非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 ASTM E1457-13 前三页,或者稍后再访问。
您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。
点击下载后,生成下载文件时间比较长,请耐心等待......
6.1 Creep crack growth rate expressed as a function of the steady state C* or K characterizes the resistance of a material to crack growth under conditions of extensive creep deformation or under brittle creep conditions. Background information on the rationale for employing the fracture mechanics approach in the analyses of creep crack growth data is given in (8, 10, 27-32).
6.2 Aggressive environments at high temperatures can significantly affect the creep crack growth behavior. Attention must be given to the proper selection and control of temperature and environment in research studies and in generation of design data.
6.2.1 Expressing CCI time, t0.2 and CCG rate, da/dt as a function of an appropriate fracture mechanics related parameter generally provides results that are independent of specimen size and planar geometry for the same stress state at the crack tip for the range of geometries and sizes presented in this document (see Annex A1). Thus, the appropriate correlation will enable exchange and comparison of data obtained from a variety of specimen configurations and loading conditions. Moreover, this feature enables creep crack growth data to be utilized in the design and evaluation of engineering structures operated at elevated temperatures where creep deformation is a concern. The concept of similitude is assumed, implying that cracks of differing sizes subjected to the same nominal C*(t), Ct, or K will advance by equal increments of crack extension per unit time, provided the conditions for the validity for the specific crack growth rate relating parameter are met. See 11.7 for details.
6.2.2 The effects of crack tip constraint arising from variations in specimen size, geometry and material ductility can influence t0.2 and da/dt. For example, crack growth rates at the same value of C*(t), Ct in creep-ductile materials generally increases with increasing thickness. It is therefore necessary to keep the component dimensions in mind when selecting specimen thickness, geometry and size for laboratory testi......
(Chevron-Notch) Fracture Toughness of Metallic Materials E1457-00 测量金属蠕变开裂增长速度的试验方法 Standard Test Method for Measurement of Creep Crack Growth Rates in MetalsE1681-03 恒定载荷下金属材料环境促使裂纹的阈应力强度系数测定标准试验方法...
(这种试验夹具同时适用于测试弯拉强度)疲劳开裂寿命:图17 无机结合料稳定层材料四点疲劳弯曲试验夹具4.3 沥青混合料层永久变形量验算国内外关于沥青混合料层永久变形评价试验的方法很多,例如马歇尔试验方法,恒高度重复剪切试验(RSST-CH),静态蠕变试验(流值时间),动态蠕变试验(流值次数),三轴试验,以及全球各种不同标准的车辙试验方法等。...
全缺口蠕变试验机(FNCT)符合标准 GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验 GB/T11546 塑料 蠕变性能的测定 ISO 16770 塑料 聚乙烯环境应力断裂(ESC)的测定 全切口蠕变试验(FNCT) ISO 899 塑料 拉伸蠕变的测定 第1部分:拉伸蠕变 标准信息 ISO 3501 GB/T 32682-2016GB/T32682...
沥青面层低温开裂指数:St为在路面低温设计温度加10℃试验温度条件下,表面层沥青弯曲梁流变试验加载180秒时的蠕变劲度(MPa),因此为了进行沥青面层的低温开裂指数验算,我们必须要增加低温弯曲梁流变试验,依据标准JTG E20-T0627。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号