ZH
RU
ES

second calorimeter method

second calorimeter method, Total:499 items.

In the international standard classification, second calorimeter method involves: Thermodynamics and temperature measurements, Metrology and measurement in general, Organic chemicals, Optoelectronics. Laser equipment, Installations in buildings, Protection against fire, Electromechanical components for electronic and telecommunications equipment, Analytical chemistry, Electronic display devices, Ergonomics, Resistors, Semiconductor devices, Non-ferrous metals, Farming and forestry, Domestic safety, Domestic, commercial and industrial heating appliances, Equipment for the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Radiocommunications, Electronic tubes, Air quality, Audio, video and audiovisual engineering, Ferrous metals, Education, Burners. Boilers, Refrigerating technology, Kitchen equipment, Protection of and in buildings, Television and radio broadcasting, Fuels, Nuclear energy engineering, Medical equipment, Elements of buildings, Vocabularies, Semiconducting materials, Ceramics, Construction materials, Plastics, Fluid storage devices, Solar energy engineering, Acoustics and acoustic measurements, Measurement of volume, mass, density, viscosity, Characteristics and design of machines, apparatus, equipment, Natural gas, Aerospace electric equipment and systems, Metalliferous minerals, Lubricants, industrial oils and related products, Automatic controls for household use, Inorganic chemicals, Rubber, Fertilizers, Paint ingredients, Products of the chemical industry, Electromagnetic compatibility (EMC).


National Metrological Verification Regulations of the People's Republic of China, second calorimeter method

  • JJG(轻工) 105-1994 Refrigeration compressor calorimeter (second refrigerant calorimeter method) verification regulations

Canadian Standards Association (CSA), second calorimeter method

  • CSA P.6-2009 Test method for measuring thermal efficiency of gas-fired pool heaters (Second Edition)
  • CAN/CSA-P.7-2010 Test method for measuring energy loss of gas-fired instantaneous water heaters (Second Edition; Update No. 1: September 2010; Update No. 2: May 2011)
  • CSA P.7-2010 Méthode d’essai pour mesurer les pertes de chaleur des chauffe-eau instantanés au gaz (Deuxième édition; Mise à jour no 1: Septembre 2010; Mise à jour no 2: Mai 2011)
  • CSA CGA P.6-1993-1993 Testing Method for Measuring Thermal and Operating Efficiencies of Gas-Fired Pool Heaters First Edition
  • CAN/CSA-E60335-2-61-2011 Household and similar electrical appliances — Safety — Part 2-61: Particular requirements for thermal storage room heaters (Second Edition)
  • CSA P.7-98-CAN/CSA-1998 Testing Method for Measuring Energy Loss of Gas-Fired Instantaneous Water Heaters First Edition; General Instructions No. 1
  • CAN/CSA-C62301-2011 Household electrical appliances — Measurement of standby power (Second Edition)
  • CSA P.3-2004 Méthode d’essai pour mesurer la consommation d’énergie et le rendement énergétique des chauffe-eau au gaz à accumulation (deuxième édition; Mise à jour no 1: Février 2006; Mise à jour no 2: Mars 2006)
  • CSA CAN3-B140.9.3-M86-1986 Portable kerosine-fired heaters (Second Edition; General Instruction No. 1: February 1986)
  • CSA C652-2000 Installation des chauffe-eau électriques à accumulation et des chauffe-eau à pompe à chaleur pour usage domestique (Deuxième édition; Fiche n? 1: Juin 2002; Mise à jour no 2: Octobre 2002)
  • CAN/CSA-ISO 13485:2003 Medical devices - Quality management systems - Requirements for regulatory purposes (Second Edition)
  • CSA B211-2000 Rendement énergétique des chauffe-eau au mazout à accumulation (Deuxième édition; Mise à jour no 2: Février 2003)
  • CSA Z259.11-2005 Energy absorbers and lanyards (Second Edition; Update No. 1: October 2007)
  • CAN/CSA-E60335-2-15-2005 Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids (Second Edition)
  • CSA C380-2011 Mode opératoire pour mesurer la consommation d’énergie des décodeurs (Deuxième édition; Mise à jour no 1: Ao?t 2012)
  • CAN/CSA-E60335-2-35-2001 Safety of household and similar electrical appliances - Part 2-35: Particular requirements for instantaneous water heaters (Second Edition; General Instruction No. 1: June 2001)
  • CSA P.3-2015 Testing method for measuring energy consumption and determining efficiencies of gas-fired and fuel oil-fired water heaters (Third Edition)
  • CAN/CSA-P.11-2008 Testing method for measuring efficiency and energy consumption of gas-fired unit heaters (First Edition; Update No. 1: July 2008)
  • CAN/CSA-C61000-4-30-2010 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (Second Edition)
  • CAN/CSA-C652-2000 Installation of electric storage tank and heat pump water heaters for residential use (Second Edition; General Instruction No. 1: November 2000; Update No. 2: October 2002)

ECSS - European Cooperation for Space Standardization, second calorimeter method

  • Q-ST-70-09C-2008 Measurements of thermo-optical properties of thermal control materials (Second Issue)

API - American Petroleum Institute, second calorimeter method

  • API RP 534-2007 Heat Recovery Steam Generators (SECOND EDITION)
  • API RP 535 RUSSIAN-2006 Burners for Fired Heaters in General Refinery Servies (Second Edition)
  • API RP 573-2003 Inspection of Fired Boilers and Heaters (Second Edition)
  • API RP 572-2001 Inspection of Pressure Vessels (Towers@ Drums@ Reactors@ Heat Exchangers@ and Condensers) (Second Edition)
  • API RP 572 CHINESE-2001 Inspection of Pressure Vessels (Towers@ Drums@ Reactors@ Heat Exchangers@ and Condensers) (Second Edition)
  • API RP 530-1978 Recommended Practice for Calculation of Heater-Tube Thickness in Petroleum Refineries (Second Edition)
  • API RP 556-2011 Instrumentation@ Control@ and Protective Systems for Gas Fired Heaters (Second Edition)
  • API RP 556 RUSSIAN-2011 Instrumentation@ Control@ and Protective Systems for Gas Fired Heaters (Second Edition)
  • API RP 535-2006 Burners for Fired Heaters in General Refinery Services (Second Edition)
  • API RP 532-1982 Measurement of the Thermal Efficiency of Fired Process Heaters (First Edition)
  • API STD 661-1978 Air-Cooled Heat Exchangers for General Refinery Service (Second Edition)
  • API IRE C9-1967 Guide for Inspection of Refinery Equipment Chapter IX-Fired Heaters and Stacks (Second Edition)
  • API RP 631M-1981 Measurement of Noise from Air-Cooled Heat Exchangers (FIRST EDITION)
  • API RP 531M-1980 Measurement of Noise from Fired Process Heaters (First Edition)
  • API STD 630-1961 TUBE AND HEADER DIMENSIONS FOR FIRED HEATERS FOR REFINERY SERVICES (Second Edition)
  • API RP 64 KAZAKH-2001 Recommended Practice for Diverter Systems Equipment and Operations (Second Edition)
  • API RP 64-2001 Recommended Practice for Diverter Systems Equipment and Operations (SECOND EDITION)
  • API RP 64 RUSSIAN-2001 Recommended Practice for Diverter Systems Equipment and Operations (Second Edition)

RO-ASRO, second calorimeter method

  • STAS 12123/1-1982 Semiconductor devices RECTIFIER DIODES Measuring methods for electrical and thermal characteristics
  • STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
  • STAS 10361/2-1975 ELECTRIC STORAGE-WATER HEATERS FOR DOMESTIC USE Methods for measuring the performance

RU-GOST R, second calorimeter method

  • GOST 8.394-1980 State system for ensuring the uniformity of measurements Q-0272-2 second order of accuracy quality factor standard measures. Methods and means of verification
  • GOST 21342.7-1976 Thermal resistors. Method of measuring resistance
  • GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling
  • GOST 19656.15-1984 Semiconductor UHF diodes. Measurement methods of thermal resistance and pulse thermal resistance
  • GOST 25312-1982 Measuring thermal thermoelectric laser radiation transducers. Types and basic parameters. Measuring methods
  • GOST R EN 14705-2011 Heat exchangers. Methods of measurement and evaluation of thermal performances of wet cooling towers
  • GOST 21342.8-1976 Thermal resistors. Method of measuring resistance temperature coefficient
  • GOST 13384-1993 Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests
  • GOST 13384-1981 Measuring transformers for thermocouple and resistance thermometers SSI. General technical conditions
  • GOST R 8.789-2012 State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
  • GOST R 51106-1997 Lazers injection, lazer heads, lazers diodes matices, lazers diodes. Methods for measurement of parameters
  • GOST R 50356-1992 Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests
  • GOST R 8.816-2013 State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter
  • GOST R 8.914-2016 The state system for ensuring the uniformity of measurements. The gas calorimeters. The verification method
  • GOST R EN 12098-5-2012 Measuring, operating and controls for heating systems. Part 5. Start-stop schedulers for heating systems
  • GOST R 50484-1993 Phthalic anhydride for industrial use. Methods of test. Part 4. Determination of phthalic anhydride content. Titrimetric method
  • GOST 8.448-1985 State system for ensuring the uniformity of measurements. The calorimetric measuring primary transducers. Method of verification
  • GOST R EN 306-2011 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
  • GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., second calorimeter method

  • ASHRAE OR-94-10-1994 Advances in Enhanced Heat and Mass Transfer in Heat Exchangers - Part II
  • ASHRAE 4302-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part II: Data and Analysis (RP-824)
  • ASHRAE 3684-1993 Guarded Hot Box Measurements of the Dynamic Heat Transmission Characteristics of Seven Wall Specimens - Part II
  • ASHRAE 4327-2000 Second Law Analysis of Multi-Stage Lithium Bromide/Water Absorption Heat Transformers
  • ASHRAE OR-05-10-3-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part II: Current Research on Evaporators at KTH
  • ASHRAE LV-11-029-2011 Fuel and CO2 Emissions Savings Calculation Methodology for Combined Heat and Power (CHP) Systems
  • ASHRAE 4114-1998 Heat and Moisture Transfer in Desiccant Coated Rotary Energy Exchangers: Part II - Validation and Sensitivity Studies (The full text of this paper can be found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Reasea
  • ASHRAE 84-2013 Method of Testing Air-to-Air Heat/Energy Exchangers
  • ASHRAE 3692-1993 Energy Use and Heat Recovery in Water-Loop Heat Pump@ Variable- Air-Volume@ Four-Pipe Fan Coil@ and Reheat HVAC Systems: Part II

Professional Standard - Petrochemical Industry, second calorimeter method

  • SH/T 1499.10-2012 Pure adipic acid.Part 10:Determination of content of moisture.Thermogravimetric method
  • SH/T 0792-2007 Standard test method for 2,6-di-tert-butyl-p-cresol and 2,6-di-tert-butyl phenol in electrical insulating oil by infrared absorption

ISA - International Society of Automation, second calorimeter method

IN-BIS, second calorimeter method

工业和信息化部, second calorimeter method

  • SJ/T 2658.15-2016 Measurement methods for semiconductor infrared emitting diodes Part 15: Thermal resistance
  • YS/T 1200.1-2017 Methods for chemical analysis of 1,1'-bisdiphenylphosphine ferrocene palladium dichloride Part 1: Determination of palladium content Diacetyl oxime gravimetric method
  • YS/T 1208.1-2017 Methods for chemical analysis of bis(acetonitrile)palladium dichloride Part 1: Determination of palladium content Diacetyl oxime gravimetric method
  • YS/T 1395.1-2020 Methods for chemical analysis of palladium dichlordiammonium chloride Part 1: Determination of palladium content Hydrazine hydrate reduction gravimetric method
  • SJ/T 11461.6.2-2016 Organic light-emitting diode display devices Part 6-2: Test methods - Visual quality
  • YS/T 424.5-2022 Methods for chemical analysis of titanium diboride powder Part 5: Determination of oxygen content Pulse heating inert gas melting-infrared absorption method
  • YS/T 1316.1-2019 Methods for chemical analysis of 1,2-bisdiphenylphosphine ethane palladium chloride Part 1: Determination of palladium content diacetyl oxime gravimetric method
  • YS/T 1396.1-2020 Methods for chemical analysis of tetraammine platinum dichloride Part 1: Gravimetric method for determination of platinum content
  • YS/T 540.2-2018 Methods for chemical analysis of vanadium Part 2: Determination of chromium amount diphenylcarbazide spectrophotometric method
  • YS/T 445.12-2019 Methods for chemical analysis of silver concentrates Part 12: Determination of chromium content diphenylcarbazide photometric method
  • YS/T 1047.8-2015 Methods for chemical analysis of copper magnetite Part 8: Gravimetric method for determination of silica content
  • YS/T 1121.1-2016 Methods for chemical analysis of palladium chloride Part 1: Determination of palladium content Diacetyl oxime gravimetric method
  • YS/T 1342.1-2019 Methods for chemical analysis of secondary battery waste Part 1: Determination of nickel content Diacetyl oxime gravimetric method and flame atomic absorption spectrometry

European Committee for Electrotechnical Standardization（CENELEC）, second calorimeter method

  • EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
  • EN IEC 63159-2-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1: Multifunctional electric instantaneous water heaters
  • FPREN 50193-1-2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
  • EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
  • EN IEC 63159-2-2:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2: Efficiency of single point of use electric instantaneous water heaters
  • HD 500 S1-1988 Methods to be Used for Measuring Energy Consumption of Thermal Storage Water Heaters and for the Purpose of Informing Consumers of it
  • EN 62341-6-2:2012 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance
  • EN 62341-5-3:2013 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime
  • EN 62341-6-1:2011 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters

Lithuanian Standards Office , second calorimeter method

  • LST EN 50193-2-1/A1-2020 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
  • LST EN 50193-1/A1-2020 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
  • LST EN 62341-6-3-2013 Organic light emitting diode (OLED) displays -- Part 6-3: Measuring methods of image quality (IEC 62341-6-3:2012)
  • LST EN 14705-2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
  • LST EN 61146-2-2001 Video cameras (PAL/SECAM/NTSC). Methods of measurement. Part 2: Two-and three-sensor professional cameras (IEC 61146-2:1997)
  • LST EN 50193-2001 Closed electrical instantaneous water heaters. Methods for measuring performance
  • LST EN 306-2001 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
  • LST EN 442-2-2000/A1-2004 Radiators and convectors - Part 2: Test methods and rating
  • LST EN 442-2-2000 Radiators and convectors - Part 2: Test methods and rating
  • LST EN 442-2-2000/A2-2004 Radiators and convectors - Part 2: Test Methods and rating

Association Francaise de Normalisation, second calorimeter method

  • NF C73-193-2-1*NF EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1 : methods for measuring the performance - Multifunctional electric instantaneous water heaters
  • NF EN 50193-2-1/A1:2020 Chauffe-eau électriques instantanés - Partie 2-1 : méthodes de mesure de l'aptitude à la fonction - Chauffe-eau électriques instantanés multifonctions
  • NF EN 50193-2-1:2016 Chauffe-eau instantanés électriques - Partie 2-1 : méthodes de mesure de l'aptitude à la fonction - Chauffe-eau instantanés électriques multifonctions
  • NF C73-163-2-1*NF EN IEC 63159-2-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1 : multifunctional electric instantaneous water heaters
  • NF EN IEC 63159-2-1:2021 Chauffe-eau instantanés électrodomestiques - Méthodes de mesure de l'aptitude à la fonction - Partie 2-1 : chauffe-eau instantanés électriques multifonctions
  • NF EN IEC 63159-2-2:2021 Chauffe-eau instantanés électrodomestiques - Méthodes de mesure de l'aptitude à la fonction - Partie 2-2 : rendement des chauffe-eau instantanés électriques à un seul point d'utilisation
  • NF C73-193-1*NF EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1 : general requirements
  • NF EN 50193-1/A1:2020 Chauffe-eau électriques instantanés - Méthodes de mesure de l'aptitude à la fonction - Partie 1 : exigences générales
  • NF EN 50193-1:2016 Chauffe-eau électriques instantanés - Méthodes de mesure de l'aptitude à la fonction - Partie 1 : exigences générales
  • NF EN IEC 63159-1:2021 Chauffe-eau instantanés électrodomestiques - Méthodes de mesure de l'aptitude à la fonction - Partie 1 : aspects généraux
  • NF C96-541-6-3*NF EN 62341-6-3:2012 Organic light emitting diode (OLED) displays - Part 6-3 : measuring methods of image quality
  • NF C73-163-2-2*NF EN IEC 63159-2-2:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2 : efficiency of single point of use electric instantaneous water heaters
  • NF P92-190-1*NF ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
  • NF C73-163-1*NF EN IEC 63159-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 1 : general aspects
  • NF EN 62341-6-3:2012 Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 6-3 : méthodes de mesure de la qualité des images
  • NF E38-322*NF EN 306:1997 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance.
  • NF EN 14705:2005 Échangeurs de chaleur - Méthode de mesure et évaluation des performances thermiques des aéroréfrigérants humides
  • NF E38-423*NF EN 14705:2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers.
  • NF EN 50350:2005 Systèmes de commande de charge des appareils de chauffage à accumulation à usage domestique - Méthodes de mesure de l'aptitude à la fonction
  • NF C73-193:2014 Closed electrical instantaneous water heaters - Methods for measuring performance
  • NF C73-256/A11*NF EN 60531/A11:2019 Household electric thermal storage room heaters - Methods for measuring performance
  • NF EN 60531/A11:2019 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60531:2001 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60379:2004 Méthodes de mesure de l'aptitude à la fonction des chauffe-eau électriques à accumulation pour usages domestiques
  • NF C96-541-6-2*NF EN 62341-6-2:2012 Organic light emitting diode (OLED) displays - Part 6-2 : measuring methods of visual quality and ambient performance
  • NF EN 196-11:2018 Méthodes d'essais des ciments - Partie 11 : chaleur d'hydratation - Méthode par calorimétrie à conduction isotherme
  • NF P15-471-11*NF EN 196-11:2018 Methods of testing cement - Part 11 : heat of hydration - Isothermal Conduction Calorimetry method
  • NF C73-221*NF EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purpose
  • NF EN 60675:2015 Appareils électrodomestiques de chauffage des locaux à action directe - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60675/A1:2015 Appareils électrodomestiques de chauffage des locaux à action directe - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60675/A2:2018 Appareils électrodomestiques de chauffage des locaux à action directe - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60675/A11:2019 Appareils électrodomestiques de chauffage des locaux à action directe - Méthodes de mesure de l'aptitude à la fonction
  • NF P92-190-1/A1*NF ISO 5660-1/A1:2020 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1 : heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) - Amendment 1
  • NF EN 306:1997 Échangeurs thermiques - Méthodes de mesurage des paramètres nécessaires à l'évaluation des performances
  • NF C96-541-5-3*NF EN 62341-5-3:2014 Organic light emitting diode (OLED) displays - Part 5-3 : measuring methods of image sticking and lifetime
  • NF EN 62341-5-3:2014 Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 5-3 : méthodes de mesure de la durée de vie et de la rémanence d'images
  • NF EN 62341-6-1:2011 Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 6-1 : méthodes de mesure des paramètres optiques et électro-optiques
  • NF T46-051-2*NF ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: determination of styrene/butadiene/isoprene ratio
  • NF T31-117-20*NF EN ISO 3262-20:2021 Extenders - Specifications and methods of test - Part 20 : fumed silica
  • NF P52-011-2/A2*NF EN 442-2/A2:2003 Radiators and convectors - Part 2 : test methods and rating.
  • NF P52-011-2*NF EN 442-2:2016 Radiators and convectors - Part 2: test methods and rating
  • NF EN 442-2/A1:2000 Radiateurs et convecteurs - Partie 2 : méthodes d'essai et d'évaluation
  • NF EN 442-2/A2:2003 Radiateurs et convecteurs - Partie 2 : méthodes d'essai et d'évaluation
  • NF EN 442-2:2016 Radiateurs et convecteurs - Partie 2 : méthodes d'essai et d'évaluation
  • NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
  • NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
  • NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity

ES-UNE, second calorimeter method

  • UNE-EN 50193-2-1:2016/A1:2021 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
  • UNE-EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
  • UNE-EN IEC 63159-2-1:2022 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1: Multifunctional electric instantaneous water heaters
  • UNE-EN IEC 63159-2-2:2022 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2: Efficiency of single point of use electric instantaneous water heaters
  • UNE-EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
  • UNE-EN 50193-1:2016/A1:2021 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
  • UNE-EN 60531:2002/A11:2020 Household electric thermal storage room heaters - Methods for measuring performance
  • UNE-EN IEC 63159-1:2022 Household electric instantaneous water heaters - Methods for measuring the performance - Part 1: General aspects
  • UNE-EN 62341-6-3:2012 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality (Endorsed by AENOR in November of 2012.)
  • UNE-EN 61146-2:1997 VIDEO CAMERAS (PAL/SECAM/NTSC). METHODS OF MEASUREMENT. PART 2: TWO AND THREE SENSOR PROFFESIONAL CAMERAS (Endorsed by AENOR in June of 1998.)
  • EN IEC 60379:2023 Methods for measuring the performance of electric storage water heaters for household purposes
  • UNE-EN 62341-6-2:2012 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance (Endorsed by AENOR in June of 2012.)
  • UNE-EN 196-11:2019 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
  • UNE-EN 60675:1997/A11:2020 Household electric direct-acting room heaters - Methods for measuring performance
  • UNE-EN 60675:1997/A2:2019 Household electric direct-acting room heaters - Methods for measuring performance
  • UNE-EN 62341-5-3:2013 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime (Endorsed by AENOR in January of 2014.)
  • UNE-ISO 9869-1:2023 Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
  • UNE-EN 442-2:2015 Radiators and convectors - Part 2: Test methods and rating

BE-NBN, second calorimeter method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, second calorimeter method

  • GB/T 13754-1992 Test method of thermal output of heat emittor
  • GB/T 13754-2008 Test methods of thermal of output of heating radiators
  • GB 6667-1986 Methods of measurement for equipment used in terrestrial radio－elay systems－Part 2: Measurements for sub－systems－Section two: measurements in the antennas and passive repeaters
  • GB 11186.2-1989 Measurement method of coating film color Part 2 Color measurement
  • GB 11299.8-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 2 Subsystem Measurements Section 4 Upconverters and Downconverters
  • GB/T 7287.7-1987 Measuring method for electric-to-radiant power transfer efficiency of infrared heater
  • GB/T 27698.2-2023 Performance test methods for heat exchangers and heat transfer elements - Part 2: Heat exchangers
  • GB 11299.9-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 2 Subsystem Measurements Section 7 Frequency Modulator Section 8 Frequency Demodulator
  • GB/T 7287.9-1987 Measuring method for normal total emittance of infrared heater
  • GB/T 7287.6-1987 Measuring method for insulation resistance of infrared heater
  • GB/T 27698.3-2011 Test method for the performance of heat exchangers and heat exchange element. Part 3:Plate heat exchanger
  • GB/T 7287.10-1987 Measuring method for normal spectral emittance of infrared heater
  • GB 11299.7-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 2 Subsystem Measurements Section 3 Low Noise Amplifier
  • GB 11299.10-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 2 Subsystem Measurements Section 10 High Power Amplifier
  • GB/T 27698.2-2011 Test method for the performance of heat exchangers and heat exchange element.Part 2:Tubular heat exchanger
  • GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
  • GB/T 18443.1-2001 Testing method of cryo-insulation pressure vessels volume measurement
  • GB/T 27698.5-2011 Test method for the performance of heat exchangers and heat exchange element.Part 5:Heat transfer tube for tubular heat exchangers
  • GB/T 27698.8-2011 Test method for the performance of heat exchangers and heat exchange element.Part 8:Determination of industrial locale for heat exchangers
  • GB/T 27698.4-2011 Test method for the performance of heat exchangers and heat exchange element.Part 4:Spiral heat exchanger
  • GB/T 23513.5-2009 Chemical analysis methods for germanium concentrate.Part 5:Determination of silica content.Gravimetry
  • GB/T 23274.1-2009 Methods for chemical analysis of stannic oxide.Part 1:Determination of stannic oxide content.Potassium iodate titrimetric method
  • GB/T 4325.19-2013 Methods for chemical analysis of molybdenum.Part 19:Determination of chromium content.Diphenylcarbazide spectrophotometry
  • GB/T 6489.1-2001 Phthalate esters for industrial use-Methods of test-Measurement of colour after heat treatment
  • GB/T 18443.6-2010 Testing method of performance for vacuum insulation cryogenic equipment.Part 6:Heat-leak rate measurement
  • GB/T 18443.2-2001 Testing method of cryo-insulation pressure vessels vacuum measurement
  • GB/T 7287.2-1987 Measuring method for the surface temperature distribution of infrared heater
  • GB/T 23274.2-2009 Methods for chemical analysis of stannic oxide.Part 2:Determination of iron content.1，10-phenanthroline photometric method
  • GB/T 8446.2-2004 Heat sink for power semiconductor device Part 2:Measuring method of thermal resistance and input fluid-output fluid pressure difference
  • GB/T 27698.3-2023 Performance test methods for heat exchangers and heat transfer elements Part 3: Heat transfer elements
  • GB/T 14849.11-2016 Methods for chemical analysis of industrial silicon - Part 11: Determination of chromium content - Diphenylcarbazide spectrophotometric method
  • GB/T 16701.2-1996 Standard test methods for thermocouple materials. Part 2: methods for measuring the thermoelectric force of base metal thermocouple wires
  • GB/T 16701.1-1996 Standard test methods for thermocouple materials. Part 1: methods for measuring the thermoelectric force of noble metal thermocouple wires
  • GB/T 2441.2-2010 Determination of urea-Part2: Biuret content-Spectrophotomatric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, second calorimeter method

  • GB/T 13754-2017 Test methods of thermal output of heating radiators
  • GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity

ES-AENOR, second calorimeter method

  • UNE 9-106-1992 Boilers,economizers,reheaters superheaters and pressure ressels.Quality contril dossier
  • UNE 77-076 Pt.2-1991 Water quality. Detection and enumeration of faecal streptococci. Part 2: Method by membrane filtration

International Organization for Standardization (ISO), second calorimeter method

  • ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
  • ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
  • ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
  • ISO 3148:1975 Radiators, convectors and similar appliances; Determination of thermal output; Test method using air-cooled closed booth
  • ISO 3149:1975 Radiators, convectors and similar appliances; Determination of thermal output; Test method using liquid-cooled closed booth
  • ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
  • ISO 9806-3:1995 Test methods for solar collectors - Part 3: Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop
  • ISO 7270-2:2005 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
  • ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
  • ISO 9806-1:1994 Test methods for solar collectors - Part 1: Thermal performance of glazed liquid heating collectors including pressure drop
  • ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
  • ISO 90-1:1986 Light gauge metal containers; Definitions and determination methods for dimensions and capacities; Part 1 : Open-top cans
  • ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
  • ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

国家市场监督管理总局、中国国家标准化管理委员会, second calorimeter method

  • GB/T 8446.2-2022 Heat sinks for power semiconductor devices—Part 2: Measurement methods of thermal resistance and inlet-outlet fluid pressure drop
  • GB/T 20871.63-2021 Organic light emitting diode (OLED) displays—Part 6-3: Measuring methods of image quality
  • GB/T 37946-2019 Test method of thermal stability of materials for organic light emitting diode display (OLED)
  • GB/T 37945-2019 Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC)

Korean Agency for Technology and Standards (KATS), second calorimeter method

  • KS M 1932-2009 Urea for industrial use－Determination of biuret content－Photometric method
  • KS C 6564-2002(2022) Test methods of hot-film flow sensors
  • KS C IEC 60379:2002 Methods for measuring the performance of electric storage water－heaters for household purposes
  • KS C 6564-2002(2017) Test methods of hot-film flow sensors
  • KS C 6564-2002 Test methods of hot-film flow sensors
  • KS C IEC 60379-2002(2022) Methods for measuring the performance of electric storage water－heaters for household purposes
  • KS B 5265-2019 Reliability test method for the calculator of heat meter
  • KS C 7116-2008 Organic light emitting diode(OLED) displays－Measuring method of image sticking
  • KS C IEC 60531:2002 Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
  • KS B 50075-2-2005 Heat meters-Part 2:Test methods
  • KS C IEC 62341-6-4:2020 Organic light emitting diode(OLED) displays —Part 6-4: Measuring methods of transparent properties
  • KS C IEC 62341-6-2:2007 Organic light emitting diode(OLED) displays－Part 6－2：Measuring methods of visual quality
  • KS C IEC 62341-6-2:2020 Organic light emitting diode(OLED) displays — Part 6-2: Measuring methods of visual quality and ambient performance
  • KS C IEC 60531-2002(2022) Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
  • KS C 7116-2008(2018) Organic light emitting diode(OLED) displays－Measuring method of image sticking
  • KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
  • KS C IEC 62341-6-1:2020 Organic light emitting diode(OLED) displays — Part 6-1: Measuring methods of optical and electro-optical parameters
  • KS B ISO 9806-1-2003(2013) Test methods for solar collectors－Part 1：Thermal performance of glazed liquid heating collectors including pressure drop
  • KS C IEC 60675-2002(2017) Household electric direct－acting room heaters－Methods for measuring performance
  • KS C IEC 60675-2002(2022) Household electric direct－acting room heaters－Methods for measuring performance
  • KS B 8132-2-2012(2017) Gas-fired domestic appliances producing hot water－Appliances 70 kW heat input and 300 L water storage capacity－Part 2：Assessment of energy consumption
  • KS B 8132-1-2012(2017) Gas-fired domestic appliances producing hot water－Appliances 70 kW heat input and 300 L water storage capacity－Part 1：Assessment of performance of hot water deliveries
  • KS M ISO 7270-2:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 2：Determination of styrene/butadiene/isoprene ratio
  • KS M ISO 7270-2-2017(2022) Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
  • KS M ISO 7270-2:2017 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
  • KS B ISO 9806-3:2003 Test methods for solar collectors-Part 3:Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop
  • KS M ISO 12988-2:2010 Carbonaceous materials used in the production of aluminium-Baked anodes-Determination of the reactivity to carbon dioxide-Part 2:Thermogravimetric method
  • KS M ISO 12988-2:2013 Carbonaceous materials used in the production of aluminium－Baked anodes－Determination of the reactivity to carbon dioxide－Part 2：Thermogravimetric method

British Standards Institution (BSI), second calorimeter method

  • BS EN 50193-2-1:2016+A1:2020 Electric instantaneous water heaters - Methods for measuring the performance. Multifunctional electric instantaneous water heaters
  • BS 3999-2:1991 Methods of measuring the performance of household electrical appliances - Thermal storage electric water-heaters
  • BS EN IEC 63159-2-2:2021 Household electric instantaneous water heaters. Methods for measuring the performance - Efficiency of single point of use electric instantaneous water heaters
  • BS EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purposes
  • BS EN 50193-1:2016 Electric instantaneous water heaters. Methods for measuring the Performance. General requirements
  • BS EN 60531:2000+A11:2019 Household electric thermal storage room heaters. Methods for measuring performance
  • 21/30427874 DC BS ISO 9869-2 AMD1. Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance. Part 2. Infrared method for frame structure dwelling
  • 19/30367717 DC BS EN IEC 63159-2-1. Household electric instantaneous water heaters. Methods for measuring the performance. Part 2-1. Multifunctional electric instantaneous water heaters
  • BS EN 62341-6-3:2012 Organic light emitting diode (OLED) displays. Measuring methods of image quality
  • BS EN 50193-1:2016+A1:2020 Electric instantaneous water heaters. Methods for measuring the Performance - General requirements
  • 19/30367721 DC BS EN IEC 63159-2-2. Household electric instantaneous water heaters. Methods for measuring the performance. Part 2-2. Efficiency of single point of use electric instantaneous water heaters
  • BS EN 50193-2-1:2016 Electric instantaneous water heaters. Methods for measuring the performance. Multifunctional electric instantaneous water heaters
  • BS 3999-16:1993 Methods of measuring the performance of household electrical appliances. Electric warming plates
  • BS EN 14705:2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
  • BS EN IEC 63159-1:2021 Household electric instantaneous water heaters. Methods for measuring the performance - General aspects
  • BS EN IEC 60379:2023 Methods for measuring the performance of electric storage water heaters for household purposes
  • 14/30312971 DC BS EN 62341-6-3. Organic light emitting diode (OLED) displays. Part 6-3. Measuring methods of image quality
  • BS EN 61146-2:1997 Video cameras (PAL/SECAM/NTSC). Method of measurement. Two- and three-sensor professional cameras
  • 19/30367713 DC BS EN IEC 63159-1. Household electric instantaneous water heaters. Methods for measuring the performance. Part 1. General aspects
  • 20/30422991 DC BS EN IEC 60747-5-14. Semiconductor devices. Part 5-14. Optoelectronic devices. Light emitting diodes. Test method of the surface temperature based on the thermoreflectance method
  • BS EN 60675:1995 Household electric direct-acting room heaters - Methods for measuring performance
  • BS EN 50193:1997 Closed electrical instantaneous water heaters - Methods for measuring performance
  • BS IEC 62341-6-4:2017 Organic light emitting diode (OLED) displays - Measuring methods of transparent properties
  • BS EN 60531:2000 Household electric thermal storage room heaters - Methods for measuring performance
  • BS EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
  • BS 5711-10:1979 Methods of sampling and test for glycerol - Determination of arsenic content: silver diethyldithiocarbamate method
  • BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
  • BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
  • BS 4651-7:1988 Ammonia solution - Method for determination of carbon dioxide content
  • BS 1715-2.9:1990 Analysis of soaps - Quantitative test methods - Method for determination of EDTA content
  • 21/30367731 DC BS EN IEC 60379. Methods for measuring the performance of electric storage water-heaters for household purposes
  • BS 3999-1:1993 Methods of measuring the performance of household electrical appliances. Electric kettles and jugs
  • BS IEC 62830-2:2017 Semiconductor devices - Semiconductor devices for energy harvesting and generation. - Part 2: Thermo power based thermoelectric energy harvesting
  • PD IEC TS 62341-6-5:2019 Organic light emitting diode (OLED) displays. Measuring methods of dynamic range properties

Danish Standards Foundation, second calorimeter method

  • DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
  • DS/ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
  • DS/EN 62341-6-3:2012 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality
  • DS/HD 1215-2:1989 Radiator valves. Part 2: Dimensions and details on connection
  • DS/EN 61146-2:1998 Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras
  • DS/EN 14705:2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
  • DS/EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purposes
  • DS/EN 60531:2001 Household electric thermal storage room heaters - Methods for measuring performance
  • DS/EN 62341-6-2:2012 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance
  • DS/ENV 306:1991 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
  • DS/EN 306:1998 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
  • DS/EN 62341-6-1:2011 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
  • DS/EN 442-2/A2:2004 Radiators and convectors - Part 2: Test methods and rating
  • DS/EN 442-2/A1:2000 Radiators and convectors - Part 2: Test methods and rating
  • DS/EN 442-2:1997 Radiators and convectors - Part 2: Test methods and rating
  • DS/ISO 90-1:1987 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 1: Open-top cans
  • DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

CZ-CSN, second calorimeter method

  • CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
  • CSN 36 1321-1983 Non - instantaneous stationary water heaters. Methods for measuring the performance
  • CSN 36 1061-21-1996 Methods to be u?ed for measuring energy consumption of thermal storage water heaters and for the purpose of informing consumers of it
  • CSN 35 8850 Cast.1-1984 Semiconductor radiators. Main parameters of measuring methods

PL-PKN, second calorimeter method

Canadian Standards Association/American National Standards , second calorimeter method

AENOR, second calorimeter method

  • UNE-EN 60531:2002 Household electric thermal storage room heaters - Methods for measuring performance.
  • UNE-EN 14705:2006 Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers
  • UNE-EN 60379:2005 Methods for measuring the performance of electric storage water-heaters for household purposes
  • UNE-EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
  • UNE-EN 60675/A1:1999 HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS. METHODS FOR MEASURING PERFORMANCE
  • UNE-EN 60675:1997 HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS. METHODS FOR MEASURING PERFORMANCE.

International Electrotechnical Commission (IEC), second calorimeter method

  • IEC 62341-6-3:2017 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality
  • IEC 62341-6-3:2012 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality
  • IEC 63159-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 1: General aspects
  • IEC 63159-2-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1: Multifunctional electric instantaneous water heaters
  • IEC 60379:1987 Methods for measuring the performance of electrical water-heaters for household purposes
  • IEC 60675:1994/AMD1:1998 Household electric direct-acting room heaters - Methods for measuring performance; Amendment 1
  • IEC 60379:2023 Methods for measuring the performance of electric storage water heaters for household purposes
  • IEC 60747-5-14:2022 Semiconductor devices - Part 5-14: Optoelectronic devices - Light emitting diodes - Test method of the surface temperature based on the thermoreflectance method
  • IEC 63159-2-2:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2: Efficiency of single point of use electric instantaneous water heaters
  • IEC 62341-6-4:2017 Organic light emitting diode (OLED) displays - Part 6-4: Measuring methods of transparent properties
  • IEC 62341-6-2:2012 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance
  • IEC 62341-6-2:2015 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance
  • IEC 62341-5-3:2013 Organic Light Emitting Diode (OLED) displays - Part 5-: 3: Measuring methods of image sticking and lifetime
  • IEC TS 62341-6-5:2019 Organic light emitting diode (OLED) displays - Part 6-5: Measuring methods of dynamic range properties
  • IEC 60675:2018 Household electric direct-acting room heaters - Methods for measuring performance
  • IEC 62830-2:2017 Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 2: Thermo power based thermoelectric energy harvesting
  • IEC 62341-6-3:2017/COR1:2019 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
  • IEC 62341-6-1:2022 RLV Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
  • IEC 62341-5-3:2019 RLV Organic light emitting diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime
  • IEC 62341-6-1:2017 RLV Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
  • IEC 62341-5-3:2019 Organic light emitting diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime
  • IEC 62341-6-1:2022 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
  • IEC 62830-5:2021 Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 5: Test method for measuring generated power from flexible thermoelectric devices

Professional Standard - Agriculture, second calorimeter method

Shandong Provincial Standard of the People's Republic of China, second calorimeter method

  • DB37/T 339-2003 Method for Determination of Purity of Phthalic Anhydride - Differential Scanning Calorimetry (DSC)

German Institute for Standardization, second calorimeter method

  • DIN V 44570-60531:2008 Household electric thermal storage room heaters - Methods for measuring performance (IEC 59C/107/DC:2002)
  • DIN EN 62341-6-3:2013-02 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality (IEC 62341-6-3:2012); German version EN 62341-6-3:2012
  • DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
  • DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
  • DIN EN 50193-2-1:2017 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters; German version EN 50193-2-1:2016
  • DIN EN 60531:2001 Household electric thermal storage room heaters - Methods for measuring performance (IEC 60531:1999, modified); German version EN 60531:2000
  • DIN EN 50193-2-1:2021 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters; German version EN 50193-2-1:2016 + A1:2020
  • DIN EN 14705:2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005
  • DIN EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997
  • DIN EN 60379:2004-07 Methods for measuring the performance of electric storage water-heaters for household purposes (IEC 60379:1987, modified); German version EN 60379:2004 / Note: DIN 44532-1 (1989-06), DIN 44532-2 (1989-06), DIN 44532-3 (1989-06) and DIN 44532-100 (1989-...
  • DIN EN 14705:2005-10 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005
  • DIN EN 62341-6-2:2012-09 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance (IEC 62341-6-2:2012); German version EN 62341-6-2:2012
  • DIN 51900-3:2005 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
  • DIN EN 196-11:2019 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
  • DIN EN 196-11:2019-03 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method; German version EN 196-11:2018
  • DIN EN 62341-5-3:2014-06 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime (IEC 62341-5-3:2013); German version EN 62341-5-3:2013
  • DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
  • DIN EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purposes (IEC 60379:1987, modified); German version EN 60379:2004
  • DIN 4753-1:2019-05 Water heaters, water heating installations and storage water heaters for drinking water - Part 1: Tanks with a capacity of over 2 000 l
  • DIN 45635-14:1980 Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers)
  • DIN EN 306:1997-07 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997
  • DIN EN 50193-1:2021 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements; German version EN 50193-1:2016 + A1:2020
  • DIN 44901-2:1982 Electric water heater; thermal storage water heater, floor mounting type, capacity 200 up to 1000 litres rated input
  • DIN 44902-3:1982 Electric water heater; thermal storage water heater, wall mounting type, capacity 5 up to 150 litres rated input
  • DIN 4753-1:2011 Water heaters, water heating installations and storage water heaters for drinking water - Part 1: Tanks with a capacity of over 1000 l
  • DIN EN 62341-6-1:2011-07 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters (IEC 62341-6-1:2009); German version EN 62341-6-1:2011
  • DIN EN 60675/A1:1999 Household electric direct-acting room heaters - Methods for measuring performance (IEC 60675:1994/A1:1998); German version EN 60675:1995/A1:1998
  • DIN EN 442-2:2015-03 Radiators and convectors - Part 2: Test methods and rating; German version EN 442-2:2014

Jilin Provincial Standard of the People's Republic of China, second calorimeter method

  • DB22/T 3171-2020 Measuring method of single plate heat transfer area of plate heat exchanger

CENELEC - European Committee for Electrotechnical Standardization, second calorimeter method

  • EN 62341-6-3:2012 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality

JSAE - Society of Automotive Engineers of Japan@ Inc., second calorimeter method

  • JASO E406-1995 Heat Dissipation Test Method of Intercooler for Automobiles

AT-OVE/ON, second calorimeter method

  • OVE EN 50193-1-2021 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements (german version)

AT-ON, second calorimeter method

  • ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
  • ONORM ENV 306-1991 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance

American Society for Testing and Materials (ASTM), second calorimeter method

  • ASTM E511-07 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
  • ASTM E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
  • ASTM E598-96 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
  • ASTM E598-96(2002) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
  • ASTM E598-08(2015) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
  • ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM D4809-06 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-95 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-00(2005) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-09a Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D240-02(2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D240-92(1997)e2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM E598-08 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
  • ASTM D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

Association of German Mechanical Engineers, second calorimeter method

  • VDI 3498 Blatt 1-2002 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters
  • VDI 3498 Blatt 2-2002 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using small filters

PK-PSQCA, second calorimeter method

  • PS 1359-1975 DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETRIC BOMB METHOD AND CALCULATIONS OF NET CALORIFIC VALUE

SE-SIS, second calorimeter method

  • SIS SS 18 71 82-1990 Solid fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
  • SIS SS-ENV 306 E-1990 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance
  • SIS SS-ENV 306-1990 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance

Japanese Industrial Standards Committee (JISC), second calorimeter method

  • JIS G 1216-1:2022 Iron and steel -- Determination of nickel -- Part 1: Nickel dimethylglyoxime gravimetric method
  • JIS C 9807:1999 Methods for measuring the performance of electric storage water-heaters for household purposes
  • JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
  • JIS R 1802:2005 Methods for surface temperature measurement of far infrared heaters by thermocouples
  • JIS K 6231-2:2007 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene, butadiene, isoprene ratio

Professional Standard - Education, second calorimeter method

  • JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
  • JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry

European Committee for Standardization (CEN), second calorimeter method

  • EN 14705:2005 Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
  • EN 13384-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
  • EN 13384-2:2003 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance Incorporates Amendment A1: 2009
  • EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
  • EN 442-2:2014 Radiators and convectors - Part 2: Test methods and rating
  • EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

Group Standards of the People's Republic of China, second calorimeter method

  • T/JLHX 009-2020 Calculation and measurement method of single plate heat transfer area of plate heat exchanger
  • T/QGCML 317-2022 Micro-cantilever beam sensor detection method for micro-calorie
  • T/GDEACC 10-2019 Test method for heat dissipation of built-in condenser of household refrigerator

Henan Provincial Standard of the People's Republic of China, second calorimeter method

  • DB41/T 1516-2017 Canine distemper and canine parvovirus duplex TaqMan MGB fluorescence quantitative PCR detection method

HU-MSZT, second calorimeter method

Anhui Provincial Standard of the People's Republic of China, second calorimeter method

  • DB34/T 3373-2019 Test methods for heat transfer and fluid resistance of heat exchangers for household and similar electrical appliances

International Telecommunication Union (ITU), second calorimeter method

American National Standards Institute （ANSI), second calorimeter method

Professional Standard - Nuclear Industry, second calorimeter method

  • EJ/T 1212.11-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part11: Determination of total gas by hot vacuum extraction
  • EJ/T 1212.11-2018 Analytical methods for sintered gadolinia-uranium dioxide pellets - Part 11: Determination of total gas content by thermal vacuum extraction

NEMA - National Electrical Manufacturers Association, second calorimeter method

  • NEMA C82.16-2015 Light-Emitting Diode Drivers— Methods of Measurement Secretariat: National

KR-KS, second calorimeter method

  • KS C 7116-2008(2023) Organic light emitting diode(OLED) displays－Measuring method of image sticking
  • KS C IEC 62341-6-4-2020 Organic light emitting diode(OLED) displays —Part 6-4: Measuring methods of transparent properties
  • KS C IEC 62341-6-2-2020 Organic light emitting diode(OLED) displays — Part 6-2: Measuring methods of visual quality and ambient performance
  • KS C IEC 62341-6-1-2020 Organic light emitting diode(OLED) displays — Part 6-1: Measuring methods of optical and electro-optical parameters

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, second calorimeter method

  • GJB 5891.28-2006 Test method of loading material for initiating explosive device Part 28: Measurement of heat for combustion and explosion Method of adiabatic calorimetric
  • GJB 5891.15-2006 Test method of loading material for initiating explosive device Part 15: Compatibility test Method of microcalormetry
  • GJB 2502.8-2006 Test method for thermal control coatings of spacecraft Part 8: Thermal cycle test

CEN - European Committee for Standardization, second calorimeter method

  • EN 13384-1:2015/PRA1:2018 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
  • EN 13384-1:2000 Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance (Incorporates Amendment A1: 2005)
  • EN 196-11:2018 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
  • PREN 196-11-2017 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
  • EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
  • EN 442-2:1996 Radiators and Convectors - Part 2: Test Methods and Rating

Institute of Electrical and Electronics Engineers (IEEE), second calorimeter method

  • IEEE 351-1972 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices
  • IEEE Std 351-1972 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices

AWS - American Welding Society, second calorimeter method

  • C4.4/C4.4M-2007 Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches (Second Edition)

AASHTO - American Association of State Highway and Transportation Officials, second calorimeter method

  • T 250-1997 Standard Method of Test for Thermoplastic Traffic Line Material (Twentieth Edition)

American Petroleum Institute (API), second calorimeter method

Hebei Provincial Standard of the People's Republic of China, second calorimeter method

  • DB13/T 2499.1-2017 Methods for the determination of liquid mixtures - Part 1: Determination of the calorific value of cartridges (bomb calorimetry)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), second calorimeter method

Taiwan Provincial Standard of the People's Republic of China, second calorimeter method

  • CNS 15165-1-2008 Test methods for solar collectors - Part 1 : Thermal performance of glazed liquid heating collectors including pressure drop
  • CNS 15165-3-2008 Test methods for solar collectors - Part 3 : Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop

Professional Standard - Non-ferrous Metal, second calorimeter method

  • YS/T 1014.5-2014 Chemical analysis methods of bismuth trioxide.Part 5:Determination of moisture.Gravimetric method
  • YS/T 1014.1-2014 Methods for chemical analysis of bismuth trioxide.Part 1:Determination of bismuth trioxide content.Na<下标2>EDTA titrimetric method
  • YS/T 953.1-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 1:Determination of nikel content.Dimethylglyoxime spectrophotometric method and dimethylglyoxime gravimetric method
  • YS/T 520.1-2007 Chemical analysis of gallium.Part 1:Determination of copper content.The 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline spectrophotometric method
  • YS/T 1014.4-2014 Chemical analysis methods of bismuth trioxide.Part 5:Determination of loss cont on ignition.Gravimetric method
  • YS/T 715.1-2009 Methods for chemical analysis of selenium dioxide.Part 1:Determination of selenium dioxide content.Sodium thiosulfate titration
  • YS/T 239.6-2010 Methods for chemical analysis of antimony trisulfide- Part 6:Determination of iron content-Neighbouring phenanthroline spectrophotometric method
  • YS/T 715.5-2009 Methods for chemical analysis of selenium dioxide.Part 5:Determination of water insoluble content.Gravimetric analysis

Professional Standard - Geology, second calorimeter method

  • DZ/T 0064.14-2021 Methods for analysis of groundwater quality - Part 14: Determination of magnesium content by ethylenediaminetetraacetic acid disodium titration
  • DZ/T 0064.13-2021 Methods for analysis of groundwater quality - Part 13: Determination of calcium content by ethylenediaminetetraacetic acid disodium titration method

TR-TSE, second calorimeter method

  • TS 3361-1979 DETERMINATION OF THERMAL OUTPUT FOR RADILATORS, CONVECTORS AND SINILAR HEATERS (WITHOVT AIR FAN) (TEST METHODS USIG AIR - COOLED CLOSED BOOTH)

Professional Standard - Electron, second calorimeter method

  • SJ/Z 9094.5-1987 Methods of measurement for equipment used in terestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 4: Frequency modulators
  • SJ/Z 9094.6-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 5: Frequency demodulators
  • SJ/Z 9094.7-1987 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Setion 6:Diversity, twin-path and hot stand-by equipment
  • SJ/T 2658.7-2015 Measuring method for semiconductor infrared-emitting diode.Part 7: Radiant flux

未注明发布机构, second calorimeter method

  • BS ISO 18373-2:2008(2011) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2 : Measurement of the enthalpy of fusion of crystallites

American Society of Quality Control （ASQC), second calorimeter method

国家药监局, second calorimeter method

  • YY/T 1639-2018 Method for determination of diphenylmethane diisocyanate (MDI) residues in disposable polyurethane infusion equipment

Professional Standard - Light Industry, second calorimeter method

  • QB/T 1927.5-1993 Calculation method of energy balance and thermal efficiency of continuous digester

Standard Association of Australia （SAA）, second calorimeter method

  • IEC 60675:1994+AMD1:1998 CSV Household electric direct-acting room heaters — Methods for measuring performance
  • AS 1359.102.2:1997 Rotating electrical machines - General requirements - Methods for determining losses and efficiency - Calorimetric method

Military Standard of the People's Republic of China-General Armament Department, second calorimeter method

  • GJB 2165-1994 Method for determining absorbed dose of electronic devices using thermoluminescence dosimetry system
  • GJB 2502.8-2015 Test methods for spacecraft thermal control coatings Part 8: Thermal cycle testing

US-CLSI, second calorimeter method

  • CLSI MM06-A2-2010 Quantitative Molecular Methods for Infectious Diseases; Approved Guideline- Second Edition

GOSTR, second calorimeter method

  • GOST IEC 62341-6-1-2016 Organic light emitting diode (OLED) displays. Part 6-1. Measuring methods of optical and electro-optical parameters

NO-SN, second calorimeter method

  • NS 3058-4-1994 Enclosed wood heaters. Smoke emission. Part 4: Determination of the content of carbon monoxide (CO) and carbon dioxide (CO2) in the flue gas

IT-UNI, second calorimeter method

  second calorimeter method, Calorimeter method, Calorimeter Calculation, Second Refrigerant Heater Method, second method, 2nd Refrigerant Heater.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved