ZH
RU
ES

Use of UV spectrometer

Use of UV spectrometer, Total:276 items.

In the international standard classification, Use of UV spectrometer involves: Optics and optical measurements, Analytical chemistry, Physics. Chemistry, Water quality, Solar energy engineering, Paper products, Road vehicles in general, Environmental testing, Plastics, Products of the textile industry, Optical equipment, Fuels, Lubricants, industrial oils and related products, Protective equipment, Paints and varnishes, Radiation measurements, Coals, Non-destructive testing, Protection against fire, Test conditions and procedures in general, Fibre optic communications, Soil quality. Pedology, Cereals, pulses and derived products, Animal feeding stuffs, Air quality, Wastes, Radiation protection, Raw materials for rubber and plastics, Products of the chemical industry, Rubber and plastics products, Pipeline components and pipelines, Non-ferrous metals, Testing of metals, Packaging materials and accessories.

American Society for Testing and Materials (ASTM), Use of UV spectrometer

ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E3006-20 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM E3006-15 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM D6625-13 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
ASTM E2310-04(2009) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D5110-98 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5110-22 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5110-22a Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5110-98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM D7418-20 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-12(2019) Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ASTM E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM D8267-19 Standard Test Method for Determination of Saturated Hydrocarbon, Aromatic, and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Det
ASTM D8368-21 Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM UOP407-09 Trace Metals in Organics by Dry Ashing - ICP-OES
ASTM D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detecti
ASTM D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviol

British Standards Institution (BSI), Use of UV spectrometer

BS PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
BS ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use
PD ISO/TS 10868:2017 Tracked Changes. Nanotechnologies. Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
BS EN 170:2003 Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use
BS ISO 22576:2020 Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
BS 6068-2.49:1995 Water quality. Physical, chemical and biochemical methods. Determination of aluminium. Spectrometric method using pyrocatechol violet
PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
19/30362632 DC BS ISO 22576. Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
18/30382086 DC BS EN 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
20/30412413 DC BS EN IEC 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS ISO 11916-1:2013 Soil quality. Determination of selected explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
BS ISO 11382:2011 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 $Gmm to 25 $Gmm
BS IEC 61452:2021 Nuclear instrumentation. Measurement of activity or emission rate of gamma-ray emitting radionuclides. Calibration and use of germanium-based spectrometers
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
22/30444633 DC BS ISO 11382. Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
BS EN 16424:2014 Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instruments
BS ISO 11382:2022 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
PD IEC TR 61292-2:2003 Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
BS IEC 61275:2013 Radiation protection instrumentation. Measurement of discrete radionuclides in the environment. In situ photon spectrometry system using a germanium detector
BS DD ISO/TS 10868:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
BS EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1:Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS EN 927-6:2018 Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
BS EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6:Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
BS EN 927-6:2008 Paints and varnishes - Coating materials and coating systems for exterior wood - Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
BS EN 16344:2013 Cosmetics. Analysis of cosmetic products. Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC
BS EN ISO 13196:2015 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
BS ISO 14382:2012 Workplace atmospheres. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors

International Organization for Standardization (ISO), Use of UV spectrometer

ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO 11382:2022 Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
ISO/CD 8237-1 Optical materials and components — Specification of chalcogenide glass used in the infrared spectrum — Part 1: Definitions and general
ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
ISO/CD 13196:2023 Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
ISO/DIS 19702:2023 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO 14382:2012 Workplace atmospheres - Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy

Lithuanian Standards Office , Use of UV spectrometer

LST ISO 10566:1998 Water quality. Determination of aluminium. Spectrometric method using pyrocatechol violet
LST EN ISO 11369:2000 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
LST EN 15948-2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
LST EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
LST EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
LST EN 61290-10-1-2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009)
LST EN 61290-10-2-2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
LST EN 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007)
LST EN 927-6-2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
LST EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)

海关总署, Use of UV spectrometer

SN/T 5153-2019 Determination of fluorescent whitening agent content in household paper by UV spectroscopy

SAE - SAE International, Use of UV spectrometer

SAE J2020-1989 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
SAE J2020-2002 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
SAE J2020-1995 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
SAE J2020-2022 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
SAE J2020-2016 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

Society of Automotive Engineers (SAE), Use of UV spectrometer

SAE J2020-2003 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
SAE J1961-2011 Accelerated Exposure of Automotive Exterior Materials Using a Solar Fresnel Reflective Apparatus

Danish Standards Foundation, Use of UV spectrometer

DS/ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
DS/EN 170:1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
DS/EN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
DS/EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
DS/ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
DS/ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument

Japanese Industrial Standards Committee (JISC), Use of UV spectrometer

JIS K 0400-58-10:1998 Water quality -- Determination of aluminium -- Spectrometric method using pyrocatechol violet
JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer

German Institute for Standardization, Use of UV spectrometer

DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)
DIN EN ISO 22478:2006-07 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006); German version EN ISO 22478:2006
DIN EN 14255-4:2007-02 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements; German version EN 14255-4:2006
DIN EN 15948:2020-12 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
DIN IEC 61452:2023-02 Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers (IEC 61452:2021)
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
DIN 51453:2004 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
DIN ISO 11916-1:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection (ISO 11916-1:2013)
DIN IEC 61275:2014 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector (IEC 61275:2013)
DIN 51639-4:2020 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
DIN EN 927-6:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
DIN EN 16424:2015 Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments; German version EN 16424:2014
DIN EN 15948:2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
DIN EN ISO 13196:2015-11 Soil quality - Sreening soils for selected elements by energy-dipersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013); German version EN ISO 13196:2015

Association Francaise de Normalisation, Use of UV spectrometer

NF T51-182*NF ISO 10640:2011 Plastics - Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy.
NF V03-091-3*NF EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3 : UV spectrometric xanthogenate method
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF X30-495*NF EN 16424:2014 Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence intruments
NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique
XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
NF T34-201-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6 : exposure of wood coatings to artificial weathering using fluorescent UV lamps and water.
NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
NF ISO 11916-1:2013 Qualité du sol - Dosage d'une sélection d'explosifs et de composés apparentés - Partie 1 : méthode utilisant la chromatographie liquide à haute performance (CLHP) avec détection ultraviolet
NF X31-013:2013 Soil quality - Screening soils for selected elements by energy dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
NF T34-201-6*NF EN 927-6:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6 : exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif
NF X31-013*NF EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique

NL-NEN, Use of UV spectrometer

NEN-EN 170-1992 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use

BE-NBN, Use of UV spectrometer

NBN S 06-003-1986 Personal eye-protection - U11ravioletfi1 ters -Transmittance requirements and recommended utilisation

Standard Association of Australia （SAA）, Use of UV spectrometer

AS 3753:2001 Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry
AS/NZS 3580.15:2014
AS 4479.4:1999 Analysis of soils - Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry

Korean Agency for Technology and Standards (KATS), Use of UV spectrometer

KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use
KS C IEC 61452-2017(2022) Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
KS C IEC 61290-10-1:2005 Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer
KS C IEC 61275:2005 Radiation protection instrumentation-Measurement of discrete radionuclides in the environment-In situ photon spectrometry system using a germanium detector
KS C IEC 61275:2016 Radiation protection instrumentation－Measurement of discrete radionuclides in the environment－In situ photon spectrometry system using a germanium detector
KS C IEC 61290-10-2:2005 Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer
KS C IEC 61275-2016(2021) Radiation protection instrumentation－Measurement of discrete radionuclides in the environment－In situ photon spectrometry system using a germanium detector
KS I ISO 14382:2020 Workplace atmospheres — Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet a
KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods－Part 5－3：Test methods for reflectance parameters－Reflectance tolerance using an electrical spectrum analyser

Professional Standard - Energy, Use of UV spectrometer

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)
NB/SH/T 0911-2015 Standard practice for set-up and operation of Fourier transform infrared (FT-IR) spectrometers for in-service oil condition monitoring

国家能源局, Use of UV spectrometer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

PH-BPS, Use of UV spectrometer

PNS ISO/TS 17466:2021 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots

KR-KS, Use of UV spectrometer

KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
KS C IEC 61452-2017 Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
KS C IEC 61275-2016 Radiation protection instrumentation－Measurement of discrete radionuclides in the environment－In situ photon spectrometry system using a germanium detector
KS I ISO 14382-2020 Workplace atmospheres — Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet a

RU-GOST R, Use of UV spectrometer

GOST 32465-2013 Solid mineral fuel. Determination of sulfur by IR spectrometry
GOST 30131-1996 Oil-cake and ground oil-cake. Determination of moisture, oil and protein by infrared reflectance
GOST R ISO 14382-2015 Workplace air. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
GOST 33077-2014 Biodiesel fuel blends. Determination of fatty acid methyl esters (FAME) content using mid infrared spectroscopy (FTIR-ATR-PLS method)

AT-ON, Use of UV spectrometer

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
OENORM EN 15948-2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

International Telecommunication Union (ITU), Use of UV spectrometer

ITU-R REPORT SM.2048-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain
ITU-R INFORME SM.2048 SPANISH-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain

(U.S.) Ford Automotive Standards, Use of UV spectrometer

FORD WSS-M4D638-C2-2006 POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-C)
FORD WSB-M4D690-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D638-A-2006 POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-B)
FORD ESB-M4D483-A1-2011 ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D995-A-2005 THERMOPLASTIC POLYOLEFIN (TEO) MOLDING COMPOUND, COLOR PIGMENTED, UV STABILIZED, FOR HIGH GLOSS (CLASS "B") MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D871-A5-2006 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A***
FORD WSB-M4D690-A-2005 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D483-A2-2011 ABS, MEDIUM IMPACT- HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Use of UV spectrometer

IEEE N42.14-1991 Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

ES-UNE, Use of UV spectrometer

UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 15948:2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 61290-10-4:2007 Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007). (Endorsed by AENOR in November of 2007.)
UNE-EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013) (Endorsed by AENOR in September of 2015.)
UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)

European Committee for Electrotechnical Standardization（CENELEC）, Use of UV spectrometer

EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser

International Electrotechnical Commission (IEC), Use of UV spectrometer

IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
IEC 61452:2021 Nuclear instrumentation - Measurement of activity or emission rate of gamma- ray emitting radionuclides - Calibration and use of germanium-based spectrometers
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
IEC 61275:1997 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
IEC 61275:2013 Radiation protection instrumentation.Measurement of discrete radionuclides in the environment.In situ photon spectrometry system using a germanium detector
IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer

CENELEC - European Committee for Electrotechnical Standardization, Use of UV spectrometer

EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer
EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

Institute of Electrical and Electronics Engineers (IEEE), Use of UV spectrometer

IEEE/ANSI N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
ANSI Std N42.14-1991 American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

AENOR, Use of UV spectrometer

UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).
UNE-EN ISO 22478:2007 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
UNE-EN 927-6:2007 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

CH-SNV, Use of UV spectrometer

SN EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
SN EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)

IT-UNI, Use of UV spectrometer

UNI EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
UNI EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry.

CEN - European Committee for Standardization, Use of UV spectrometer

PREN 15948-2018 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels

American National Standards Institute （ANSI), Use of UV spectrometer

ANSI/ASTM D8290:2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ANSI/ASTM D6342:1998 Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

European Committee for Standardization (CEN), Use of UV spectrometer

EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
EN 16344:2013 Cosmetics - Analysis of cosmetic products - Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC
EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013)
prEN ISO 13196 rev Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument

European Association of Aerospace Industries, Use of UV spectrometer

AECMA PREN 2712-007-1991 Aerospace Series Single and Multicore Electrical Cables Screened (Spiral) and Jacketed for General Use Operating Temperatures Between -55 and +150 Degrees Celsius UV Laser Printable Product Standard