ZH
RU
ES

Sample preparation and measurement

Sample preparation and measurement, Total:497 items.

In the international standard classification, Sample preparation and measurement involves: Spices and condiments. Food additives, Construction materials, General methods of tests and analysis for food products, Ferrous metals, Products of the chemical industry, Paint ingredients, Lamps and related equipment, Adhesives, Earthworks. Excavations. Foundation construction. Underground works, Fertilizers, Laboratory medicine, Optical equipment, Testing of metals, Iron and steel products, Fuels, Electromechanical components for electronic and telecommunications equipment, Paints and varnishes, Aircraft and space vehicles in general, Leather technology, Metalliferous minerals, Technical product documentation, Medical equipment, Linear and angular measurements, Water quality, Air quality, Products of the textile industry, Clothes, Nuclear energy engineering, Soil quality. Pedology, Inorganic chemicals, Cereals, pulses and derived products, Wood, sawlogs and sawn timber, Analytical chemistry, Road engineering, Powder metallurgy, Optics and optical measurements, Kitchen equipment, Document imaging applications, Wastes, Metrology and measurement in general, Rubber and plastics products, Microbiology, Industrial automation systems, Chipless working equipment, Lubricants, industrial oils and related products, Petroleum products in general, Measurement of volume, mass, density, viscosity, Tea. Coffee. Cocoa, Protection against fire, Corrosion of metals, Welding, brazing and soldering, Plastics, Energy and heat transfer engineering in general, Organic chemicals, Radiation protection, Radiation measurements, Raw materials for rubber and plastics, Non-ferrous metals, Protection of and in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of fluid flow, Refractories, Tobacco, tobacco products and related equipment, Noise with respect to human beings, Surface treatment and coating, Graphic technology, Semiconducting materials.

RU-GOST R, Sample preparation and measurement

GOST R 52482-2005 Food common salt. Sampling and sample preparation. Determination of organoleptic properties
GOST R EN 13804-2010 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
GOST R ISO 14284-2009 Steel and iron. Sampling and preparation of samples for determination of chemical composition
GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
GOST R ISO 16000-11-2009 Indoor air. Part 11. Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage ofsamples and preparation of test specimens
GOST 26929-1994 Raw material and food-stuffs. Preparation of samples. Decomposition of organic matters for analysis of toxic elements
GOST 26929-1986 Raw material and food-stuffs. Preparation of samples. Decomposition of organic matters for analysis of toxic elements
GOST ISO 3759-2013 Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
GOST R 8.824-2013 State system for ensuring the uniformity of measurements. General requirements for the competence of reference material producers
GOST ISO 17511-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
GOST 30642-1999 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content
GOST R ISO 389-7-2011 State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 7. Reference threshold of hearing under free-field and diffuse-field listening conditions
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials
GOST R ISO 11133-1-2008 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Part 1. General guidelines on quality assurance for the preparation of culture media in the laboratory

Indonesia Standards, Sample preparation and measurement

SNI 13-6717-2002 Manual for preparing test speciment from aggregate samples
SNI 7728-2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
SNI 03-6838-2002 Manual for test specimen preparation - compaction of asphalt mixture sample using a gyratory compactor

Taiwan Provincial Standard of the People's Republic of China, Sample preparation and measurement

CNS 14917-2005 Method of preparing and testing specimens from shotcrete test panels

American Society for Testing and Materials (ASTM), Sample preparation and measurement

ASTM C1799/C1799M-19 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
ASTM C50-00(2006) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM C50-00 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM D4543-04 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM F1843-09 Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C1140/C1140M-11(2019) Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D346/D346M-11 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D346/D346M-11(2019)e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D5139-90(2001) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM E401-70(1989)e1 Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
ASTM D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM C999-17 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
ASTM E1644-04 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
ASTM E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D5139-12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM E1728-02 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM F1843-97 Standard Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements, on Membrane Switch Overlays
ASTM F1843-97(2002) Standard Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements, on Membrane Switch Overlays
ASTM E877-08 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition
ASTM F418-77(1996)e1 Standard Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements
ASTM F1843-15 Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
ASTM C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM D4204-06 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D3975-93(2008) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D3975-93(2014) Standard Practice for Development and Use 40;Preparation41; of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM C1234-98 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM C1234-98(2004) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM C1234-11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
ASTM E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM D421-85(2002) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM E1726-01 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM D421-85(1998) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM E877-93(1998) Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials
ASTM E877-21 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM D6925-03 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D2664-95a Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM E3331-22a Standard Test Method for Measuring Target Modulus Using Light Weight Deflectometer (LWD) on Compacted Proctor Mold Samples
ASTM D1997-91(2008) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D1997-91(2008)e1 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D1997-13 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM E716-16(2021) Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E716-16(2021)e1 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E1306-11 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM D5628-96 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-18 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM E1645-01 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-94 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2016)e1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM B982-12 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis
ASTM ISO/ASTM 51204-02 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ASTM ISO/ASTM51204-02 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D5887-04 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM B982-14 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM B982-14e1 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM D6800-02(2007)e1 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
ASTM D6800-02 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
ASTM D7859-13e1 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D1990-14 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
ASTM D6925-06 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7687-23 Red Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration (Standard + Redline PDF Bundle)
ASTM D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D5887/D5887M-20 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-22 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-23 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887-09 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D4239-02 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D4239-11 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
ASTM D4239-13 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D5762-11 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D4309-96 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM D4309-02 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM D5887-08 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-22a Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-16 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM C824-91(1996) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM C824-91(2015) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
ASTM D4239-05 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D4239-14e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D5762-12(2017) Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM F3538-22 Standard Test Method for Measuring Heat Transmission Through Flame-Resistant Materials for Clothing in Flame Exposure Using a Cylindrical Specimen Holder
ASTM E2965-15 Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2965-16 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample preparation and measurement

GB/T 2389-2006 Reactive dyes. Determination of relative content of hydrolised dye comparatively standard sample
GB/T 2389-2013 Reactive dyes.Determination of relative content of hydrolised dye comparatively standard sample
GB/T 2389-1980 Determination of relative content of hydrolyzed dye in reactive dyes and standards specimens
GB/T 17365-1998 Method of preparation for samples of metal and alloy in electron probe microanalysis
GB/T 18779.2-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification
GB/T 8628-2001 Textiles--Preparation,marking and measuring of fabric specimens and garments in tests for determination of dimensional change
GB/T 8628-2013 Textiles.Preparation,marking and measuring of fabric specimens and garments in tests for determination of dimensional change
GB/T 18779.2-2004 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieses and measuring equipment-Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification
GB/T 17739.2-2006 Microfilming of technical drawings and technical documents. Part 2: Quality criteria and control of 35mm silver gelatin microfilms
GB/T 21415-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of values assigned to calibrators and control materials
GB/T 42490-2023 Soil quality Determination of organic carbon content and carbon isotope ratio, total nitrogen content and nitrogen isotope ratio in soil and biological samples Stable isotope ratio mass spectrometry
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 18779.3-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty
GB/T 18779.3-2009 Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty
GB/T 18779.1-2002 Geometrical product specifications (GPS)-Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications
GB/T 18779.1-2022 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 1:Decision rules for verifying conformity or nonconformity with specifications

International Electrotechnical Commission (IEC), Sample preparation and measurement

IEC 62554:2011/AMD1:2017 Sample preparation for measurement of mercury level in fluorescent lamps
IEC 62554:2011+AMD1:2017 CSV Sample preparation for measurement of mercury level in fluorescent lamps
IEC 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps
IEC 62554:2017 Sample preparation for measurement of mercury level in fluorescent lamps

Association Francaise de Normalisation, Sample preparation and measurement

NF C71-554*NF EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps
NF C71-554/A1*NF EN IEC 62554/A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps
NF EN 62554:2012 Préparation des échantillons en vue de la mesure du niveau de mercure dans les lampes fluorescentes
NF EN IEC 62554/A1:2018 Préparation des échantillons en vue de la mesure du niveau de mercure dans les lampes fluorescentes
NF V03-009-2:2002 Produits alimentaires - Mesure de la radioactivité dans les denrées alimentaires - Partie 2 : guide pour la préparation des échantillons de denrées alimentaires - Obtention d'un échantillon pour essai
NF EN ISO 13632:2012 Liants pour peintures et vernis - Colophane - Échantillonnage et préparation des échantillons pour le mesurage de la couleur
NF X43-014:2017 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis
NF EN ISO 3759:2011 Textiles - Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions
XP ISO/TS 7821:2005 Tabac et produits du tabac - Préparation et constitution d'échantillons identiques à partir d'un même lot pour la conduite d'essais comparatifs portant sur la qualité des méthodes d'essai
NF G07-123*NF EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
NF X43-404-11*NF EN ISO 16000-11:2006 Indoor air - Part 11 : determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
NF E11-018:1996 Geometrical product specification (gps). Length measuring instruments. Calibraiton specimens for thread measurement. Plugs and rings with groove.
NF EN ISO 15193:2009 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Exigences relatives au contenu et à la présentation des procédures de mesure de référence
NF EN 12697-28:2020 Mélanges bitumineux - Méthodes d'essai - Partie 28 : préparation des échantillons pour la détermination de la teneur en liant, de la teneur en eau et de la granularité
NF G07-123:1995 Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change.
NF T75-636*NF EN 16521:2014 Cosmetics - Analytical methods - GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
NF V37-023:1983
XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
NF S92-019*NF EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
NF A05-213*NF EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
NF A81-305:1975 COVERED ELECTRODES FOR MANUAL ARC WELDING PREPARATION OF AN ALL WELD METAL SAMPLE FOR MEASURING DIFFUSIBLE HYDROGEN.
NF EN ISO 14253-5:2015 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 5 : incertitude liée aux essais de vérification des appareils de mesure indicateurs
NF EN 14469-2:2004 Pigments et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 2 : préparation des éprouvettes
NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
NF P98-857-2*NF EN 12274-2:2018 Slurry surfacing - Test methods - Part 2 : determination of residual binder content including preparation of samples
NF M60-780-4:1997 Nuclear energy. Measurement of radioactivity in the environment . Bioindicators. Part 4 : general guide for the preparation of samples.
NF EN ISO 14253-2:2011 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2 : lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de m...
NF P98-230-2:1993 Test relating to pavements. Preparation of materials bound with cementitious binders or aggregates mixtes. Part 2 : preparation by static compression of sands or fine grained soils specimens.
NF P98-818-28*NF EN 12697-28:2020 Bituminous mixtures - Test methods - Part 28 : preparation of samples for determining binder content, water content and grading
NF T20-081:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est connu.
NF S92-020*NF EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation
NF EN 12274-2:2018 Matériaux bitumineux coulés à froid - Méthode d'essai - Partie 2 : détermination de la teneur en liant résiduel y compris la préparation des échantillons
NF X43-904:2013 Air biomonitoring - Passive biomonitoring of the air quality using autochthonous lichens : from collecting to sample prepar
NF T20-082:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est inconnu.
NF EN ISO 18153:2004 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Traçabilité métrologique des valeurs de concentration catalytique des enzymes attribuées aux agents d'étalonnage et aux matériau...
NF EN ISO 21304-2:2021 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF P98-818-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28 : preparation of samples for determining binder content, water content and grading.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sample preparation and measurement

GB/T 23113-2017 Sample preparation for measurement of mercury level in fluorescent lamps

European Committee for Standardization (CEN), Sample preparation and measurement

EN 13804:2002 Foodstuffs - Determination of Trace Elements - Performance Criteria, General Considerations and Sample Preparation
EN 1067:2005 Adhesives - Examination and preparation of samples for testing
EN 1067:1997 Adhesives - Examination and Preparation of Samples for Testing
EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 377:1997 Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing ISO 377: 1997
EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011)
EN ISO 3759:1995 Textiles - Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change
EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
CEN EN ISO 3759:2008 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
EN ISO 20764:2003 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS)- Inspection by Measurement of Workpieces and Measuring Equipments - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification
EN ISO 17511:2021 In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples (ISO 17511:2020)
EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials ISO 17511:2003
CEN/TR 15131:2006 Thermal performance of building materials - The use of interpolating equations in relation to thermal measurement on thick specimens - Guarded hot plate and heat flow meter apparatus
CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials ISO 18153:2003
EN ISO 12624:2022 Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, sodium ions and pH (ISO 12624:2022)

Lithuanian Standards Office , Sample preparation and measurement

LST EN 13804-2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation
LST EN 1067-2006 Adhesives - Examination and preparation of samples for testing
LST EN 62554-2012 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011)
LST EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
LST 1437-2006 Bread and bakery products - Receiving - Preparation of samples, determination of organoleptic characteristics and mass
LST EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
LST EN ISO 17511:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
LST EN ISO 377:2000 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
LST EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011)
LST EN 16274-2012 Methods for analysis of allergens - Quantification of suspected fragrance allergens in consumer products - Step 1: GC analysis of ready-to-inject sample
LST EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
LST L ENV ISO 14253-2:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425
LST EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
LST EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
LST EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
LST EN 12697-28-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading

Danish Standards Foundation, Sample preparation and measurement

DS/EN 1067:2006 Adhesives - Examination and preparation of samples for testing
DS/EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps
DS/EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
DS/EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
DS/EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
DS/EN 16274:2012 Methods for analysis of allergens - Quantification of suspected fragrance allergens in consumer products - Step 1: GC analysis of ready-to-inject sample
DS/EN ISO 20764:2004 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
DS/EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 14253-2/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
DS/CEN/TR 15131:2006 Thermal performance of building materials - The use of interpolating equations in relation to thermal measurement on thick specimens - Guarded hot plate and heat flow meter apparatus
DS/EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading

AENOR, Sample preparation and measurement

UNE-EN 1067:2006 Adhesives - Examination and preparation of samples for testing
UNE-EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
UNE 53551-2:1991 RUBBER VULCANIZED. PREPARATION OF SAMPLES AND TEST PIECES. PART 2: CHEMICAL TESTS
UNE-EN ISO 13632:2013 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
UNE-EN ISO 17511:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
UNE-EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
UNE-EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011)
UNE-EN 16274:2013 Methods for analysis of allergens - Quantification of suspected fragrance allergens in consumer products - Step 1: GC analysis of ready-to-inject sample
UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
UNE 40248-4:1975 IN DYNAMOMETRY OF FLAT BUNDLES OF WOOL FIBRES BY MEANS OF A DYNAMOMETRE CLASSIC PROVIDED OF SPECIAL HOLDERS FOR PRESSLEY CLIPS. PREPARATION OF THE SAMPLE OUT OF THE DYNAMOMETRE.
UNE-EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
UNE-EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading.

Canadian General Standards Board （CGSB), Sample preparation and measurement

CGSB 2.11-94 METH 2-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Laboratory Preparation of Samples

European Committee for Electrotechnical Standardization（CENELEC）, Sample preparation and measurement

EN 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps

ES-UNE, Sample preparation and measurement

UNE-EN IEC 62554:2011/A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by AENOR in February of 2012.)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
UNE-EN 12274-2:2020 Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples
UNE-EN 12697-28:2022 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading
UNE-EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

British Standards Institution (BSI), Sample preparation and measurement

BS EN IEC 62554:2011+A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
BS EN ISO 3759:2011 Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials
BS EN 12287:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Description of reference materials
BS EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
BS EN 13804:2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation
BS EN 16521:2014 Cosmetics. Analytical methods. GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
BS EN 12274-2:2018 Tracked Changes. Slurry surfacing. Test methods. Determination of residual binder content including preparation of samples
19/30378312 DC BS ISO 21151. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for international harmonization protocols establishing metrological traceability of values assigned to calibrators and human samples
BS EN ISO 3759:2008 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN ISO 16000-11:2006 Indoor air - Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
PD ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials. Their development and application
BS 6049-1:1981 British Standard Methods of test for tea - Part 1. Preparation of ground sample of known dry matter content
BS 6049-1:1980 Methods of test for tea. Preparation of ground sample of known dry matter content
BS ISO 11338-2:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sample preparation, clean-up and determination
BS EN 12697-28:2020 Tracked Changes. Bituminous mixtures. Test methods. Preparation of samples for determining binder content, water content and grading
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on measurement uncertainty statements
BS 2000-512:2005 Methods of test for petroleum and its products Part 512: Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method (Identical with IP 512:2005)
BS EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Preparation of samples for determining binder content, water content and grading
BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
18/30382713 DC BS EN 12697-28. Bituminous mixtures. Test methods. Part 28. Preparation of samples for determining binder content, water content and grading

RO-ASRO, Sample preparation and measurement

STAS SR ISO 8358:1991 Solid fertilizers. Preparation of sampies for chemical and physical analysis
STAS 2213/2-1984 SWEETS Rules for quality control and preparation ol samples for testing
STAS SR ISO 7764 Iron ores - Preparation of predried test samples for chemical analysis
STAS SR EN 196-7-1995 Methods of testing cement. Methods of taking and preparing samples of cement
STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS SR 13329-1996 Air quality. Fallout. The collection and preparation of samples for evaluating radioactive contamination

ZA-SANS, Sample preparation and measurement

SANS 5983:2000 Preparation of test specimens for moisture content determination in timber and timber products
SANS 5983:2008 Preparation of test specimens for moisture content determination in timber and timber products
SANS 3759:2008 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

UY-UNIT, Sample preparation and measurement

PT-IPQ, Sample preparation and measurement

NP EN 12286-2000 In vitro diagnostic medical devices Measurement of quantities in samples of boilogical origin Presentation of reference measurement procedures
NP 2246-1988 Textiles Determination of dimensional change. Preparation, marking and measuring of fabric specimens and garments
NP 2137-1986
NP 4372-1999 Solid fuels Coals and cokes Determination of moisture in the analysis sample by the indirect gravimetric method (ASTMmethod)
NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method

German Institute for Standardization, Sample preparation and measurement

DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN EN ISO 13632:2012-10 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012); German version EN ISO 13632:2012
DIN EN ISO 1513:2010-10 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010); German version EN ISO 1513:2010
DIN EN ISO 16000-11:2006-06 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); German version EN ISO 16000-11:2006
DIN EN ISO 377:2017-09 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017); German version EN ISO 377:2017
DIN EN ISO 3759:2011-08 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011); German version EN ISO 3759:2011
DIN EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011); German version EN 62554:2011
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003)
DIN EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
DIN EN ISO 16000-11:2023-04 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023); German and English version prEN ISO 16000-...
DIN EN ISO 3759:2008 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2007); German version EN ISO 3759:2008
DIN EN 12697-28:2020-05 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading; German version EN 12697-28:2020
DIN EN IEC 62554:2018 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011 + A1:2017); German version EN 62554:2011 + EN IEC 62554:2011/A1:2018
DIN EN 12274-2:2018 Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples
DIN EN 12274-2:2018-05 Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples; German version EN 12274-2:2018
DIN ISO/TS 14253-3:2008 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002); German version CEN ISO/TS 14253-3:2007
DIN EN 17087:2019 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
DIN EN 17087:2017 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content; German and English version prEN 17087:2017
DIN EN ISO 18153:2003-11 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003); German version EN ISO 181...
DIN EN 14469-2:2004-08 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004
DIN EN ISO 7625:2013-03 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012); German version EN ISO 7625:2012
DIN EN 12697-28:2020 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading
DIN EN ISO 14253-2:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
DIN EN ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011); German version EN ISO 3759:2011
DIN EN 16521:2014 Cosmetics - Analytical methods - GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection; German version EN 16521:2014
DIN EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009); English version of DIN EN ISO 15193:2009-10
DIN EN ISO 21304-2:2021-04 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
DIN EN ISO 18857-1:2007-02 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005); German version EN ISO 18857-1:2006
DIN 58932-1:2023-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, influence quantities, interference factors; Text in German and English
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007
DIN 50451-5:2010 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 5: Guideline for the selection of materials and testing of their suitability for apparatus for sampling and sample preparation for the determination of t

International Organization for Standardization (ISO), Sample preparation and measurement

ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO/FDIS 16000-11:2023 Indoor air — Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 3759:1976 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 3759:2007 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 3759:2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 3759:1984 Textiles; Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 3759:1994 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 16000-11:2006 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
ISO 2418:2023|IULTCS/IUP 2 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
ISO 21151:2020 In vitro diagnostic medical devices — Requirements for international harmonisation protocols establishing metrological traceability of values assigned to calibrators and human samples
ISO/DIS 16000-11 Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
ISO 2418:2023 | IULTCS/IUP 2 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
ISO 3759:1994/Cor 1:1999 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change; Technical corrigendum 1
ISO 3759:1994/Cor 2:2004 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change; Technical Corrigendum 2
ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials - Their development and application
ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9226:1992 Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
ISO 8916:1988 Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique
ISO 14253-2:2011/cor 1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica
ISO/TR 7821:1982 Tobacco; Preparation and constitution of identical samples from the same lot (Code of practice, for collaborative studies for evaluating methods of test)
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 12624:2011 Thermal insulating products for building equipment and industrial installations.Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

Group Standards of the People's Republic of China, Sample preparation and measurement

T/SXHK 003-2019 Quality inspection requirements for product design models and 3D drawings

Japanese Industrial Standards Committee (JISC), Sample preparation and measurement

JIS M 8082:1999 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content
JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS M 8082 AMD 1:2015 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content (Amendment 1)
JIS M 8108:2008 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution
JIS K 6920-2:1996 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6928-2:1998 Plastics -- Saturated polyesters (SP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

ES-AENOR, Sample preparation and measurement

UNE 53-551 Pt.2-1991
UNE 53-551 Pt.1-1991 Rubber vulcanized. Preparation of samples and test pieces. Part 1:Physical test

HU-MSZT, Sample preparation and measurement

PL-PKN, Sample preparation and measurement

PN A75101-09-1990 Fruit and vegetable products Preparation of samples and testingmethods Determination of ethanol content
PN A75101-10-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of chloride content
PN A75101-12-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of carotenoids and /3-carotene content
PN A75101-03-1990 Fruit and vegetable products -- Preparation of samples and physical and chemical test methods -- Determination of dry matter content by gravimetric method
PN A75101-26-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of formic acid content
PN A75101-24-1990 Fruit and vegetable products Preparation ot' samples and testing methods Determination of benzoic acid content
PN A75101-25-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of sorbic acid Content
PN A79120-06-1990 Wines and meads Preparation of samples and testing methods Determination of sugar content
PN A79120-07-1990 Wines and meads Preparation of samples and testing methods Determination of total acidity content
PN A75101-11-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of ascorbic acid conten
PN A75101-17-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of organie impurities content
PN A79120-04-1990 Wines and meads Preparation of samples and testing methods Determination of ethanol content
PN A75101-23-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of total sulphur dioxide content
PN A79120-09-1990 Wines and meads Preparation of samples and testing methods Determination of ash content
PN A79120-11-1990 Wines and meads Preparation of samples and testing methods Determination of sorbk acid content
PN A79120-12-1990 Wines and meads Preparation of samples and testing methods Determination of chlorides content
PN A75101-08-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of total ash content and its alkalinity
PN A75101-20-1990 Fruit and vegetable products Preparation of samples and testingmethods Determination of starch content in dry pomace
PN A79120-10-1990 Wines and meads Preparation of samples and testing methods Determination of sulphur dioxide content
PN A75101-07-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of sugar content and nonsugar extract
PN A75101-18-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of minera? impurities content
PN A75101-15-1990 Fruit and vegetable products Preparation of camples and testing methods Determination of net weight and drained weight of canned fruits and yegetables
PN A75105-1985 Fruit and vegetable products Determination of net weight and drained weight of canned fruits and yegetables
PN A79120-01-1990 Wines and meads Preparation of samples and testing methods General principles and range of standard
PN A79120-05-1990 Wines and meads Preparation of samples and testing methods Determination of total extract and non-sugar extract content

YU-JUS, Sample preparation and measurement

JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties

Professional Standard - Nuclear Industry, Sample preparation and measurement

EJ/T 428-1989 General regulations for soil sample collection and preparation in environmental nuclear radiation monitoring
EJ 575-1991 Technical requirements for calibration and management of measurement and test equipment used in nuclear power plants

Standard Association of Australia （SAA）, Sample preparation and measurement

AS 1289.1.3.1:1999 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Undisturbed samples - Standard method
AS 2891.2.1:1995 Methods of sampling and testing asphalt - Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory
AS 3988:1991 Copper, lead, zinc, gold and silver ores - Guide to sample preparation for the determination of gold
AS/NZS 2512.2:1998 Methods of testing protective helmets Method 2: General requirements for the conditioning and preparation of test specimens and laboratory conditions

KR-KS, Sample preparation and measurement

KS M ISO 2466-2017 Potassium hydroxide for industrial use — Sampling — Test sample — Preparation of the main solution for carrying out certain determinations
KS K ISO 3759-2019 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
KS I ISO 16000-11-2020 Indoor air ― Part 11: Determination of the emission of volatile organic compounds from building products and furnishing ―Sampling, storage of samples and preparation of test specimens
KS D ISO 7625-2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625-2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content

Korean Agency for Technology and Standards (KATS), Sample preparation and measurement

KS B ISO 14253-1:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
KS K ISO 3759:2019 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
KS P ISO 17511-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values assigned to calibrators and control materials
KS B ISO 14253-2:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS B ISO 14253-2:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS B ISO 14253-2:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS K ISO 3759:2007 Textiles-Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
KS K ISO 3759:2014 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
KS I ISO 16000-11:2004 Indoor air－Part 11：Determination of the emission of volatile organic compounds－Sampling, storage of samples and preparation of test specimens
KS I ISO 16000-11:2020 Indoor air ― Part 11: Determination of the emission of volatile organic compounds from building products and furnishing ―Sampling, storage of samples and preparation of test specimens
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS C IEC 60619-2015(2020) Electrically operated food preparation appliances — Methods for measuring the performance
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS F 2341-2022 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS D ISO 7625:2010 Sintered metal materials, excluding hardmetals-Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625:2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625:2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS M ISO 14526-2:2007 Plastics-Phenolic powder moulding compounds(PF-PMCs)-Part 2:Preparation of test specimens and determination of properties
KS M ISO 14528-2:2008 Plastics－Melamine-formaldehyde powder moulding compounds(MF-PMCs)－Part 2：Preparation of test specimens and determination of properties
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS P ISO 15194-2014(2019) In virto diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation

未注明发布机构, Sample preparation and measurement

BS EN ISO 16000-11:2006(2010) Indoor air — Part 11 : Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
DIN EN ISO 377:1997 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing
BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
BS EN 50263:2000 Electromagnetic compatibility ( EMC ) - Product standard for measuring relays and protection equipment
BS EN ISO 15194:2009(2016) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation

CENELEC - European Committee for Electrotechnical Standardization, Sample preparation and measurement

EN IEC 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps (Incorporates Amendment A1: 2018)
EN 50263:1999 Electromagnetic Compatibility (EMC) Product Standard for Measuring Relays and Protection Equipment

US-CFR-file, Sample preparation and measurement

CFR 40-1065.1107-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1107:Sample media and sample system preparation; sample system assembly.
CFR 7-75.42-2014 Agriculture. Part75:Regulations for inspection and certification of quality of agricultural and vegetable seeds. Section75.42:Sampling and sealing.
CFR 9-318.4-2013 Animals and Animal Products. Part318:Entry into official establishments; reinspection and preparation of products. Section318.4:Preparation of products to be officially supervised; responsibilities of official establishments; plant operated quality contr

CEN - European Committee for Standardization, Sample preparation and measurement

EN ISO 3759:2008 Textiles - Preparation@ marking and measuring of fabric specimens and garments in tests for determination of dimensional change
PREN 17087-2017 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
EN 17087:2019 Construction products: Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
PREN 12697-28-2018 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content@ water content and grading

Professional Standard - Agriculture, Sample preparation and measurement

空气和废气监测分析方法 4.1.4-2003 Part 4 Precipitation Monitoring Chapter 1 Layout, Sampling and Quality Assurance 4 Preservation and Processing of Precipitation Samples

国家市场监督管理总局、中国国家标准化管理委员会, Sample preparation and measurement

GB/T 17739.2-2021 Microfilming of technical drawings and other drawing office documents—Part 2：Quality criteria and control of 35mm silver gelatin microfilms
GB/T 18779.4-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
GB/T 18779.6-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
GB/T 17934.1-2021 Graphic technology—Process control for the production of half-tone colour separations, proof and production prints—Part 1: Parameters and measurement methods

Association of German Mechanical Engineers, Sample preparation and measurement

VDI 5582-2011 Preparation and cleaning of mould inserts and specimens to ensure reliable quality control measurements in the production chain of precision glass moulding

Institute of Electrical and Electronics Engineers (IEEE), Sample preparation and measurement

IEEE 498-1990 Requirements for the calibration and control of measuring and test equipment used in nuclear facilities
IEEE/ANSI C63.19-2019 American National Standard -- Methods of Measurement of Compatibility Between Wireless Communications Devices and Hearing Aids
ANSI C63.19-2019 American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids - Redline

API - American Petroleum Institute, Sample preparation and measurement

API MPMS 8.3-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (First Edition; ASTM D5854)
API MPMS 8.3 ERTA-1996 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products Errata (First Edition)
API MPMS 8.2-1983 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products (First Edition; ASTM D4177)
API MPMS 8.2-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products (Second Edition; ASTM D4177)
API MPMS 8.1-2013 Manual of Petroleum Measurement Standards Chapter 8.1 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products (FOURTH EDITION)
API MPMS 14.1-2016 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 1-Collecting and Handling of Natural Gas Samples for Custody Transfer (SEVENTH EDITION)

American National Standards Institute （ANSI), Sample preparation and measurement

BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)

IPC - Association Connecting Electronics Industries, Sample preparation and measurement

IPC A-22-1991 Test Pattern Artwork & Sample Preparation for Underwriters? Laboratories Standard U.L. 796 and U.L. 746

AT-ON, Sample preparation and measurement

ONORM C 9430-1982 Testing of Elastomers;Directives for the preparation of test samples for testing of elastomers and tissues covered with elastomers
OENORM EN ISO 14253-2:2021 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
ONORM DIN 55928-4 Beib.1-1992 Protection of steel structures from corrosion by organic and metallic coatings - Preparation and testing of surfaces - Photographic Standards

Professional Standard - Medicine, Sample preparation and measurement

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

国家能源局, Sample preparation and measurement

NB/T 34057.1-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 1: Preparation of standard samples

Professional Standard - Chemical Industry, Sample preparation and measurement

HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

GOSTR, Sample preparation and measurement

GOST EN 16274-2018 Perfume and cosmetic products. Methods for analysis of allergens. Quantification of suspected fragrance allergens in consumer products. Step 1. GC analysis of ready-to-inject sample
GOST R 58889-2020 Engineering surveying. Requirements to field documentation maintenance and preparation at driving and sampling of engineering-geological workings

Liaoning Provincial Standard of the People's Republic of China, Sample preparation and measurement

DB21/T 2072-2013 Preparation of reagents for chemical analysis of aluminum silicate refractory materials Sample decomposition and gravimetric determination of silicon dioxide

CU-NC, Sample preparation and measurement

NC 40-161-1989 Manufacturing and Textile Industry. Preparation, Marking and Measurement of Fabrics and Garments Manufactured for Dimensional Variation Tests