CSA/ANSI LC 4:22 • CSA 6.32-2022
用于燃气分配系统的压接金属配件和阀门

Press-connect metallic fittings and valves for use in fuel gas distribution systems

标准号

CSA/ANSI LC 4:22 • CSA 6.32-2022

发布

2022年

发布单位

SCC

当前最新

CSA/ANSI LC 4:22 • CSA 6.32-2022

 

 

代替标准

75.160.30 75.200

被代替标准

ANSI LC 4-2012/CSA 6.32-2012

适用范围

1 Scope 1.1 This Standard applies to metallic (copper, steel, stainless steel, and malleable iron) press-connect type fittings, and valves (hereafter referred to as fittings unless otherwise specified) for use with fuel gas systems intended for installation above ground, below ground, indoors, and outdoors. 1.2 This Standard applies to fuel gas systems rated for operating pressures not exceeding 125 psi (862 kPa). 1.3 This Standard applies to fittings intended for use with fuel gas systems 3/8 in through 4 in nominal size. 1.4 Fittings and other components complying with the provisions of this Standard shall be considered as having an ambient temperature range of minus 40 °F (-40 °C) to 180 °F (82.2 °C). 1.5 This Standard includes requirements to establish the suitability for use in concealed locations (see Clause 3). 1.6 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.7 If a value for measurement as given in this Standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification. This document is based on yard/pound quantities with SI equivalents provided as a guide for making metric conversions. Note: See Annexes A and B.

CSA/ANSI LC 4:22 • CSA 6.32-2022相似标准

推荐