Optical power

Optical power, Total:500 items.

In the international standard classification, Optical power involves: Optics and optical measurements, Construction industry, Special measuring equipment for use in telecommunications, Fibre optic communications, Electrical engineering in general, Optoelectronics. Laser equipment, Valves, Acoustics and acoustic measurements, Rotating machinery, Optical equipment, Lamps and related equipment, Solar energy engineering, Electronic components in general, Organic chemicals, Products of the chemical industry, Construction materials, Machine tools, Chipless working equipment, Geology. Meteorology. Hydrology, Applications of information technology, Electrical and electronic testing, Elements of buildings, Electrical accessories, Electrical wires and cables, (No title), Quality, Shipbuilding and marine structures in general, Glass, Integrated circuits. Microelectronics, Power transmission and distribution networks, Fishing and fish breeding, Aerospace engines and propulsion systems, Continuous handling equipment, Document imaging applications, Resistors, Aerospace electric equipment and systems, On-board equipment and instruments, Non-destructive testing, Metrology and measurement in general, Analytical chemistry, Linear and angular measurements.

National Metrological Verification Regulations of the People's Republic of China, Optical power

JJG 813-2013 Fiber Optical Power Meters
JJG 249-2004 0.1mW～200W Laser Power Meters
JJG 813-1993 Verification Regulation of Optical Fiber Power Meter
JJG 249-2023 01 mW~200 W laser power meter
JJG(邮电) 033-1995 Verification Regulations for Micro Optical Power Meter
JJG 965-2001 Verification Regulation of Optical Power Meter in Telecommunication
JJG 965-2013 Verification Regulation of Optical Power Meters in Telecommunication
JJG(电子) 10001-1988 Trial Verification Regulations for Laser Power Meter
JJG 2078-1990 Verification Scheme of Measuring Instruments for Laser Power
JJG 293-1982 Verification Regulation of Medium Level Laser Power Meter
JJG 249-1981 Verification Regulation of Laser Power Meter in Low Range
JJG 248-1981 Verification Regulation of Working Standard of Laser Power Meter in Low Range

Taiwan Provincial Standard of the People's Republic of China, Optical power

CNS 14338-1999 Optical power meter
CNS 12363-1988 Method of Test for Fiber Optic Devices ( FOTP-95 Optical Fibers and Cable Absolute Optical Power Test)

Group Standards of the People's Republic of China, Optical power

T/SHDSGY 102-2022 High power fiber grating
T/CASME 361-2023 High power polarization beam splitter
T/COEMA 20O-2024 High power infrared laser collimator lenses
T/CEC 255-2019 Technical specification for active power automatic control of photovoltaic power generation
T/JSIES 001-2021 Light radiation protection requirements of high powerlaser cutting equipment
T/QGCML 2041-2023 878 nm high power semiconductor laser chip
T/GSEA 002-2019 Technical Specifications for Power Degradation Test of Photovoltaic Modules
T/CITS 0103-2024 Technical requirements for power attenuation inspection of photovoltaic modules
T/CASMES 42-2022 Prefabricated glass capillary bars for optical power distributors
T/CSTM 00537-2021 Phase transition temperature measurement of micro-nano thin film -Optical power analysis
T/CSEE 0170-2020 Technical Specifications for Fast Power Control Devices for Photovoltaic Power Stations
T/CASMES 278-2023 Technical requirements for power attenuation testing of perovskite photovoltaic modules

HU-MSZT, Optical power

MSZ 515-1985 Rotating electrical machines rated power, voltage and frequency
MSZ 448/13.lap-1964 Rotating electrical machines rated power, voltage and frequency
MSZ 1177-1958 Hose design, 250W optical power

AENOR, Optical power

UNE 34195:1984 SUGARS. DETERMINATION OF THE ROTATORY POWER (POLARISATION).
UNE-EN 61683:2001 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency.
UNE 20546-4:1981 SINGLE-TURN ROTARY POWER POTENTIOMETERS. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS

Military Standard of the People's Republic of China-General Armament Department, Optical power

GJB 1658-1993 General specifications for power type rotary switches
GJB 10253-2021 High Power Fiber Laser Specifications
GJB 9245-2017 High Peak Power Laser Optics Terminology
GJB 8873-2016 High peak power laser device terminology
GJB/J 3352-1998 Calibration procedures for pulsed laser peak power meters
GJB 8546-2015 High peak power, high energy laser parameter terminology
GJB 9385-2018 High-energy laser output power time characteristics test method
GJB 8361-2015 Parameter testing method of military laser power energy testing instrument

International Electrotechnical Commission (IEC), Optical power

IEC 61315:1995 Calibration of fibre optic power meters
IEC 61315:2019 Calibration of fibre-optic power meters
IEC 61315:2019 RLV Calibration of fibre-optic power meters
IEC 61315:2005 Calibration of fibre optic power meters
IEC 61290-1-3:2021 RLV Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-1-3:2005 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for power parameters - Optical power meter
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
IEC 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance
IEC 61683:1999 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
IEC TR 62048:2011 Optical fibres - Reliability - Power law theory
IEC TR 62048:2002 Optical fibres - Reliability - Power law theory
IEC TR 62048:2014 Optical fibres - Reliability - Power law theory
IEC 60072-3:1994 Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50
IEC 62891:2020 Maximum power point tracking efficiency of grid connected photovoltaic inverters
IEC TR 62627-08:2016 Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC TS 63106-2:2022 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 2: DC power simulators
IEC TS 63106-1:2020 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 1: AC power simulators
IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-3-3:2013 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Optical power and gain parameters
IEC 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
IEC 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
IEC 60393-4:2023 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers
IEC 60393-4:1992 Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotary power potentiometers
IEC TS 63156:2021 Photovoltaic systems - Power conversion equipment performance - Energy evaluation method
IEC 61290-1:2022 Optical amplifiers - Test methods - Part 1: Power and gain parameters
IEC 61290-1:2022 RLV Optical amplifiers - Test methods - Part 1: Power and gain parameters
IEC 62093:2022 Photovoltaic system power conversion equipment - Design qualification and type approval
IEC TS 63157:2019 Photovoltaic systems - Guidelines for effective quality assurance of power conversion equipment
IEC 60072-2:1990 Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-1:1991 Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080

RO-ASRO, Optical power

STAS 7627-1982 SCREW CONVEYORS Calculation of installed power
STAS SR ISO 7119:1995 Continuous mechanical handling equipment for loose bulk materials - Screw conveyors - Design rules for drive power

British Standards Institution (BSI), Optical power

BS EN IEC 61290-1-3:2021 Optical amplifiers. Test methods - Power and gain parameters. Optical power meter method
BS EN 61315:2006 Calibration of fibre-optic power meters
BS EN 61290-1-3:2005 Optical amplifiers — Test methods — Part 1-3: Power and gain parameters — Optical power meter method
BS EN 61290-1-3:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
BS EN 61290-1-3:2006 Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
BS EN IEC 61315:2019 Calibration of fibre-optic power meters
BS EN 61290-3-3:2014 Optical amplifiers. Test methods. Noise figure parameters. Signal power to total ASE power ratio
PD IEC TR 61292-8:2019 Optical amplifiers. High-power amplifiers
BS PD IEC/TR 62048:2014 Optical fibres. Reliability. Power law theory
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control
BS IEC 62891:2020 Maximum power point tracking efficiency of grid connected photovoltaic inverters
PD IEC/TR 62627-08:2016 Fibre optic interconnecting devices and passive components. Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
20/30410203 DC BS EN IEC 61290-1-3. Optical amplifiers. Test methods. Part 1-3. Power and gain parameters. Optical power meter method
BS PD IEC/TR 62627-08:2016 Fibre optic interconnecting devices and passive components. Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
BS 7036-4:1996 Code of practice for safety at powered doors for pedestrian use - Low energy swing doors
BS EN 62670-3:2017 Photovoltaic concentrators (CPV). Performance testing. Performance measurements and power rating
BS EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating. Irradiance and temperature performance measurements and power rating
BS EN IEC 61290-1:2022 Optical amplifiers. Test methods. Power and gain parameters
BS EN 61290-1:2015 Optical amplifiers. Test methods. Power and gain parameters
BS EN IEC 61290-1-1:2020 Optical amplifiers. Test methods - Power and gain parameters. Optical spectrum analyzer method
BS EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
BS EN ISO 13694:2015 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN IEC 60393-4:2023 Potentiometers for use in electronic equipment. Sectional specification. Single-turn rotary power potentiometers
BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN 61290-7-1:2007 Optical amplifiers - Test methods - Out-of-band insertion losses - Filtered optical power meter method
BS PD IEC TS 63156:2021 Photovoltaic systems. Power conversion equipment performance. Energy evaluation method
BS EN ISO 11554:2017 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:2009 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 13694:2018 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN 2591-603:2002 Elements of electrical and optical connection - Test methods - Optical elements - Change of power distribution
BS EN ISO 11254-3:2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Assurance of laser power (energy) handling capabilities
BS EN ISO 11554:2017(2020) Optics and photonics — Lasers and laser - related equipment — Test methods for laser beam power, energy and temporal characteristics
BS EN IEC 60869-1:2018 Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices. Generic specification
PD IEC/TR 60825-17:2015 Safety of laser products. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems

CENELEC - European Committee for Electrotechnical Standardization, Optical power

EN 61315:1997 Calibration of Fibre Optic Power Meters
EN 61290-2-3:1998 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter
EN 61290-1-3:2005 Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method
EN 60034-1:1998 Rotating Electrical Machines Part 1: Rating and Performance (Incorporates Amendment A1: 1998)
EN 60034-1:2004 Rotating electrical machines Part 1: Rating and performance
EN 60034-1:1995 Rotating Electrical Machines - Part 1: Rating and Performance (Incorporates Amendment A1: 1996; Incorporating Corrigendum April 1995)
EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 60034-1:2010/AC:2010 Rotating electrical machines Part 1: Rating and performance
EN 61290-2-1:1998 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer

Korean Agency for Technology and Standards (KATS), Optical power

KS C 6928-1995 Test methods of optical power meters for optical fiber
KS C 6928-2020 Test methods of optical power meters for optical fiber
KS C IEC 61315:2020 Calibration of fiber-optic power meters
KS C IEC 61315:2014 Calibration of fiber-optic power meters
KS C 6706-2002 TEST METHODS OF OPTICAL POWER METERS FOR LASER BEAM
KS C 6928-1995(2020) Test methods of optical power meters for optical fiber
KS C IEC 61315:2009 Calibration of fiber-optic power meters
KS C 6706-1993(1998) TEST METHODS OF OPTICAL POWER METERS FOR LASER BEAM
KS C 8533-1995 Measuring procedure of power conditioner efficiency for photovoltaic systems
KS C IEC 61683:2005 Photovoltaic systems－Power conditioners－Procedure for measuring efficiency
KS C 8533-2002(2018) Measuring procedure of power conditioner efficiencyfor photovoltaic systems
KS C IEC 61683-2005(2020) Photovoltaic systems－Power conditioners－Procedure for measuring efficiency
KS C IEC 61683-2020 Photovoltaic systems－Power conditioners－Procedure for measuring efficiency
KS C 6705-2002 MEASURING METHODS FOR LASER OUTPUT POWER
KS C IEC 60072-3:2005 Dimensions and output series for rotating electrical machines－Part 3：Small built-in motors－Flange numbers BF10 to BF50
KS C 8533-2023 Measuring procedure of power conditioner efficiencyfor photovoltaic systems
KS C 8533-2002 Measuring procedure of power conditioner efficiencyfor photovoltaic systems
KS C IEC 61173:2002 Overvoltage protection for photovoltaic(PV) power generating systems-Guide
KS C IEC 61173:2015 Overvoltage protection for photovoltaic(PV) power generating systems-Guide
KS C IEC 61277:2002 Terrestrial photovoltaic (PV) power generating systems－General and guide
KS C 6822-2013 Optical fiber amplifiers-Test methods- Part 2 : Test methods for optical power parameters
KS C 8540-2005(2020) Testing procedure of power conditioner forsmall photovoltaic power generating systems
KS C 8540-2020 Testing procedure of power conditioner forsmall photovoltaic power generating systems
KS B ISO 11554:2013 Optics and optical instruments ?; Laser and laser-related equipment ?; Test methods for laser beam power, energy and temporal characteristics
KS B ISO 11554:2003 Optics and optical instruments-Lasers and laser-related equipment-Test methods for laser beam power, energy and temporal characteristics
KS B ISO 11554:2015 Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
KS B ISO 13694-2015(2020) Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS C 5393-4-2001(2016) Potentiometers for use in electronic equipment－Part 4：Sectional specification：Single－turn rotary power potentiometers
KS C 5393-4-2001(2021) Potentiometers for use in electronic equipment－Part 4：Sectional specification：Single－turn rotary power potentiometers
KS C 5393-4-2021 Potentiometers for use in electronic equipment－Part 4：Sectional specification：Single－turn rotary power potentiometers
KS B ISO 11554-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
KS B ISO 13694-2020 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS B ISO 11554-2020 Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
KS C 8540-2005 Testing procedure of power conditioner forsmall photovoltaic power generating systems
KS C 6108-2013 Power and energy measuring detectors Instruments and equipment for laser radiation
KS C 6822-2000(2010) Optical fiber amplifiers-Test methods- Part 2 : Test methods for optical power parameters
KS C IEC 60072-2:2005 Dimensions and output series for rotating electrical machines－Part 2：Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360

German Institute for Standardization, Optical power

DIN 42961:1980 Rating plates for rotating electrical machinery; design
DIN EN IEC 61315:2020-07 Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019 / Note: DIN EN 61315 (2006-09) remains valid alongside this standard until 2022-05-03.
DIN EN 61290-1-3:2015-12 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2015); German version EN 61290-1-3:2015 / Note: DIN EN 61290-1-3 (2006-07) remains valid alongside this standard until 2018-03-31.*Appli...
DIN EN 61683:2000 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
DIN EN 61683:2000-08 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
DIN EN 61290-1-3:2006 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2005); German version EN 61290-1-3:2005
DIN EN IEC 61290-1-3:2021-04 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 86C/1645/CD:2020); Text in German and English / Note: Date of issue 2021-03-05*Intended as replacement for DIN EN 61290-1-3 (2015-12).
DIN EN IEC 61290-4-3:2019-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2018); German version EN IEC 61290-4-3:2018 / Note: DIN EN 61290-4-3 (2016-06) remains valid alongside t...
DIN EN 61173:1996 Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994
DIN EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2015); German version EN 61290-1-3:2015
DIN EN 61290-3-3:2014-11 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio (IEC 61290-3-3:2013); German version EN 61290-3-3:2014
DIN EN 61315:2006 Calibration of fibre-optic power meters (IEC 61315:2005); German version EN 61315:2006
DIN EN IEC 60393-4:2022-11 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers (IEC 40/2919/CD:2022); Text in German and English / Note: Date of issue 2022-10-14
DIN EN ISO 13694:2019-06 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018); German version EN ISO 13694:2018
DIN EN 61290-1:2015-11 Optical amplifiers - Test methods - Part 1: Power and gain parameters (IEC 61290-1:2014); German version EN 61290-1:2015 / Note: To be replaced by DIN EN IEC 61290-1 (2023-02).
DIN EN IEC 61290-1:2023-02 Optical amplifiers - Test methods - Part 1: Power and gain parameters (IEC 86C/1746/CDV:2021); German and English version prEN IEC 61290-1:2021 / Note: Date of issue 2023-01-27*Intended as replacement for DIN EN 61290-1 (2015-11).
DIN EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006);English version of DIN EN ISO 11554:2008-11
DIN EN ISO 13694:2019 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Optical power

GB/T 13863-2011 Test methods for laser radiation power and its instability
GB/T 15515-1995 Specifications of optical power meter
GB/T 15515-2008 Specifications of optical power meter
GB/T 42219-2022 Optical measurement of high-power LED
GB/T 13863-1992 Testing method for laser radiant power
GB/T 20514-2006 Photovoltaic systems Power conditioners Procedure for measuring efficiency
GB/T 6360-1995 Specification for laser radiation power and energy measuring equipment
GB/T 11153-2012 Test methods of laser power meter in loveer-range
GB/T 4772.3-1999 Dimensions and output series for rotating electrical machines. Part 3: Samll built-in motors Flange numbers BF10 to BF50
GB/T 13864-1992 Testing method for laser radiant power stability
GB/T 24664-2009 Evaluation and measurement method for beam quality of high power laser system for industry manufacturing
GB/T 36356-2018 Technical specification for power light-emitting diode chips
GB/T 41643-2022 Guidance and safety requirements for high power laser manufacturing equipments
GB/T 36359-2018 Semiconductor optoelectronic devices.Blank detail specification for lower power light-emitting diodes
GB/T 36360-2018 Semiconductor optoelectronic devices.Blank detail specification for middle power light-emitting diodes
GB/T 36357-2018 Technical specification for middle power light-emitting diode chips
GB/T 17025-1997 Potentiometers for use in electronic equipment. Part 4: Sectional specification. Single-turn rotary power potentiometers
GB/T 28511.1-2012 Integrated optical path devices based on planar lightwave circuit.Part 1:Optical power splitter based on PLC technology

Association Francaise de Normalisation, Optical power

NF C93-803*NF EN 61315:2006 Calibration of fibre-optic power meters
NF C93-803:1997 Calibration of fibre optic power meters.
NF EN 61290-2-3:1998 Optical fiber amplifiers - Basic specification - Part 2-3: test methods for optical power parameters. Optical power meter
NF C93-805-1-3*NF EN 61290-1-3:2016 Optical amplifiers - Test methods - Part 1-3 : power and gain parameters - Optical power meter method
NF EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: power and gain parameters - Optical power measuring device method
NF C93-805-1-3:2006 Optical amplifier - Test methods - Part 1-3 : power and gain parameters - Optical power meter method.
NF C93-805-1-3*NF EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3 : power and gain parameters - Optical power meter method
NF EN IEC 61315:2019 Calibration of power meters for fiber optic devices
NF EN 61683:2000 Photovoltaic systems - Power conditioners - Performance measurement procedure
NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: transient power parameters - Single-channel optical amplifiers controlled by output power
NF M82-200:1954 MINING EQUIPMENT. ROTARY AIR-ENGINES. POWER RATINGS.
NF C93-805-4-3*NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3 : power transient parameters - Single channel optical amplifiers in output power control
NF C57-331:1995 Overvoltage protection for photovoltaic (pv) power generating systems. Guide.
NF C93-805-3-3*NF EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3 : noise figure parameters - Signal power to total ASE power ratio
NF EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: noise figure parameters - Signal power to total ESA power ratio
NF ISO 11527:2019 Buildings and civil engineering works - Sealants - Test method for determining the rolling power
NF ISO 7119:2014 Continuous handling machines for bulk products - Screw conveyors - rules for calculating the drive power
NF C57-113-1*NF EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1 : irradiance and temperature performance measurements and power rating
NF EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance test - Part 3: performance measurements and power ratio
NF S10-124*NF EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
NF EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Laser beam power (energy) density distribution test methods
NF C57-370-3*NF EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: performance measurements and power rating
NF C51-200:1964 Rotating electrical machinery. Electrical machines rated up to 600 voltamperes or 600 watts. Requirements.
NF S10-121:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
NF S10-121:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
NF S10-121*NF EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment- Test methods for laser beam power, energy and temporal characteristics
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF C57-337*NF EN IEC 62093:2022 Photovoltaic system power conversion equipment - Design qualification and type approval
NF C93-805-1*NF EN 61290-1:2015 Optical amplifiers - Test Methods - Part 1 : power and gain parameters
NF EN IEC 61290-1:2022 Optical amplifiers - Test methods - Part 1: Power and gain parameters
NF C83-253:1983 Harmonized system of quality assessment for electronic components. Sectional specification. Low power single turn. Rotary potentiometers.

ZA-SANS, Optical power

SANS 61315:2006 Calibration of fibre-optic power meters
SANS 1470-3:2008 Sound power labelling Part 3: Rotating electrical machinery
SANS 1470-3:1997 Sound power labelling Part 3: Rotating electrical machinery
SANS 60072-3:1994 Dimensions and output series for rotating electrical machines Part 3: Small built-in motors - Flange numbers BF10 to BF50

Danish Standards Foundation, Optical power

DS/EN 61315:2006 Calibration of fibre-optic power meters
DS/EN 61290-1-3:2006 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
DS/EN IEC 61290-1-3:2021 Optical amplifiers – Test methods – Part 1-3: Power and gain parameters – Optical power meter method
DS/EN 61683:2001 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
DS/EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
DS/EN 61040:1994 Power and energy measuring detectors, instruments and equipment for laser radiation

European Committee for Electrotechnical Standardization（CENELEC）, Optical power

EN IEC 61315:2019 Calibration of fibre-optic power meters
EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
EN 60034-1:2010 Rotating electrical machines Part 1: Rating and performance
EN 61315:2006 Calibration of Fibre Optic Power Meters
EN 61683:2000 Photovoltaic Systems - Power Conditioners - Procedure for Measuring Efficiency
EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
EN IEC 60393-4:2023 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers
EN 61040:1992 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation
EN IEC 61290-1:2022 Optical amplifiers - Test methods - Part 1: Power and gain parameters
EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters

Japanese Industrial Standards Committee (JISC), Optical power

JIS C 6186:1999 Calibration of fiber optic power meters
JIS C 6186:2008 Calibration of fiber optic power meters
JIS C 6186:2020 Calibration of fiber optic power meters
JIS C 6122-1-3:2011 Optical amplifiers -- Test methods -- Part 1-3: Power and gain parameters -- Optical power meter method
JIS C 8961:1993 Measuring procedure of power conditioner efficiency for photovoltaic systems
JIS C 8961:2008 Measuring procedure of power conditioner efficiency for photovoltaic systems
JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control
JIS C 6122-3-3:2016 Optical amplifiers -- Test methods -- Part 3-3: Noise figure parameters -- Signal power to total ASE power ratio
JIS C 8980:1997 Power conditioner for small photovoltaic power generating system
JIS C 8980:2009 Power conditioner for small photovoltaic power generating system
JIS C 5920-1:2015 Fiber optic passive power control devices -- Part 1: Generic specification

KR-KS, Optical power

KS C IEC 61315-2020 Calibration of fiber-optic power meters
KS P 2182-2022 Low power laser acupuncture device
KS C 8533-2002(2023) Measuring procedure of power conditioner efficiencyfor photovoltaic systems

ES-UNE, Optical power

UNE-EN IEC 61315:2019 Calibration of fibre-optic power meters (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (Endorsed by AENOR in August of 2015.)
UNE-EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio (Endorsed by AENOR in March of 2014.)
UNE-EN 62670-3:2018 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
UNE-EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2018) (Endorsed by Asociación Española de Normalización in February of 2019.)
UNE-EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN IEC 61290-1:2022 Optical amplifiers - Test methods - Part 1: Power and gain parameters (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters (Endorsed by AENOR in March of 2015.)

GSO, Optical power

GSO IEC 61315:2015 Calibration of fibre-optic power meters
OS GSO IEC 61315:2015 Calibration of fibre-optic power meters
BH GSO IEC 61315:2016 Calibration of fibre-optic power meters
OS GSO IEC 61290-1-3:2014 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
GSO IEC 61290-1-3:2014 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
GSO IEC 62891:2022 Maximum power point tracking efficiency of grid connected photovoltaic inverters
GSO IEC 61290-4-3:2021 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
BH GSO IEC 61290-4-3:2022 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
GSO IEC 61290-3-3:2021 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
BH GSO IEC 62670-3:2022 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
GSO IEC 62670-3:2021 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
GSO IEC 60393-4:2015 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers
OS GSO IEC 60393-4:2015 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers
GSO IEC TS 63156:2023 Photovoltaic systems - Power conversion equipment performance - Energy evaluation method
BH GSO IEC TS 63156:2023 Photovoltaic systems - Power conversion equipment performance - Energy evaluation method
OS GSO ISO 11554:2011 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
GSO IEC 61290-1:2021 Optical amplifiers - Test methods - Part 1: Power and gain parameters
BH GSO IEC 61290-1:2022 Optical amplifiers - Test methods - Part 1: Power and gain parameters

SCC, Optical power

CEI EN 61315:2007 Calibration of fibre-optic power meters
DANSK DS/EN 61315:2006 Calibration of fibre-optic power meters
DANSK DS/EN IEC 61315:2019 Calibration of fibre-optic power meters
CEI EN IEC 61315:2019 Calibration of fibre-optic power meters
BS EN 61315:1997 Calibration of fibre optic power meters
CEI EN 61290-2-3:1999 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter
CIE 225:2017 Optical Measurement of High-Power LEDs
CSA F381-M1985-1985 Photovoltaic Power Conditioning Subsystems
CEI EN IEC 61290-1-3:2021 Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method
CEI EN 61290-1-3:2015 Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method
DANSK DS/EN 61290-1-3:2015 Optical amplifiers – Test methods – Part 1-3: Power and gain parameters – Optical power meter method
DANSK DS/EN IEC 61290-1-3:2021 Optical amplifiers – Test methods – Part 1-3: Power and gain parameters – Optical power meter method
BS PD IEC TR 61292-8:2019 Optical amplifiers-High-power amplifiers
BS EN 61290-1-3:1998 Optical fibre amplifiers. Basic spectrum analyzers-Optical power meter
AS 1359.30:1987 Rotating electrical machines - General requirements - Duty and rating
DANSK DS/IEC 62891:2020 Maximum power point tracking efficiency of grid connected photovoltaic inverters
DIN EN 61290-1-3 E:2014 Draft Document - Optical amplifiers - Test methods - Part 1-3: Optical power and gain parameters - Optical power meter method (IEC 86C/1216/CD:2013)
DIN EN IEC 61290-1-3:2023 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2021); German version EN IEC 61290-1-3:2021
JIS C 8980:2020 Power conditioner for small photovoltaic power generating system
CEI EN IEC 61290-4-3:2019 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DANSK DS/EN 61290-4-3:2015 Optical amplifiers – Test methods – Part 4-3: Power transient parameters – Single channel optical amplifiers in output power control
CEI EN 61290-4-3:2016 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DANSK DS/EN IEC 61290-4-3:2018 Optical amplifiers — Test methods — Part 4-3: Power transient parameters — Single channel optical amplifiers in output power control
DANSK DS/IEC TR 61292-8:2019 Optical amplifiers – Part 8: High-power amplifiers
DANSK DS/IEC TR 62627-08:2016 Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
DIN EN 61315 E:2017 Draft Document - Calibration of fibre-optic power meters (IEC 86/492/CD:2016)
BS EN 61290-2-1:1998 Optical fibre amplifiers. Basic specification-Test methods for optical power parameters. Optical spectrum analyzer
CEI EN 61290-3-3:2014 Optical amplifiers - Test methods Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
DANSK DS/EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
DIN EN 61290-4-3 E:2017 Draft Document - Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 86C/1462/CDV:2017); German version prEN 61290-4-3:2017
DIN EN IEC 61290-1-3 E:2021 Draft Document - Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 86C/1645/CD:2020); Text in German and English
AENOR UNE-EN 62670-3:2018 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
DANSK DS/EN 62670-3:2017 Photovoltaic concentrators (CPV) – Performance testing – Part 3: Performance measurements and power rating
CEI EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing Part 3: Performance measurements and power rating
VDI/VDE 2649-2011 Rotating tools for screw threaded joints — Instructions for comparative performance measurement of hydraulic impulse wrenches
DANSK DS/EN IEC 60393-4:2023 Potentiometers for use in electronic equipment – Part 4: Sectional specification: Single-turn rotary power potentiometers
CIE 206:2014 The Effect of Spectral Power Distribution on Lighting for Urban and Pedestrian Areas
DANSK DS/IEC TS 63156:2021 Photovoltaic systems – Power conversion equipment performance – Energy evaluation method
12/30260284 DC BS EN 61290-3-3. Optical amplifiers. Test methods. Part 3-3. Noise figure parameters. Signal power to total ASE power ratio
BS EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification-Test methods for optical power parameters. Electrical spectrum analyzer
AS 1360.11:1977 Rotating electrical machines of particular types or for particular applications - Dimensions and performance of small power electrical machines
BS EN ISO 11554:2006 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 13694:2000 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
DANSK DS/EN 61290-1:2015 Optical amplifiers – Test methods – Part 1: Power and gain parameters
CEI EN IEC 62093:2022 Photovoltaic system power conversion equipment - Design qualification and type approval
DANSK DS/EN IEC 61290-1:2022 Optical amplifiers – Test methods – Part 1: Power and gain parameters
CEI EN IEC 61290-1:2023 Optical amplifiers - Test methods Part 1: Power and gain parameters
BS EN 61290-7-1:1998 Optical fibre amplifiers. Basic specification-Test methods for out-of-band insertion losses. Filtered optical power meter
BS EN ISO 11554:2003 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:1999 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS PD IEC TR 61292-4:2023 Optical amplifiers-Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
BS PD IEC/TR 60825-17:2010 Safety of laser products-Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
DIN EN 61290-3-3 E:2012 Draft Document - Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio (IEC 86C/1058/CD:2012)

Defense Logistics Agency, Optical power

DLA QPL-6807-15-2006 SWITCH, ROTARY, SELECTOR POWER GENERAL SPECIFICATION FOR
DLA SMD-5962-03247 REV C-2012 MICROCIRCUIT, HYBRID, LINEAR, POWER MOSFET, DUAL CHANNEL, OPTOCOUPLER
DLA SMD-5962-93140 REV J-2005 MICROCIRCUIT, HYBRID, LINEAR, POWER MOSFET, SINGLE CHANNEL, OPTOCOUPLER

RU-GOST R, Optical power

GOST 25786-1983 Lasers. Measuring methods of average power, pulse average power, relative average power instability
GOST 18995.3-1973 Organic chemical products. Method for determination of specific rotation quantity
GOST R IEC 61683-2013 Photovoltaic systems. Power conditioners. Procedure for measuring efficiency
GOST 25819-1983 Lasers. Methods of pulse laser radiation peak power measurement
GOST 4.330-1985 System of product-quality indices. Low-power rotating electrical machines. Nomenclature of indices
GOST R 51060-1997 Instruments for measurement of optical average power of fibre optics transmission systems. General technical requirements
GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
GOST 22091.6-1984 X-ray devices. Methods of measuring X-radiation exposure dose power and X-radiation exposure dose per pulse
GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
GOST R 59741-2021 Optics and photonics. Lasers and laser-related equipment. Test methods for laser radiation power, energy and temporal characteristics
GOST R 51689-2000 Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements
GOST 14191-1988 Low-power rotating electrical machines. Motors for tape-recorders and electrorecord-playing equipment for domestic use. General specifications
GOST 31606-2012 Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements
GOST 25917-1983 Lasers. Methods for measurement of relative distribution of radiant energy (power)

TIA - Telecommunications Industry Association, Optical power

TIA-455-95-B-2019 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
EIA-455-95-1986 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
TIA/EIA-455-95A-2000 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
TSB-143-2007 Fiber Optic Power Meters: Measurement and Application Issues
EIA/TIA-455-170-1989 FOTP-170 Cable Cutoff Wavelength of Single-Mode Fiber by Transmitted Power
TIA/EIA-526-7-1998 OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant
EIA/TIA-526-14-1990 OFSTP-14 Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant
TIA/EIA-455-203-2001 FOTP-203 Launched Power Distribution Measurement Procedure for Graded-Index Multimode Fiber Transmitters
TIA/EIA-526-11-1991 OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment

American National Standards Institute （ANSI), Optical power

ANSI/TIA-455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA/EIA 455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/AGMA 6015-2013 Power Rating of Single and Double Helical Gearing for Rolling Mill Service
ANSI/TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
ANSI/TIA-455-231-2003 IEC 61315 - Calibration of Fibre-Optic Power Meters
ANSI/TIA/EIA 455-211-2000 FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer
ANSI/TIA-455-211-2000 FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer
ANSI/AGMA 6115-2013 Power Rating of Single and Double Helical Gearing for Rolling Mill Service- Metric Edition
ANSI/EIA 526-2:1989 OFSTP-2, Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable
ANSI/TIA/EIA 455-80-C-2003 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power

未注明发布机构, Optical power

ANSI/TIA-455-95-B-2019 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA/EIA-455-95-A-2000(2005) FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
DIN EN 61315 E:2017-01 Calibration of fibre-optic power meters
DIN EN 61290-1-3:1999 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
DIN EN 61290-1-3 E:2014-09 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
DIN EN IEC 61290-1-3 E:2021-04 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
DIN EN 61290-4-3 E:2013-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN 61290-4-3 E:2017-11 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN 61290-3-3 E:2012-06 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio

Fujian Provincial Standard of the People's Republic of China, Optical power

DB35/T 1209-2011 High Power Self Ballasted Fluorescent Lamps
DB35/T 1176-2011 Power LEDs for road lighting
DB35/T 1119-2011 Small and medium power green and blue solid-state laser crystal components

Professional Standard - Electron, Optical power

SJ 20468-1994 Low-power rotating joint of Aluminum waveguide Type BGJ-100-3/4
SJ 20467-1994 High-power rotating joint of Aluminum waveguide Type BGJ-100-1/2
SJ/T 11869-2022 Detailed specifications for silicon substrate white light power light emitting diode chips
SJ/T 11868-2022 Detailed specifications for silicon substrate blue power light emitting diode chips
SJ 1875-1981 Methods of measurement for output power of gas laser devices
SJ/T 11867-2022 Detailed specifications for silicon substrate blue light low-power light-emitting diode chips
SJ 3250-1989 Methods of measurement for chromium concentration in semi-insulation Gallium arsenide by infra-red absorption
SJ/T 11398-2009 Technical specification for power light-emitting diode chips
SJ/T 11866-2022 Semiconductor optoelectronic devices - Detailed specifications for silicon substrate white light power light emitting diodes
SJ/T 11393-2009 Semiconductor optoelectronic devices-Blank detail specification for power light-emitting diodes
SJ/T 11400-2009 Semiconductor optoeletronic devices-Blank detail specification for lower-power light-emitting diodes
SJ 1876-1981 Methods of measurement for stability of output power for gas laser devices
SJ 20957-2006 General specification for large power semiconductor laser diode array
SJ 2658.6-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power
SJ 2354.9-1983 Method of measurement for noise equivalent power of PIN and avalanche photodiodes

CN-QIYE, Optical power

Q/GDW 1995-2013 Photovoltaic Power Generation Power Forecasting System Functional Specification
Q/GDW 1998-2013 Technical Requirements for Power Prediction System of Photovoltaic Power Station
Q/GDW 1996-2013 Technical specifications for meteorological element monitoring of photovoltaic power generation prediction

国家能源局, Optical power

NB/T 32031-2016 Photovoltaic power generation prediction system functional specifications
NB/T 42143-2018 Photovoltaic module power optimizer technical specifications
NB/T 10186-2019 Technical specifications for power conversion equipment for optical storage systems

Indonesia Standards, Optical power

SNI 04-3864-1995 Dimension and rated output of rotating electrical machinery with mounting flange, frame numbers 355 to 1000

工业和信息化部, Optical power

YD/T 3540-2019 Integrated Optical Power Detector (IPM)

Professional Standard - Post and Telecommunication, Optical power

YD/T 1068-2000 Technical requirements for portable optical power meter
YD/T 2000.1-2014 Integrated optical path devices based on planar lightwave circuit.Part 1: Optical power splitter based on PLC technology
YD/T 2000.1-2009 Integrated optical path devices based on planar lightwave circuit.Part 1:Optical power splitter based on PLC technology
YD/T 2006-2009 Technical requirements and test methods of VMUX
YD/T 2006-2023 Technical requirements and test methods for optical channel power adjustable combiners
YD/T 629.1-1993 Monitoring method of attenuation changes in optical fiber transmission Transmission power monitoring method

Lithuanian Standards Office , Optical power

LST EN 61315-2006 Calibration of fibre-optic power meters (IEC 61315:2005)
LST EN 61290-1-3-2006 Optical amplifiers. Test methods. Part 1-3: Power and gain parameters. Optical power meter method (IEC 61290-1-3:2005)
LST EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2021)
LST EN 61683-2002 Photovoltaic systems. Power conditioners. Procedure for measuring efficiency (IEC 61683:1999)

(U.S.) Telecommunications Industries Association , Optical power

TIA/EIA-455-211-2000 FOTP-211 IEC 61290-2-3 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter
TIA-455-231-2003 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
TIA TSB-143-2007 Fiber Optic Power Meters: Measurement and Application Issues
TIA-455-229-2002(2012) FOTP-229 Optical Power Handling and Damage Threshold Characterization
TIA-455-229-2002 FOTP-229 Optical Power Handling and Damage Threshold Characterization
TIA-526-2-2007 Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable
TIA-526-7-2002 OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant
TIA-526-11-1991 OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment
TIA-526-2-1989 OFSTP-2 Effective Transmitter Output Power Coupled Into Single-Mode Fiber Optic Cable ANSI APPROVAL WITHDRAWN FEBRUARY 2004

Guangdong Provincial Standard of the People's Republic of China, Optical power

DB44/T 1612-2015 General technical specification for high power fiber laser cutting machine

Professional Standard - Machinery, Optical power

JB/T 11667-2013 Fast axial flow high power CO<下标2> laser
JB/T 10785-2007 The high power transverse flow continuous wave C0 lasers
JB/T 6860-1993 Power and energy measuring detectors, instruments and equipment for laser radiation

National Metrological Technical Specifications of the People's Republic of China, Optical power

JJF 1755-2019 Calibration Specification for Passive Optical Network (PON) Power Meters
JJF 1326-1990 30~300 watts laser power benchmark operation technical specification
JJF 1327-1990 0.1~30 watt laser power benchmark operation technical specification
JJF 1328-1990 1-30 watt laser power sub-benchmark operation technical specification
JJF 1329-1990 0.1~100 mW laser power benchmark operation technical specification
JJF 1330-1990 0.1~100 mW laser power sub-benchmark operation technical specification

National Electrical Manufacturers Association（NEMA), Optical power

NEMA SSL 3-2011 HIGH-POWER WHITE LED BINNING FOR GENERAL ILLUMINATION
NEMA SSL 3-2010 HIGH-POWER WHITE LED BINNING FOR GENERAL ILLUMINATION

Hubei Provincial Standard of the People's Republic of China, Optical power

DB42/T 880-2013 Solar Photovoltaic Power Forecasting Regulations

Standard Association of Australia （SAA）, Optical power

AS 1359.30:1997 Rotating electrical machines - General requirements - Preferred outputs and frame sizes
AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution

BE-NBN, Optical power

NBN C 51-102-1979 Rotating electrical appliances, regarding the loss and power determination method of rotating electrical appliances, starting from trial
NBN-EN 61040-1993 Power and energy measuring detectors, instruments and equipment for laser radiation

Underwriters Laboratories (UL), Optical power

UL 1277-1989 Electrical power and control tray cables with optional optical-fiber members
UL 1277-2022 Electrical power and control tray cables with optional optical-fiber members
UL 1277-1996 Electrical power and control tray cables with optional optical-fiber members

IEC - International Electrotechnical Commission, Optical power

IEC 62627-08:2016 Fibre optic interconnecting devices and passive components – Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter (Edition 1.0)
IEC TR 61292-8:2019 Optical amplifiers – Part 8: High-power amplifiers (Edition 1.0)

Professional Standard-Ships, Optical power

CB 1231.7-1993 Electronic conversion module resolver power amplifier detail specification

SE-SIS, Optical power

SIS SS CECC 41301-1979 Blank detail specification: Low power single turn rotary potentiometers (Assessment level S)

PT-IPQ, Optical power

NP 2992/1-1985 Electronic component. Low Power Rotary Voltage Divider, Midpoint Specifications

Professional Standard - Chemical Industry, Optical power

HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance

Professional Standard - Energy, Optical power

NB/T 32011-2013 Technical requirement of power forecasting system for PV power station
NB/T10186-2019 Technical specifications for power conversion equipment for optical storage systems
NB/T 32007-2013 Testing code for power control of photovoltaic power station

Professional Standard - Meteorology, Optical power

QX/T 244-2014 Short term forecasting methods for solar photovoltaic power

国家市场监督管理总局、中国国家标准化管理委员会, Optical power

GB/T 40289-2021 Technical requirement of power control system for photovoltaic power station
GB/T 36358-2018 Semiconductor optoelectronic devices—Blank detail specification for power light-emitting diodes
GB/T 40607-2021 Technical requirements for dispatching side forecasting system of wind or photovoltaic power

Zhejiang Provincial Standard of the People's Republic of China, Optical power

DB33/T 2138-2018 Requirements for the maximum total power of light purse seine fishing lights

Institute of Electrical and Electronics Engineers (IEEE), Optical power

IEEE 2066-2021 IEEE Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser Systems
IEEE Std 2066-2021 IEEE Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser Systems
IEEE No 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-1975 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
ANSI/IEEE Std 286-1975(R1981) IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE P2066/D6, July 2021 IEEE Approved Draft Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser System

Illuminating Engineering Society of North America, Optical power

IESNA LM-85-2014 Approved Method for Electrical and Photometric Measurements of High-Power LEDs

International Organization for Standardization (ISO), Optical power

ISO 7119:1981 Continuous mechanical handling equipment for loose bulk materials; Screw conveyors; Design rules for drive power
ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
ISO 11554:1998 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
ISO 13694:2018 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution
ISO/CD 11554 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
ISO 11554:2003 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics

CEN - European Committee for Standardization, Optical power

EN ISO 13694:2018 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
EN ISO 11554:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics

Professional Standard - Medicine, Optical power

YY/T 0756-2009 Optics and Optical Instruments Lasers and Laser-related Equipment Laser Beam Power (Test Method for Energy Density Distribution

International Commission on Illumination (CIE), Optical power

CIE 206-2014 THE EFFECT OF SPECTRAL POWER DISTRIBUTION ON LIGHTING FOR URBAN AND PEDESTRIAN AREAS

European Committee for Standardization (CEN), Optical power

EN ISO 11554:1998 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power, Energy and Temporal Characteristics ISO 11554:1998
EN ISO 11554:2003 Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics
EN ISO 11554:2017 Optics and photonics -Lasers and laser-related equipment - Test methods for laser beam power@ energy and temporal characteristics
prEN ISO 11554 rev Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
EN ISO 13694:2015 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution

American Society for Testing and Materials (ASTM), Optical power

ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

AT-ON, Optical power

ONORM S 5056-1990 Measuring and worldng conditions for the determination of soundpower of woodworking machines; sanding machines

Insulated Cable Engineers Association （ICEA), Optical power

ICEA S-120-742-2016 STANDARD FOR HYBRID OPTICAL FIBER AND POWER CABLE FOR USE IN LIMITED POWER CIRCUITS