ZH
RU
ES

The peak of carbon in the material

The peak of carbon in the material, Total:500 items.

In the international standard classification, The peak of carbon in the material involves: Environmental protection, Inorganic chemicals, Testing of metals, Refractories, Products of the textile industry, Construction materials, Materials and articles in contact with foodstuffs, Non-ferrous metals, Organic chemicals, Reinforced plastics, Beverages, Materials for the reinforcement of composites, Welding, brazing and soldering, Fertilizers, Products of the chemical industry, Plastics, Ceramics, Materials for aerospace construction, Petroleum products in general, Fuels, Waxes, bituminous materials and other petroleum products, Ferrous metals, Air quality, Aerospace engines and propulsion systems, Electrical accessories, Rubber, Domestic, commercial and industrial heating appliances, Protection of and in buildings, Coatings and related processes used in aerospace industry, Aerospace fluid systems and components, Raw materials for rubber and plastics, Wood-based panels, Coals, Analytical chemistry, Powder metallurgy, Packaging materials and accessories, Rubber and plastics products, Occupational safety. Industrial hygiene, Road engineering, Leather technology, Electronic component assemblies, Mechanical structures for electronic equipment, Power transmission and distribution networks, Corrosion of metals, Pipeline components and pipelines, Wastes, Paper and board, Non-destructive testing, Road vehicles in general, Glass, Magnetic materials.

Group Standards of the People's Republic of China, The peak of carbon in the material

T/CAQI 325-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/NAIA 0222-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/YNIA 019-2023 Bio-based carbon test of nonwovens
T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method

Jiangsu Provincial Standard of the People's Republic of China, The peak of carbon in the material

DB3212/T 1133-2023 A guide to the application of quality infrastructure in peak carbon neutrality

Hunan Provincial Standard of the People's Republic of China, The peak of carbon in the material

DB43/T 2656-2023 Guidelines for corporate carbon peak and carbon neutrality based on ESG evaluation

German Institute for Standardization, The peak of carbon in the material

DIN 51939:2004 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN 51926:2016-08 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51933:2012-12 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51926:2009 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51926:2016 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51910:2020-12 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51914:2020-12 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 51914:2009 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 51933:2012 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN CEN/TS 16375:2013-03*DIN SPEC 10791:2013-03 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method; German version CEN/TS 16375:2013
DIN 51922:2016-08 Testing of carbonaceous materials - Determination of ash value - Binding and impregnating materials
DIN 51905:2014-09 Testing of carbonaceous materials - Determination of coking value - Binding and impregnating materials
DIN 51079-1:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
DIN 51909:1998 Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN 51909:2009-05 Testing of carbonaceous materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN 51916:1987 Testing of carbon materials; determination of apparent density after tamping; solid materials
DIN 51916:2012 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN CEN/TS 13130-17:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
DIN 51075-3:1982 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content
DIN 51906:2014-09 Testing of carbonaceous materials - Determination of matter insoluble in toluene - Binding and impregnating materials
DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
DIN EN 14397-2:2004-09 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials; German version EN 14397-2:2004
DIN EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999); German version EN ISO 14852:2004
DIN 51920:2020 Testing of carbonaceous materials - Determination of the Mettler softening point - Binding and impregnating materials
DIN 51920:2020-12 Testing of carbonaceous materials - Determination of the Mettler softening point - Binding and impregnating materials
DIN 52025:2004 Testing of carbonaceous materials - Determination of the Kraemer-Sarnow softening point
DIN 52027:2003-11 Testing of carbonaceous materials - Distillation of refined coal tars
DIN CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2009 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51075-5:1982 Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content
DIN 51075-2:1984 Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51921:2014-09 Testing of carbonaceous materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN 51911:2020 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 4862:2019-04 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
DIN EN ISO 17556:2019-09 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019); German version EN ISO 17556:2019
DIN 51912:1998 Testing of carbon materials - Determination of hydrogen content - Solid matters
DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51936:2016-08 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN EN ISO 19679:2020-11 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020); German version EN ISO 19679:2020
DIN EN ISO 23977-1:2022-01 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020); German version EN ISO 23977-1:2021
DIN EN ISO 14852:2021-10 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021); German version EN ISO 14852:2021
DIN EN ISO 22526-2:2022-01 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO<(Index)2> removed from the air and incorporated into polymer molecule (ISO 22526-2:2020); German version EN ISO 22526-2:2021
DIN 51079-2:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
DIN 51075-1:1982 Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content
DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51088:2007 Testing of ceramic raw and basic materials - Determination of mass fractions of metallic trace impurities in silicon carbide powders and granular silicon carbides by optical emission spectrometry and excitation in the DC arc
DIN EN 15979:2011-04 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation; German version EN 15979:2011
DIN EN 16718:2016 Wood and wood-based products - Dosage of the total organic carbon (TOC) in wood and wood based products
DIN EN 16718:2016-02 Wood and wood-based products - Dosage of the total organic carbon (TOC) in wood and wood based products; German version EN 16718:2015
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 51907:2013-12 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN EN 14397-1:2010-07 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers; German version EN 14397-1:2010
DIN EN ISO 22526-2:2022 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020); German version EN ISO 22526-2:2021
DIN EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019)
DIN EN ISO 19679:2018 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2016)
DIN 51918:2012 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN 51918:2018 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water; English version of DIN EN 15704:2009-06
DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN 51907:2013 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN ISO 14852:2020 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO/DIS 14852:2020); German and English version prEN ISO 14852:2020

Korean Agency for Technology and Standards (KATS), The peak of carbon in the material

KS D 1780-1993 General rules for determination of carbon in metallic materials
KS D 1780-2016 General rules for determination of carbon in metallic materials
KS K 0939-2015 Geosynthetic barriers－Characteristics required for use in transportation infrastructure
KS L 3410-1995 Chemical analysis for high purity carbon materials
KS M ISO 5931-2003(2018)
KS L 3416-2006 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS L 3416-2016 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS L 3416-2016(2021) Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS M ISO 17556:2020 Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 17556:2015 Plastics－Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 14852-2009(2019) Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium－Method by analysis of evolved carbon dioxide
KS F 4708-2018 Standard specification for basic magnesium carbonate heat insulating materials
KS M ISO 14422:2004 Carbonaceous materials used in the production of aluminium－Cold-ramming paste－Methods of sampling
KS M 3072-2008 Testing method for colour fastness of plastics upon exposure to light of the carbon arc
KS M ISO 12979:2004 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction
KS M 3707-2002 TESTING METHODS FOR CARBON FIBER CONTENT AND VOID CONTENT OF CARBON FIBER REINFORCED PLASTICS
KS F 2610-2007 Measuring method of carbon dioxide permeability for building materials
KS M ISO 8004-2003(2018)
KS M ISO 11412-2004(2009) Carbonaceous materials for the production of aluminium－Calcined coke－Determination of water content
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS F 2511-2007(2017) Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS F 2511-2002 Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS F 2511-1982 Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS D 1777-1993 General rules for determination of hydrogen in metallic materials
KS D 1779-1993 General rules for determination of sulfur in metallic materials
KS D 1777-2016 General rules for determination of hydrogen in metallic materials
KS M ISO 14425:2004 Carbonaceous materials used in the production of aluminium&##1051365; Cold-ramming pastes&##1051365;Determination of volatile-matter content of unbaked pastes
KS M ISO 14425:2013 Carbonaceous materials used in the production of aluminium􀫥 Cold-ramming pastes􀫥Determination of volatile-matter content of unbaked pastes
KS M ISO 12979-2004(2019) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction

Japanese Industrial Standards Committee (JISC), The peak of carbon in the material

JIS Z 2615:1996 General rules for determination of carbon in metallic materials
JIS Z 2615:2009 General rules for determination of carbon in metallic materials
JIS Z 2615:2015 General rules for determination of carbon in metallic materials
JIS Z 2615 AMD 1:2006 General rules for determination of carbon in metallic materials (Amendment 1)
JIS H 1427:1996 Methods for determination of carbon in nickel materials for electron tubes
JIS R 2011:1998 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
JIS R 2011:2007 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
JIS K 6955:2017 Plastics -- Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
JIS R 7651:2007 Measurement of lattice parameters and crystallite sizes of carbon materials
JIS K 6951:2000 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
JIS R 2015:2007 Methods for chemical analysis of boron carbide raw materials for refractory products
JIS A 9401:2007 Recycled plastics medial strip block
JIS Z 2616:1996 General rules for determination of sulfur in metallic materials

Liaoning Provincial Standard of the People's Republic of China, The peak of carbon in the material

DB21/T 2071-2013 Determination method of total carbon in magnesia carbonaceous refractories

CU-NC, The peak of carbon in the material

NC 04-20-1968 Determination of total carbon in ferrous materials
NC 04-69-1985 Materials Testing. Cast Iron and Steel. Determination of Carbon by Columbiometric Method

AGMA - American Gear Manufacturers Association, The peak of carbon in the material

92FTM6-1992 Comparison of Carburized Gear Materials in Pitting

GOSTR, The peak of carbon in the material

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 57831-2017 Polymer composites. The methods of determining the size and aspect ratio of carbon composites fragments destined for recycling

RO-ASRO, The peak of carbon in the material

STAS 8599-1970 REFRACTORY MATERIALS Determination of the resistance to disintegration in carbon monoxide medium
STAS 9281/3-1973 SILICON CARBIDE REFRACTORIES DeLerniinalion of free carbon
STAS 9281/4-1991 Carborundic refractory materials. Silicon carbide content determination
STAS 10054-1975 PLASTICS Determination of the acetone soluble matter (resin content) of phenolic moulding materials
STAS 9281/2-1991 Carborundic refractory materials. Total carbon content determination
STAS 9281/6-1974 SILICON CARBIDE REFRACTORIES Determination of aluminium Irioxyde content
STAS 9281/1-1973 SILICON CARB1DI- HEFRACTOIUES General directions for carrying out chemical analysis.

British Standards Institution (BSI), The peak of carbon in the material

DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS EN ISO 22526-2:2021 Plastics. Carbon and environmental footprint of biobased plastics - Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Method for liming materials
BS EN ISO 23977-1:2021 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater - Method by analysis of evolved carbon dioxide
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
18/30363889 DC BS ISO 22526-2. Plastics. Carbon and environmental footprint of biobased plastics. Part 2. Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS ISO 23977-1:2020 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:2018 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
20/30373037 DC BS ISO 23071. Refractory products. Determination of reduced species in carbon containing refractories by XRD
BS ISO 14428:2019 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS 6043-4.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
BS EN 10036:1991 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
BS EN 10036:1991(1999) Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
BS 6043-2.6:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
BS EN 12877-1:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - General introduction
BS ISO 8007-3:2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content
BS EN ISO 19679:2020 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
BS EN 16718:2015 Wood and wood based products. Dosage of the total organic carbon (TOC) in wood and wood based products
BS ISO 19679:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
20/30399388 DC BS ISO 23977-1. Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1. Method by analysis of evolved carbon dioxide
BS EN 12877-4:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by two-roll milling
BS 6043-1.11:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture
BS 6043-2.16:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
BS ISO 15379-1:2019 Carbonaceous materials for the production of aluminium. Cathode block materials - Determination of the expansion due to sodium penetration with application of pressure
BS EN 12877-2:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by injection moulding
BS EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by oven test
BS EN ISO 17556:2019 Tracked Changes. Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS EN 15704:2008 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material
BS EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. Erosion test method for metal materials with surface processing
20/30408882 DC BS EN ISO 14852. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:2021 Tracked Changes. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
DD ENV 13797-2001 Corrosion protection. Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production. Materials and test methods. Guidelines
BS EN 62739-1:2013 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. Erosion test method for metal materials without surface processing
19/30399400 DC BS EN ISO 19679. Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
BS PD ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
BS EN ISO 17556:2012 Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS EN 682:2002 Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS 6043-1.2:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method)
BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
BS 6043-1.6:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value
BS EN 10330:2003 Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit
BS ISO 15379-1:2015 Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration with application of pressure

Association Francaise de Normalisation, The peak of carbon in the material

NF EN 16718:2016 Produits de préservation du bois et matériaux à base de bois - Dosage du carbone organique total (COT) dans les bois et matériaux à base de bois
XP CEN/TS 13130-17:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 17 : détermination du chlorure de carbonyle dans les matières plastiques
NF EN ISO 22526-2:2021 Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie 2 : empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et incorporée dans les molécules de polymères
XP U44-186*XP CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
NF T51-798-2*NF EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2 : material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
XP D25-201-17*XP CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17 : determination of carbonyl chloride in plastics
NF B49-421:1990 Refractory products. Chemical analysis of aluminous, siliceous, silicon carbide, carbon and metallic silicon refractory products.
NF T51-802:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide.
NF EN ISO 14852:2021 Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux - Méthode par analyse du dioxyde de carbone libéré
NF T51-804*NF EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
NF EN ISO 17556:2019 Plastiques - Détermination de la biodégradabilité aérobie ultime des matériaux plastiques dans le sol par mesure de la demande en oxygène dans un respiromètre ou de la teneur en dioxyde de carbone libéré
NF T51-814*NF EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
NF EN ISO 23977-1:2021 Plastiques - Détermination de la biodégradation aérobie des matières plastiques exposées à l'eau de mer - Partie 1 : méthode par analyse du dioxyde de carbone dégagé
NF B40-676*NF EN ISO 12676:2003 Refractory products - Determination of resistance to carbon monoxide
NF T45-112:2009 Rubber compounding ingredients - Carbon black - Determination of tinting strength.
NF T45-112:1996 Rubber compounding ingredients. Carbon black. Determination of tinting strength.
NF T45-137:1990 Raw materials for the rubber industry. Determination of the pH of carbon black.
NF M03-032:1969 SOLID MINERAL FUELS. DETERMINATION OF CARBON AND HYDROGEN IN SOLID FUELS BY THE HIGH TEMPERATURE METHOD.
NF A06-301:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.
NF U44-179*NF EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
NF U44-173:2009 Fertilizers - Liming materials, liming materials-fertilizers and fertilizers - Determination of neutralizing value.
NF T51-802*NF EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF B51-200*NF EN 16718:2016 Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
NF T47-306/A1*NF EN 682/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
NF EN 14047:2003 Emballage - Détermination de la biodégradabilité aérobie ultime des matériaux d'emballage dans un milieu aqueux - Méthode par analyse du dioxyde de carbone libéré
NF C28-921:2003 Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit.

IT-UNI, The peak of carbon in the material

UNI 6073-1967
UNI F.A.50-1972
UNI 6878-1971
UNI 7411-1975
UNI 3677-1955
UNI EN 5-1979
UNI EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
UNI 4359-1959
UNI 7276-1974
UNI 6069-1967
UNI 5875-1966

American National Standards Institute （ANSI), The peak of carbon in the material

ANSI/ASTM D6260:1998 Test Method for Gravimetric Determination of Carbon Black in Nylon Materials
ANSI/ASTM C1179:2000 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ANSI/ASTM C769:2009 Test Method For Sonic Velocity In Manufactured Carbon And Graphite Materials For Use In Obtaining An Approximate Young S Modulus
ANSI/ASTM C886:2010 Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ANSI/ASTM D3349:2012 Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
ANSI/AWS A5.2/A5.2M:2007 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding

ES-AENOR, The peak of carbon in the material

RU-GOST R, The peak of carbon in the material

GOST 33846-2016 Polymer composites. Methods for determination of resins, fibers and voids in carbon composite
GOST 11930.1-1979 Hard-facing materials. Methods of carbon determination
GOST 30248-2013 Electrical carbon products. Electrical heating appliances made of carbon fiber materials. General specifications
GOST R 54254-2010 Carbon materials. Test method for thermal conductivity at room temperature
GOST 30248-1997 Electrical carbon products. Electrical heating appliances made of carban fibre materials. General specifications
GOST R 54253-2010 Carbon materials. Test method for linear thermal expansion coefficient
GOST 27939-1988 Carbonfibre composite EPAN. Specifications
GOST EN 14397-2-2014 Fertilizers and liming materials. Determination of carbon dioxide content. Part 2. Method for liming materials
GOST R ISO 6998-2017 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of coking value
PNST 532-2021 Space systems. Carbon-carbon and ceramic matrix composites. Determination of apparent density and of open porosity

未注明发布机构, The peak of carbon in the material

BS EN ISO 22526-2:2021(2022) Plastics — Carbon and environmental footprint of biobased plastics Part 2 : Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS EN ISO 23977-1:2021(2022) Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater Part 1 : Method by analysis of evolved carbon dioxide
BS ISO 8007-3:2003(2005) Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 3 : Sidewall blocks

ES-UNE, The peak of carbon in the material

UNE-EN ISO 22526-2:2022 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
UNE-EN ISO 14852:2022 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)
UNE-EN ISO 17556:2020 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019)
UNE-EN ISO 19679:2021 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
UNE-EN ISO 23977-1:2022 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
UNE-EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation (Endorsed by AENOR in March of 2011.)
UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN 16718:2016 Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
UNE 83705:2022 Repair materials testing. Accelerated determination of the resistance to carbonation provided by the coatings contemplated in standards UNE-EN 1504-1 and UNE-EN 1504-2 and the thickness of equivalent carbonated concrete.

HU-MSZT, The peak of carbon in the material

AENOR, The peak of carbon in the material

UNE 61030:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CARBON REFRACTORIES
UNE 61031:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF SILICA CARBIDE
UNE-CEN/TS 13130-17:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
UNE-EN 14397-2:2005 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
UNE-EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
UNE-EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
UNE 61014:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINOSE REFRACTORIES. REFRACTORY OF 43 TO 45 % IN ALUMINA
UNE-EN ISO 17556:2013 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)
UNE-EN ISO 14852:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999)

GM Europe, The peak of carbon in the material

GME QK 006100-1984

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The peak of carbon in the material

GB/T 12143.4-1992 Method for determination of carbondioxide in carbonated soft drink
GB/T 41638.2-2023 Carbon and environmental footprints of plastics Bio-based plastics Part 2: Carbon footprint of materials Amount (mass) of CO2 incorporated into polymer molecules from the air
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 9095-1988 Measurement on the carburizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T 32177-2015 Determination of boron oxide in refractory materials
GB/T 22047-2008 Plastics. Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
GB/T 9095-2008 Sintered ferrous materials,carburized or carbonitrided-Determination and verification of case-harding depth

Professional Standard - Ferrous Metallurgy, The peak of carbon in the material

YB/T 917-1997 Carbonaceous materials.Determination of vanadium content.Colorimetric method
YB/T 908-1997 Carbon materials.Determination of open porosity
YB/T 1428-1997 Carbon materials.Determination moisture in air-dried sample

American Society for Testing and Materials (ASTM), The peak of carbon in the material

ASTM C288-87(1997) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-20 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-87(2014) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-87(2002) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM D7662-15(2020) Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM C1179-91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-91(2005) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C288-87(2009) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C607-88(2000) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
ASTM C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
ASTM D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
ASTM C1179-91(2000) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-15 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM B663/B663M-16 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
ASTM D5805-00 Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches
ASTM C769-98(2005) Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young''s Modulus
ASTM C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C767-93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C831-98(2008) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C831-98(2013) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes?
ASTM C831-98(2017) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
ASTM C831-98(2017)e1 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
ASTM D3935-09 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D3935-94 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D3935-94(2001) Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D3935-02 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM C769-15(2020)e1 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
ASTM E777-87(2004) Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E777-87(1996) Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E1915-11 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM E1915-13 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM C454-83(1998) Standard Practice for Disintegration of Carbon Refractories by Alkali
ASTM F2191/F2191M-13(2020)e1 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM C454-10(2017) Standard Test Method for Disintegration of Carbon Refractories by Alkali
ASTM C454-10(2022) Standard Test Method for Disintegration of Carbon Refractories by Alkali
ASTM D3042-97 Standard Test Method for Insoluble Residue in Carbonate Aggregates
ASTM D1603-01 Standard Test Method for Carbon Black In Olefin Plastics
ASTM D1603-94 Standard Test Method for Carbon Black In Olefin Plastics
ASTM D1603-06 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D1603-14 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D7662-13 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7662-15 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM E1915-09 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM D6403-99(2004) Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM D6403-99 Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM D6403-99(2009) Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM D6403-99(2014) Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM B987/B987M-17 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
ASTM B987/B987M-17e1 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
ASTM F2191-02 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM C454-83(2007) Standard Practice for Disintegration of Carbon Refractories by Alkali
ASTM D1511-00 Standard Test Method for Carbon Black-Pellet Size Distribution
ASTM D1511-00e1 Standard Test Method for Carbon Black-Pellet Size Distribution
ASTM C454-83(2002) Standard Practice for Disintegration of Carbon Refractories by Alkali
ASTM F2191-02(2008) Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM D529-00 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
ASTM F2191/F2191M-13 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM C886-98(2015) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM D529-04 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
ASTM C886-21 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM E777-08 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D6405-99 Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2004) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2009) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2014) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D7662-10 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7662-11 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D305-84(2003) Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM E748-95 Standard Practices for Thermal Neutron Radiography of Materials

Danish Standards Foundation, The peak of carbon in the material

DS/CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
DS/CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
DS/EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
DS/EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
DS/ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by analysis of evolved carbon dioxide
DS/EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
DS/EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
DS/EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
DS/ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
DS/EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by analysis of evolved carbon dioxide (ISO 14852:2021)

CZ-CSN, The peak of carbon in the material

CSN 44 1357-1985 Solid fuels. Determination of carbon dioxide from carbonates
CSN 44 1357-1971 Determination of carbon dioxide in solid fuels
CSN EN 10 036-1993 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
CSN ON 34 6266-1964
CSN 37 5241-1976 Electrícal equipment in and on combustible materials
CSN 65 6243-1961 Contens of matorials ínsoluble in freezíng ixture F 12

European Committee for Standardization (CEN), The peak of carbon in the material

PD CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
PD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)
EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide
EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen
prEN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
EN 16718:2015 Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
EN ISO 22404:2021 Plastics - Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment - Method by analysis of evolved carbon dioxide (ISO 22404:2019)
EN 15704:2008 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
EN 10330:2003 Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit

Society of Automotive Engineers (SAE), The peak of carbon in the material

SAE AMS3611D-1994 Plastic Sheet, Polycarbonate General Purpose
SAE ARP4118A-2013 Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
SAE AMS3022D-2011 Reference Fluid For Testing Hydrocarbon Fuel Resistant Materials, 10% Aromatic Content
SAE AMS3138D-2007 Coating Materials, Fluorocarbon (FKM) Elastomeric
SAE AMS3022C-1994 Reference Fluid For Testing Hydrocarbon Fuel Resistant Materials, 10% Aromatic Content
SAE AS5729B-2023 O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL
SAE AMS3670/5D-2021 Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material
SAE AMS3892B-2005 Fibers, Carbon, Tow and Yarn For Structural Composites

International Organization for Standardization (ISO), The peak of carbon in the material

ISO 22526-2:2020 Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
ISO 18142:2014 Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
ISO 14852:2018 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
ISO 12979:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction
ISO 23071:2021 Refractory products — Determination of reduced species in carbon containing refractories by XRD
ISO 22404:2019 Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
ISO/CD 11713:2023 Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature
ISO 16574:2015 Determination of percentage of resolvable pearlite in high carbon steel wire rod
ISO 9406:1988 Carbonaceous materials for the production of aluminium; green coke; determination of volatile matter content by gravimetric analysis
ISO 9406:1995 Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis
ISO 17556:2003 Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
ISO 19679:2020 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
ISO 14852:1999/cor 1:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide; Technical Corrigendum 1
ISO/TS 14425:1999 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes

DE-VDA, The peak of carbon in the material

VDA 266-100-2012 Material testing in fuels

National Association of Corrosion Engineers (NACE), The peak of carbon in the material

NACE TM0192-1992 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments (Item No. 21222)

American Gear Manufacturers Association, The peak of carbon in the material

AGMA 92FTM6-1992 Comparison of Carburized Gear Materials in Pitting

Lithuanian Standards Office , The peak of carbon in the material

LST EN 14397-2-2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
LST EN 10036-2000 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
LST EN 15704-2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
LST EN 14397-1-2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
LST EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)
LST EN ISO 14852:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999)
LST EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)

KR-KS, The peak of carbon in the material

KS M ISO 17556-2020 Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS F 4708-2018(2023) Standard specification for basic magnesium carbonate heat insulating materials
KS M ISO 16010-2022 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids

AT-ON, The peak of carbon in the material

OENORM EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
ONORM S 2080-1-1999 Quality requirements for secondary raw materials - Paper
OENORM EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)

Canadian General Standards Board （CGSB), The peak of carbon in the material

CGSB 1-GP-71 METH 50.10-1980 Methods of Testing Paints and Pigments Pigment Analysis Carbon Dioxide in Carbonates

YU-JUS, The peak of carbon in the material

JUS B.D8.240-1982 Refractories. Chemical analysis silicon carbide production and raw materials
JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength

AR-IRAM, The peak of carbon in the material

IRAM-AAQTC B 135-10-1962

Association of German Mechanical Engineers, The peak of carbon in the material

VDI 3467-1998 Emission control - Production of carbon and electrographite materials
VDI 3467-2014 Emission control - Production of carbon and electrographite materials

PT-IPQ, The peak of carbon in the material

Professional Standard - Machinery, The peak of carbon in the material

JB/T 4107.7-1999 Chemical analyse method for electrical contact materials.Determination of carbon content in the silver - graphite ( Determine carbon content by the gas volumetry method)
JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
JB/T 4107.3-2014 Chemical analyse method for electrical contact materials.Part 3: Determination of carbon content in the silver-graphite
JB/T 8063.1-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products

PL-PKN, The peak of carbon in the material

PN H04157-1986 Refractory materials Chemical analysis of silicon carbide and silicon carbide containing products
PN-EN ISO 19679-2020-12 E Plastics--Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface--Method by analysis of evolved carbon dioxide (ISO 19679:2020)

North Atlantic Treaty Organization Standards Agency, The peak of carbon in the material

STANAG 1411-2006 STANDARD TO QUANTIFY THE CHARACTERISTICS OF CARBON DIOXIDE (CO2) ABSORBENT MATERIALS FOR DIVING APPLICATIONS

Professional Standard - Commodity Inspection, The peak of carbon in the material

SN/T 3652-2013 Food contact materials.Polymers.Determination of diphenyl carbonate in food simulants.High performance liquid chromatography(HPLC)
SN/T 2813-2011 Determination of extracts in melamine-formaldehyde resin, nylon resin and polycarbonate resin of polymer materials for export food contact materials

BE-NBN, The peak of carbon in the material

NBN-EN 10036-1992 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
NBN B 11-229-1995
NBN T 03-481-1984 Carbonaceous materials for the production of aluminium - Fitch for elec-trodes - Determination of content of quinoline-insoluble material
NBN T 03-480-1984 Carbonaceous materials for the production of aluminium - Pitch for elec-trodes - Determination of content of toluene-insoluble material
NBN T 03-489-1988 Carbonaceous materials used in the production of aluminium - Sampling from cathodic blocks and prebaked anodes - General
NBN T 03-488-1988 Carbonaceous materials used in the production of aluminium - Pitch for electrodes- Determination of ash

SE-SIS, The peak of carbon in the material

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

IN-BIS, The peak of carbon in the material

US-FCR, The peak of carbon in the material

FCR NE-F-11-2T-1985 ANALYTICAL CHEMISTRY METHODS FOR BORON CARBIDE ABSORBER MATERIAL

VE-FONDONORMA, The peak of carbon in the material

国家市场监督管理总局、中国国家标准化管理委员会, The peak of carbon in the material

GB/T 38292-2019 Determination of mercury in plastic materials
GB/T 38291-2019 Determination of lead in plastic materials
GB/T 38290-2019 Determination of cadmium in plastic materials
GB/T 38287-2019 Determination of hexavalent chromium in plastic materials

(U.S.) Ford Automotive Standards, The peak of carbon in the material

FORD WD953-2001 MATERIAL AND PERFORMANCE OF SCREWS FOR USE IN PLASTICS
FORD WSS-M98P14-A1-2021 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS
FORD WD954-2003 MATERIAL AND PERFORMANCE REQUIREMENTS FOR SCREWS USED IN THERMOPLASTIC MATERIALS
FORD WD 954-2009 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD FLTM BO 006-02-2001 DETERMINATION OF ASH CONTENT OF MOLDED MATERIALS

NZ-SNZ, The peak of carbon in the material

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

BELST, The peak of carbon in the material

STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements

GM North America, The peak of carbon in the material

GM GM9144P-2001 Resistance to Arcing or Charring of Dielectrically Embossed Materials

CEN - European Committee for Standardization, The peak of carbon in the material

PREN 12698-2005 Chemical analysis of nitride bonded silicon carbide refractories
EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 17556:2004 Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 19679:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide

(U.S.) Parachute Industry Association, The peak of carbon in the material

PIA-TEST METHOD-2611B-2007 NONFIBROUS MATERIALS IN COTTON, ENZYME METHOD
PIA-TEST METHOD-2611D-2014 NONFIBROUS MATERIALS IN COTTON, ENZYME METHOD

Jilin Provincial Standard of the People's Republic of China, The peak of carbon in the material

DB22/T 185-2018 Determination of total mercury in biological materials
DB22/T 184-2018 Determination of total arsenic in biological materials
DB22/T 184-2011 Determination of total arsenic in biological materials
DB22/T 185-2011 Determination of total mercury in biological materials

SAE - SAE International, The peak of carbon in the material

SAE PT-189-2018 Materials Technology Gaps in Metal Additive Manufacturing

CH-SNV, The peak of carbon in the material

SN EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)

Professional Standard - Aviation, The peak of carbon in the material

HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials

VN-TCVN, The peak of carbon in the material

TCVN 6530-13-2008 Refractiories.Test methods.Part 13: Determination of oxidation resistance of refractories containing carbon

廊坊市市场监督管理局, The peak of carbon in the material

DB1310/T 229-2020 Determination of metal element content in high-purity carbon materials by inductively coupled plasma optical emission spectrometry

Professional Standard - Automobile, The peak of carbon in the material

QC/T 941-2013 Test methods of mercury in automobiles materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The peak of carbon in the material

GB/T 34175-2017 Determination of sulfur in refractory products

American Society of Mechanical Engineers (ASME), The peak of carbon in the material

ASME STP-PT-017-2008 Properties for Composite Materials in Hydrogen Science

Standard Association of Australia （SAA）, The peak of carbon in the material

AS/NZS 2208:1996 Safety glazing materials in buildings