DIN 20066:2017
液压流体动力.软管总成.尺寸规格,要求

Hydraulic fluid power - Hose assemblies - Dimensions, requirements

作废

DIN 20066:2017 发布历史

This standard is intended to be used for rubber and plastic hose assemblies of the types: 1ST, 1SN, 2ST and 2SN according to DIN EN 853, 1TE, 2TE and 3TE according to DIN EN 854, 4SP, 4SH, R13 according to DIN EN 856, R15 according to ISO 3862 and 1SC and 2SC according to DIN EN 857 as well as plastic hoses assemblies of the types R7, R8 and R18 according to ISO 3949, appropriate for temperatures of -40° C up to + 100° C (hose types R13 and R 15 to 120°C) and hose connectors of the light and heavy duty series according to DIN ISO 12151-2 and DIN ISO 12151-3. This standard contains information about the most important criteria for selection and reference of hoses and connectors, the installation and connection dimensions as well as the requirements for the installation of hose assemblies. The comparative presentation of respective hoses types in Table 1 and Table 2 gives designers guidelines for the selection of hoses (nominal diameter and design) and their appropriate connectors, in case the piping of a system has already been determined. Further, guidelines are given in this standard for storage, life cycle and necessary inspections to ensure the full functionality of those assemblies.

DIN 20066:2017由德国标准化学会 DE-DIN 发布于 2017-11-01。

DIN 20066:2017 在中国标准分类中归属于: P94 金属设备与工艺管道安装工程，在国际标准分类中归属于: 23.100.40 管道和管接头。

DIN 20066:2017 发布之时，引用了标准

• DIN 7716:1982 橡胶制品.贮存、清洁和保管要求
• DIN EN 853:2016 橡胶软管和软管组件.带金属丝编织层的液压软管.规范.德文版本EN 853-2015
• DIN EN 854:2016 橡胶软管和软管组件.带织物编织层的液压软管.规范.德文版本EN 854-2015
• DIN EN 856:2016 橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范.德文版本EN 856-2015
• DIN EN 857:2016 橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范.德文版本EN 857-2015
• DIN EN ISO 3949:2014 塑料软管和软管组合件. 液压用织物增强型. 规格 (ISO 3949-2009); 德文版本EN ISO 3949-2014
• DIN EN ISO 4413:2011 液压传动.系统及其部件的一般规则和安全要求(ISO 4413-2010);德文版本EN ISO 4413-2010
• DIN EN ISO 8331:2017 橡胶和塑料软管及软管组件. 选择,储存,使用和维修指南(ISO 8331-2016);德文版本EN ISO 8331-2016
• DIN EN ISO 8434-1:2008 液压传动和通用金属管连接件.第1部分:24度锥形接头(ISO 8434-1-2007).德文版本EN ISO 8434-1-2007
• DIN ISO 10763:2004 液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力
• DIN ISO 12151-2:2004 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头
• DIN ISO 12151-3:2012 液压传动和通用连接件.软管接头.第3部分:带ISO 6162标准法兰末端的软管接头(ISO 12151-3-2010)
• ISO 3862:2017 橡胶软管和软管组件.油基或水基流体用橡胶包皮螺旋钢丝增强液压型.规范
• ISO 5598:2008 流体传动系统和元件.词汇
• ISO 6162-1:2012 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:3.5 MPa至35 MPa(35 bar至350 bar)压力下使用的DN 13至127的凸缘连接器
• ISO 6162-2:2012 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35 MPa至40 MPa(350 bar至400 bar)、DN 13至DN 51时使用的凸缘连接器

DIN 20066:2017的历代版本如下：

• 2021年 DIN 20066:2021
• 2018年 DIN 20066:2018-03 液压流体动力.软管总成.尺寸规格,要求
• 2017年 DIN 20066:2017 液压流体动力.软管总成.尺寸规格,要求
• 2012年 DIN 20066:2012 液压流体动力.软管总成.尺寸规格,要求
• 2002年 DIN 20066:2002 流体动力系统.软管组件.尺寸、要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN 20066:2017 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN 20066:2017

发布

2017年

发布单位

德国标准化学会

替代标准

DIN 20066:2018-03

当前最新

DIN 20066:2018-03

DIN 20066:2019

 

 

引用标准

DIN 7716:1982 DIN EN 853:2016 DIN EN 854:2016 DIN EN 856:2016 DIN EN 857:2016 DIN EN ISO 3949:2014 DIN EN ISO 4413:2011 DIN EN ISO 8331:2017 DIN EN ISO 8434-1:2008 DIN ISO 10763:2004 DIN ISO 12151-2:2004 DIN ISO 12151-3:2012 ISO 3862:2017 ISO 5598:2008 ISO 6162-1:2012 ISO 6162-2:2012

被代替标准

DIN 20066:2012 DIN 20066:2016

适用范围

This standard is intended to be used for rubber and plastic hose assemblies of the types: 1ST, 1SN, 2ST and 2SN according to DIN EN 853, 1TE, 2TE and 3TE according to DIN EN 854, 4SP, 4SH, R13 according to DIN EN 856, R15 according to ISO 3862 and 1SC and 2SC according to DIN EN 857 as well as plastic hoses assemblies of the types R7, R8 and R18 according to ISO 3949, appropriate for temperatures of -40° C up to + 100° C (hose types R13 and R 15 to 120°C) and hose connectors of the light and heavy duty series according to DIN ISO 12151-2 and DIN ISO 12151-3. This standard contains information about the most important criteria for selection and reference of hoses and connectors, the installation and connection dimensions as well as the requirements for the installation of hose assemblies. The comparative presentation of respective hoses types in Table 1 and Table 2 gives designers guidelines for the selection of hoses (nominal diameter and design) and their appropriate connectors, in case the piping of a system has already been determined. Further, guidelines are given in this standard for storage, life cycle and necessary inspections to ensure the full functionality of those assemblies.

DIN 20066:2017相似标准

推荐