ZH
RU
ES

X-ray energy analysis spectrometer

X-ray energy analysis spectrometer, Total:499 items.

In the international standard classification, X-ray energy analysis spectrometer involves: Petroleum products in general, Analytical chemistry, Metalliferous minerals, Optics and optical measurements, Nuclear energy engineering, Linear and angular measurements, Ferrous metals, Non-destructive testing, Vocabularies, Testing of metals, Iron and steel products, Radiation measurements, Radiation protection, Non-ferrous metals, Refractories, Ferroalloys, Construction materials, Power stations in general, Occupational safety. Industrial hygiene, Paint ingredients, Medical sciences and health care facilities in general, Inorganic chemicals, Wastes, Fuels, Optical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Crude petroleum, Surface treatment and coating, Products of the chemical industry, Fertilizers, Manufacturing processes in the rubber and plastics industries, Non-metalliferous minerals, Water quality, Burners. Boilers, Products of the textile industry, Lubricants, industrial oils and related products, Soil quality. Pedology, Cereals, pulses and derived products, Petroleum, petroleum products and natural gas handling equipment, Physics. Chemistry, Medical equipment, Corrosion of metals, Geology. Meteorology. Hydrology, Edible oils and fats. Oilseeds, Fibre optic communications, Pipeline components and pipelines, Ceramics, Environmental protection.

German Institute for Standardization, X-ray energy analysis spectrometer

DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN ISO 16129:2020 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN ISO 15472:2020 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN ISO 15632:2015 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis (ISO 15632:2012)
DIN 51418-2:2015-03 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003); German version EN ISO 8754:2003
DIN IEC 62495:2011 Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube (IEC 62495:2011)
DIN EN ISO 8754:2003-12 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003); German version EN ISO 8754:2003
DIN 51440-1:2003 Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
DIN 51577-4:2023-07 Testing of mineral oil hydrocarbons and similar products - Determination of chlorine and bromine content - Analysis by energy dispersive X-ray spectrometry with low cost instruments / Note: Date of issue 2023-06-09*Intended as replacement for DIN 51577...
DIN EN ISO 20847:2004-07 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
DIN 51577-4:1994-02 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
DIN EN 10315:2006 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique; German version EN 10315:2006
DIN 51577-4:2023-11 Testing of mineral oil hydrocarbons and similar products - Determination of chlorine and bromine content - Part 4: Analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN EN ISO 13196:2015-11 Soil quality - Sreening soils for selected elements by energy-dipersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013); German version EN ISO 13196:2015
DIN EN 10315:2006-10 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique; German version EN 10315:2006
DIN 51391-2:1994-03 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
DIN EN ISO 13032:2012-06 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012); German version EN ISO 13032:2012

工业和信息化部/国家能源局, X-ray energy analysis spectrometer

JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers
JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer
JB/T 12962.1-2016 Energy-dispersive X-ray fluorescence spectrometers Part 1: General techniques

Japanese Industrial Standards Committee (JISC), X-ray energy analysis spectrometer

JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
JIS K 0145:2002 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
JIS R 2216:1995 Method for X-ray fluorescence spectrometric analysis of refractory bricks and refractory mortars
JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS K 0152:2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS K 0470:2008 Determination of arsenic and lead in clay and sand using energy-dispersive X-ray fluorescence spectrometry
JIS T 0306:2002 Analysis of state for passive film formed on metallic biomaterials by X-ray photoelectron spectroscopy
JIS K 0189:2013 Microbeam analysis.Electron probe microanalysis.Determination of experimental parameters for wavelength dispersive X-ray spectroscopy

International Organization for Standardization (ISO), X-ray energy analysis spectrometer

ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
ISO 15470:2017 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
ISO 15632:2021 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
ISO 15632:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 15632:2002 Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO/CD TR 18392:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds
ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
ISO/CD 5861 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/DIS 5861:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/TS 18507:2015 Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
ISO 16243:2011 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
ISO/TR 18392:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds
ISO 16795:2004 Nuclear energy - Determination of Gd<(Index)2>O<(Index))3> content of gadolinium fuel pellets by X-ray fluorescence spectrometry
ISO/DIS 16795 Nuclear Energy — Determination of Gd2O3 content in pellets containing uranium oxide by X-ray fluorescence spectrometry
ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
ISO/TR 19319:2003 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample area viewed by the analyser
ISO 17054:2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
ISO 17109:2015 Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
ISO/CD 13196:2023 Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
ISO 9167-2:1994 Rapeseed - Determination of glucosinolates content - Part 2: Method using x-ray fluorescence spectrometry
ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 19668:2017 Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials

British Standards Institution (BSI), X-ray energy analysis spectrometer

BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 16129:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
BS ISO 10810:2019 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 14701:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
BS EN ISO 8754:2003 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
BS PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
BS ISO 16243:2011 Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
BS EN ISO 20884:2011 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
BS 1902-9.2:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence
19/30354872 DC BS ISO 16795. Nuclear energy. Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
BS ISO 17109:2022 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin…
21/30433862 DC BS ISO 17109 AMD1. Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and…
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 17109:2015 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
BS EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
BS ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
BS EN 10315:2006(2010) Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
BS EN ISO 13196:2015 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
BS EN ISO 13032:2012 Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
DD ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis
BS ISO 14706:2000 Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 14706:2014 Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 14706:2001 Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy

Korean Agency for Technology and Standards (KATS), X-ray energy analysis spectrometer

KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS D ISO 15470-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
KS D ISO 15632:2012 Microbeam analysis－Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D ISO 15472-2003(2018)
KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
KS E 3075-2017 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS E 3075-2022 Method for X-ray fluorescence spectrometric analysis of limestone and dolomite
KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS M ISO 8754:2003 Petroleum products-Determination of sulfur content-Energy dispersive X-ray fluorescence method
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D 2597-1996(2016) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 14706-2003(2018)
KS D ISO 17054:2018 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
KS M 1068-2005 Qualitative/quantitative screening by XRF spectrometry
KS M ISO 20847:2006 Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
KS D ISO 19319:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS M ISO 20847-2006(2021) Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
KS M ISO 20847-2006(2016) Petroleum products－Determination of sulfur content of automotive fuels－Energy－dispersive X－ray fluorescence spectrometry
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS D ISO 14706:2003 Surface chemical analysis－Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence(TXRF) spectroscopy
KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS M ISO 14597:2003 Petroleum products－Determination of vanadium and nickel content－Wavelength-dispersive X-ray fluorescence spectrometry

Association Francaise de Normalisation, X-ray energy analysis spectrometer

NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
NF X21-008:2012 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive ray spectrometers for use in electron probe microanalysis
NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
NF M07-053*NF EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif
NF A11-103:1977 Chemical analysis of ferroniobium. Determination of niobium by X ray fluorescence spectrometry.
NF EN ISO 8754:2003 Produits pétroliers - Détermination de la teneur en soufre - Spectrométrie de fluorescence de rayons X dispersive en énergie
NF X21-073*NF ISO 16243:2012 Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS).
NF ISO 16243:2012 Analyse chimique des surfaces - Enregistrement et notification des données en spectroscopie de photoélectrons par rayons X (XPS)
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF M60-460*NF ISO 16795:2006 Nuclear energy - Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
NF M07-110*NF EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
XP A06-379-1999 Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF EN ISO 20847:2004 Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Spectrométrie de fluorescence de rayons X dispersive en énergie
NF M07-145*NF EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method.
NF M07-053:1995 Petroleum products. Determination of sulfur content. Energy-dispersive-X-ray fluorescence method.
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF M07-095*NF EN ISO 14597:1999 Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry.
NF X31-013*NF EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
FD A06-326*FD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al in ferro-silicon by X-ray fluorescence spectrometry
NF X31-013:2013 Soil quality - Screening soils for selected elements by energy dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
NF A06-377*NF EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique.
NF V03-918-2:1997 Rapeseed. Determination of glucosinolates content. Part 2 : method using X-ray fluorescence spectrometry.
NF EN 16424:2014 Caractérisation des déchets - Méthode de dépistage pour la détermination de la composition élémentaire au moyen d'analyseurs portables de fluorescence X

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, X-ray energy analysis spectrometer

GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
GB/T 36017-2018 Non-destructive testing instruments—X-ray fluorescence analysis tube
GB/T 34534-2017 Coke—Determination of ash composition—X-ray fluorescence spectrometric method
GB/T 33502-2017 Surface chemical analysis—Recording and reporting data in X-ray photoelectron spectroscopy（XPS）
GB/T 35734-2017 Portable tube-excited X-ray fluorescence analysis equipment－Classification, safety requirements and test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, X-ray energy analysis spectrometer

GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales
GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
GB/T 25184-2010 Verification method for X-ray photoelectron spectrometers
GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
GB/T 28892-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Description of seleted instrumental performance parameters
GB 16355-1996 Radiation protection standards for X-ray diffraction and fluorescence analysis equipment
GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
GB/T 11685-2003 Measurement procedures for semiconductor X-ray detector system and semiconductor X-ray energy spectrometers
GB/T 20726-2015 Microbeam analysis.Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis
GB/T 8156.10-1987 Aluminium fluoride for industrial use--Determination of sulphur content--X-ray fluorescence spectrometric method
GB/T 17416.2-1998 Method for chemical analysis of Zirconium ores.Determination of Zirconium and Hafnium contents.X-ray fluorescence spectrometric method
GB/Z 32490-2016 Procedure for determination of background by X-ray photoelectron spectroscopy for surface chemical analysis
GB/T 16597-1996 Analytical methods of metallurgical products. General rule for X-ray fluorescence spectrometric methods
GB/T 28632-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution
GB/T 17359-1998 General specification of X-ray EDS quantitative analysis for EPMA and SEM
GB/Z 42520-2023 Guidelines for X-ray fluorescence spectrometric laboratory practice for the analysis of iron ores
GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
GB/T 17040-1997 Petroleum products--Determination of sulfur--Energy-dispersive X-ray fluorescence spectroscopy
GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method
GB/T 21114-2007 X-ray Fluorescence Spectrochemical Analysis of Refractory Materials - Molten Glass Disk Method
GB/T 8359-1987 Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer
GB/T 17362-2008 Scanning electron microscope X-ray energy spectrum analysis method for gold products
GB/T 17362-1998 Nondestructive method of X-ray EDS analysis with SEM for gold jewelry
GB/T 14506.28-1993 Silicate rocks. Determination of contents of major and minor elements. X-ray fluorescence spectrometric method
GB/T 28633-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
GB/T 14849.5-2010 Chemical analysis of slion metal.Part 5: Determination of elements content.Analysis using an X-ray fluorescence method
GB/T 17040-2008 Standard test method for sulfur in petrolem and petroleum products by energy dispersive X-ray fluorescence spectrometry
GB/T 6609.30-2009 Chemical analysis methods and determination of physical performance of alumina.Part 30:X-ray fluorescence spectrometric method for the determination content of trace elements
GB/T 29556-2013 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution,analysis area,and sample area viewed by the analyser
GB/T 14849.5-2014 Methods for chemical analysis of silicon metal.Part 5:Determination of impurity contents.X-ray fluorescence method
GB/T 17723-1999 Surface composition analysis method of gold-plated products by EDX
GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
GB/T 17507-1998 General specification of thin biological standards for X-Ray-Ray EDS microanalysis in electron microscope
GB/T 12162.4-2010/ISO 4037 4-2004 X and gamma reference radiation for calibrating dosimeters and dose rate meters and determining their energy response Part 4: Calibration of site and personal dosimeters in low energy X-ray reference radiation fields
GB/T 12162.4-2010/ISO 4037 4:2004 X and gamma reference radiation for calibrating dosimeters and dose rate meters and determining their energy response Part 4: Calibration of site and personal dosimeters in low energy X-ray reference radiation fields
GB/T 12162.4-2010 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy.Part 4:Calibration of area and personal dosemeters in low energy X reference radiation fields
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
GB/T 25188-2010 Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy

KR-KS, X-ray energy analysis spectrometer

KS D ISO 15472-2003(2023)
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 17054-2018 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
KS D ISO 14706-2003(2023)
KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 17054-2018(2023) Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
KS M ISO 14597-2003(2023)

Professional Standard - Nuclear Industry, X-ray energy analysis spectrometer

EJ/T 684-2016 Portable Energy Dispersive X-ray Fluorescence Analyzer
EJ/T 767-1993 X-ray fluorescence analyzer excited by radioactive sources
EJ/T 805-1993 Low Energy Photon Sources for X-ray Fluorescence Analysis
EJ/T 684-1992 Portable source excited X-ray fluorescence analyzer
EJ/T 633-1992 Tube Excitation Energy Dispersive X-ray Fluorescence Analyzer

National Metrological Technical Specifications of the People's Republic of China, X-ray energy analysis spectrometer

JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry
JJF 2024-2023

未注明发布机构, X-ray energy analysis spectrometer

BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
BS EN ISO 9167-2:1997(1999) Rapeseed — Determination of glucosinolates content — Part 2 : Method using X - ray fluorescence spectrometry

IN-BIS, X-ray energy analysis spectrometer

Professional Standard - Building Materials, X-ray energy analysis spectrometer

JC/T 1085-2008 X-ray fluorescence analyzer for cement

RU-GOST R, X-ray energy analysis spectrometer

GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
GOST R 55080-2012 Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST 22091.8-1984 X-ray devices. Method of measuring spectral structure and relative spectrum contamination
GOST 22091.7-1984 X-ray devices. The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage
GOST 16865-1979 X-ray apparatus for structural and spectral analyses. Terms and definitions
GOST 34239-2017 Petroleum products. Determination of sulfur content by the method of monochromatic energy dispersive X-ray fluorescence spectrometry
GOST 32139-2013 Petroleum and petroleum products. Determination of sulfur content by method of energy dispersive X-ray fluorescence spectrometry
GOST R 51947-2002 Petroleum and petroleum products. Determination of sulphur by method of energy-dispersive X-ray fluorescence spectrometry
GOST R EN ISO 20847-2010 Petroleum products. Determination of sulfur content in automotive fuels by energy-dispersive X-ray fluorescence spectrometry
GOST R ISO 16243-2016 State system for insuring the uniformity of measurements Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
GOST 33305-2015 Lubricating oils. Method for determination of phosphorus, sulfur, calcium and zinc by energy dispersive X-ray fluorescence spectroscopy

American Society for Testing and Materials (ASTM), X-ray energy analysis spectrometer

ASTM E1621-21 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM D5381-93(2003) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D5381-93(1998) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM D5839-96(2001) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D5839-96(2006) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM C1255-93(1999) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-18 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-93(2005) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-11 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E572-94(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM E572-02a(2006)e1 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a(2006) Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E572-94(2000)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E322-96e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM D5839-15 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM F1375-92(2005) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1588-16 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
ASTM E1621-13 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-98(2004) Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM C1271-99(2006) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM C1271-99 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM C1271-99(2020) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM D5839-96 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM E1588-16a Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E1588-17 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
ASTM E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
ASTM E2465-19 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E2120-00 Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM D6445-99 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
ASTM D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
ASTM E2465-11e1 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM C1271-99(2012) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E322-96(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM E1621-94(1999) Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E1621-22 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM E539-19 Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM E539-90(1996)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
ASTM E539-02 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
ASTM E539-06 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1361-02 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2014)e1 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E539-07 Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E2465-11 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength-Dispersive X-Ray Fluorescence Spectrometry
ASTM E1085-22 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2465-13 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E2465-06 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E572-02a(2006)e2 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E1085-16 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2108-05 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM D4294-98 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4294-90(1998)e1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4294-08 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D4294-08a Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D4294-08ae1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM E572-12 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM E322-12 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E572-13 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E1031-96 Standard Test Method for Analysis of Iron-Making and Steel-Making Slags by X-Ray Spectrometry (Withdrawn 2002)

Professional Standard - Ferrous Metallurgy, X-ray energy analysis spectrometer

YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
YB/T 5336-2006 Quantitative Analysis of Carbide Phase in High Speed Steel by X-ray Diffraction Method

Standard Association of Australia （SAA）, X-ray energy analysis spectrometer

AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
AS 4392.1:1996 Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Titaniferous mineral sands
AS 4392.2:1997 Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Zircon materials
AS 4392.1:1996/Amdt 2:1999
AS 4392.1:1996/Amdt 1:1996
AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
AS ISO 24237:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
AS ISO 19318:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction

Guangdong Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry
DB44/T 1826-2016 Determination of Composition of Alloy Jewelry by Energy Dispersive X-ray Fluorescence Spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, X-ray energy analysis spectrometer

GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
GB/T 16597-2019 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods
GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
GB/T 21114-2019 Refractories—Chemical analysis by X-ray fluorescence(XRF)—Fused cast-bead method
GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
GB/T 40110-2021 Surface chemical analysis—Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
GB/T 41064-2021 Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
GB/T 40196-2021 Method for analysing CCA and ACQ in preservative-treated wood and wood preservatives by X-ray fluorescence spectroscopy
GB/T 6609.30-2022 Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method

Professional Standard - Electricity, X-ray energy analysis spectrometer

DL/T 1151.22-2012 Analytical methods of scale and corrosion products in power plants.Part 22: standard test methods of X-ray fluorescence spectrometry and X-ray diffraction
DL/T 1653-2016 Determination of Chlorine Content in Phosphate Refractory Fuels Energy Dispersive X-ray Fluorescence Spectrometry

Occupational Health Standard of the People's Republic of China, X-ray energy analysis spectrometer

GBZ 115-2002 Radiological standards for X-ray Diffraction and fluorescence analysis equipment

工业和信息化部, X-ray energy analysis spectrometer

YS/T 1033-2015 Determination of element content of dry anti-seepage materials by X-ray fluorescence spectrometry
YS/T 806-2020 Chemical analysis methods for aluminum and aluminum alloys Determination of elemental content X-ray fluorescence spectrometry
YS/T 483-2022 Analysis methods for copper and copper alloys X-ray fluorescence spectrometry (wavelength dispersion type)
YS/T 581.15-2012 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of elemental content by X-ray fluorescence spectrometry (tablet pressing) method
YS/T 575.23-2021 Methods of chemical analysis of bauxite ores Part 23: Determination of elemental content X-ray fluorescence spectrometry
HG/T 6114-2022 Rapid detection method for heavy metals in waste acid: energy-dispersive X-ray fluorescence spectrometry

International Electrotechnical Commission (IEC), X-ray energy analysis spectrometer

IEC 62495:2011 Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube

Institute of Electrical and Electronics Engineers (IEEE), X-ray energy analysis spectrometer

IEEE 759-1984 Test procedures for semiconductor X-ray energy spectrometers

Professional Standard - Electron, X-ray energy analysis spectrometer

SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum

Professional Standard - Commodity Inspection, X-ray energy analysis spectrometer

SN/T 2079-2008 Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry
SN/T 3377-2012 Determination of lead in paints.Semiquantitative screening by energy dispersive X-ray fluorescence spectrometric method
SN/T 3318.2-2015 Chemical analysis of zirconium sand.Part 2:Determination of zirconium, iron and titanium contents.Wavelength dispersion X-ray fluorescence spectrometric method
SN/T 3321.3-2015 Analysis method of limestone and dolomite.Part 3:Determination of primary and secondary component content.Wavelength dispersive X-ray fluorescence spectrometric method
SN/T 3816-2014 Screening of cobalt,arsenic,chromium,tin,bromine and lead in rubber products.Energy dispersive X-ray fluorescence spectrometric method

Professional Standard - Petrochemical Industry, X-ray energy analysis spectrometer

SH/T 0742-2004 Standard test method for sulfur in gasoline by energy-dispersive X-ray fluorescence spectrometry
NB/SH/T 0822-2010 Standard test method for determination of phosphorus,sulfur,calcium,and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy

GOSTR, X-ray energy analysis spectrometer

GOST ISO 8754-2013 Petroleum products. Determination of sulfur content by energy-dispersive X-ray fluorescence spectrometry
GOST 32139-2019 Petroleum and petroleum products. Determination of sulfur content by energy dispersive X-ray fluorescence spectrometry method
GOST ISO 20847-2014 Petroleum products. Determination of sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry

Professional Standard - Non-ferrous Metal, X-ray energy analysis spectrometer

YS/T 703-2014 Method for chemical analysis of Limstone.Determination of element contents.X-ray fluorescence spectrometric method
YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 581.10-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 10:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 273.11-2006 Chemical analysis methods and physical properties of cryolite. Part 11:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 581.16-2008 Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 575.23-2009 Method for chemical analysis of aluminum ores.Part 23:Determination of element contents X-ray fluorescence spectrometric method
YS/T 483-2005 Methods for analysis of copper and copper alloys-X-Ray fluorescence spectrometric (wavelength dispersive)
YS/T 581.18-2012 Chemical analysis methods and physical properties of Aluminum Fluoride.Part 18:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 273.15-2012 Chemical analysis methods and physical properties of cryolite.Part 15:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 820.19-2012 Methods for chemical analysis of laterite nickel ores.Part 19:Determination of aluminum,chromium,iron,magnesium,manganese,nickel and silicon contents.Energy-dispersive X-ray fluorescence spectrometry
YS/T 806-2012 Chemical analysis method for rare earth in aluminium and aluminium alloys.Determination of La,Ce,Pr,Nd,Sm contents X-ray fluorescence spectrometric method
YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method
YS/T 63.16-2019 Test method for carbonaceous materials used in the production of aluminium——Part 16: Determination of element contents——Wavelength dispersive X-ray fluorescence spectrometric method

BE-NBN, X-ray energy analysis spectrometer

NBN-ISO 8754:1993 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence method

Taiwan Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

CNS 14472-2000 Method of test for sulfur in petroleum products by energy-dispersive X-ray fluorescence spectroscopy

Danish Standards Foundation, X-ray energy analysis spectrometer

DS/EN ISO 8754:2004 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
DS/EN ISO 20847:2004 Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/EN 10315:2006 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
DS/ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
DS/EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method

Henan Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB41/T 1706-2018 Determination of Potassium Content in Compound Fertilizers by Energy Dispersive X-ray Fluorescence Spectrometry
DB41/T 1705-2018 Determination of Phosphorus Content in Compound Fertilizers Energy Dispersive X-ray Fluorescence Spectrometry

Professional Standard - Energy, X-ray energy analysis spectrometer

NB/SH/T 6043-2021 Determination of Lead, Iron and Manganese in Gasoline Energy Dispersive X-ray Fluorescence Spectrometry

American National Standards Institute （ANSI), X-ray energy analysis spectrometer

ANSI/ASTM D6247:1998 Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry

Group Standards of the People's Republic of China, X-ray energy analysis spectrometer

T/NAIA 0128-2022 Rapid Determination of Aluminum Hydroxide Determination of Element Content by X-ray Fluorescence Spectroscopic Analysis (Tablet)
T/KJFX 002-2017 Rapid Determination of Cadmium in Rice and Its Products by Energy Dispersive X-ray Fluorescence Spectrometry
T/IMPCA 0001-2021 Test method for X-ray fluorescence spectrum analysis of alloying elements in steel and its products of chemical plant
T/CEC 423-2020 Determination of Sulfur, Phosphorus and Chlorine Content in Mineral Insulating Oils and Lubricating Oils Energy-dispersive X-ray Fluorescence Spectrometry
T/LNWTA 003-2019 Determination of elements in the pipe for drinking water —Energy dispersive X-ray fluorescence spertroscopy (EDXRF) method
T/FJEMIA 6-2022 Rapid screening of copper, zinc, lead, nickel, chromium and arsenic in soil by portable energy dispersive X-ray fluorescence spectrometry

VN-TCVN, X-ray energy analysis spectrometer

TCVN 3172-2008 Petroleum and petroleum products.Determination of sulfur by energy-dispersive X-ray fluorescence spectrometry

BR-ABNT, X-ray energy analysis spectrometer

ABNT NBR 14533-2011 Petroleum and petroleum products - Determination of sulfur spectrometry X-ray fluorescence (energy dispersive)

Shaanxi Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB61/T 1162-2018 Determination of Heavy Metal Elements in Soil by Energy Dispersive X-ray Fluorescence Spectrometry
DB61/T 1580-2022 Determination of Inorganic Elements in Soils and Sediments Energy Dispersive X-ray Fluorescence Spectrometry

国家质量监督检验检疫总局, X-ray energy analysis spectrometer

SN/T 4567-2016 Determination of phosphorus and arsenic in industrial yellow phosphorus by energy dispersive X-ray fluorescence spectrometry

Yunnan Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB53/T 549-2014 Determination of phosphorus and arsenic content in industrial yellow phosphorus Energy dispersive X-ray fluorescence spectrometry
DB53/T 423-2012 Determination of Phosphorus, Manganese, Titanium, Chromium, Copper, Vanadium in Ferrophosphorus Energy Dispersive X-ray Fluorescence Spectrometry
DB53/T 550-2014 Determination of lead, arsenic, cadmium, iron, manganese in calcium hydrogen phosphate energy dispersive X-ray fluorescence spectrometry
DB53/T 639.7-2014 Methods for chemical analysis of direct reduced iron - Part 7: Determination of multiple elements by X-ray fluorescence spectrometry

European Committee for Standardization (CEN), X-ray energy analysis spectrometer

CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
EN 10315:2006 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013)
prEN ISO 13196 rev Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
EN ISO 9167-2:1997 Rapeseed - Determination of Glucosinolates Content - Part 2: Method Using X-Ray Fluorescence Spectrometry

Professional Standard - Textile, X-ray energy analysis spectrometer

FZ/T 01163-2022 Determination of total lead and total cadmium content in textiles and their accessories X-ray fluorescence spectrometry (XRF) analysis method

Lithuanian Standards Office , X-ray energy analysis spectrometer

LST EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
LST EN 10315-2006 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
LST EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)

AENOR, X-ray energy analysis spectrometer

UNE-EN ISO 8754:2004 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
UNE-EN 10315:2007 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
UNE-EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)

Professional Standard - Machinery, X-ray energy analysis spectrometer

JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect
JB/T 8425-1996 Standard test method of X-ray fluorescence spectrometric analysis of content of chromium, nickel, molybdenum and vanadium in iron base dusty spray

Professional Standard - Customs, X-ray energy analysis spectrometer

HS/T 12-2006 Quantitative analysis of talc, chlorite, magnesite mixed phase.Method of X-ray diffractometer

Professional Standard - Chemical Industry, X-ray energy analysis spectrometer

HG/T 6150-2023 X-ray fluorescence spectrometry method for chemical composition analysis of lubricating oil hydroisomerization catalyst

Professional Standard - Rare Earth, X-ray energy analysis spectrometer

XB/T 610.1-2007 Chemical analysis methods for samarium cobalt permanent magnet alloy powdep- Determination of samarium and cobalt- X-ray fluorescence sPedrometric method

PT-IPQ, X-ray energy analysis spectrometer

NP EN ISO 14596:2001 Petroleum products Determination of sulfur content Wavelength-dispersive X-ray fluorescence spectrometry(ISO 14593:1998)

ES-UNE, X-ray energy analysis spectrometer

UNE-EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013) (Endorsed by AENOR in September of 2015.)

Professional Standard - Environmental Protection, X-ray energy analysis spectrometer

HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method

Professional Standard - Geology, X-ray energy analysis spectrometer

DZ/T 0279.10-2016 Methods of Analysis of Regional Geochemical Samples - Part 10: Determination of Chlorine and Bromine Quantification Powder Compression - X-ray Fluorescence Spectrometry

Anhui Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB34/T 2127.2-2014 Methods of Analysis of Samples for Regional Geochemical Surveys Part 2: Determination of Multielement Content by X-ray Fluorescence Spectrometry

Fujian Provincial Standard of the People's Republic of China, X-ray energy analysis spectrometer

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection