ZH
RU
ES

Voltage drop during discharge

Voltage drop during discharge, Total:500 items.

In the international standard classification, Voltage drop during discharge involves: Electrical engineering in general, Transformers. Reactors, Galvanic cells and batteries, Vocabularies, Electronic tubes, Power transmission and distribution networks, Electromagnetic compatibility (EMC), Aerospace electric equipment and systems, Cinematography, Electrical accessories, Electrical wires and cables, Television and radio broadcasting, Road vehicle systems, Electricity. Magnetism. Electrical and magnetic measurements, Power stations in general, Integrated circuits. Microelectronics, Insulating materials, Welding, brazing and soldering, Insulation, Capacitors, Components for electrical equipment, Radiation measurements, Horology, Resistors, Lamps and related equipment, Electrical equipment for working in special conditions, Construction technology, Electrical and electronic testing, Installations in buildings, Rotating machinery, Optoelectronics. Laser equipment, Electric traction equipment, Solar energy engineering, Energy and heat transfer engineering in general, Vacuum technology, Protection against electric shock, Acoustics and acoustic measurements, Switchgear and controlgear, Burners. Boilers, Non-destructive testing, Telecommunication systems, Railway rolling stock, Measurement of fluid flow, Aircraft and space vehicles in general, Valves, Components and accessories for telecommunications equipment, Nuclear energy engineering, Insulating fluids.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Voltage drop during discharge

GB/T 30137-2013 Power quality.Voltage dips and short interruptions
GB/T 25099-2010 Step-down power saving device on distribution networks
GB/T 17626.11-1999 Electromagnetic compatibility. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips, short interruptions and voltage variations immunity tests
GB 9420-1988 Voltage drop in the starter circuit
GB/T 22841-2008 Test specification for immunity to voltage dips and short interruptions of industrial machinery and electrical equipment
GB/T 14598.11-2011 Measuring relays and protection equipment.Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
GB/Z 18039.7-2011 Electromagnetic compatibility.Environment.Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
GB/T 17626.29-2006 Electromagnetic compatibility Testing and measurement techniques Voltage dips， short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 18481-2001 Power quality Temporary and transient overvoltages
GB/T 17626.34-2012 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase
GB/T 23642-2009 Electrical insulating materials and systems.Electrical measurement of partial discharges(PD) under short rise time and repetitive voltage impulses
GB/T 42001-2022 Altitude correction method for external insulation flashover voltage of high voltage power transmission projects
GB/T 17626.11-2023 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase
GB/T 9434-1988 Methods of measurement of gas discharge tubes for overvoltage protection
GB/T 1411-2002/IEC 61621-1997 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 1411-2002/IEC 61621:1997 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 1411-2002 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 42287-2022 High-voltage test techniques—Measurement of partial discharges by electromagnetic and acoustic methods
GB/T 7436-1987 Specifications of TDM equipment operating on analog telephone-type circuit for telegraph and lower-speed data
GB 7436-1987 Technical requirements for time-division multiplexing equipment for open telegraphy and low-speed data on analog telephone circuits
GB/T 9433-1988 General specification of gas discharge tubes for overvoltage protection
GB/T 17648-1998 Insulating liquids-Determination of the Partial Discharge Inception Voltage (PDIV)-Test procedure

National Metrological Technical Specifications of the People's Republic of China, Voltage drop during discharge

JJF(电子) 30802-2006 Specification for calibration of generators of voltage sag, short interruption and voltage change
JJF 1673-2017 Calibration Specification for Voltage Dips,Short Interruptions and Voltage Variations Test Generators
JJF 1658-2017 Calibration Specification for Loss-of-voltage Timers
JJF 1269-2010 Calibration Specification for IEPE Amplifiers

Military Standard of the People's Republic of China-General Armament Department, Voltage drop during discharge

GJB 9376-2018 Calibration procedures for voltage sag, interruption and voltage change generators
GJB 2870A-2021 Specification for drop-in electronic pressure gauges
GJB 2870-1997 Specification for drop-in electronic pressure gauges

Korean Agency for Technology and Standards (KATS), Voltage drop during discharge

KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
KS C 0272-1995 Electromagnetic compatibility-Testing and measurement techniques-Voltage dips,short interruptions and voltage variations immunity
KS C 3324-2002 High-voltage drop wires for pole transformer
KS C 3324-1982 High-voltage drop wires for pole transformer
KS C 9610-4-11-2020 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
KS C IEC 61000-4-11-2008(2013) Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
KS C IEC 61000-4-11:2008 Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
KS C 9610-4-11-2017 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
KS C 4804-1981 Discharge coils for high voltage power capacitors
KS C IEC TR 61000-2-8-2007(2017) Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61000-4-29:2014 Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
KS C 4804-1981(2021) Discharge coils for high voltage power capacitors
KS C IEC TR 61000-2-8-2007(2022) Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61000-2-8:2007 Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C 7615-1980(2010) LOW PRESSURE MERCURY GERMICIDAL DISCHARGE LAMPS
KS C IEC 61000-4-34:2014 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
KS C IEC 61000-4-34:2016 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
KS C IEC 61000-4-34-2016(2021) Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than
KS C 4804-1981(2016) Discharge coils for high voltage power capacitors
KS C IEC 60270:2006 High-voltage test techniques－Partial discharge measurements
KS C IEC 60099-6-2005(2020) Surge arresters－Part 6：Surge arresters containing both series and parallel gapped structures－Rated 52 kV and less
KS C IEC 61243-1-2016(2021) Live working－Voltage detectors－Part 1：Capacitive type to be used for voltages exceeding 1 kV a.c.
KS C IEC 60895:2003 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
KS C IEC 60099-6:2021 Surge arresters — Part 6: Surge arresters containing both series and parallel gapped structures — System voltage of 52 kV and less
KS C 8539-2005 Testing procedure of long discharge rate lead-acid batteries for photovoltaic systems
KS B 0083-2017 Measuring methods of low pressures by discharge and ionization vacuum gauges
KS C IEC 61621-2014(2019) Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges
KS A ISO 26:2003 Cinematography－Projector usage of 16 mm motion－picture films for direct front projection－Specifications
KS B 0083-2017(2022) Measuring methods of low pressures by discharge and ionization vacuum gauges
KS C IEC 61047:2003 D.C or a.c supplied electronic step-down convertors for filament Lamps-Performance requirements
KS C IEC 61047:2014 DC or AC supplied electronic step-down convertors for filament lamps — Performance requirements
KS C IEC 61621:2014 Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges
KS C IEC 60270:2020 High-voltage test techniques — Partial discharge measurements

RO-ASRO, Voltage drop during discharge

STAS 11200/496-1983 GRAPHICAL SYMBOL FOR HEAD LOWERING TIME PLUS SQUEEZE TIME (SPOT WELDING, PROJECTION WELDING, AND SEAM WELDING
STAS 11896-1980 LIFT TRUCKS WITH ELECTRO- HYDRAULIC LIFTING Typification
STAS 11200/454-1981 Graphical symbols GRAPHICAL SYMBOL FOR DROOPING VOLTAGE CHARACTERISTIC
STAS E 6669/5-1980 High-voltage tests PARTIAL D1SCHARGE MEASUREMENTS
STAS 3811-1963

German Institute for Standardization, Voltage drop during discharge

DIN 40763-2:1990 Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time
DIN 40763-2:1990-09 Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time
DIN EN IEC 61810-7-50:2022-10 All-or-nothing electrical relays - Tests and Measurements - Part 7-50: Momentary drop in supply voltage (IEC 94/581/CD:2021); Text in German and English / Note: Date of issue 2022-09-30
DIN EN 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004); German version EN 61000-4-11:2004
DIN IEC/TS 61934:2012-09*DIN SPEC 41934:2012-09 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses (IEC/TS 61934:2011)
DIN EN IEC 61810-7-51:2022-10 All-or-nothing electrical relays - Tests and Measurements - Part 7-51: Reset behavior at coil voltage drop (IEC 94/564/CD:2021); Text in German and English / Note: Date of issue 2022-09-30
DIN EN 61000-4-34:2008 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34:2005); German version E
DIN VDE 0100 Bb.5:1995 Erection of power installations with nominal voltages up to 1000 V - Permissible lengths of cables and cords taking into consideration protection against electric shock in case of fault, short circuit or voltage drop
DIN IEC/TS 61934:2012 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses (IEC/TS 61934:2011)
DIN 40771-2:1981 Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; electrical characteristics; discharge duration
DIN EN 60270:2001 High-voltage test techniques - Partial discharge measurement (IEC 60270:2000); German version EN 60270:2001
DIN VDE 0100 Beiblatt 5:2021 Low-voltage electrical installation; Supplement 5: Permissibel lengths of cables and cords taking into consideration fault protection, protection against short circuit and voltage drop
DIN VDE 0100-520 Bb.2:2010 Low-voltage electrical installations - Selection and erection of electrical equipment - Part 520: Wiring systems - Supplement 2: Protection against overload, Selection of overcurrent protective devices, permissible lengths of cables and cords taking into
DIN EN 61047:2005 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements (IEC 61047:2004); German version EN 61047:2004
DIN 15995-1:1983 Lamp housing for still picture projection and motion-picture projection; safety requirements for lamp housings for high-pressure discharge lamps and for safety equipment
DIN EN IEC 61000-4-11:2021 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase (IEC 61000-4-11:2020 + COR1:2020); German v
DIN VDE 0380-5:1995 Insulating liquids - Determination of the partial discharge inception voltage (PDIV) - Test methods (IEC/TR3 61294:1993)(Report)
DIN EN 61621:1999 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997); German version EN 61621:1997

Group Standards of the People's Republic of China, Voltage drop during discharge

T/CPSS 1008-2020 Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment
T/CPSS 1003-2019 Technical specification for low-voltage DC compensator on voltage dips and short interruptions of AC input
T/CEC 440-2021 110 (66) kV ~ 500kV AC cable withstand voltage test simultaneous distributed partial discharge detection system
T/CEC 441-2021 110 (66) kV ~ 500kV AC cable withstand voltage test and simultaneous distributed partial discharge detection method
T/CPSS 1005-2018 Technical specification for voltage sag monitoring system
T/CPSS 1004-2022 Guidelines for risk assessment of voltage sag sensitive users accessing power grid
T/GDWCA 0032-2018 Rated voltage 450/750V and below Elevator and lifting equipment high flexible special cable
T/CPSS 1006-2021 Technical Specification for low voltage Parallel Transfer Switch Type Voltage Sag Control Device
T/CES 159-2022 Technical specification for distributed photovoltaic voltage sag monitoring system
T/CEC 205-2019 On-site Partial Discharge Test Method for 500kV High Voltage Shunt Reactor

Professional Standard - Electron, Voltage drop during discharge

SJ 813-1974 Methods of measurement for the tube voltage drop of glow discharge counting tubes
SJ 1395-1978 Methods of measurement for anode current and tube voltage drop of gas discharge noise tubes
SJ 454-1973 Methods of measurement for peak voltage drop of tube, reverse peak voltage drop of tube and rectifying current of high-voltage rectifier tubes
SJ 20476-1995 General specification for gas discharge tubes for overvoltage protection
SJ 871-1974 Glow discharge voltage regulator tubes,Type WY-2P
SJ 873-1974 Glow discharge voltage regulator tubes,Type WY-4P
SJ 872-1974 Glow discharge voltage regulator tubes,Type WY-3P
SJ 2354.8-1983 Method of measurement for pulse rise time and fall time of PIN and avalanche photodiodes
SJ 811-1974 Methods of measurement for the firing voltage of glow discharge counting tubes
SJ 1394-1978 Methods of measurement for firing voltage of gas discharge noise tubes
SJ 20476.3-1996 Detail specification for gas discharge tube for overvoltage protection of type R408A
SJ 20476.4-1997 Detail specification for gas discharge tube for overvoltage protection of type R23
SJ 1393-1978 Methods of measurement for cathode preheating time of gas discharge noise tubes
SJ 2354.4-1983 Method of measurement for forward voltage drop of PIN and avalanche photodiodes
SJ 812-1974 Methods of measurement for the firing voltage in dark ambient of glow discharge counting tubes
SJ 1396-1978 Methods of measurement for voltage standing wave ratio of gas discharge noise tubes

Professional Standard - Postal Service, Voltage drop during discharge

YZ/T 0066-2002 Electromagnetic compatibility of small - size post products - lmmunity test requirements of electrostatic discharge, electrical fast transient burst, voltage dips and short interruptions

RU-GOST R, Voltage drop during discharge

GOST 21023-1975 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
GOST 30804.4.11-2013 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST 23089.6-1983 Integrated circuits. Method of measuring the operational amplifiers output voltage settling time
GOST 22988.2-1978 Gas caunters. Method of corona descharge voltage measurement
GOST 27648-1988 Veriable resistors. Low voltage method of testing of moveable contact intermediate resistance
GOST 23089.10-1983 Integrated circuits. Method of measuring the operational amplifiers output voltage maximum build-up rate and time
GOST R 55191-2012 High voltage test techniques. Partial discharge measurements
GOST 12268-1979 Electrical insulating board. Methods for determination of test voltage resistance, surface discharge resistance and compressibility under pressure
GOST 22091.12-1984 X-ray devices. The methods of measuring of currents and electrode voltage per pulse
GOST R 51317.4.11-2007 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 51317.4.11-1999 Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods
GOST 26033-1991 Metering amplifiers of direct current and its voltage. General technical requirements and methods of tests
GOST 21107.1-1975 Gas discharge devices. Methods of measurement of electrical parameters of stabilizing tube
GOST 26033-1983 Metering amplifiers of direct current and its voltage. General specifications
GOST 23089.3-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators zero offset voltage and emf
GOST 22988.1-1978 Gas caunters. Method of threshold voltage measurement

国家市场监督管理总局、中国国家标准化管理委员会, Voltage drop during discharge

GB/T 39269-2020 Voltage dip and short interruption—Immunity testing method for low voltage equipment
GB/T 39227-2020 Immunity time testing method under voltage dip for sensitive process rated less than 1000 V
GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements
GB/T 39270-2020 Voltage dip indices and severity assessment method

Defense Logistics Agency, Voltage drop during discharge

DLA MIL-PRF-27/180 B-2008 TRANSFORMER, POWER, STEP-DOWN
DLA MIL-PRF-27/27 A-2008 TRANSFORMER, POWER, STEP DOWN
DLA MIL-PRF-27/192 A-2008 TRANSFORMER, POWER, STEPDOWN
DLA MIL-T-27/99 C-2012 TRANSFORMER, POWER, STEP-DOWN
DLA MIL-T-27/295 C-2012 TRANSFORMER, POWER, STEP-DOWN
DLA MIL-PRF-27/134 B-2009 TRANSFORMER, POWER, STEP-DOWN
DLA MIL-T-27/227 A-2009 TRANSFORMER, POWER, STEP-DOWN
DLA MIL-PRF-27/155 B VALID NOTICE 1-2001 TRANSFORMER, POWER, STEPDOWN, TF4S03EA
DLA MIL-T-27/156 A VALID NOTICE 4-2004 TRANSFORMER, POWER, STEP-DOWN, TF4S03AJ
DLA MIL-PRF-27/195 A-2008 TRANSFORMER, POWER, STEPDOWN
DLA MIL-T-27/184 B VALID NOTICE 3-2011 Transformer, Power, Step-Down, TF4S03AH
DLA MIL-T-27/140B (1)-1997 TRANSFORMERS, POWER, STEP-DOWN, TF4S03YY
DLA MIL-T-27/141 A VALID NOTICE 4-2011 Transformers, Power, Step-Down, TF5S03ZZ
DLA MIL-T-27/148 A VALID NOTICE 4-2011 Transformer, Power, Step-Down, TF4S03HA
DLA MIL-T-27/154 VALID NOTICE 4-2011 Transformer, Power, Step-Down, TF4S03EB
DLA MIL-T-27/156 A VALID NOTICE 5-2011 Transformer, Power, Step-Down, TF4S03AJ
DLA MIL-PRF-27/194 B-2008 TRANSFORMER, POWER, STEPDOWN AND STEP-UP
DLA MIL-T-27/36 C-2012 TRANSFORMER, POWER, STEP DOWN AND STEP UP
DLA MIL-T-27/181 C-2009 TRANSFORMER, POWER, STEP-DOWN AND STEP-UP
DLA MIL-T-27/265 B-2009 TRANSFORMER, POWER, STEP DOWN AND STEP UP
DLA MS16450 REV F VALID NOTICE 1-2003 TRANSFORMER, POWER, STEP-DOWN, TYPE TF4RX02HA203
DLA MS16450 REV F-1986 TRANSFORMER, POWER, STEP-DOWN, TYPE TF4RX02HA203
DLA MIL-PRF-27/25 C-2008 TRANSFORMERS, POWER, STEP DOWN, 3-PHASE
DLA MIL-T-27/183 B VALID NOTICE 4-2011 Transformer, Power, Step-Down and Step-Up, TF45S03JA
DLA MIL-PRF-27/187 D-2008 TRANSFORMER, POWER, STEP-DOWN, AUTOTRANSFORMER
DLA MIL-T-27/202 B-2012 TRANSFORMERS, POWER, STEP-DOWN
DLA MS16403 REV D VALID NOTICE 2-2003 TRANSFORMER, POWER, STEP-DOWN AND STEP-UP, TYPE TF4RX03JB221
DLA MS16403 REV D VALID NOTICE 1-1988 TRANSFORMER, POWER, STEP-DOWN AND STEP-UP, TYPE TF4RX03JB221
DLA MS16403 REV D-1982 TRANSFORMER, POWER, STEP-DOWN AND STEP-UP, TYPE TF4RX03JB221
DLA MIL-PRF-27/193 B-2008 TRANSFORMER, POWER, STEPDOWN
DLA MS16403 REV D VALID NOTICE 3-2011 Transformer, Power, Step-Down and Step-Up, Type TF4RX03JB221
DLA MIL-T-27/158 C-2013 TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE) TRANSFORMER, POWER, STEP-DOWN
DLA DSCC-VID-V62/06673 REV A-2012 MICROCIRCUIT, LINEAR, LOW DROP OUT VOLTAGE REGULATORS, MONOLITHIC SILICON
DLA SMD-5962-12202 REV A-2013 MICROCIRCUIT, LINEAR, SYNCHRONOUS BUCK REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-93119 REV A-2009 MICROCIRCUIT, LINEAR, STEP-DOWN SWITCHING REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-96503 REV A-2009 MICROCIRCUIT, LINEAR, 5.0 V, 1A STEP-DOWN VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-99619 REV B-2009 MICROCIRCUIT, LINEAR, BUCK CURRENT / VOLTAGE FED PUSH-PULL PULSE WIDTH MODULATOR CONTROLLER, MONOLITHIC SILICON
DLA SMD-5962-00541 REV A-2007 MICROCIRCUIT, LINEAR, OPERATIONAL AMPLIFIER, CMOS, MONOLITHIC SILICON
DLA SMD-5962-96879-1997 MICROCIRCUIT, LINEAR, 3.3 V, 1A STEP-DOWN VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-96504-1996 MICROCIRCUIT, LINEAR, 1 A STEP DOWN, VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA MIL-T-9219 VALID NOTICE 2-1993 TRANSFORMERS, POWER, AUTOTRANSFORMER, AND STEP DOWN, 400 CYCLE, GENERAL SPECIFICATION FOR
DLA MIL-T-9219 (2)-1965 TRANSFORMERS, POWER, AUTOTRANSFORMER, AND STEP DOWN, 400 CYCLE, GENERAL SPECIFICATION FOR
DLA MIL-T-9219-1953 TRANSFORMERS, POWER, AUTOTRANSFORMER, AND STEP DOWN, 400 CYCLE, GENERAL SPECIFICATION FOR
DLA MIL-T-9219 NOTICE 3-1999 TRANSFORMERS, POWER, AUTOTRANSFORMER, AND STEP DOWN, 400 CYCLE, GENERAL SPECIFICATION FOR
DLA MIL-T-9219 VALID NOTICE 4-2011 Transformers, Power, Autotransformers and Step Down, 400 Cycle, General Specification For
DLA SMD-5962-09225 REV B-2010 MICROCIRCUIT, RADIATION HARDENED, LINEAR, SYNCHRONOUS BUCK REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-09225 REV C-2011 MICROCIRCUIT, RADIATION HARDENED, LINEAR, SYNCHRONOUS BUCK REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-09225 REV E-2013 MICROCIRCUIT, RADIATION HARDENED, LINEAR, SYNCHRONOUS BUCK REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-95597 REV D-2003 MICROCIRCUIT, LINEAR, VOLTAGE FEEDBACK CLAMP AMPLIFIER, MONOLITHIC SILICON
DLA SMD-5962-10221-2013 MICROCIRCUIT, LINEAR, SYNCHRONOUS STEP DOWN CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-10221 REV A-2013 MICROCIRCUIT, LINEAR, SYNCHRONOUS STEP DOWN CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-96502 REV B-2009 MICROCIRCUIT, LINEAR, +12 V, 1 A STEP DOWN, SWITCHING VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-02534 REV D-2006 MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 2.5 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-02535 REV D-2006 MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 3.3 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-02536 REV D-2006 MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 5 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-96503-1997 MICROCIRCUIT, LINEAR, 5.0 V, 1A STEP-DOWN VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA DSCC-VID-V62/12601-2012 MICROCIRCUIT, DIGITAL-LINEAR, ENHANCED, LOW INPUT VOLTAGE MODE SYNCHRONOUS BUCK CONTROLLER, MONOLITHIC SILICON
DLA DSCC-DWG-V62/14601-2013 MICROCIRCUIT, DIGITAL-LINEAR, DIGITAL DUAL SYNCHRONOUS BUCK POWER DRIVER, MONOLITHIC SILICON
DLA SMD-5962-93243 REV D-2009 MICROCIRCUIT, HYBRID, LINEAR, HIGH SPEED, HIGH VOLTAGE, VIDEO AMPLIFIER
DLA SMD-5962-89972 REV D-2009 MICROCIRCUIT, HYBRID, LINEAR, HIGH SPEED, HIGH VOLTAGE, VIDEO AMPLIFIER
DLA SMD-5962-93246 REV E-2013 MICROCIRCUIT, HYBRID, LINEAR, HIGH SPEED, HIGH VOLTAGE, VIDEO AMPLIFIER
DLA SMD-5962-95597 REV E-2010 MICROCIRCUIT, LINEAR, VOLTAGE FEEDBACK CLAMP AMPLIFIER, MONOLITHIC SILICON
DLA MIL-PRF-83726/31 F-2009 RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE IIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS
DLA MIL-PRF-83726/31 G-2011 RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE IIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS
DLA MIL-PRF-83726/31 H-2012 RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE IIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS
DLA MIL-PRF-83726/31 J-2013 RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE IIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS
DLA SMD-5962-93119-1994 MICROCIRCUIT, LINEAR, STEP-DOWN SWITCHING REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-97511 REV C-2002 MICROCIRCUIT, LINEAR, WIDE INPUT VOLTAGE, DUAL OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA SMD-5962-97535 REV B-2003 MICROCIRCUIT, LINEAR, LOW POWER, PRECISION, BIFET DUAL OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA MIL-PRF-83726/36 D-2013 RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE IIA, HERMETICALLY SEALED, 4PDT, 10 AMPERES, FIXED TIME DELAY, 0.1 TO 600 SECONDS
DLA SMD-5962-02503 REV A-2005 MICROCIRCUIT, LINEAR, RADIATION HARDENED, NEGATIVE LOW DROPOUT ADJUSTABLE VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-87604 REV F-2010 MICROCIRCUIT, LINEAR, OP AMP AND VOLTAGE REFERENCE, MONOLITHIC SILICON
DLA MIL-M-38510/106 B VALID NOTICE 1-2009 Microcircuits, Linear, Voltage Follower Operational Amplifiers, Monolithic Silicon
DLA SMD-5962-87606 REV C-2010 MICROCIRCUIT, LINEAR, VOLTAGE FOLLOWER OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
DLA DSCC-VID-V62/12614 REV C-2012 MICROCIRCUIT, LINEAR, DIFFERENCE AMPLIFIER, HIGH COMMON MODE VOLTAGE, MONOLITHIC SILICON
DLA DSCC-VID-V62/12614 REV A-2012 MICROCIRCUIT, LINEAR, DIFFERENCE AMPLIFIER, HIGH COMMON MODE VOLTAGE, MONOLITHIC SILICON
DLA SMD-5962-95536 REV G-2003 MICROCIRCUIT, LINEAR, HIGH SPEED, HIGH OUTPUT CURRENT, VOLTAGE FEEDBACK AMPLIFIER, MONOLITHIC SILICON

Professional Standard - Machinery, Voltage drop during discharge

JB/T 9478.10-1999 Measuring methods of photocell - Rise time and fall time
JB/T 9478.10-2013 Photovoltaic Cell Measurement Methods Part 10: Rise Time, Fall Time
JB/T 8970-2014 Discharge coils for high voltage shunt capacitors
JB/T 8970-1999 Discharge coils for high voltage shunt capacitors
JB/T 10821-2008 System power saver for low voltage AC
JB/T 9299-1999 Stabilized voltage supply,a.c.output,magnetic amplifier type
JB/T 6239.3-1992 General test method for industrial automation instrumentation on the effect of power supply voltage drop

British Standards Institution (BSI), Voltage drop during discharge

BS EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
BS EN 61000-4-11:2004+A1:2017 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
23/30474610 DC BS EN IEC 61810-7-50. Electrical relays. Tests and Measurements - Part 7-50. Momentary drop in supply voltage
PD IEC/TR 61000-2-8:2002 Electromagnetic compatibility (EMC). Environment. Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
BS EN 60255-11:2010 Measuring relays and protection equipment - Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
22/30457837 DC IEC 61810-7-50 ED.1.0. All-or-nothing electrical relays. Tests and Measurements - Part 7-50. Momentary drop in supply voltage
21/30445979 DC BS EN IEC 61810-7-50. All-or-nothing electrical relays. Tests and Measurements - Part 7-50. Momentary drop in supply voltage
23/30474609 DC BS EN IEC 61810-7-51. Electrical relays. Tests and Measurements - Part 7-51. Reset behavior at coil voltage drop
DD IEC/TS 61934:2011 Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
18/30381090 DC BS EN 61000-4-11. Electromagnetic compatibility (EMC). Part 4-11. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS EN 61000-4-34:2007+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
BS EN 61000-4-34:2007 Electromagnetic compatability (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
BS DD IEC/TS 61934:2011 Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
PD ISO/TR 11071-2:2006 Comparison of worldwide lift safety standards. Hydraulic lifts (elevators)
BS 4363:1998 Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
BS 4363:1998+A1:2013 Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
22/30457836 DC BS EN IEC 61810-7-51. All-or-nothing electrical relays. Tests and Measurements - Part 7-51. Reset behavior at coil voltage drop
21/30444901 DC BS EN IEC 61810-7-51. All-or-nothing electrical relays. Tests and Measurements - Part 7-51. Reset behavior at coil voltage drop
BS 5655-10:1986 Lifts and service lifts - Specification for the testing and inspection of electric and hydraulic lifts
BS EN 50526-1:2012 Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices. Surge arresters
BS EN 61047:2004 D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements
BS 5655-2:1988 Lifts and service lifts. Safety rules for the construction and installation of hydraulic lifts
BS EN 61643-311:2001 Low voltage surge protective devices - Specification for gas discharge tubes (GDT)
BS EN 61643-311:2002 Low voltage surge protective devices - Specification for gas discharge tubes (GDT)
BS EN 50526-2:2014 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices. Voltage limiting devices
BS EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BS EN 2349-301:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick up and drop out voltage
BS EN 2349-301:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage
19/30352648 DC PD IEC/TS 60076-24. Power transformers. Part 24. Specification of Voltage Regulating Distribution Transformers (VRDT)
BS 8573:2012 Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations having low emissions of smoke and corrosive gases when affected by fire
BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 3841-301:2005 Aerospace series - Circuit breakers - Test methods - Voltage drop
BS EN 3841-301:2004 Circuit breakers-Test methods-Part 301:Voltage drop
BS PD IEC TS 60034-27-5:2021 Rotating electrical machines. Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage
PD IEC TS 60034-27-5:2021 Rotating electrical machines. Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage
23/30471811 DC BS EN IEC 61810-7-6. Electrical relays. Tests and Measurements - Part 7-6. Contact-circuit resistance (or voltage drop)
BS EN ISO 6416:2017 Tracked Changes. Hydrometry. Measurement of discharge by the ultrasonic transit time (time of flight) method
BS EN 60270:2001 High-voltage test techniques - Partial discharge measurements
BS EN 60270:2001+A1:2016 High-voltage test techniques. Partial discharge measurements
PD IEC TR 63434:2023 Low voltage switchgear and controlgear. Partial discharge voltages and PD-level in low voltage switchgear and controlgear
PD IEC/TR 61243-6:2017 Live working. Voltage detectors. Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages above 1 kV AC
BS 5655-12:2005 Lifts and service lifts - Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 6724:1997+A3:2008 Electric cables — Thermosetting insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V, having low emission of smoke and corrosive gases when affected by fire
BS EN 50117-2-4:2004+A2:2013 Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 3000 MHz
BS EN 50117-2-1:2005+A2:2013 Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz

U.S. Military Regulations and Norms, Voltage drop during discharge

ARMY MIL-T-60207 VALID NOTICE 2-2013 TRANSFORMER, POWER, STEP DOWN, 10525910

Professional Standard - Automobile, Voltage drop during discharge

QC/T 467-1999 Voltage drop in the starter circuit
QC/T 830-2010 Electronic ballast for high-intensity-discharge lamp of motor vehicle

Aeronautical Radio Inc., Voltage drop during discharge

ARINC 413A SEC 3.0 Voltage Transients

工业和信息化部, Voltage drop during discharge

JB/T 13801-2020 Electric lifting system for projection equipment

Canadian Standards Association (CSA), Voltage drop during discharge

CSA IEC 61000-2-8:04-CAN/CSA:2004 Electromagnetic compatibility (EMC) Part 2-8: Environment Voltage dips and short interruptions on public electric power supply systems with statistical measurement results First Edition
CAN/CSA-CEI/IEC 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (Second Edition)
CSA IEC 61000-4-11-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests First Edition
CSA CEI 61000-4-11-05-CAN/CSA-2005 Compatibilite Electromagnetique (CEM) - Partie 4-11: Techniques d'essai et de mesure . Essais d'immunit?aux creux de tension, coupures br鑦es et variations de tension Deuxieme Edition; CEI 61000-4-11:2004
CSA CEI 61000-2-8:04-CAN/CSA-2004 Compatibilit?閘ectromagn閠ique (CEM) Partie 2-8: Environnement Creux de tension et coupures br鑦es sur les r閟eaux d撮lectricit?publics incluant des r閟ultats de mesures statistiques Premiere Edition
CSA CEI 61000-4-34-06-CAN/CSA-2006 Compatibilit?閘ectromagn閠ique (CEM) ?Partie 4-34: Techniques d'essai et de mesure ?Essais d'immunit?aux creux de tension coupures br鑦es et variations de tension pour mat閞iel ayant un courant appel?de plus de 16 A par phase
CAN/CSA-CEI/IEC 61000-4-34:2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-34 AMD 1:2010 Amendment 1 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First Edition)

American National Standards Institute （ANSI), Voltage drop during discharge

ANSI/SCTE 129-2007 Drop Passives: Bonding Blocks (Without Surge Protection)
ANSI/SCTE 68-2013 Drop Passives: Matching Transformers 75 Ohm to 300 Ohm
ANSI C78.41-2006 High-Intensity Discharge Lamps - Low Pressure Sodium Lamps
ANSI/IEEE 436:1991 Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
ANSI/IEEE C57.127:2007 Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors
ANSI/SCTE 153-2008 Drop Passives: Splitters, Couplers and Power Inserters
ANSI/IEEE C37.011:2011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers

Society of Automotive Engineers (SAE), Voltage drop during discharge

SAE J541-1996 Voltage Drop for Starting Motor Circuits

SAE - SAE International, Voltage drop during discharge

SAE J541-2013 Voltage Drop for Starting Motor Circuits
SAE J541-1989 Voltage Drop for Starting Motor Circuits@ Recommended Practice
SAE J541-1983 Voltage Drop for Starting Motor Circuits

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Voltage drop during discharge

IEEE 1564-2014 Guide for Voltage Sag Indices
IEEE 1668-2017 Recommended Practice for Voltage Sag and Short Interruption Ride- Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE 436-1977 GUIDE FOR MAKING CORONA (PARTIAL DISCHARGE) MEASUREMENTS ON ELECTRONICS TRANSFORMERS
IEEE 1668-2014 Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE 1668 ERTA-2018 Errata to Recommended Practice for Voltage Sag and Short Interruption Ride- Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE C57.109-1985 GUIDE FOR TRANSFORMER THROUGH-FAULT-CURRENT DURATION
IEEE C57.113-1988 Guide for partial discharge measurement in liquid-filled power transformers and shunt reactors

CENELEC - European Committee for Electrotechnical Standardization, Voltage drop during discharge

EN 61000-4-11:1994 Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 11: Voltage Dips@ Short Interruptions and Voltage Variations Immunity Tests

Japanese Industrial Standards Committee (JISC), Voltage drop during discharge

JIS C 61000-4-11:2008 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measuring techniques -- Voltage dips, short interruptions and voltage variations immunity tests
JIS C 1000-4-11:2003 Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques -- Section 11: Voltage dips, short interruptions and voltage variations immunity tests
JIS C 9311:1989 Voltage reducing devices for AC arc welding machines
JIS C 61000-4-11:2003 Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques -- Section 11: Voltage dips, short interruptions and voltage variations immunity tests
JIS C 9311:2005 Voltage reducing devices for AC arc welding machines
JIS C 61000-4-34:2008 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
JIS C 61000-4-34:2017 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
JIS C 9311:2011 Voltage reducing devices for AC arc welding power sources
JIS C 61000-4-11:2021 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measuring techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
JIS C 7605:1995 Low pressure mercury germicidal discharge lamps
JIS C 4902-3:2010 High voltage power capacitors and attached apparatus -- Part 3: Discharge coils
JIS B 8658:1989 Rules of electronic amplifier for electro-hydraulic control valves

ZA-SANS, Voltage drop during discharge

SANS 61000-4-11:2005 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
SANS 50081-3:2000 Safety rules for the construction and installation of lifts Part 3: Electric and hydraulic service lifts
SANS 60270:2000 High-voltage test techniques - Partial discharge measurements
SANS 1545-7:2007 Safety rules for the construction and installation of lifts Part 7: Electric and hydraulic service lifts (dumb waiters)
SANS 60099-6:2005 Surge arresters Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less

International Electrotechnical Commission (IEC), Voltage drop during discharge

IEC 61000-4-11:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 112/152/CD:2010 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests
IEC TS 61934:2006 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC TS 61934:2011 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC 61000-4-11/AMD1:2000 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
IEC 61000-4-11:2004/ISH1:2010 Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004/AMD1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
IEC 61000-2-8:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
IEC 60255-11:2008 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
IEC 61000-4-34:2005+AMD1:2009 CSV Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-34:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
IEC TR 61000-2-8:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
IEC 61000-4-34:2005/AMD1:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmentwith mains curr
IEC 61000-4-34:2005 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
IEC 61000-4-11:2020 RLV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 60270:2000 High-voltage test techniques - Partial discharge measurements
IEC 60270:2015 High-voltage test techniques - Partial discharge measurements
IEC 61000-4-11:2020/COR1:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 61243-1:2003+AMD1:2009 CSV Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
IEC TR 60279:1969 Measurement of the winding resistance of an a.c. machine during operation at alternating voltage
IEC 61000-4-34:2005/AMD1:2009/COR1:2009 Corrigendum 1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
IEC 61243-1:2021 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC
IEC 61047:1991 D.C. or a.c. supplied electronic step-down convertors for filament lamps; performance requirements
IEC 61047:2004 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
IEC 61000-4-11:2020/COR2:2022 Corrigendum 2 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 60895:2002/COR1:2003 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ˝600 kV d.c.
IEC 61000-4-34/AMD1/COR1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase; Amendment 1; Corrigendum 1
IEC 61000-4-11:2001 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests
IEC 60099-6:2019 Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less
IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
IEC 60270:2000/COR1:2001 High-voltage test techniques - Partial discharge measurements
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
IEC 60270:2000/AMD1:2015 High-voltage test techniques - Partial discharge measurements; Amendment 1
IEC 61047/AMD2:2001 D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements; Amendment 2
IEC 61047/AMD1:1996 D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements; Amendment 1
IEC 61621:1997 Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges
IEC 62848-2:2019 Railway applications - DC surge arresters and voltage limiting devices - Part 2: Voltage limiting devices

Association Francaise de Normalisation, Voltage drop during discharge

NF C91-004-11*NF EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11 : testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
NF EN 61000-4-29:2001 Compatibilité électromagnétique (CEM) - Partie 4-29 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension sur les accès d'alimentation en courant continu
NF C45-200-11:2010 Measuring relays and protection equipment - Part 11 : voltage dips, short interruptions, variations and ripple on auxiliary power supply port.
NF C91-004-34*NF EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34 : testing and measuring techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
NF EN 61000-4-34/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-34 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant d'alimentation de plus de 16 A par phase
NF C91-004-11*NF EN IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11 : testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
NF EN 61000-4-34:2007 Compatibilité électromagnétique (CEM) - Partie 4-34 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant appelé de plus de 16 A par phase
NF EN IEC 61000-4-11:2020 Compatibilité électromagnétique (CEM) - Partie 4-11 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour les appareils à courant d'entrée inférieur ou égal à 16 A par phase
NF F41-526-1*NF EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1 : surge arresters
NF C71-241*NF EN 61047:2005 D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements
UTE C79-610U*UTE C79-610:1979 Industrial electrical heating. Electrical moulded resistances for industrial furnaces. Provisional requirements.
NF EN 61621:1998 Matériaux isolants solides secs - Essai de résistance aux décharges à l'arc haute tension, faible courant.
NF EN 50526-1:2012 Applications ferroviaires - Installations fixes - Parafoudres et limiteurs de tension pour systèmes à courant continu - Partie 1 : parafoudres
NF C18-407*NF EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations.
NF C71-241:1993 D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance, requirements.
NF EN 61047:2005 Convertisseurs abaisseurs électroniques alimentés en courant continu ou alternatif pour lampes à incandescence - Exigences de performance
NF C41-301*NF EN 60270:2001 High-voltage test techniques - Partial discharge measurements
NF C52-123:1968 Transformers. Liquid dielectric drain valves.
NF C41-301/A1*NF EN 60270/A1:2016 High-voltage test techniques - Partial discharge measurements
NF EN 60270/A1:2016 Techniques des essais à haute tension - Mesures des décharges partielles
NF C73-256:1980 Appareils électrodomestiques chauffants - Appareils de chauffage des locaux de type à accumulation à décharge réglable conçus exclusivement pour un temps nominal de charge de 8 h - Règles d'aptitude à la fonction (changement de statut de NF C ...
NF F41-526-2*NF EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2 : voltage limiting devices
NF L58-100-304*NF EN 2349-304:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304 : operate and release time

Danish Standards Foundation, Voltage drop during discharge

DS/EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
DS/EN 61000-4-29:2001 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
DS/EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
DS/IEC/TR 61000-2-8:2003 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
DS/EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
DS/EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
DS/IEC 895:1990 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
DS/EN 60270:2002 High-voltage test techniques - Partial discharge measurements
DS/EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc dischargers
DS/EN 61047:2005 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements

Indonesia Standards, Voltage drop during discharge

SNI IEC 61000-4-11:2013 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
SNI IEC 60270:2010 High-voltage test techniques - Partial discharge measurements

AENOR, Voltage drop during discharge

UNE-EN 61000-4-11:2005/A1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
UNE-EN 61000-4-11:2005 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
UNE-EN 61000-4-29:2002 Electromagnetic compatibility (EMC) -- Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests.
UNE-EN 61000-4-34:2008/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
UNE-EN 61000-4-34:2008 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005).
UNE-EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
UNE-IEC/TR 61000-2-8:2006 IN Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results (IEC/TR 61000-2-8:2002)
UNE-EN 60270:2002 High-voltage test techniques - Partial discharge measurements.
UNE 20151:1970 PLANT OF DISCHARGE LAMPS OR TUBES SUBMITTED TO VOLTAGES OVER 440 V.
UNE-EN 61621:1998 DRY, SOLID INSULATING MATERIALS. RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES.
UNE-EN 61047:2005 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements

CZ-CSN, Voltage drop during discharge

CSN 27 4075-1982 Electric lifts. Speciál reqwirements for hydraulic lifts
CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film
CSN 35 1085-1987 Power transformers. Methods for partial discharge intensity measurements under alternating voltage
CSN 33 0331-1978 Electrical apparatuses for the voltage up to 1000 V. Degree of protection
CSN EN 81-2-1993 Safety rules for the construction and installation of lifts and service lifts. Part 2. Hydraulic lifts

Institute of Electrical and Electronics Engineers (IEEE), Voltage drop during discharge

IEEE P1564/D19, July 2013 IEEE Guide for Voltage Sag Indices
IEEE Std 1564-2014 IEEE Guide for Voltage Sag Indices
IEEE P1668/D2, September 2016 IEEE Approved Draft Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE 436-1991 Guide for making corona (partial discharge) measurements of electronics transformers
IEEE Std 1668-2017 IEEE Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE Std 436-1991 IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
IEEE Std 436-1977 IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
IEEE Std 1668-2014 IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE P1668/D3, March 2017 IEEE Approved Draft Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V

TH-TISI, Voltage drop during discharge

TIS 1460-2009 Electromagnetic compatibility (emc).part 4: testing and measurement techniques.section 11: voltage dips, short interruptions and voltage variations immunity tests

YU-JUS, Voltage drop during discharge

JUS M.E2.066-1997 Boiler plants - Temporaiy operation oj a boiler plant with a steam generator of the group IV with reduce? working pressure without supervision
JUS M.C1.530-1997 Electrohy?raulic release device - Releasing force, stroke and designation
JUS N.H9.100-1984 Instrument transformers. Measurements ofpartial discharges

Standard Association of Australia （SAA）, Voltage drop during discharge

AS/NZS IEC/TR 61000.2.8:2009
AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD)
AS/NZS 61000.4.34:2012 Electromagnetic compatibility (EMC), Part 4.34: Testing and measurements techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
AS/NZS 61000.4.34:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD)
AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance
AS 60270:2001(R2015)
AS 60270:2001 High-voltage test techniques - Partial discharge measurements

Taiwan Provincial Standard of the People's Republic of China, Voltage drop during discharge

CNS 9095-1998 Discharge Coil for High Voltage Power Capacitor
CNS 5259-1980 Cinematography-Projector Usage of 8mm Type S Motion-Picture Film for Direct Front Proiection
CNS 7632-1981 Method of Measuring Voltage Drop on Closed Contacts Where Over 100 Amperes Flow Through the Contacts
CNS 2657-1966 Low-Voltage Mercury Discharge Tube (for Germ Killing)

European Committee for Electrotechnical Standardization（CENELEC）, Voltage drop during discharge

EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
EN 60255-11:2010 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
EN 61000-4-29:2000 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests
EN 61000-4-34:2007/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
EN 60270:2001 High-Voltage Test Techniques - Partial Discharge Measurements
HD 547 S1-1990 Conductive Clothing for Live Working at a Nominal Voltage up to 800 KV a.c.
EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables

Lithuanian Standards Office , Voltage drop during discharge

LST EN 61000-4-11-2004 Electromagnetic compatibility (EMC). Part 4-11: Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004)
LST EN 60255-11-2010 Measuring relays and protection equipment -- Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port (IEC 60255-11:2008)
LST EN 61000-4-29-2003 Electromagnetic Compatibility (EMC). Part 4-29: Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000)
LST EN 61000-4-34-2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005)
LST EN 61000-4-34-2007/A1-2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005/A1:2009)
LST EN 50526-1-2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices -- Part 1: Surge arresters
LST EN 61621-2001 Dry solid insulating materials. Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Voltage drop during discharge

GB/T 23642-2017 Electrical insulating materials and systems—Electrical measurement of partial discharges(PD) under short rise time and repetitive voltage impulses

Professional Standard - Electricity, Voltage drop during discharge

DL/T 566-1995 Technical requirements for loss-of-voltage timers
DL/T 1152-2012 General technical specification of secondary loop voltage drop testers of voltage transformer
DL/T 2112-2020 Technical guidelines for sensitive load voltage sag control
DL/T 2305-2021 Guidelines for Altitude Correction of Air Gap Discharge Voltage in HVDC Engineering
DL/T 2050-2019 On-site detection method of transient earth voltage partial discharge in high voltage switchgear
DL/T 653-2009 Specification of discharge coils for high voltage shunt capacitor for order
DL/T 653-1998 Specification of discharge coils for high voltage shunt capacitor for order
DL/T 2271-2021 Technical specifications for on-line partial discharge monitoring system for high voltage cables

ESD - ESD ASSOCIATION, Voltage drop during discharge

TR3.0-01-2002 Alternate Techniques for Measuring Ionizer Offset Voltage and Discharge Time (Formerly TR13-02)

HU-MSZT, Voltage drop during discharge

PL-PKN, Voltage drop during discharge

PN E85004-1964 High yoltage luminous discharge ?ube
PN-EN IEC 61000-4-11-2020-11 E Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase (IEC 61000-4-11:2020)
PN E04070-15-1986 Power transformers Test methods Measurement of intensity of partial discharge with alternating voltage
PN-EN IEC 61000-4-11-2020-11/AC-2020-12 E Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase (IEC 61000-4-11:2020/COR1:2020)
PN T01504-60-1987 Diodes Measuring methods Instant and peak forward recovery voltages Ufr, Ufrm and forward recovery time tfr

IEC - International Electrotechnical Commission, Voltage drop during discharge

TS 61934-2006 Electrical insulating materials and systems – Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses (Edition 1.0)

European Committee for Standardization (CEN), Voltage drop during discharge

prEN 50093-1991 Basic immunity standard for voltage dips, short interruptions and voltage variations
HD 388 S2-1983 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon transformers)

ES-AENOR, Voltage drop during discharge

Professional Standard - Military and Civilian Products, Voltage drop during discharge

WJ/Z 201-1984 Piezoelectric fuze action time (piezoelectric mechanism-electric detonator) simulation test method

ES-UNE, Voltage drop during discharge

UNE-EN IEC 61000-4-11:2021/AC:2022-10 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
UNE-EN IEC 61000-4-11:2021 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
UNE-EN 60270:2002/A1:2016 High-voltage test techniques - Partial discharge measurements

Professional Standard - Aerospace, Voltage drop during discharge

QJ 1323.26-1987 Electromagnetic relay test method action, release and bounce time test
QJ 1323.25-1987 Electromagnetic relay test method action and release voltage test

American Society of Mechanical Engineers (ASME), Voltage drop during discharge

ASME A17.3-1996 Safety code for existing elevators and escalators (includes requirements for electric and hydraulic elevators and escalators)
ASME A17.3-1993 Safety code for existing elevators and escalators includes requirements for electric and hydraulic elevators and escalators
ASME A17.3-1990 Safety Code for Existing Elevators and Escalators
ASME A17.3a Addenda-1994 Safety code for existing elevators and escalators (includes requirements for electric and hydraulic elevators and escalators); Addenda
ASME A17.2-2001 Guide for inspection of elevators, esclators, and moving walks (includes inspection procedures for electric traction and winding drum elevators, hydraulic elevators, and escalators and moving walks)
ASME A17.2-2012 Guide for Inspection of Elevators, Escalators, and Moving Walks (Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic Elevators, Inclined Elevators, and Escalators and Moving Walks)

AT-ON, Voltage drop during discharge

ONORM EN 81-2-1992 Safety rules for the construction and installation of lifts and service lifts -Hydraulic lifts

Hubei Provincial Standard of the People's Republic of China, Voltage drop during discharge

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

TR-TSE, Voltage drop during discharge

TS 3091-1978 LOW — VOLTAGE MOTOR STARTERS Roduced Voltage a.c. Starters: Star - Delta Starters

IN-BIS, Voltage drop during discharge

PT-IPQ, Voltage drop during discharge

NP 3340-1987

KR-KS, Voltage drop during discharge

KS C IEC 60099-6-2021 Surge arresters — Part 6: Surge arresters containing both series and parallel gapped structures — System voltage of 52 kV and less
KS B 6919-2018(2023) Safety rules for the construction and installation of elevators(lifts) ― Part 2: Hydraulic lifts
KS C IEC 60270-2020 High-voltage test techniques — Partial discharge measurements

International Organization for Standardization (ISO), Voltage drop during discharge

ISO 26:1993 Cinematography; projector usage of 16 mm motion-picture films for direct front projection; specifications

Professional Standard - Energy, Voltage drop during discharge

DL/T 2324-2021 Technical guidelines for live detection of high-frequency partial discharge of high-voltage cables
NB/T 20333-2015 Design criteria of safety depressurization and venting system for primary loop of pressurized water reactor nuclear power plant

American Society for Testing and Materials (ASTM), Voltage drop during discharge

ASTM E751-07 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM B497-00(2012) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts

SE-SIS, Voltage drop during discharge

SIS 91 14 21-1968 Wells and machine rooms for passenger lifts and for dual purpose lift in residential buildings. Hydraulic lifts. Dimensions
SIS SS 431 12 83-1987 Safety of ballasts for tubular discharge lamps - Particular requirements for tubular discharge lamps of non-preheated types supplied by high frequency voltage

Professional Standard - Education, Voltage drop during discharge

JY 186-1985 Technical conditions of low pressure discharge tube group

国家能源局, Voltage drop during discharge

NB/T 42166-2018 Technical Specifications for Voltage Time Type Feeder Protection and Control of Distribution Networks

United States Navy, Voltage drop during discharge

NAVY QPL-17587-34-2006 CIRCUIT BREAKERS, LOW VOLTAGE, ELECTRIC POWER, AIR, OPEN FRAME, REMOVABLE CONSTRUCTION

NL-NEN, Voltage drop during discharge

NEN 3243-1986 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (neon transformers)

BE-NBN, Voltage drop during discharge

NBN-EN 61047-1993 D.C. or a.c. supplied electronic step-down convertors for filament lamps. Performance requirements

Shandong Provincial Standard of the People's Republic of China, Voltage drop during discharge

DB37/T 1844-2011 Technical requirements for energy-saving equipment for high-voltage gas discharge lamps

Association of German Mechanical Engineers, Voltage drop during discharge

VDI/VDE/DGQ/DKD 2622 Blatt 20-2013 Calibration of measuring equipment for electrical quantities - Direct-voltage measuring amplifiers