求、试验方法、检验规则、标志、包装、运输与贮存。 　　本标准适用于频率50Hz(或60Hz)，额定电压交流1000V(1140V)及以下的自耦减压起动控制装置，该起动装置用来起动并加速交流笼型感应电动机至额定速度，并对电动机和与它相关联的电路的操作、过载、短路进行保护，以及人为地使电动机停止。 　　注:1140V仅限于煤矿井下使用。

Auto-transform start controlgear

DIN 15565-8:1998 电力和电视制作工作台的配电设备.第8部分:多芯电缆系统

The document applies for multicore systems for connecting and current distributing for more than one electric circuit for projectors for use in production workstations for film and television.

Electric power-distribution equipment for production workstations for film and television - Part 8: Multicore systems

JIS C 4620:1998 组合式高压配电设备

Cubicle type high voltage power receiving units

DIN VDE 0603-2:1998 400V交流的用户配电盘和仪表板.干线分线端子

Customer distribution boards and meter panels AC 400 V - Main line branch terminals

JB/T 8663-1997 倒顺开关

本标准规定了倒顺开关的基本性能和要求。包括：型号、规格、标志、正常工作条件和安装条件、技术要求、试验方法、检验规则。 本标准适用于交流50 Hz、额定工作电压380V及以下、额定工作电流25 A及以下的HY2等系列倒顺开关。该开关主要用作直接通断单台鼠笼式感应电动机，使其正转、反转和停止。

Inverted switch

DIN VDE 0660-507:1997 用外推法评估经部分型号检验的低压开关控制装置组件温升

A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890:1987 + Corrigendum 1988 + A1:1995); German version HD 528 S2:1997

JB/T 8593-1997 电器附件暗装用面板、调整板和安装盒

本标准适用于额定电压不超过交流440V、额定电流不大于32A、家用及类似环境用暗装式的电器附件，如开关、插座、电铃按钮等所用的面板、调整板和安装盒。 电器附件暗装用的面板、调整板和安装盒，适于在一般不超过35℃，偶尔会达到40℃的环境温度下使用。 本标准亦适用于安装或悬吊照明设备用的安装盒。 本标准不适用于装有过电流保护装置的组合电器附件，也不适用于汇流条线槽型的电器附件。

Panels, adjusting plates and mounting boxes intended to be used in concealed installation of electric accessories

UL 65-1997 配电箱

Covers wired cabinets for use in accordance with the American National Standard National Electrical Code. Covers display cases and special-purpose cabinets containing electrical wiring, with or without illumination by incadescent or electric-discharge lamps, including quick-starting and high-voltage lamps operating in multiple at potential of 1000 volts or less.

Wired cabinets

NF C14-100:1996 低压电源装置

Low-voltage mains installations.

IEC 61084-2-1:1996 电气装置用电缆槽和管道系统 第2部分:特殊要求 第1节:安装在墙上或天花板上的电缆槽和管道系统

Specifies requirements or cable trunking and ducting systems intended for mounting on walls or ceilings. The systems are intended to be mounted directly on walls or ceilings, flush or semiflush, or indirectly on walls or ceilings.

Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings

DIN 89250:1995 分线盒.16A 500V、防护等级 IP 56

Junction boxes - 16 A, 500 V, degree of protection IP 56

JIS C 8328:1995 家用低压配电盘

Low voltage panelboards for household use

JIS C 8366:1995 照明配电通道

Lighting busways

UL 891-1994 不露带电部分的配电盘

Dead-front switchboards

UL 67-1993 配电盘

These requirements cover panelboards to be employed in accordance with the National Electrical Code, NFPA 70. These requirements cover panelboards for the control and protection of electric lighting and appliance branch circuits, and power circuits, including feeder distribution panelboards. They also cover units specifically designed for panelboard assembly. These requirements do not cover: a) Distribution equipment which sole function is the automatic or nonautomatic transferring of one or more load conductor connections from one power source to another. Reference the Standard for Transfer Switch Equipment, UL 1008. b) Factory wired assemblies of industrial control equipment intended to control industrial processes. Reference the Standard for Industrial Control Panels, UL 508A. c) Distribution equipment containing only one circuit subdivision, unless also provided with a meter socket. See 6.5.1. Reference the Standard for Molded-Case Circuit Breakers, Molded- Case Switches and Circuit-Breaker Enclosures, UL 489. d) Distribution equipment intended to serve as a means for distributing power required to operate mobile or temporarily installed equipment. Reference the Standard for Power Outlets, UL 231. e) Factory wired assemblies of controllers, timers, temperature regulating equipment and such, intended for control of equipment for use with swimming pools, hot tubs, and/or spas. Reference the Standard for Electric Hot Tubs, Spas and Associated Equipment, UL 1563. f) Factory wired assemblies intended for the control of Architectural and Floating Fountains. Reference the Standards for Motor-Operated Water Pumps, UL 778, Underwater Lighting Fixtures, UL 676 and Industrial Control Panels, UL 508A. g) Portable power distribution equipment. Reference the Standard for Portable Power-Distribution Equipment, UL 1640.

Panelboards

UL 1703-1993 平板光电器件组件和配电盘

Flat-plate photovoltaic modules and panels

UL 65-1993 配电箱

Wired cabinets

DIN 43871:1992 63A 以下的机内装设备的消耗装置

The document is intended to ensure proper installation and connection of built-in equipment up to 63 A with dimensions in accordance with DIN 43880 into consumer units in accordance with DIN VDE 0603.

Consumer units for built-in equipment up to 63 A

DIN 43868-3:1992 工地普通配电柜.400V接线柜.630A互感器测量

The document applies to incoming supply and metering ACS 400 V (630 A secondary metering). The object is to lay down the built-in components in accordance with EN 60439-4-1990, sub-clause 9.1 and the dimensions.#,,#

Assemblies for Construction Sites (ACS); incoming supply and metering ACS 400 V, 630 A; secondary metering