共找到 320 条与 航天器用能源设备 相关的标准,共 22 页
This standard establishes the quality requirements and provides methods for establishing the qualification of solar panels. Section 7 describes specific tests necessary to ensure the quality and reliability of solar panels intended for space application. Section 8 describes specific solar panel characterization tests necessary to characterize the performance of solar panels intended for space application. Section 9 describes the quality requirements for panels to be qualified to this standard. Section 11 describes the reporting format for the qualification tests in Section 7 and the data sheet characterizations in Section 8.
Qualification and Quality Requirements for Space Solar Panels
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL, USED WITH COMMUNICATION EQUIPMENTS, STANDARD TOLERANCES FOR
Series for module DC/DC converter
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://www.dodssp.daps.mil.
PLUG ASSEMBLY - INSTRUMENTAL ELECTRICAL
A-A-59308, dated 24 August 1998, has been reviewed and determined to be valid for use in acquisition
CLINOMETERS, SHIP, AND ACCESSORIES
This commercial item description (CID) covers a complete portable cutting and welding torch outfit suitable for use with acetylene and methylacetylene-propadiene (MAPP) gas when either gas is coupled with oxygen. The torch outfit is intended for use either indoors or outdoors.
TORCH OUTFIT, CUTTING AND WELDING
MIL-HDBK-682, dated 12 July 1991, has been reviewed and determined to be valid for use in acquisition
TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
A-A-59338A, dated 14 April 1999, has been reviewed and determined to be valid for use in acquisition
WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
PPP-C-795D, dated 13 June 1994, is hereby reactivated and may be used for new or existing design acquisitions.
CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR LONG DISTRIBUTION CYCLES) [Use In Lieu Of: NAVY PPP-C-00795]
This CID covers the general requirements for active delay lines. Active delay lines covered by this CID are intended for commercial/industriaI applications.
DELAY LINES, ACTIVE, GENERAL REQUIREMENTS FOR
This CID covers the general requirements for a passive delay lines. Passive delay lines covered by this CID are intended for commercial/industrial applications.
DELAY LINE, PASSIVE, GENERAL REQUIREMENTS FOR
MIL-PRF-83531B, dated 15 December 1998, has been reviewed and determined to be valid for use in acquisition
DELAY LINES, PASSIVE, GENERAL SPECIFICATION FOR
MIL-PRF-81757D, dated 1 March 1999, has been reviewed and determined to be valid for use in acquisition
BATTERIES AND CELLS, STORAGE, NICKEL-CADMIUM, AIRCRAFT GENERAL SPECIFICATION FOR
A-A-50047A, dated 15 December 1992, has been reviewed and determined to be valid for use in acquistion.
DRY CLEANING UNIT ASSEMBLY, DRY TO DRY, PERCHLOROETHYLENE SOLVENT
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.
LOOPS, SLIDE (FOR EQUIPAGE)
A-A-50506A, dated 0 DECEMBER 1982, has been reviewed and determined to be valid for use in acquisition.
FAN, TUBEAXIAL, MINIATURE, FOR COOLING ELECTRONIC EQUIPMENT
This commercial item description (CID) covers siphon-feed cup and pressure-feed tank containers used with paint spray equipment. The siphon-feed cup is attached directly to a spray gun. The pressure-feed tank is used to hold fluid under pressure until released through a remote-operated spray gun. Both types are used for spraying materials such as enamel, lacquer, varnish, and fluids of similar viscosity range (see 3.3).
CONTAINERS, FLUID, FOR PAINT SPRAY EQUIPMENT [Superseded: DLA RR-C-550 D CANC NOTICE 1, DLA RR-C-550 D (1), DLA RR-C-550 D, DLA RR-C-550 C, DLA RR-C-550 B, DLA RR-C-550 A, DLA RR-C-550 (1), DLA RR-C-550]
This specification covers the general requirements for rechargeable aircraft storage batteries. The batteries are nominal 24-volt batteries that are generally used for medium current engine starting/utility applications, have non-removable covers, and designed for maintenance-free operation (see 6.15.10).
BATTERY STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR
This amendment forms a part of MIL-W-15805F (AS), dated 10 December 1962, and is approved for use by all Departments and Agencies of the Department of Defense.
WIND DIRECTION AND WIND SPEED INDICATING EQUIPMENT, TYPE B
This amendment forms a part of MIL-W-22900A (AS), dated 15 February 1966, and has been approved by the Naval Air Systems Command, Department of the Navy. It is available for use by all Departments and Agencies of the Department of Defense.
WIND DIRECTION AND WIND SPEED INDICATING EQUIPMENT, TYPE F
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号