ZH
RU
ES
relatively poor,
relatively poor,, Total:82 items.
In the international standard classification, relatively poor, involves: Products of the chemical industry, Paint ingredients, Electronic tubes, Surface treatment and coating, Geology. Meteorology. Hydrology, Screw threads, Sewing machines and other equipment for the clothing industry, Non-ferrous metals, Fuels, Pipeline components and pipelines, Petroleum products in general, Welding, brazing and soldering, Gears, Wood-based panels, Linear and angular measurements, Metrology and measurement in general, Road engineering.
CZ-CSN, relatively poor,
- CSN 01 4347-1964 Matching of threads Limit deviations of Whitworth bolts threads
- CSN 01 4332-1962 Matching of threads. Limit deviationa of matric threads of bolts Sn
- CSN 01 4346-1964 Matching of threads. Limit deviations of Whitworth nut threads
- CSN 01 4312-1962 Matching of threads. Limit deviationa of minor diameter of bolt thread
- CSN 01 4325-1962 Matching of threads. Limit deviations of nut metric threads of fits SH
- CSN 01 4328-1962 Matching of threads. Limit deviation of metric threads of bolts So 8
- CSN 01 4333-1962 Matching of threads. Limit devialions of metric threads of bolts Sp
- CSN 01 4330-1962 Matching of threads. Limit deviationa of metric threeds of bolts S
- CSN 01 4329-1962 Matching of threads. Limit deviations of metric threads of bolts Sd 8
- CSN 01 4327-1962 Matching of threada. Limit deviations of outaide metrio threads of bolts Sh
Society of Motion Picture and Television Engineers (SMPTE), relatively poor,
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, relatively poor,
- GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
- GB/T 32378-2015 Determination of long-term ultimate bending strain and long-term ultimate relative ring deformation of glass fiber reinforced thermosetting plastic (GRP) pipes in a wet environment
TR-TSE, relatively poor,
- TS 2345-1976 RULES POR MEASUREMENT OF AZIMUTH ?N TRIANGULATION ETWORKS BY MEANS OF POLE—STAR AND ACCEPTABLE RROR LIMITS
RU-GOST R, relatively poor,
- GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
- GOST 21106.6-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Measurement methods of currents of anode and grids, having positive voltage relative to cathode and zero anode and grids currents
- GOST R 55869-2013 Solid recovered fuels. Report on relative difference between biodegradable and biogenic fractions of SRF
- GOST 21106.2-1975 Oscillator tubes anode dissipated more than 25 W. Test method for relative level of combinative products
- GOST R 54268-2010 Aviation fuels and petroleum distillates. Determination of aromatic hydrocarbon types by high perfomance liquid chromatography method with refractive index detection
- GOST R 54268-2010(2019) Aviation fuels and petroleum distillates. Determination of aromatic hydrocarbon types by high perfomance liquid chromatography method with refractive index detection
- GOST R 57030-2016 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test method for determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- PNST 179-2016 Road hot asphalt mixtures and asphalt concrete. Method for determination of bending tensile strength and ulimate relative tensile strain
Association Francaise de Normalisation, relatively poor,
- NF A91-487:2010 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings.
- NF C46-302:1983 Industrial-Process Measurement and Control
Acceptance tests for absolute pressure,relative pressure,and differential pressure transmitters
- UTE C46-302U*UTE C46-302:1983 Industrial-process measurement and control. Acceptance tests for absolute pressure, relative pressure, and differential pressure transmitters.
- NF EN IEC 63093-13:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 13 : noyaux PQ
- NF E03-055:2004 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing.
- NF E03-055*NF ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- FD X34-206*FD CEN/TR 14980:2006 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fraction of SRF
- FD CEN/TR 14980:2006 Combustibles solides de récupération - Rapport portant sur la différence relative entre les fractions biodégradables et biogène des combustibles solides de récupération
Canadian Standards Association (CSA), relatively poor,
Professional Standard - Machinery, relatively poor,
- JB/T 5192.3-1991 Matching dimensions and limit deviation of mechanical riveting parts for riveting of discs and wheels
- JB/T 5192.2-1991 Matching dimensions and limit deviation of mechanical riveted parts
- JB/T 5192.4-1991 Matching dimensions and limit deviation of photomechanical riveting parts
- JB/T 5192.1-1991 Matching dimensions and limit deviations of mechanical riveting parts Riveting of cylindrical rivets and countersunk rivets with connecting holes
Institute of Electrical and Electronics Engineers (IEEE), relatively poor,
- SMPTE RP 148:1987 RP 148:1987 - SMPTE Recommended Practice - Relative Polarity of Stereo Audio Signals
Professional Standard - Meteorology, relatively poor,
- QX/T 91-2008 Observation methods of indoor microclimate.air temperature,relative humidity and indoor-outdoor-air temperature difference
German Institute for Standardization, relatively poor,
- DIN 158-1:1997 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
- DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method
- DIN EN 12373-5:1999 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
- DIN-Fachbericht CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fraction of SRF
- DIN 55986:1981 Testing of pigments; determination of relative tinting strength and colour difference after colour reduction; colorimetric method
- DIN 55603 Bb.1:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method - Calculation example and example of test report
Professional Standard - Light Industry, relatively poor,
- QB/T 4299-2012 Testing method of relative tolerance of sewing machine.forward and backward stitch length
- QB/T 4298-2012 Testing method of relative tolerance of sewing machine.High and low speed stitch length
Korean Agency for Technology and Standards (KATS), relatively poor,
- KS M ISO 10471:2004 Glass-reinforced thermosetting plastics(GRP) pipes－Determination of the long-term ultimate bending strain and long-term ultimate relative ring deflection under wet conditions
- KS M ISO 10471:2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- KS B ISO 1328-1-2005(2020) Cylindrical gears－ISO system of accuracy－Part 1：Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
KR-KS, relatively poor,
- KS M ISO 10471-2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- KS B ISO 14635-2-2009 Gear－FZG test procedures－Part 2：FZG step load test A10/16,6R/120 for relative scuffing load-carrying capacity of high EP oils
International Telecommunication Union (ITU), relatively poor,
- ITU-R INFORME SM.2092 SPANISH-2007 Studies related to the impact of active services allocated in adjacent or nearby bands on Earth exploration-satellite service (passive)
International Organization for Standardization (ISO), relatively poor,
- ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- ISO 10471:2018 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- ISO 10471:2003/Amd 1:2010 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions; Amendment 1
British Standards Institution (BSI), relatively poor,
- BS ISO 10471:2018 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- BS ISO 14635-2:2004 Gears. FZG test procedures. FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
- BS ISO 965-4:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- BS ISO 965-5:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- BS ISO 965-4:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- BS ISO 965-5:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., relatively poor,
- ASHRAE DA-07-031-2007 Requirements for a Probabilistic Quantiative Relative Risk-Based Decision Methodology for Reducing Vulnerability of Building Occupants to Extreme IAQ Events
American Society for Testing and Materials (ASTM), relatively poor,
- ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
- ASTM D7729-12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
- ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
- ASTM E3324-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS)
PT-IPQ, relatively poor,
- NP EN 757-2000 Welding consumables Covered electrodes for manual metal arc welding of high strength steels Classification
- NP EN 312-6-2002 Particleboards Specifications Part 6:Requirements for heavy duty load-bearing boards for use in dry conditions
- NP EN 312-7-2002 Particleboards Specifications Part 7:Requirements for heavy duty load-bearing boards for use in humid conditions
HU-MSZT, relatively poor,
VN-TCVN, relatively poor,
- TCVN 4683-5-2008 ISO general purpose metric screw threads.Tolerances.Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
TH-TISI, relatively poor,
- TIS 339.5-2008 Iso general purpose metric screw threads.tolerances.part 5: limits of sizes for internal screw threads to mate with hot.dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- TIS 339.4-2008 Iso general purpose metric screw threads.tolerances.part 4: limits of sizes forhot.dip galvanized external screwthreads to mate with internal screw threads tapped with to leranceposition hor gaftergalvanizing
Japanese Industrial Standards Committee (JISC), relatively poor,
- JIS B 0209-5 ERRATUM 1:2002 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (Erratum 1)
- JIS B 1702-1:1998 Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
- JIS K 5101-3-4:2004 Test methods for pigments -- Part 3: Tinting strength -- Section 4: Determination of relative tinting strength and residual colour difference of colorants -- Weighted K/S value method
National Aeronautics and Space Administration (NASA), relatively poor,
- NASA NACA-TN-2399-1951 Applicability of the hypersonic similarity rule to pressure distributions which include the effects of rotation for bodies of revolution at zero angle of attack
GOSTR, relatively poor,
- GOST 34647-2020 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Method for determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
RO-ASRO, relatively poor,
- STAS 10802-1980 RELIABILITY OF LOW VOLTAGE APPARATUS Statistical determination method of mechanical endurance limited to a specified reliability level
Danish Standards Foundation, relatively poor,
- DS/CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
AENOR, relatively poor,
- UNE-CEN/TR 14980:2009 IN Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF
European Committee for Standardization (CEN), relatively poor,
- EN 1227:1997 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Relative Ring Deflection under Wet Conditions