DIN EN 13242-2008
土木工程和道路建筑用非结合和液压结合材料用集料(包括修改件A1-2007).英文版本DIN EN 13242-2008-03

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction(includes Amendment A1:2007); English version of DIN EN 13242:2008-03

DIN EN 13242-2008 发布历史

This European Standard specifies the properties of aggregates obtained by processing natural or manufactured or recycled materials for hydraulically bound and unbound materials for civil engineering work and road construction. It provides for the evaluation of conformity of the products to this European Standard. NOTE 1 Aggregates used in construction should comply with all the requirements of this European Standard. As well as familiar and traditional natural and manufactured aggregates Mandate M/125 "Aggregates" included recycled aggregates and some materials from new or unfamiliar sources. Recycled aggregates are included in the standards and new test methods for them are at an advanced stage of preparation. For unfamiliar materials from secondary sources, however, the work on standardisation has only started recently and more time is needed to define clearly the origins and characteristics of these materials. In the meantime such unfamiliar materials when placed on the market as aggregates must comply fully with this standard and national regulations for dangerous substances (see Annex ZA of the standard) depending upon their intended use. Additional characteristics and requirements may be specified on a case by case basis depending upon experience of use of the product, and defined in specific contractual documents. NOTE 2 Properties for lightweight aggregates are specified in EN 13055-2.

DIN EN 13242-2008由德国标准化学会 DE-DIN 发布于 2008-03。

DIN EN 13242-2008 在中国标准分类中归属于: Q13 混凝土、集料、灰浆、砂浆，在国际标准分类中归属于: 91.100.15 矿物材料和产品。

DIN EN 13242-2008 发布之时，引用了标准

• EN 196-2 测试水泥的方法.第2部分:水泥的化学分析*， 2013-06-01 更新
• EN 932-3 岩石粒化一般性能的试验方法.第3部分:试验程序和简化岩相说明术语.包含修改件 A1-2003
• EN 932-5 测试的一般属性聚合-第5部分:常见设备和校准*， 2012-02-01 更新
• EN 933-1 骨料的几何属性的测试.第1部分:粒度分布测定,筛选方法*， 2012-01-01 更新
• EN 933-3 集料几何特性的试验.第3部分:颗粒形状的测定.片状指数*， 2012-01-01 更新
• EN 933-4 集料几何特性试验.第4部分:颗粒形状的测定.形状指数
• EN 933-5 集料的几何性能试验.第5部分:粗糙粒子集合中表面碎裂百分率测定;包含修改件A1-2004
• EN 933-8 骨料的几何属性的测试.第8部分:评估罚款-砂当量测试*， 2012-01-01 更新
• EN 1097-1 集料机械和物理性能试验.第1部分:耐磨性的测定*， 2011-01-01 更新
• EN 1097-2-1998 原岩颗粒的机械和物理性能的检验方法.第2部分:测定防碎裂性能的方法.包含修改件A1-2006年7月
• EN 1097-6-2000 集料的机械和物理性能试验.第6部分:颗粒密度和吸水率测定.合并勘误表.2002年12月;包含修改件A1-2005
• EN 1367-1 集料热性能和老化性能试验.第1部分:耐冻性和耐融性的测定
• EN 1367-2 岩石颗粒热性能和风化性能试验.第2部分:硫酸镁法*， 2022-07-18 更新
• EN 1367-3 集料的热性能和抗风化性能的试验.第3部分:煮沸试验.合并勘误表2004年5月
• EN 1744-1 岩石颗粒化学性能试验方法.第1部分:化学分析*， 2022-07-18 更新
• EN 1744-3 集料化学性能的试验.第3部分:采用沥滤法对洗出液的制备
• ISO 565 试验筛 金属丝编织网、金属穿孔板和电成型薄板 筛孔的公称网孔尺寸

* 在 DIN EN 13242-2008 发布之后有更新，请注意新发布标准的变化。

DIN EN 13242-2008的历代版本如下：

• 2008年03月 DIN EN 13242-2008 土木工程和道路建筑用非结合和液压结合材料用集料(包括修改件A1-2007).英文版本DIN EN 13242-2008-03
• 2013年08月01日 DIN EN 13242-2013 土木工程和道路建筑用非结合和液压结合材料用集料.德文版本DIN EN 13242-2013

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13242-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13242-2008

发布日期

2008年03月

实施日期

废止日期

无

中国标准分类号

Q13

国际标准分类号

91.100.15

发布单位

DE-DIN

引用标准

EN 196-2 EN 932-3 EN 932-5 EN 933-1 EN 933-3 EN 933-4 EN 933-5 EN 933-8 prEN 933-11 EN 1097-1 EN 1097-2-1998 EN 1097-6-2000 EN 1367-1 EN 1367-2 EN 1367-3 EN 1744-1 EN 1744-3 ISO 565

代替标准

DIN EN 13242-2013

被代替标准

DIN EN 13242-2003 DIN EN 13242 Berichtigung 1-2004 DIN EN 13242/A1-2006

适用范围

This European Standard specifies the properties of aggregates obtained by processing natural or manufactured or recycled materials for hydraulically bound and unbound materials for civil engineering work and road construction. It provides for the evaluation of conformity of the products to this European Standard. NOTE 1 Aggregates used in construction should comply with all the requirements of this European Standard. As well as familiar and traditional natural and manufactured aggregates Mandate M/125 "Aggregates" included recycled aggregates and some materials from new or unfamiliar sources. Recycled aggregates are included in the standards and new test methods for them are at an advanced stage of preparation. For unfamiliar materials from secondary sources, however, the work on standardisation has only started recently and more time is needed to define clearly the origins and characteristics of these materials. In the meantime such unfamiliar materials when placed on the market as aggregates must comply fully with this standard and national regulations for dangerous substances (see Annex ZA of the standard) depending upon their intended use. Additional characteristics and requirements may be specified on a case by case basis depending upon experience of use of the product, and defined in specific contractual documents. NOTE 2 Properties for lightweight aggregates are specified in EN 13055-2.

谁引用了DIN EN 13242-2008 更多引用