ZH
RU
ES
Friction and wear
Friction and wear, Total:60 items.
In the international standard classification, Friction and wear involves: Iron and steel products, Plastics, Conducting materials, Surface treatment and coating, Gears, Lubricants, industrial oils and related products, Internal combustion engines for road vehicles, Mechanical testing, Waxes, bituminous materials and other petroleum products, Ceramics, Linear and angular measurements, Vocabularies, Bearings, Passenger cars. Caravans and light trailers.
AT-ON, Friction and wear
International Federation of Trucks and Engines, Friction and wear
Group Standards of the People's Republic of China, Friction and wear
- T/CSTM 00646.1-2021 Ｍetal materials－Friction and wear testing with a pin-on-disk apparatus － Part 1: Friction and wear testing at ambient temperature
- T/CSTM 00646.2-2021 Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
- T/CSAE 109-2019 Evaluation of friction and wear properties of diesel engine oil SRV cylinder liner-piston ring method
- T/SASJL 0016-2023 Measurement method for wear of brake friction pads on autonomous driving buses
ES-AENOR, Friction and wear
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Friction and wear
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Friction and wear
- GB/T 3960-1983 Test method for friction and wear of plastics by sliding
- GB 3960-1983 Test method for friction and wear of plastics by sliding
工业和信息化部, Friction and wear
- YB/T 4993-2022 Test methods for friction and wear properties of carbon materials
Korean Agency for Technology and Standards (KATS), Friction and wear
- KS M ISO 6601-2003(2018) Plastics－Friction and wear by sliding－Identification of test parameters
- KS M ISO 6601:2003 Plastics－Friction and wear by sliding－Identification of test parameters
- KS L ISO 20808:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
IN-BIS, Friction and wear
German Institute for Standardization, Friction and wear
- DIN 51191:2015 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN 51191:2015-01 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
HU-MSZT, Friction and wear
Professional Standard - Petrochemical Industry, Friction and wear
- NB/SH/T 0847-2010 Standard test method for measuring friction and wear properties of extreme pressure(EP)lubricating oils using SRV test machine
- SH/T 0577-1993 Test method for high temperature friction and wear properties of railway diesel engine oil (bronze-steel method)
- SH/T 0721-2002 Standard test method for measuring friction and wear properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
National Metrological Technical Specifications of the People's Republic of China, Friction and wear
- JJF(建材)147-2018 Calibration Standard for Small Sample Shrinkage Inertia Friction and Wear Performance Testing Machines
- JJF(建材) 147-2018 Calibration specification for small scale inertial friction and wear performance testing machine
American Society for Testing and Materials (ASTM), Friction and wear
- ASTM D6279-99e1 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D6279-20 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D4170-10 Standard Test Method for Fretting Wear Protection by Lubricating Greases
- ASTM D2714-94(1998) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D2714-94(2019) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D3702-94(1999) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D5707-11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM C808-75(2000) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM C808-75(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM D5707-98(2003)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-98 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-19 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-16 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
国家市场监督管理总局、中国国家标准化管理委员会, Friction and wear
- GB/T 38074-2019 Standard test method for determining the friction and wear properties of manual transmission fluid using a high-frequency—Linear-oscillation（SRV）test machine
- GB/T 40398.1-2021 Test method for C-C composites—Part 1: Friction and wear property
Professional Standard - Energy, Friction and wear
- NB/SH/T 0721-2016 Determination of Friction and Wear Properties of Lubricating Grease High Frequency Linear Vibration Tester (SRV) Method
国家能源局, Friction and wear
- SH/T 0721-2016 Determination of friction and wear properties of grease using high-frequency linear vibration tester (SRV) method
Association Francaise de Normalisation, Friction and wear
- NF A91-151*NF ISO 18535:2016 Diamond-like carbon films - Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
- NF T51-108:1984 Plastics. Friction and wear by sliding. Definitions of terms and general characteristics.
European Committee for Standardization (CEN), Friction and wear
- EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
VN-TCVN, Friction and wear
- TCVN 5414-1991 Friction and wear in machines.Basic terms and definitions
PL-PKN, Friction and wear
- PN M87052-1991 Plain bearings.Friction and wear.Terminology and classification
American National Standards Institute （ANSI), Friction and wear
- ANSI/ASSE TR-A1264.3-2007 Technical Report: Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces
International Organization for Standardization (ISO), Friction and wear
- ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Friction and wear
- ASHRAE 3907-1995 Screening Lubricants for Refrigerant Compressors: A Comparison Between a Pin and Block Tester and the High-Pressure Tribometer
KR-KS, Friction and wear
- KS L ISO 20808-2018 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
ZA-SANS, Friction and wear
- SANS 4378-2:2005 Plain bearings - Terms, definitions and classification Part 2: Friction and wear
Japanese Industrial Standards Committee (JISC), Friction and wear
- JIS B 0162-2:2006 Plain bearings -- Terms, definitions and classification -- Part 2: Friction and wear