ZH
RU
ES

very slippery surface

very slippery surface, Total:500 items.

In the international standard classification, very slippery surface involves: Bearings, Leather technology, Footwear, Occupational safety. Industrial hygiene, Protection of and in buildings, Non-textile floor coverings, Sports equipment and facilities, Elements of buildings, Construction materials, Protective equipment, Road vehicles in general, Nuclear energy engineering, Linear and angular measurements, Road engineering, Tyres, Testing of metals, Construction of airports, Products of the textile industry, Components for aerospace construction, Water quality, Products of the chemical industry, Structure and structure elements, Lubricants, industrial oils and related products, Mechanical testing, Plastics, Machine tools, Valves, Gears, Paper and board, Road vehicle systems, Construction industry, Aerospace fluid systems and components, Equipment for entertainment, Air quality, Protection against fire, Electrical accessories.

US-FCR, very slippery surface

FCR FED FCGS 07512-1986 SMOOTH SURFACED BITUMINOUS BUILT-UP ROOFING
FCR AF ETL 98-1-1998 DESIGN CRITERIA FOR AGGREGATE SURFACED HELICOPTER SLIDE AREAS AND HELIPORTS

Society of Automotive Engineers (SAE), very slippery surface

SAE AS81819/1-2002 Bearings, plain, sliding spherical, self-lubricating, self- aligning, high speed oscillation
SAE ARP5448/8-2001 Plain Spherical Bearing Radial and Axial Clearance Measurement
SAE AS15720A-2005 Fitting, Lubrication, Hydraulic, Throat or Surface Check, .250-28 Taper Threads, Corrosion Resistant Steel, Type VII
SAE AS15005B-2007 Fitting, Lubrication, Hydraulic, Throat or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy, Type V
SAE AS81935/7-2006 BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F
SAE AS81935/6-2006 BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F

SE-SIS, very slippery surface

SIS 24 01 11-1962 Determination of smoothness of table tops
SIS 65 00 37-1960 Method for the determination of seam slippage in fabrics
SIS SS 85 91 20-1983 Cross-country ski boots with three pin holes -Dimensions, interface and design

ZA-SANS, very slippery surface

CKS 471-1976 Side upper leather (with a smooth corrected grain)

CZ-CSN, very slippery surface

CSN 65 6332-1993 Apparent viscosity of lubricating greases
CSN ON 27 7039-1968
CSN 35 3150-1979 Starters with faceplate and drum-type controller for slip-ring A. C. motors and D. C. motors.

VE-FONDONORMA, very slippery surface

NORVEN 24-2-1962

UY-UNIT, very slippery surface

UNIT 130-1958

Standard Association of Australia （SAA）, very slippery surface

AS/NZS 3661.1:1993 Slip resistance of pedestrian surfaces - Requirements
AS 4663:2013
AS 4586:2013
AS/NZS 18527.1:2022 Eye and face protection for sports use, Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021, MOD)

TR-TSE, very slippery surface

TS 2125-1975 DETERMINATION OF APPARENT VISCOSITY ?N LUBRICATING GREASES

British Standards Institution (BSI), very slippery surface

BS EN 14837:2006 Surfaces for sports areas - Determination of slip resistance
BS EN IEC 62138:2019 Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category B or C functions
BS 7941-2:2000 Methods for measuring the skid resistance of pavement surfaces - Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device
BS PD CEN/TS 15901-15:2014 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG
BS EN 16165:2021 Determination of slip resistance of pedestrian surfaces. Methods of evaluation
BS EN ISO 18527-1:2022 Eye and face protection for sports use - Requirements for downhill skiing and snowboarding goggles
BS ISO 3547-1:2018 Tracked Changes. Plain bearings. Wrapped bushes. Dimensions
DD CEN/TS 15901-7:2009 Road and airfield surface characteristics - Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG). The GripTester®
20/30400098 DC BS EN 16165. Determination of slip resistance of pedestrian surfaces. Methods of evaluation
BS ISO 10792-2:1996 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Inch series
BS ISO 10792-1:1996 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Metric series
BS ISO 10792-3:1996 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Technical specification
BS EN 13036-4:2003 Road and airfield surface characteristics - Test methods - Method for measurement of slip/skid resistance of a surface - The pendulum test
BS 7941-1:1999 Methods for measuring the skid resistance of pavement surfaces - Side-way force coefficient routine investigation machine
BS PD CEN/TS 15901-14:2016 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
BS ISO 7768:2009 Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
18/30334548 DC BS EN ISO 18527-1. Eye and face protection for sports use. Part 1. Requirements for downhill skiing and snow-boarding goggles
BS ISO 8791-4:2008 Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS ISO 7770:2009 Textiles - Test method for assessing the smoothness appearance of seams in fabrics after cleansing
DD CEN/TS 15901-6:2009 Road and airfield surface characteristics - Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM®
BS 7941-1:2006 Methods for measuring the skid resistance of pavement surfaces - Part 1: Sideway-force coefficient routine investigation machine
BS EN 2336:2005 Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads
BS EN 6096:2019 Aerospace series. Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
15/30331399 DC BS EN 6096. Aerospace series. Bearings spherical plain with self-lubricating liner extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
BS EN 2022:1990 Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
BS EN 2501:1992 Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
BS ISO 7862:2004 Road vehicles. Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions

Underwriters Laboratories (UL), very slippery surface

UL 410-2006 UL Standard for Safety Slip Resistance of Floor Surface Materials Third Edition
UL 410 BULLETIN-2003 UL Standard for Safety Slip Resistance of Floor Surface Materials
UL 410-1996 UL Standard for Safety Slip Resistance of Floor Surface Materials (Second Edition)

Japanese Industrial Standards Committee (JISC), very slippery surface

JIS A 6910:1993 Multi-layer wall coatings for glossy textured finishes

Association Francaise de Normalisation, very slippery surface

NF ISO 23223:2021 Chaussures de ski pour skis alpins dotées de semelles de marche améliorées - Zone de contact avec les fixations de ski alpin - Exigences et méthodes d'essai
NF P98-220-1:1993 Tests relating to pavements. Anti-slip measurements. Part 1: Ground measurements using low-speed anti-skid devices
NF P98-220-3:1995 Test relating to pavements. Tests relating to pavements measurement of skid resistance. Part 3 : method for measuring the transverse skid factor (transversal resistance).
NF S52-715:1988 ALPINE SKIS. SKI BINDINGS FOR ADULTS. LATERAL TOE RELEASE UNDER IMPACT LOADING. SAFETY REQUIREMENT AND TEST METHOD.
NF P05-010*NF EN 16165:2021 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
NF P98-219-4:1996 Test relating to pavement. Eveness test. Part 4 : continuous static measurement of a profile.
NF EN 16165:2021 Détermination de la résistance à la glissance des surfaces piétonnières - Méthodes d'évaluation
XP P98-832-3*XP CEN/TS 15901-3:2011 Road and airfield surface characteristics - Part 3 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA) : ADHERA
XP P98-832-7*XP CEN/TS 15901-7:2011 Road and airfield surface characteristics - Part 7 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG) : the GripTester
XP P98-832-1*XP CEN/TS 15901-1:2011 Road and airfield surface characteristics - Part 1 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR
NF EN ISO 18527-1:2022 Protection des yeux et du visage à usage sportif - Partie 1 : Exigences relatives aux lunettes de ski alpin et de surf des neiges
NF P98-220-4:1996 Tests relating to pavements. Skid test. Part 4 : method for measuring the transverse skid factor with a scrim device.
NF EN 12503-6:2001 Tapis de sport - Partie 6 : détermination des caractéristiques antidérapantes de la face supérieure
XP P98-832-9*XP CEN/TS 15901-9:2011 Road and airfield surface characteristics - Part 9 : procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD) : DWWNL skid resistance trailer
XP ISO/TS 24137:2023 Paliers lisses - Modification de la surface par fixation par pression de lubrifiants solides combinée à un traitement par micro-cavités
XP P98-832-4*XP CEN/TS 15901-4:2011 Road and airfield surface characteristics - Part 4 : procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT) : Tatra Runway Tester (TRT)
NF T51-110:1975 Wear test by means of friction with plane to plane contact (friction by means of alternating linear sliding).
NF ISO 4703:2001 Conditions d'essai des machines à rectifier les surfaces planes à deux montants - Machines à rectifier les glissières - Contrôle de la précision
NF EN 16837:2018 Sols sportifs - Détermination de la glissance linéaire entre la chaussure et la surface du sol
NF S52-751*NF ISO 22264:2006 Telemark ski-boots for adults - Interface with Telemark ski-bindings - Requirements and test methods
XP P98-832-12*XP CEN/TS 15901-12:2011 Road and airfield surface characteristics - Part 12 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip : the BV 11 and Saab friction tester (SFT)
XP P98-832-2*XP CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL) : ROAR (Road Analyser and Recorder of Norsemeter)
NF P31-202-1/A1:2001 Building works- Roof covering made of slipping or grooved clay tiles- Part 1: Technical specifications
XP P98-832-5*XP CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK) : ROAR (Road Analyser and Recorder of Norsemeter)
NF L31-559*NF EN 2755:2021 Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
NF ISO 21107:2016 Roulements et rotules lisses - Structure de recherche pour supports électroniques - Caractéristiques et critères de performance identifiés par un vocabulaire des propriétés
XP P98-831-2*XP CEN/TS 13036-2:2012 Road and airfield surface characteristics - Test methods - Part 2 : assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
L31-513:1988 Aerospace series. Spherical plain bearings of 100C6 bearing steel. Dimensions and loads.
NF L31-525*NF EN 4614:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
NF L31-524*NF EN 4613:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
NF P98-831-4*NF EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4 : method for measurement of slip/skid resistance of a surface : the pendulum test
NF EN ISO 10256-3:2018 Équipements de protection destinés à être utilisés en hockey sur glace - Partie 3 : protections faciales pour les skateurs
NF L31-526*NF EN 6096:2019 Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
NF T51-107:1977 Plastics. Linear contact. Wear and friction test (sliding of a cylinder over a plane).
NF H44-018:1988 Aerosol dispensers. Containers with a 25,4 mm opening. Measurement of the neck parallelism and surface eveness.
XP P98-832-6*XP CEN/TS 15901-6:2011 Road and airfield surface characteristics - Part 6 : procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS) : SCRIM
XP P98-832-8*XP CEN/TS 15901-8:2011 Road and airfield surface characteristics - Part 8 : procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD) : SKM
XP P98-832-11*XP CEN/TS 15901-11:2011 Road and airfield surface characteristics - Part 11 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR) : the SRM
XP P98-832-10*XP CEN/TS 15901-10:2011 Road and airfield surface characteristics - Part 10 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK) : the Skiddometer BV-8
XP P98-832-13*XP CEN/TS 15901-13:2011 Road and airfield surface characteristics - Part 13 : procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO) : the Odoliograph
NF EN ISO 25178-603:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 603 : caractéristiques nominales des instruments sans contact (microscopes interférométriques à glissement de franges)
NF L31-611-2*NF EN 4539-2:2019 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2 : inch series
NF C68-107:1990 Conduits and fittings for electrical installations. Circular cross-section, insulationg, plain, rigid, non-threadable, non-flame propagating conduits. Type iro.
XP CEN/TS 15901-10:2011 Caractéristiques de surface des routes et aéroports - Partie 10 : mode opératoire de détermination de l'adhérence d'un revêtement de chaussée à l'aide d'un dispositif à mesurage longitudinal, roue bloquée (CFLSK) : le skiddomètre BV-8
NF S54-201-3*NF EN 1176-3:2017 Playground equipment and surfacing - Part 3 : additional specific safety requirements and test methods for slides

GOSTR, very slippery surface

GOST R IEC 60880-2010 Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systemsperforming category A functions
GOST R IEC 62138-2010 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
GOST 34342-2017 Motor vehicles. Pneumatic winter tyres, fitted with antiskid studs. Test methods for determination of the value of test pavement wear

HU-MSZT, very slippery surface

US-American Society of Safety Engineers, very slippery surface

ASSE A1264.2-2006 Provision of Slip Resistance on Walking / Working Surfaces
ASSE TR A1264.3-2007 Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces

Danish Standards Foundation, very slippery surface

DS/EN 14837:2006 Surfaces for sports areas - Determination of slip resistance
DS/CEN/TS 16165:2012 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
DS/EN 16165:2021 Determination of slip resistance of pedestrian surfaces – Methods of evaluation
DS/EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
DS/CEN/TS 15901-3:2011 Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA
DS/CEN/TS 15901-1:2011 Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR
DS/CEN/TS 15901-7:2011 Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester®
DS/CEN/TS 15901-9:2011 Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer
DS/CEN/TS 15901-12:2011 Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT)
DS/CEN/TS 15901-4:2011 Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT)
DS/EN 2022:1991 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
DS/EN 2023:1991 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
DS/EN 2501:1991 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
DS/CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)
DS/CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)
DS/EN 2755:2009 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
DS/CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
DS/EN 4613:2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
DS/EN 4614:2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
DS/EN 4614:2021 Aerospace series – Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series – Dimensions and loads – Inch series
DS/EN 4613:2021 Aerospace series – Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series – Dimensions and loads – Inch series
DS/EN 4540:2012 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification
DS/EN 2584:2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
DS/EN 2585:2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
DS/EN 3048:2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
DS/EN 4040:2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
DS/EN 2336:2006 Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads
DS/CEN/TS 15901-11:2011 Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM
DS/CEN/TS 15901-8:2011 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM
DS/CEN/TS 15901-6:2011 Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM®
DS/EN 2335:2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
DS/EN 2588:2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
DS/CEN/TS 15901-10:2011 Road and airfield surface characteristics - Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): The Skiddometer BV-8
DS/CEN/TS 15901-13:2011 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph
DS/EN 1176-3/Ret. 1:2011 Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides
DS/EN 1176-3:2009 Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides

Lithuanian Standards Office , very slippery surface

LST EN 14837-2006 Surfaces for sports areas - Determination of slip resistance
LST EN 13036-4-2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
LST EN 2064-2001 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Technical specification
LST EN 2023+AC1-2001 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
LST EN 2022+AC1-2001 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
LST EN 2501-2001 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
LST EN 2501-2001/AC1-2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
LST EN 2755-2009 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
LST EN 4614-2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
LST EN 4613-2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
LST EN 4540-2012 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification
LST EN 3048-2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
LST EN 2585-2003 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
LST EN 2584-2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
LST EN 4040-2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
LST EN 2336-2006 Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads
LST EN 2335-2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
LST EN 2588-2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
LST CEN/TS 15901-13-2011 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph
LST EN 1176-3-2008 Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides

AENOR, very slippery surface

UNE-EN 14837:2006 Surfaces for sports areas - Determination of slip resistance
UNE-EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
UNE-CEN/TS 15901-7:2010 IN Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester(r)
UNE 41201:2010 IN Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM(r)
UNE 15317:2004 Surface grinding machines with two columns. Machines for grinding slideways. Test conditions. Testing of the accuracy.
UNE-EN 2064:1993 AEROSPACE SERIES. BEARINGS SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER. THECNICAL SPECIFICATIONS.
UNE-EN 2022:1992 AEROSPACE SERIES. BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. LIGHT SERIES. DIMENSIONS AND LOADS.
UNE-EN 2501:1992 AEROSPACE SERIES. BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER AND WIDE INNER RING. DIMENSIONS AND LOADS.
UNE-EN 2023:1992 AEROSPACE SERIES. BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. NORMAL SERIES. DIMENSIONES AND LOADS.
UNE 18172-2:1984 SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE. BOUNDARY DIMENSIONS. DIMENSION SERIES EW, BEARINGS WITH EXTENDED INNER RING.

NZ-SNZ, very slippery surface

AS/NZS 4663:2004 Slip Resistance Measurement of Existing Pedestrian Surfaces
AS/NZS 3661.2:1994 Slip Resistance of Pedestrian Surfaces Part 2: Guide to the Reduction of Slip Hazards
AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)

American Society for Testing and Materials (ASTM), very slippery surface

ASTM D224-75 Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt)
ASTM D224-89(1996) Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt)
ASTM F659-98 Standard Specification for Skier Goggles and Faceshields
ASTM F659-98e1 Standard Specification for Skier Goggles and Faceshields
ASTM F659-06 Standard Specification for Skier Goggles and Faceshields
ASTM E524-08(2015) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM F2480-06(2012) Standard Guide for In-ground Concrete Skatepark
ASTM E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E430-97 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry
ASTM E2340/E2340M-11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E501-76 Standard Specification for Standard Tire For Pavement Skid-Resistance Tests
ASTM F2480-06 Standard Guide for In-ground Concrete Skatepark
ASTM E501-94(2000) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM E274-97 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM G164-99(2009) Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM E274-65 Tentative Method Of Test For Skid Resistance Of Pavements Using A Two-Wheel Trailer
ASTM E501-06 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM E501-08(2015) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM G133-22 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-05(2016) Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM E1551-06 Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
ASTM E1551-16 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
ASTM G164-99(2004) Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G133-95(2002)e1 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-95 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-02 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-05 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM E274/E274M-11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM G164-99e1 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G133-05e1 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-05(2010) Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G164-99(2013) Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G164-99(2018) Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM E3304-22 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Walking Speed Continuous Friction-Measuring Equipment (CFME) Fixed-Slip Technique
ASTM E274-79 Standard Test Method for Skid Resistance Of Paved Surfaces Using A Full-Scale Tire
ASTM E274-06 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E274/E274M-15(2020) Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E2340-06 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM D2878-10 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D2878-10(2016) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM E274/E274M-15 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM D2878-95(2005) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM E1551-08(2015) Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
ASTM D8004-23 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D2835-89(1998) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D2835-89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D2835-89(2007) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D2835-89(2012) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM F1240-01 Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM E1859-97 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E1859-97(2001) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E1859-97(2006) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E503/E503M-88(2000) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E1859/E1859M-11e1 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E503/E503M-88(2004) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM E1859/E1859M-11(2020) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

RO-ASRO, very slippery surface

STAS 11567-1982 Surface grinding machines with two columns SLIDEWAY GRINDING MACHINES Testings of accuracy
STAS 11174/3-1982 ANTIBLISTEU AND LUBHICATIX(i MATERIALS FOR STEEl. POURING Determination of spreading surface of lubricating powders
STAS 8849-1983 Road Works SKID RESISTANCE OF SURFACES ROAD Methods of measurements
SR 183-2-1998 Road works. Cement concrete pavements in slipform. Technical quality requirements

American Gear Manufacturers Association, very slippery surface

AGMA 925-A03-2003 Effect of Lubrication on Gear Surface Distress
AGMA 91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
AGMA 14FTM17-2014 The Impact of Surface Condition and Lubricant on Gear Tooth Friction

American National Standards Institute （ANSI), very slippery surface

ANSI/ASSE A1264.2-2012 Standard for the Provision of Slip Resistance on Walking/Working Surfaces
ANSI/ASTM F659:2010 Specification for Skier Goggles and Faceshields
ANSI/ASTM F2480:2006 Guide for In-ground Concrete Skate Park
ANSI A1264.2-2006 Provision of Slip Resistance on Walking/Working Surfaces
ANSI/ISA 75.08.09-2005 Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)

The American Road & Transportation Builders Association, very slippery surface

AASHTO M 286-1996 Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests
AASHTO M 261-1996 Standard Specification for Standard Tire for Pavement Frictional-Property Tests
AASHTO M 331-2013 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
AASHTO MP 14-2012 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, very slippery surface

GB/T 34478-2017 Determination of anti-slip coefficient at bolted connect steel plates' surfaces

GM North America, very slippery surface

GM GMP.UP.004-1993 Polyester SMC - Low Profile, 27.5% Glass Reinforced (Smooth) (Revision B)
GM GM9615P-1988 Panel Preparation for Weld Compatibility Test for a Sheet Metal Forming Lubricant

IN-BIS, very slippery surface

IS 10731-1983
IS 13804-1993 Inland vessels. Sheaves for dredgers. Dimensions
IS 10888-1984

European Committee for Standardization (CEN), very slippery surface

EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
EN 16165:2021 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
CEN/TS 15901-15:2014 Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG
CEN/TS 15901-3:2009 Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA
PD CEN/TS 15901-15:2014 Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG
CEN/TS 15901-1:2009 Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR
CEN/TS 15901-9:2009 Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer
EN ISO 18527-1:2022 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
CEN/TS 15901-4:2009 Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT)
PD CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
CEN/TS 15901-12:2011 Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT)
CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
CEN/TS 15901-5:2009 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)
CEN/TS 15901-2:2009 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)
EN 13863-4:2012 Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres
EN 13036-4:2003 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test
EN 2584:1992 Aerospace series; bearings, spherical plain in corrosion resisting steel with self lubricating liner; narrow series; elevated loads at ambient temperature; dimensions and loads
EN 2585:1992 Aerospace series; bearings, spherical plain in corrosion resisting steel with self lubricating liner; wide series; elevated loads at ambient temperature; dimensions and loads
CEN/TS 15901-8:2009 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM
CEN/TS 15901-13:2011 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph
CEN/TS 15901-11:2011 Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM
EN 2064:1992 Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification
CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
PD CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
EN 13408:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
EN 2023:1989 Bearings - Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Normal Series Dimensions and Loads
CEN/TS 15901-10:2009 Road and airfield surface characteristics - Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): the Skiddometer BV-8

German Institute for Standardization, very slippery surface

DIN EN 16165:2023 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
DIN EN 16165:2020 Determination of slip resistance of pedestrian surfaces - Methods of evaluation; German and English version prEN 16165:2020
DIN EN 16165:2023-02 Determination of slip resistance of pedestrian surfaces - Methods of evaluation; German version EN 16165:2021
DIN CEN/TS 15901-14:2016-05*DIN SPEC 91218-14:2016-05 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS); German version CEN...
DIN 189:1977-07 Driving components; base plates for pedestal slide bearings; dimensions
DIN EN 13036-4:2011-12 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
DIN EN 2064:1992-07 Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992
DIN CEN/TS 15901-15:2014-12*DIN SPEC 91218-15:2014-12 Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG; German version CEN/TS 15901-15:2014
DIN CEN/TS 15901-3:2010-03*DIN SPEC 1143:2010-03 Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA; German version CEN/TS 15901-3:2009
DIN CEN/TS 15901-1:2010-03*DIN SPEC 1141:2010-03 Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR; German version CEN/TS 15901-1:2009
DIN CEN/TS 15901-7:2010-03*DIN SPEC 1147:2010-03 Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the Grip Tester®; German version CEN/TS 15901-7:2009
DIN EN ISO 18527-1:2018-08 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snow-boarding goggles (ISO/DIS 18527-1:2018); German and English version prEN ISO 18527-1:2018 / Note: Date of issue 2018-06-29
DIN 810:1986-11 Machine tools; presses; slide holes for shanks of press tools; dimensions
DIN EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
DIN SPEC 1141:2010 Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR; German version CEN/TS 15901-1:2009
DIN CEN/TS 15901-9:2010-03*DIN SPEC 1149:2010-03 Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer; German version CEN/TS 15901-9:2009
DIN CEN/TS 15901-4:2010-05*DIN SPEC 1144:2010-05 Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT); German version CEN/TS 15901-4:2009
DIN 51097:1992 Testing of floor coverings; determination of the anti-slip properties; wet-loaded barefoot areas; walking method; ramp test
DIN 31670-8:1986-07 Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
DIN EN ISO 18527-1:2023-11 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021); German version EN ISO 18527-1:2022 / Note: DIN EN 174 (2001-07) remains valid alongside this standard until 2025-05-01.
DIN SPEC 1148:2010 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM; German version CEN/TS 15901-8:2009
DIN SPEC 1146:2010 Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIMę; German version CEN/TS 15901-6:2009
DIN CEN/TS 15901-12:2011-06*DIN SPEC 91218-12:2011-06 Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT); German version CEN/TS 15901-12:2011
DIN EN 4540:2012-03 Aerospace series - Bearings, sperical plain, in corrosion resisting steel with self-lubricating liner, Elevated load under low oscillations - Technical specification; German and English version EN 4540:2011
DIN EN ISO 18527-1:2018 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snow-boarding goggles (ISO/DIS 18527-1:2018); German and English version prEN ISO 18527-1:2018
DIN ISO 10792-2:1996 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995
DIN CEN/TS 15901-2:2010-03*DIN SPEC 1142:2010-03 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15...
DIN CEN/TS 15901-5:2010-03*DIN SPEC 1145:2010-03 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15...
DIN 31670-8:1986 Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
DIN EN 2755:2020 Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification; German and English version FprEN 2755:2020
DIN EN 2755:2022 Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification; German and English version EN 2755:2021
DIN EN 16165:2021 Determination of slip resistance of pedestrian surfaces - Methods of evaluation; German version EN 16165:2021
DIN EN 2755:2022-02 Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification; German and English version EN 2755:2021
DIN ISO 22264:2007 Telemark ski-boots for adults - Interface with Telemark ski-bindings - Requirements and test methods (ISO 22264:2006) English version of DIN ISO 22264:2007-01
DIN ISO 10792-3:1996 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995
DIN SPEC 1142:2010 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15901
DIN SPEC 1143:2010 Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA; German version CEN/TS 15901-3:2009
DIN SPEC 1145:2010 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15901
DIN SPEC 1149:2010 Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer; German version CEN/TS 15901-9:2009
DIN EN 4614:2022 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series; German and English version EN 4614:2021
DIN EN 4613:2020 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series; German and English version FprEN 4613:2020
DIN EN 4613:2022 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series; German and English version EN 4613:2021
DIN EN 4614:2020 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series; German and English version FprEN 4614:2020
DIN SPEC 1147:2010 Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the Grip Testerę; German version CEN/TS 15901-7:2009
DIN EN 6096:2019 Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series; German and English version EN 6096:2019
DIN EN 3048:2006-03 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001
DIN EN 2584:2018 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2584:2018
DIN EN 2584:2019 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2584:2019
DIN EN 2585:2019 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2019
DIN EN 2585:2018 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2585:2018
DIN EN 6096:2019-08 Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series; German and English version EN 6096:2019
DIN CEN/TS 15901-11:2011-06*DIN SPEC 91218-11:2011-06 Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM; German version CEN/TS 15901-11:2011
DIN CEN/TS 15901-13:2011-06*DIN SPEC 91218-13:2011-06 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph; German version CEN/TS 15901-13:2011
DIN CEN/TS 15901-8:2010-03*DIN SPEC 1148:2010-03 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM; German version CEN/TS 15901-8:2009
DIN EN ISO 10256-3:2019-06 Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016); German version EN ISO 10256-3:2018 / Note: DIN EN ISO 10256 (2004-02) remains valid alongside this standard until 2019-10-31.*Applies in conjunction wi...
DIN CEN/TS 13036-2:2010-06*DIN SPEC 1205:2010-06 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems; German version CEN/TS 13036-2:2010
DIN CEN/TS 15901-6:2010-03*DIN SPEC 1146:2010-03 Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM®; German version CEN/TS 15901-6:2009
DIN CEN/TS 15901-12:2011 Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT); German version CEN/TS 15901-12:2011
DIN 4141-13:2010 Structural bearings - Part 13: Guide bearings with sliding surfaces steel to steel - Design and manufacture
DIN CEN/TS 15901-10:2010-03*DIN SPEC 1150:2010-03 Road and airfield surface characteristics - Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): the Skiddometer BV-8; German version CEN/TS 15901-10:2009
DIN EN 13863-4:2012 Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres; German version EN 13863-4:2012
DIN EN 4040:2006-11 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads; German and English version EN 4040:2006
DIN EN 2585:2019-05 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2019
DIN EN 2584:2019-05 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2584:2019
DIN EN 4539-2:2019 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series; German and English version EN 4539-2:2019
DIN EN 2588:2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads; German and English version EN 2588:2006
DIN 4141-13:2010-07 Structural bearings - Part 13: Guide bearings with sliding surfaces steel to steel - Design and manufacture / Note: Applies in conjunction with DIN EN 1337-1 (2001-02), DIN EN 1337-9 (1998-04), DIN EN 1337-10 (2003-11), DIN EN 1337-11 (1998-04).

未注明发布机构, very slippery surface

BS EN 16165:2021(2022) Determination of slip resistance of pedestrian surfaces - Methods of evaluation
BS EN 2023:1989(1999) Specification for Bearings - spherical plain in corrosion resisting steel with self - lubricating liner — Normal series — Dimensions and loads
BS EN 2064:1992(2000) Bearings, spherical plain in corrosion resisting steel with self lubricating liner — Technical specification
BS EN 2022:1990(1999) Specification for Bearings, spherical plain in corrosion resisting steel with self - lubricating liner — Light series — Dimensions and loads

ES-UNE, very slippery surface

UNE-EN 16165:2022 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
UNE-EN ISO 18527-1:2022 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN 2755:2021 Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 6096:2019 Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in June of 2019.)
UNE-EN 4040:2006 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads (Endorsed by AENOR in June of 2006.)
UNE-EN 2585:2019 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN 2584:2019 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads (Endorsed by Asociación Española de Normalización in April of 2019.)

Group Standards of the People's Republic of China, very slippery surface

T/JJSY 005-2022 Umbrella products - Determination of resistance to slip at joint of umbrella surface

International Organization for Standardization (ISO), very slippery surface

ISO/TR 20051:2020 Spherical plain bearings — Derivation of the load rating factors
ISO 18527-1:2021 Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles
ISO 6959:1983 Cross-country ski boots with three pin holes; dimensions, interface and design
ISO 22264:2006 Telemark ski-boots for adults - Interface with Telemark ski-bindings - Requirements and test methods
ISO 20015:2017 Spherical plain bearings — Method for the calculation of static and dynamic load ratings
ISO 6960:1983 Cross-country ski bindings with three pins; dimensions, interface and design
ISO 7770:2006 Textiles - Test method for assessing the smoothness appearance of seams in fabrics after cleansing
ISO 7770:2009 Textiles - Test method for assessing the smoothness appearance of seams in fabrics after cleansing
ISO 7862:2004 Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
ISO 8791-4:2007 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 12129-2:1995 Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
ISO 8791-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO/FDIS 10256-3 Protective equipment for use in ice hockey — Part 3: Face and eye protectors for skaters

SG-SPRING SG, very slippery surface

SS 485-2001 SPECIFICATION FOR Slip resistance classification of public pedestrian surface materials

AGMA - American Gear Manufacturers Association, very slippery surface

14FTM17-2014 The Impact of Surface Condition and Lubricant on Gear Tooth Friction
91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
16FTM14-2016 Impact of Surface Condition and Lubricant on Effective Gear Tooth Friction Coefficient
01FTM11-2001 Kinematic and Force Analysis of a Spur Gear System with Separation of Sliding and Rolling between Meshing Profiles

AT-ON, very slippery surface

ONORM B 5106-1996 Sewage behaviour of cleaning or preservative agents in car washing stations or bays for exterior cleaning of vehicles with surfaces, with no or little oil coverage - Requirements, testing, marking of conformity
ONORM S 4074-1990 Cross-country ski - Binding moun ting area- Requirements on fest screws - marking of conformity Skis de fand - Zone de montage de la fixation - Exigences pour des vis d'essai
ONORM S 1442-1979 Textile upholstery fabrics; testing of seam sliding resistance of woven upholstery fabrics
ONORM EN 2585-1992 Aerospace series - Bearings, spherical piain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated loads at ambient temperature - Dimensions and loads
ONORM EN 2584-1992 Aerospace series - Bearings, spherical piain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated loads at ambient temperature - Dimensions and loads

(U.S.) Ford Automotive Standards, very slippery surface

FORD WSS-M2C942-A-2012 LUBRICANT, GENERATION III, FUEL EFFICIENT HYPOID GEAR LUBE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C942-A-2014 LUBRICANT, GENERATION III, FUEL EFFICIENT HYPOID GEAR LUBE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD EST-M2C108-C-2004 LUBRICANT, HYPOID GEAR - SAE 90 SULFUR PHOSPHORUS 6.5% ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M99J367-A-2012 TOPCOAT, ONE PACK, STONE PECK PROTECTION, SMOOTH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C192-B-2011 LUBRICANT, SAE 75W-140, HYPOID GEAR, DURABILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C942-A-2008 LUBRICANT, GENERATION III, FUEL EFFICIENT HYPOID GEAR LUBE ***TO BE USED WITH FORD WSS-M99P1111-A***

IT-UNI, very slippery surface

PL-PKN, very slippery surface

PN K23002-1990 Covered goods bogie wagons with sliding walls Reauirements
PN F06100-02-1988 Furniture Testing methods for the properties of lacquered and decorative laminated surfacesDetermination of gloss
PN-EN 1176-3-2017-12 P Playground equipment and surfacing--Part 3: Additional specific safety requirements and test methods for slides

AASHTO - American Association of State Highway and Transportation Officials, very slippery surface

M 286-1996 Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests
M 286-2018 Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests
MP 14-2012 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
M 331-2017 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
M 331-2013 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
MP 14-2008 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
M286-1990 Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests (ASTM E524-88)
M286-1996 Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests (Nineteenth Edition; ASTM E524-94)

ESDU - Engineering Sciences Data Unit, very slippery surface

AERO W.02.04.03 A-1978 Profile drag of smooth aerofoils with straight trailing- edges at low speeds.
ESDU 15009-2016 Determination of hydroplaning speeds and corresponding hydrodynamic forces for rib tread aircraft tyres Application of ESDU 15003
AERO 00.02.05 A-1981 Heat transfer under conditions of forced convection for the subsonic turbulent flow of gases in smooth straight ducts of constant cross section.
AERO A.06.01.03 B-1973 Stability derivative (L sub v) sub gamma. Contribution of full-span dihedral to rolling moment due to sideslip.
ESDU 80033 A-1981 Contribution of wing planform to rolling moment derivative due to sideslip@ (L sub v) sub w@ at subsonic speeds.
AERO A.06.01.09 B-1988 Stability derivative (L sub v) sub gamma. Contribution of part-span dihedral to rolling moment due to sideslip.

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, very slippery surface

PREN 2501-1982 Bearings@ Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liners and Wide Inner Ring - Dimensions and Loads (C1/26)
PREN 2064-1980 Bearings Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liners Technical Specification Aerospace Series (Edition 1)
PREN 4613-2007 Spherical plain bearings in corrosion resisting steel with self-lubricating liner@ narrow series — Dimensions and loads — Inch series (Edition 1)
PREN 2501-1987 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner and Wide Inner Ring Dimensions and Loads
PREN 2022-1982 Bearings@ Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liner Light Series Dimensions and Loads Aerospace Series (Edition 2)
PREN 2023-1982 Bearings@ Spherical Plain in Corrosion Resisting Steel with Self Lubricating Liner Normal Series Dimensions and Loads Aerospace Series (Edition 2)
PREN 4040-1993 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Reduced Starting Torque with Wide Inner Ring Dimensions and Loads
PREN 4540-2010 Aerospace series Bearings@ spherical plain@ in corrosion resisting steel with self-lubricating liner Elevated load under low oscillations Technical specification (Edition P 2)
PREN 4614-2007 Aerospace series Spherical plain bearings in corrosion resisting steel with self-lubricating liner@ wide series — Dimensions and loads — Inch series (Edition P 1)
PREN 2584-2017 Aerospace series - Bearing@ spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads (Edition P2)
PREN 4037-1993 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner@ Reduced Starting Torque Light Series@ Dimensions and Loads
PREN 4038-1993 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Reduced Starting Torque Normal Narrow Series Dimensions and Loads
PREN 2755-2008 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Loads at Ambient Temperature Technical Specification (Edition P3)
PREN 4540-2001 Aerospace Series Bearings@ Spherical Plain@ in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Technical Specification (Edition P 1)
PREN 2585-1988 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner@ Wide Series Elevated Loads at Ambient Temperature Dimensions and Loads (Issue P 1)
PREN 2585-2017 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner@ Wide Series Elevated Loads at Ambient Temperature Dimensions and Loads (Edition P 2)
PREN 4037-1996 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Reduced Starting Torque Light Series Dimensions and Loads (Edition P 1)
PREN 2755-1995 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Loads at Ambient Temperature Technical Specification (Edition P 2)
PREN 2584-1988 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner@ Narrow Series Elevated Loads at Ambient Temperature Dimensions and Loads (Issue P 1)
PREN 3048-1988 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner@ Light Series Elevated Loads at Ambient Temperature Dimensions and Loads (Issue P 1)
PREN 2335-1993 Aerospace Series Bearings-Spherical Plain in Corrosion Resisting Steel without Assembly Slots Dimensions and Loads
PREN 2588-1987 Aerospace Series Bearings-Spherical Plain in Corrosion Resisting Steel with Assembly Slots Dimensions and Loads

Defense Logistics Agency, very slippery surface

DLA A-A-59658 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASW)
DLA A-A-59658 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASW)
DLA A-A-59658 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, Straight Bore, Two Single Cones With Contacting Front Faces Slotted and Chamfered for Lubrication, One Double Cup With Lubrication Holes and Groove (TYPE TNASW)

工业和信息化部, very slippery surface

QB/T 5352-2018 Artificial Leather Test Methods for Synthetic Leather Determination of Surface Slippery

National Aeronautics and Space Administration (NASA), very slippery surface

NASA NACA-WR-L-628-1944 Tests of the Northrop MX-334 glider airplane in the NACA full-scale tunnel

KR-KS, very slippery surface

KS B ISO 4703-2022 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
KS B ISO 20015-2021 Spherical plain bearings — Method for the calculation of static and dynamic load ratings
KS B ISO 4703-2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
KS B ISO 12167-1-2019 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves

Korean Agency for Technology and Standards (KATS), very slippery surface

KS G ISO 22264:2009 Telemark ski-boots for adults－ Interface with Telemark ski-bindings－ Requirements and test methods
KS B ISO 20015:2021 Spherical plain bearings — Method for the calculation of static and dynamic load ratings
KS W ISO 10792-1-2004(2014) Aerospace－Airframe spherical plain bearings incorrosion-resisting steel with self-lubricating liner－Part 1：Metric series
KS W ISO 10792-2-2004(2019) Aerospace－Airframe spherical plain bearings incorrosion-resisting steel with self-lubricating liner－Part 2：Inch series
KS W ISO 10792-3-2004(2019) Aerospace－Airframe spherical plain bearings incorrosion-resisting steel with self-lubricating liner－Part 3：Technical specification
KS G ISO 5904-2003(2008) Gymnastic equipment－Landing mats and surfaces for floor exercises－Determination of resistance to slipping
KS M ISO 6295:2003 Petroleum products－Mineral oils－Determination of interfacial tension of oil against water－Ring method
KS K ISO 7770:2010 Textiles-Test method for assessing the smoothness appearance of seams in fabrics after cleansing
KS K ISO 7770:2015 Textiles－Test method for assessing the smoothness appearance of seams in fabrics after cleansing
KS G ISO 9465:2004 Alpine ski-bindings-Lateral release under impact loading-Test method
KS G ISO 9465:2014 Alpine ski-bindings — Lateral release underimpact loading — Test method
KS R ISO 7862-2008(2018) Road vehicles－Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
KS B ISO 4703:2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
KS R ISO 7862:2008 Road vehicles-Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
KS R ISO 7862-2023 Road vehicle pulley test process to evaluate restraint systems through simulated frontal collisions
KS B ISO 12167-1:2019 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12129-2:2002 Plain bearings－Part 2：Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

CH-SNV, very slippery surface

SNV 10121-1943

Professional Standard - Petrochemical Industry, very slippery surface

NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry

RU-GOST R, very slippery surface

GOST R ISO 7768-2015 Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
GOST R 52299-2013 Children's playgrounds equipment and surfacing. Slide's safety of structure and test methods. General requirements
GOST R 50815-1995 Industrial purity. Lubricating and cooling fluids. Requirements for purity of cutting fluids at external cylindrical grinding and surface grinding with the periphery of the wheel
GOST R 58845-2021 Protective equipment for use in ice hockey. Requirements and test methods of face protection for skaters

CEN - European Committee for Standardization, very slippery surface

EN 13863-4:2004 Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres
EN 2585:2019 Aerospace series - Bearing@ spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
EN 2584:2019 Aerospace series - Bearings@ spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads

Association of German Mechanical Engineers, very slippery surface

VDI 2126-1989 Planar mechanisms; transfer of a rocker motion a slider motion with regard to optimum transmission angle
VDI 2125-1987 Planar mechanisms; transfer of a slider motion into a rocker motion with regard to optimum transmission angle
VDI 2729 Blatt 1-2016 Modular analysis of planar linkages with rotating and sliding joints - Kinematic analysis

GB-REG, very slippery surface

REG NASA-LLIS-0842-2000 Lessons Learned ?Common Charge Points for Lubrication Systems for Mechanical Ground Support Equipment

BR-ABNT, very slippery surface

ABNT PB-29-1979

NL-NEN, very slippery surface

NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties

ACI - American Concrete Institute, very slippery surface

ACI 503.3M-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate
ACI 503.3-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., very slippery surface

ASHRAE 3843-1995 Heat Transfer of R-134a in Single-Tube Spray Evaporation Including Lubricant Effects and Enhanced Surface Results

Aerospace, Security and Defence Industries Association of Europe (ASD), very slippery surface

ASD-STAN PREN 2755-2008 Aerospace Series Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Loads at Ambient Temperature Technical Specification (Edition P3)

国家市场监督管理总局、中国国家标准化管理委员会, very slippery surface

GB/T 39741.2-2021 Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars

VN-TCVN, very slippery surface

TCVN 2336-1978 Pulleys for driving V-belts with spokes and boss protruding from one rim face.Basic dimensions