CENELEC EN 61058-1-2002

Switches for appliances Part 1: General requirements (IEC 61058-1:2000)

CENELEC EN 61058-1-2002 发布历史

1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A.These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard, the word "appliance" means "appliance or equipment". 1.2 This standard applies to switches intended to be incorporated in, on or with an appliance. 1.3 This standard also applies to switches incorporating electronic devices. 1.4This standard also applies to switches # for appliances such as – switches intended to be connected to a flexible cable (cord switches) for which, however, particular requirements are given in IEC 61058-2-1; NOTE In this document, the word "cable" means "cable or cord". – switches integrated in an appliance (integrated switches); – switches intended to be mounted separately from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1, for which, however, particular requirements are given in IEC 61058-2-4; – change-over selectors for which, however, particular requirements are given in IEC 61058-2-5. 1.5 This standard does not contain requirements for isolating switches. 1.6 This standard does not apply to devices which control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730.

CENELEC EN 61058-1-2002由欧洲标准化委员会 IX-CEN 发布于 2008-01。

CENELEC EN 61058-1-2002在国际标准分类中归属于: 29.120.40 开关。

CENELEC EN 61058-1-2002的历代版本如下：

• 2008年01月 CENELEC EN 61058-1-2002

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 CENELEC EN 61058-1-2002 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

CENELEC EN 61058-1-2002

发布日期

2008年01月

实施日期

废止日期

无

国际标准分类号

29.120.40

发布单位

IX-CEN

适用范围

1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A.These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard, the word "appliance" means "appliance or equipment". 1.2 This standard applies to switches intended to be incorporated in, on or with an appliance. 1.3 This standard also applies to switches incorporating electronic devices. 1.4This standard also applies to switches # for appliances such as – switches intended to be connected to a flexible cable (cord switches) for which, however, particular requirements are given in IEC 61058-2-1; NOTE In this document, the word "cable" means "cable or cord". – switches integrated in an appliance (integrated switches); – switches intended to be mounted separately from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1, for which, however, particular requirements are given in IEC 61058-2-4; – change-over selectors for which, however, particular requirements are given in IEC 61058-2-5. 1.5 This standard does not contain requirements for isolating switches. 1.6 This standard does not apply to devices which control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730.