M62 广播、电视网结构 标准查询与下载



共找到 268 条与 广播、电视网结构 相关的标准,共 18

This International Standard specifies the general channel assignment for multichannel audio formats. The general channel assignment as a channel mapping and labeling provides the unified usage of channel assignments for source devices@ digital audio interfaces and sink devices. This standard excludes the specification of the exact position of each loudspeaker. It is aimed at consumer applications@ but is not targeted for theatrical environments. Up to 32 labels for loudspeaker positions are specified@ which can be used for all current multichannel formats.

Audio, video and multimedia systems - General channel assignment of multichannel audio

ICS
33.160.30
CCS
M62
发布
2011-04
实施
2011-04-14

Application of equipotential bonding and earthing in buildings with information technology equipment.

ICS
29.120.50;91.140.50
CCS
M62
发布
2011-03-01
实施
2011-03-02

Ground-based VHF hand-held, mobile and fixed radiotransmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation - Part 1 : technical characteristics and methods of measurement (V1.5.1).

ICS
33.060.20;33.100.01
CCS
M62
发布
2010-12-01
实施
2010-12-03

Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions (IEC 60728-13:2010); German version EN 60728-13:2010, Corrigendum to DIN EN 60728-13 (VDE 0855-13):2010-10; (IEC-Co

ICS
33.060.40
CCS
M62
发布
2010-12
实施

Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks (IEC 60728-1-1:2010); German version EN 60728-1-1:2010

ICS
33.060.40
CCS
M62
发布
2010-12
实施
2010-12-01

Cable networks for television signals, sound signals and interactive services - Part 1-1 : RF cabling for two way home networks.

ICS
33.060.40
CCS
M62
发布
2010-10-01
实施
2010-10-08

This specification describes the PSTIB PHY and DLL layer requirements and protocols on the HFC plant and managed OSP power supplies and related hardware. This specification is part of the suite of specifications developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. Significant changes with respect to the previous edition are in Clause 7, Alternative power supply to transponder interface bus - Physical layer specification.

Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) (IEC 60728-7-3:2009); English version EN 60728-7-3:2009

ICS
33.060.40
CCS
M62
发布
2010-03
实施
2010-03-01

This document provides the performance requirements that shall be fulfilled in operation at system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems.

Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation (IEC 60728-1-2:2009); German version EN 60728-1-2:2009

ICS
33.060.40
CCS
M62
发布
2010-02
实施
2010-02-01

The radio data system (RDS) is intended for application to VHF/FM sound broadcasts in the range 87,5 MHz to 108,0 MHz which may carry either stereophonic (pilot-tone system) or monophonic programmes.

Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz

ICS
33.170
CCS
M62
发布
2009-12-04
实施

Cable networks for television signals, sound signals and interactive services - Part 8 : electromagnetic compatibility for networks.

ICS
33.060.40;33.100.01
CCS
M62
发布
2009-10-01
实施
2009-10-02

Countries around the world are in the process of migrating from analogue to digital broadcasting techniques for both television and radio. This Report looks at sound broadcasting in the bands below 30 MHz. It briefly examines the underlying reasons for the migration and looks at the technologies involved. Its focus is the DRM system as developed for use in the LF, MF and HF bands. The Report is intended to: 1) Explain why and how a broadcaster might go digital. 2) Be a reference technical document for DRM planning. 3) Provide new information based on the practical experience in DRM. 英:planning parameters;coverage;digital radio mondiale;broadcasting;frequency

Planning parameters and coverage for Digital Radio Mondiale (DRM) broadcasting at frequencies below 30 MHz

ICS
CCS
M62
发布
2009-05-01
实施

Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for digital terrestrial television (Endorsement of the English version EN 300744 V1.6.1 (2009-01) as German standard)

ICS
33.170
CCS
M62
发布
2009-05
实施

The ITU Radiocommunication Assembly considering a) that frequency allocations to the broadcasting-satellite service (BSS) (sound) and complementary terrestrial broadcasting exist in bands near 1.5, 2.3 and 2.6 GHz for digital sound broadcasting to portable and vehicular receivers; b) that all three of the allocated bands contain allocations to certain terrestrial services, and that the 2.6 GHz band also contains an allocation to the fixed-satellite service (space-to-Earth) in Regions 2 and 3 and to the mobile-satellite service (Earth-to-space); c) that it is necessary to ensure that the introduction of the BSS (sound) and complementary terrestrial broadcasting proceeds in a flexible and equitable manner; d) that this objective is addressed by Resolution 528 (Rev.WRC-03), which calls for the convening of a competent conference for the planning of the broadcasting-satellite service (sound) in the allocated bands, and the development of procedures for the coordinated use of complementary terrestrial broadcasting; e) that Resolution 528 (Rev.WRC-03) also specifies a coordination procedure to be used for the introduction of digital sound broadcasting-satellite systems in the interim period prior to the conference, and that the calculation methods and interference criteria to be employed in the application of this procedure be based upon relevant ITU-R Recommendations; f) that Resolution 528 (Rev.WRC-03) calls upon the conference cited in considering d),above, to review the criteria for sharing with other services.

Frequency sharing issues related to the introduction of the broadcasting-satellite service (sound) in the frequency range 1-3 GHz

ICS
CCS
M62
发布
2009-01-01
实施

The ITU Radiocommunication Assembly considering a)that Recommendation ITU-R BS.412 specifies planning standards for terrestrial FM sound broadcasting at VHF, including the conditions for average multiplex signal levels and peak deviation;b)that audio signal processing techniques have rapidly developed in the last few years, based on advances of digital signal compression techniques, and are widely used in sound broadcasting to increase the subjective sound level/programme loudness;c)that listeners desire audio programmes to be uniform in subjective sound level/programme loudness.

Impact of audio signal processing and compression techniques on terrestrial FM sound broadcasting emissions at VHF

ICS
CCS
M62
发布
2009-01-01
实施

The ITU Radiocommunication Assembly considering a)that there is a continuing need to improve and develop field strength prediction techniques for the planning or establishing of terrestrial broadcasting, fixed (broadband access) and mobile services using frequencies above 30 MHz; b)that for terrestrial broadcasting, fixed (broadband access) and mobile services, propagation studies involve consideration of point-to-area and multipoint-to-multipoint propagation paths.

PROPAGATION PREDICTION METHODS FOR TERRESTRIAL BROADCASTING FIXED (BROADBAND ACCESS) AND MOBILE SERVICES USING FREQUENCIES ABOVE 30 MHZ

ICS
CCS
M62
发布
2009-01-01
实施

Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment (IEC 60728-5:2007); German version EN 60728-5:2008

ICS
33.060.40
CCS
M62
发布
2008-11
实施
2008-11-01

Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths (IEC 60728-1:2007); German version EN 60728-1:2008

ICS
33.060.40
CCS
M62
发布
2008-11
实施
2008-11-01

Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks (IEC 60728-4:2007); German version EN 60728-4:2008

ICS
33.060.40
CCS
M62
发布
2008-11
实施
2008-11-01

This part of IEC 60728 is applicable to any cable network (including individual receiving systems) having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz. This standard specifies the basic methods of measurement of the operational characteristics of cable network having coaxial cable outputs in order to assess the performance of these systems and their performance limits. All requirements refer to the performance limits, which shall be obtained between the input(s) to the headend or headends and any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies at the subscriber’s end of the subscriber’s feeder. Also the requirements which are obtained between the input(s) to the headend or headends and any home network interface (HNI) are given. NOTE 1 Methods of measurement described in this standard are considered as basic. However, any equivalent method that ensures at least the same accuracy may be used. NOTE 2 If the system operator wishes to subdivide the system into a number of parts or wishes to use different transmission media (for example, coaxial cabling, balanced cabling, optical cabling), the accumulation of degradations should not exceed the figures given in this standard. NOTE 3 System performance requirements of return paths as well as specific methods of measurement for the use of the return paths in cable networks are described in IEC 60728-10. Clause 5 defines the system performance limits which will, with an unimpaired input, (headend input signal), produce picture and sound signals (at system outlets) where the impairment to any single parameter will be not worse, in normal operating conditions for any analogue channel, than Grade four on the five-grade impairment scale contained in ITU-BT 500-10. For digitally modulated signals, the quality requirement is a quasi-error-free (QEF) reception. Appropriate performance requirements for the signals at the receiving antennas site are given in Clause 6 in order to provide at the input of the headend of the cable network both analogue and digital television signals with suitable quality. Clause 7 is applicable to home networks (including those of individual receiving systems) using coaxial cables, balanced cables or optical cables and primarily intended for television signals, sound signals and interactive services, operating between about 30 MHz and 3 000 MHz. This clause, considering the basic operational characteristics of a home network, specifies the requirements which shall be obtained at the home network interface (HNI) taking into account the performance requirements given at the system outlet or at the terminal input.

Cable networks for television signals, sound signals and interactive services - System performance of forward paths

ICS
33.060.40
CCS
M62
发布
2008-08-29
实施
2008-08-29

Digital Video Broadcasting (DVB) - Framing Structure, channel coding and modulation for Satellite Services to Handheld devices (SH) below 3 GHz (Endorsement of the English version EN 302583 V1.1.1 (2008-03) as German standard)

ICS
33.170
CCS
M62
发布
2008-07
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号