ZH
RU
ES

Principles of Micro Instruments

Principles of Micro Instruments, Total:219 items.

In the international standard classification, Principles of Micro Instruments involves: Analytical chemistry, Nuclear energy engineering, Industrial automation systems, Microprocessor systems, Linear and angular measurements, Applications of information technology, Optical equipment, Optics and optical measurements, Construction industry, Vocabularies, Electronic tubes, Ergonomics, Glass, Microbiology, Integrated circuits. Microelectronics, Water quality, Air quality, Power stations in general, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Metrology and measurement in general, Technical drawings, Company organization and management, Quality, Thermodynamics and temperature measurements, Particle size analysis. Sieving, Protection against crime, Environmental testing, Mechanical testing, Textile fibres, Radiation protection, Fuels, Products of the chemical industry, Sports equipment and facilities, Standardization. General rules, Earthworks. Excavations. Foundation construction. Underground works, Non-destructive testing, Data storage devices, Aircraft and space vehicles in general, Measurement of fluid flow, On-board equipment and instruments, Milk and milk products, Document imaging applications, Ground service and maintenance equipment, Plastics, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Electronic components in general, Electromagnetic compatibility (EMC).

IET - Institution of Engineering and Technology, Principles of Micro Instruments

PRINC MICROW MEAS-1993 Principles of Microwave Measurements

未注明发布机构, Principles of Micro Instruments

BS 1428-D5:1955(2007) Specification for Syringe pattern micro - pipette — Microchemical apparatus — Group D : volumetric apparatus
BS 1428-D4:1963(2010) Specification for Capillary pipettes — Microchemical apparatus — Group D : Volumetric apparatus
ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1
BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities

VN-TCVN, Principles of Micro Instruments

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

British Standards Institution (BSI), Principles of Micro Instruments

BS 1428-D5:1955 Microchemical apparatus - Volumetric analysis - Specification for syringe pattern micro-pipette
PD IEC TS 62098:2001 Evaluation methods for microprocessor-based instruments
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis. Specification for capillary pipettes
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS 1428-D1:1965 Microchemical apparatus - Volumetric analysis - Specification for burettes with pressure-filling device and automatic zero
BS 1428-B2:1960 Microchemical analysis - Apparatus for the determination of elements by other than combustion methods - Specification for ammonia distillation apparatus (Markham)
BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
23/30450169 DC BS EN ISO 7726. Ergonomics of the thermal environment. Instruments for measuring and monitoring physical quantities
BS 5898:1980 Specification for principles of design and construction of volumetric glassware for laboratory use
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

Korean Agency for Technology and Standards (KATS), Principles of Micro Instruments

KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC TS 62098-2005(2020) Evaluation methods for microprocessor-based instruments
KS C IEC TS 62098:2005 Evaluation methods for microprocessor-based instruments
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS D ISO 15632:2012 Microbeam analysis－Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS B 4407-2013 Numerical control processor output－Minor elements of 2000-type records
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS C IEC 61577-1:2012 Radiation protection instrumentation－Radon and radon decay product measuring instruments－Part 1：General principles
KS A 4054-2005(2010) Radiographic image quality indicators for non-destructive testing－Principles and identification
KS B ISO 1027-2007(2012) Radiographic image quality indicators for non－destructive testing－Principles and identification
KS X ISO 11928-2:2007 Micrographics-Quality control of graphic COM recorders-Part 2:Quality criteria and control
KS X ISO 11928-2:2013 Micrographics－Quality control of graphic COM recorders－Part 2：Quality criteria and control

Danish Standards Foundation, Principles of Micro Instruments

DS/IEC/TS 62098:2002 Evaluation methods for microprocessor-based instruments
DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/ISO 1027:1987 Radiographic image quality indicators for non-destructive testing. Principles and identification

American Society for Testing and Materials (ASTM), Principles of Micro Instruments

ASTM E236-66(2006) Standard Specification for Apparatus For Microdetermination Of Alkoxyl Groups
ASTM E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
ASTM E147-61(1996) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E147-61(2001) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E147-61(2006) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
ASTM E124-94(2010) Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5867-12 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D5867-12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D7133-05 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

German Institute for Standardization, Principles of Micro Instruments

DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
DIN 19265:2007 pH-/redox-measurement - pH-/redox measuring apparatus - Technical requirements
DIN IEC 61577-1:2007 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General principles (IEC 61577-1:2006)
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN 19223:2002 Control technology - Rules for the designation of measuring instruments
DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN ISO 15632:2015 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis (ISO 15632:2012)
DIN ISO 17123-1:2017 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory (ISO 17123-1:2014)
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN 58959-20:1997 Quality management in medical microbiology - Part 20: Requirements for the use of control material for the examination of protozoae and microorganisms of higher order
DIN 58959-20:1997-06 Quality management in medical microbiology - Part 20: Requirements for the use of control material for the examination of protozoae and microorganisms of higher order
DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
DIN 58959-18:1997 Quality management in medical microbiology - Part 18: Requirements for the use of control strains for the examination of mycoplasms
DIN EN ISO 7726:2023-08 Ergonomics of the thermal environment - Instruments for measuring and monitoring physical quantities (ISO/DIS 7726:2023); German and English version prEN ISO 7726:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 7726 (2021-03).
DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
DIN 19635:1992 Dosing apparatus for drinking water treatment; requirements, testing, operation; DVGW code of practice
DIN 58959-15:1997 Quality management in medical microbiology Part 15: Requirements for the use of control strains for susceptibility testing of anaerobic bacteria
DIN EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019

AT-ON, Principles of Micro Instruments

ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
ONORM M 5872-2001 Equipment of water treatment plants for swimming pools with measuring and control instruments

Association Francaise de Normalisation, Principles of Micro Instruments

NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF X21-008:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive ray spectrometers for use in electron probe microanalysis
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
NF S10-041:1998 Optics and photonics - Optical transfer function - Principles and procedures of measurement.
NF X44-051:1978 Dépoussiéreurs - Classification et principes de mesure de leurs caractéristiques
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF EN ISO 18674-3:2017 Reconnaissance et essais géotechniques - Surveillance géotechnique par instrumentation in situ - Partie 3 : mesurages des déplacements perpendiculairement à une ligne par inclinomètre

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principles of Micro Instruments

GB/T 19767-2005 Evaluation methods for microprocesssor-based instrument
GB/T 12809-1991 Laboratory glassware--Principles of design and construction of volumetric glassware
GB/T 12809-2015 Principles of design and construction of laboratory glassware glass measuring vessels
GB/T 13163.1-2009 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 1:General principles
GB/T 19267.4-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 4:Atomic emission spectrometry
GB/T 19267.5-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 5:Atomic absorption spectrometry
GB/T 19267.4-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 4: Atomic emission spectrometry
GB/T 19267.5-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 5: Atomic absorption spectrometry
GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
GB/T 26930.10-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 10:Determination of sulful content by an instrumental method
GB/T 26834-2011 Non-destructive testing instruments.Measurement of effective focal spot size of mini and micro focus X-ray tubes

International Electrotechnical Commission (IEC), Principles of Micro Instruments

IEC TS 62098:2000 Evaluation methods for microprocessor-based instruments
IEC 60516:1975 A modular instrumentation system for data handling; CAMAC system

PL-PKN, Principles of Micro Instruments

PN T06565-1972 Microwave measuring Instruments Phase shifters General re?uirements and tests
PN T06560-1971 Microwave measuring instruments Attenuators General re?uirements and tests
PN T06562-1971 Micrio
PN M53201-1988 Measuring instruments Adjusting standards for external micrometers
PN T06563-1972 Microwave measuring instruments Terminations General re?uirements and tests
PN T06564-1972 Microwave measuring instruments Power meters General ra?uirements and tests
PN T06561-1971 Microwave measuring instruments Cavity wavemeter General requirements and tests
PN T06513-03-1989 Redox potential value Laboratory measuring instruments General reguirements and tests
PN ISO 8322-1:1993 Building construction. Measuring instruments. Procedures for determining accuracy in use Part 1. Theory

SE-SIS, Principles of Micro Instruments

SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SS IEC 615:1983 Electronic measuring equipment - Terminology for microwave apparatus
SIS SEN 01 27 60-1971 Symbols for electrical diagrams. Masers and lasers
SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

International Organization for Standardization (ISO), Principles of Micro Instruments

ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO 15632:2021 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
ISO 15632:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
ISO 15632:2002 Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

KR-KS, Principles of Micro Instruments

KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

ES-UNE, Principles of Micro Instruments

UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)

CU-NC, Principles of Micro Instruments

NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification
NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means

Professional Standard - Agriculture, Principles of Micro Instruments

363药典三部-2020 Guiding principle 9203 Guiding principles for quality management of pharmaceutical microbiology laboratories
345药典四部-2020 9000 Guidelines 9203 Guidelines for Quality Management of Pharmaceutical Microbiology Laboratories
326药典四部-2015 9000 Guidelines 9203 Guidelines for Quality Management of Pharmaceutical Microbiology Laboratories
884兽药典一部-2015 Appendix Contents 9000 Guidelines 9203 Guidelines for Quality Management of Veterinary Drug Microbiology Laboratories
850兽药典二部-2015 Appendix Contents 9000 Guidelines 9022 Guidelines for Quality Management of Veterinary Drug Microbiology Laboratories
332药典三部-2015 Technical Guide 9203 General Principles of Pharmaceutical Microbiology Laboratory Quality Management Guidelines 218
226药典第三增补本-2010 Appendices of the Second Revised Appendices Appendix XIX Q Quality Management Guidelines for Pharmaceutical Microbiological Laboratories
91药典第三增补本-2010 A Revised Appendices Appendix ⅩⅧ G Guidelines for Quality Management of Pharmaceutical Microbiology Laboratories
空气和废气监测分析方法 3.4.2-2003 Part 3 Air Quality Monitoring Chapter 4 Air Quality Continuous Automatic Monitoring System (B) 2 Working Principle of Air Quality Continuous Automatic Monitoring Instrument

RU-GOST R, Principles of Micro Instruments

GOST 14828-1969 Instruments for physical-chemical quantities measurement. Radiospectrometers. Terms
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 29106-1991 Semiconductor devices. Integrated circuits. Part 1. General
GOST R 56069-2014 Requirements for experts and specialists. Verification of measuring instruments. Basic principles
GOST R 56069-2018 Requirements for experts and specialists. Verifier of measuring instruments. General requirements
GOST R 8.654-2015 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST 4.136-1985 Product-quality index system. Thermophysical apparatus. Nomenclature of indices
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.818-2013 State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles
GOST R 54843-2011 Microsystem technology products. Sensitive elements of microelectromechanical transducers of physical quantities. Generic specifications
GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST 28387-1989 Microwave radio beacon instrument approach landing system for air vehicls. Main parameters and measurement techniques
GOST 29178-1991 Electromagnetic compatibility of technical means. HUF electrovacuum equipment. Generators, amplifiers and modules on their basis. Requirements for side oscillations levels

CZ-CSN, Principles of Micro Instruments

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices

RO-ASRO, Principles of Micro Instruments

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities

Japanese Industrial Standards Committee (JISC), Principles of Micro Instruments

JIS K 3602:1990 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor
JIS K 3602 AMD 1:2006 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor (Amendment 1)
JIS K 0199:2023 Guideline for alignment procedure for identical location analysis between different microscopic measuring instruments

American Society of Quality Control （ASQC), Principles of Micro Instruments

ASQ Q10012-2003 Measurement management systems Requirements for measurement processes and measuring equipment T810

国家市场监督管理总局、中国国家标准化管理委员会, Principles of Micro Instruments

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities

Group Standards of the People's Republic of China, Principles of Micro Instruments

T/CEC 426.1-2020 General technical requirements for electric oil testing instruments Part 1: Trace moisture analyzer
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CSES 43-2021 Technical specifications for online monitoring equipment of Biochemical Oxygen Demand based on in situ biofilm
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/HZQT 00006-2022 Textile Testing Laboratory Quality—Management Instrument and Equipment Period Verification

Lithuanian Standards Office , Principles of Micro Instruments

LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)

PH-BPS, Principles of Micro Instruments

PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments

SAE - SAE International, Principles of Micro Instruments

SAE AIR6226-2014 Trimmable Horizontal Stabilizer Actuator Structural Load Path Integrity Monitoring Principles

ZA-SANS, Principles of Micro Instruments

SANS 250:2003 Measurement management systems - Requirements for measurement processes and measuring equipment

United States Navy, Principles of Micro Instruments

NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MIL-T-24387 A (3)-1979 TEMPERATURE MEASUREMENT EQUIPMENT SIGNAL CONDITIONER AND POWER SUPPLY (ELECTRICAL) (NAVAL SHIPBOARD USE)
NAVY MIL-T-24387 A-1973 TEMPERATURE MEASUREMENT EQUIPMENT SIGNAL CONDITIONER AND POWER SUPPLY (ELECTRICAL) (NAVAL SHIPBOARD USE)

Professional Standard - Machinery, Principles of Micro Instruments

JB/T 2542-1991 General specification for optomechanical micrometer devices for optical metrology instruments

AENOR, Principles of Micro Instruments

UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Principles of Micro Instruments

IEEE C95.3-1973 TECHNIQUES AND INSTRUMENTATION FOR THE MEASUREMENT OF POTENTIALLY HAZARDOUS ELECTROMAGNETIC RADIATION AT MICROWAVE FREQUENCIES (R 1979)

Professional Standard - Electricity, Principles of Micro Instruments

DL/T 1029-2006 Laboratory quality management guide for water quality analyzers in thermal power plant

CN-STDBOOK, Principles of Micro Instruments

图书 A-4692 The principle and detection technology of metering instruments for operating passenger cars

IN-BIS, Principles of Micro Instruments

IS 12257 Pt.1-1987

American National Standards Institute （ANSI), Principles of Micro Instruments

ANSI/ISO 2690:1997 Unrecorded Magnetic Tapes for Instrumentation Applications - Physical Properties and Test Methods

European Committee for Standardization (CEN), Principles of Micro Instruments

EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
EN 27726:1993 Thermal Environments - Instruments and Methods for Measuring Physical Quantities (ISO 7726 : 1985) Superseded by EN ISO 7726:2001

NZ-SNZ, Principles of Micro Instruments

SAA/SNZ HB 86.1-1996 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 1: General Principles

Institute of Electrical and Electronics Engineers (IEEE), Principles of Micro Instruments

ANSI Std C95.3-1973 American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies
IEEE/ANSI C95.3-1973 American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies
ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions

Indonesia Standards, Principles of Micro Instruments

SNI 7881-2013

Xinjiang Provincial Standard of the People's Republic of China, Principles of Micro Instruments

DB65/T 3920-2016 Cotton quality instrumentation notarization inspection laboratory construction and management specifications

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principles of Micro Instruments

ASHRAE SA-96-2-4-1996 Principles of Refrigerant Circuiting with Application to Microchannel Condensers: Part II - The Pressure-Drop Effect and the Cross-Flow Heat Exchanger Effect

Standard Association of Australia （SAA）, Principles of Micro Instruments

AS 2300.1.8.1:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Analytical quality assurance of instrumental methods - Protein in milk

BE-NBN, Principles of Micro Instruments

NBN C 73-704-2-4-1992

CEN - European Committee for Standardization, Principles of Micro Instruments

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss

Professional Standard - Traffic, Principles of Micro Instruments

JT/T 30.3-1993 Technical grade standards for workers in the transportation industry Waterway dredging and dredging Measuring instrument repairers

IX-EU/EC, Principles of Micro Instruments

73/360/EEC-1973 Council Directive on the Approximation of the Laws of the Member States Relating to Non-Automatic Weighing Machines