ISO/TR 230-8-2010
机床试验规则.第8部分:振动

Test code for machine tools - Part 8: Vibrations

ISO/TR 230-8-2010 发布历史

This part of ISO 230 is concerned with the different types of vibration that can occur between the tool-holding part and the workpiece-holding part of a machine tool. (For simplicity, these will generally be referred to as “tool” and “workpiece”, respectively.) These are vibrations that can adversely influence the production of both an acceptable surface finish and an accurate workpiece. This part of ISO 230 is not aimed primarily at those who have expertise in vibration analysis and who routinely carry out such work in research and development environments. It does not, therefore, replace standard textbooks on the subject (see the Bibliography). It is, however, intended for manufacturers and users alike with general engineering knowledge in order to enhance their understanding of the causes of vibration by providing an overview of the relevant background theory.

ISO/TR 230-8-2010由国际标准化组织 IX-ISO 发布于 2010-06。

ISO/TR 230-8-2010 在中国标准分类中归属于: J50 机床综合，在国际标准分类中归属于: 25.080.01 机床综合。

ISO/TR 230-8-2010 发布之时，引用了标准

• ISO 230-1 机床试验规范. 第1部分: 在空载或精加工条件下机床运行的几何精度*， 2012-03-01 更新
• ISO 230-5 机床检验通则 第5部分:噪声发射的测定
• ISO 1925-2001 机械振动 平衡 词汇 两种语言版
• ISO 1940-1-2003 机械振动.在恒定(刚性)状态下转子的平衡质量要求.第1部分:平衡公差的规范和检定
• ISO 2041-2009 机械振动,冲击和状态监测.词汇
• ISO 2631-1 机械振动和冲击.人体全身振动暴露的评估.第1部分:一般要求.修改件1*， 2010-07-01 更新
• ISO 2954 旋转式和往复式机器的机械振动 对测量振动烈度仪器的要求*， 2012-04-01 更新
• ISO 5348-1998 机械振动与冲击 加速计的机械安装
• ISO 6103 粘合磨料产品.砂轮交货时的可允许不平衡性.静态试验*， 2014-10-01 更新
• ISO 15641 高速机械加工用铣刀 安全要求

* 在 ISO/TR 230-8-2010 发布之后有更新，请注意新发布标准的变化。

ISO/TR 230-8-2010的历代版本如下：

• 2009年01月 ISO/TR 230-8-2009 机床试验规则.第8部分:振动等级的测定
• 2010年06月 ISO/TR 230-8-2010 机床试验规则.第8部分:振动

ISO/TR 230-8-2010 机床试验规则.第8部分:振动 由 ISO/TR 230-8-2009 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ISO/TR 230-8-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ISO/TR 230-8-2010

发布日期

2010年06月

实施日期

废止日期

无

中国标准分类号

J50

国际标准分类号

25.080.01

发布单位

IX-ISO

适用范围

This part of ISO 230 is concerned with the different types of vibration that can occur between the tool-holding part and the workpiece-holding part of a machine tool. (For simplicity, these will generally be referred to as “tool” and “workpiece”, respectively.) These are vibrations that can adversely influence the production of both an acceptable surface finish and an accurate workpiece. This part of ISO 230 is not aimed primarily at those who have expertise in vibration analysis and who routinely carry out such work in research and development environments. It does not, therefore, replace standard textbooks on the subject (see the Bibliography). It is, however, intended for manufacturers and users alike with general engineering knowledge in order to enhance their understanding of the causes of vibration by providing an overview of the relevant background theory.

ISO/TR 230-8-2010系列标准

谁引用了ISO/TR 230-8-2010 更多引用