ELBOW, TUBE - 90? BULKHEAD, FLARED TUBE, UNIVERSAL TO FLARELESS TUBE FSC 4730; Should Be Used Instead of MS24652, Which Was Cancelled on 2 August 1999BREAK ALL SHARP EDGES AND REMOVE ALL BURRS AND SLIVERS.DIMENSIONS ARE IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES, DECIMALS ±.016, ANGLES±2°.PART NUMBERS:NO CODE LETTER IN PART NUMBER FOR CARBON STEEL.ADD “D” AFTER DASH NUMBER FOR ALUMINUM ALLOY (2024).ADD “W” AFTER DASH NUMBER FOR ALUMINUM ALLOY (7075).ADD “J” AFTER DASH NUMBER FOR CORROSION RESISTANT STEEL TYPE 304.ADD “K” AFTER DASH NUMBER FOR CORROSION RESISTANT STEEL TYPE 316.ADD “T” AFTER DASH NUMBER FOR TITANIUM ALLOY (6AL-4V).ADD “R” AFTER DASH NUMBER FOR CORROSION RESISTANT STEEL TYPE 321.EXAMPLES OF PART NUMBERS:MS24652-4-ELBOW, 1/4 TUBING, CARBON STEEL.MS24652-8D-ELBOW, 1/2 TUBING, ALUMINUM ALLOY (2014) (2024).MS24652-8W-ELBOW, 1/2 TUBING, ALUMINUM ALLOY (7075).MS24652-8J-ELBOW, 1/2 TUBING, CORROSION RESISTANT STEEL, TYPE 304.MS24652-8K-ELBOW, 1/2 TUBING, CORROSION RESISTANT STEEL, TYPE 316.MS24652-8T-ELBOW, 1/2 TUBING, TITANIUM ALLOY, 6AL-4V.MS24652-8R-ELBOW, 1/2 TUBING, CORROSION RESISTANT STEEL, TYPE 321.ITEMS CODED “C” ON PREVIOUS ISSUES OF THIS STANDARD ARE NO LONGER TO BE FURNISHED. UNLESSOTHERWISE SPECIFIED, PARTS CODED J, K, OR R (AT SUPPLIER’S OPTION) SHALL BE FURNISHED IN LIEUOF “C” CODED PARTS.TITANIUM NOT RECOMMENDED FOR USE IN OXYGEN SYSTEMS.PARTS ARE NOT TO BE MANUFACTURED FROM TYPE 347 CRES AFTER 31 JULY 1990. HOWEVER, TYPE 347CODE “S” MATERIAL MAY BE USED UNTIL EXISTING STOCKS ARE DEPLETED.IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS STANDARD AND THE REFERENCES CITEDHEREIN, THE TEXT OF THIS STANDARD SHALL TAKE PRECEDENCE.REFERENCED GOVERNMENT (OR NON-GOVERNMENT) DOCUMENTS OF THE ISSUE LISTED IN THAT ISSUEOF THE DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS (DoDISS) SPECIFIED INTHE SOLICITATION FORM A PART OF THIS STANDARD TO THE EXTENT SPECIFIED HEREIN.