ZH
RU
ES
Mass Spectrum Peak Intensity
Mass Spectrum Peak Intensity, Total:498 items.
In the international standard classification, Mass Spectrum Peak Intensity involves: Rubber, Plastics, Rubber and plastics products, Construction materials, Nuclear energy engineering, Analytical chemistry, Metrology and measurement in general, Sugar. Sugar products. Starch, Protection against fire, General methods of tests and analysis for food products, Geology. Meteorology. Hydrology, Fibre optic communications, Iron and steel products, Optoelectronics. Laser equipment, Road vehicles in general, Pesticides and other agrochemicals, Electromechanical components for electronic and telecommunications equipment, Water quality, Products of the textile industry, Powder metallurgy, Wood-based panels, Paper and board, Semiconducting materials, Non-ferrous metals, Cellular materials, Testing of metals, Milk and milk products, Refractories, Road engineering, Welding, brazing and soldering, Protection against crime, Fuels, Raw materials for rubber and plastics, Materials for aerospace construction, Photography, Soil quality. Pedology, Air quality, Ceramics, Linear and angular measurements, Radiation measurements, Electrical wires and cables, Aerospace electric equipment and systems, Sacks. Bags, Protection against electric shock, Furniture, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Coatings and related processes used in aerospace industry, Space systems and operations, Reinforced plastics, Organic chemicals, Semiconductor devices, Products of the chemical industry, Solar energy engineering, Springs, Fasteners, Adhesives, Biology. Botany. Zoology, Farming and forestry, Petroleum products in general, Valves, Packaging materials and accessories, Cereals, pulses and derived products, Non-metalliferous minerals.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mass Spectrum Peak Intensity
- GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
- GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
- GB/T 23409-2009 Determination of residues of oxytetracycline,tetraycline chlotetracycline,and doxycycline in royal jelly.LC-MS/MS method
- GB/T 31161-2014 Classification for solar proton event intensity
- GB/T 16270-2009 High strength structural steel plates in the quenched and tempered condition
- GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
- GB/T 1697-2001 Ebonite-Determination of impact strength
- GB/T 2438-2002 Ebonite--Determination of crushing strength
- GB/T 1700-2001 Ebonite-Determination of shearing strength
- GB/T 19189-2011(英文版) Quenched and tempered high strength steel plate for pressure vessels
- GB 19189-2003 Quenched and tempered high strength steel plates for pressure vessels
- GB 19189-2011 Quenched and tempered high strength steel plates for pressure vessels
- GB/T 12626.9-1990 Hard fibreboard--Determination of bending strength
- GB/T 12496.6-1999 Test methods of wooden activated carbon-Determination of abrasion resistance
- GB/T 10007-2008 Rigid cellular plastics.Determination of shear strength
- GB/T 10007-1988 Cellular plastics--Determination of shear strength of rigid materials
- GB/T 3851-1983 Hardmetals--Determination of transverse rupture strength
- GB/T 3851-2015 Hardmetals.Determination of transverse rupture strength
- GB/T 30202.3-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 3 : Abrasive resistance and compression strength
- GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
- GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
- GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
- GB/T 1701-2001 Ebonite-Determination of tensile strength and elongation at break
- GB/T 10418-2002 Steel bonded tungsten carbides--Determination of transverse rupture strength
- GB/T 18932.23-2003 Method for the determination of oxytetracycline,tetracycline,chlortetacycline and doxycycline residues in honey-LC-MS-MS method
- GB/T 29558-2013 Surface chemical analysis.Auger electron spectroscopy.Repeatability and constancy of intensity scale
- GB/T 42488-2023 Soil Quality Determination of Inorganic Nitrogen 15N Abundance in Soil Stable Isotope Ratio Mass Spectrometry
- GB/T 713.6-2023 Steel plates and strips for pressure equipment - Part 6: Quenched and tempered high strength steels
- GB/T 28633-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
- GB/T 6017-1999 Butadiene for industrial use-Determination of purity and hydrocarbon impurities-Gas chromatographic method
- GB/T 6017-2008 Butadiene for industrial use.Determination of purity and hydrocaibon impurities.Gas chromatographic method
- GB/T 6344-2008 Flexible celluar polymeric materials.Determination of tensile strength and elongation at break
- GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials
- GB/T 32495-2016 Surface chemical analysis.Secondary-ion mass spectrometry.Method for depth profiling of arsenic in silicon
SE-SIS, Mass Spectrum Peak Intensity
- SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- SIS 11 26 18-1974 Hardmetals. Determination of transverse rupture strength
- SIS SS 11 26 18-1982 Powder metallurgy - Hardmetals - Determination of trans verse rupture strength
AENOR, Mass Spectrum Peak Intensity
- UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
- UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- UNE-EN ISO 3327:2010 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
- UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
NZ-SNZ, Mass Spectrum Peak Intensity
- AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength
ES-UNE, Mass Spectrum Peak Intensity
- UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
- UNE-EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
Group Standards of the People's Republic of China, Mass Spectrum Peak Intensity
- T/GDC 242-2023 Modified High Density Polyethylene (Ds PE) Double Order Peak Enhancement Tube
- T/GZHG 024-2022 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced buried drainage pipe
- T/GDC 84-2021 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced drainage pipe for buried
- T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe
- T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
- T/SSEA 0213-2022 Quenched and tempered high-strength steel plates for coal mine hydraulic supports
- T/SSEA 0049-2020 Quenched and tempered high strength steel plate with low welding crack sensitivity for pressure vessel
- T/SDAS 625-2023 High-yield and quality-improving cultivation techniques for strong gluten wheat in light-moderate saline-alkali soil
- T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
British Standards Institution (BSI), Mass Spectrum Peak Intensity
- BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
- BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BS ISO 20903:2019 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
- BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- 21/30433501 DC BS EN 14488-3. Testing sprayed concrete - Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS EN 1875-3:2023 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of tear strength. Trapezoidal method (five-highest-peak calculation)
- BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- BS ISO 1922:2012 Rigid cellular plastics. Determination of shear strengt
- BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
- BS ISO 11814:2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
- PD ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
- BS ISO 15179:2022 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
- BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- BS EN ISO 8067:2009 Flexible cellular polymeric materials. Determination of tear strength
- BS EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
- BS EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength(ISO 3327:2009)
- BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
- BS EN ISO 13161:2015 Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry
- 21/30369548 DC BS ISO 15179. Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
- BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
- BS ISO 24236:2005 Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale
- BS ISO 14317:2007 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
- BS ISO 14317:2015 Sintered metal materials excluding hardmetals. Determination of compressive yield strength
- BS EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
- BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- BS ISO 10260:1992 Water quality. Measurement of biochemical parameters. Spectrometric determination of the chlorophyll-a concentration
Association Francaise de Normalisation, Mass Spectrum Peak Intensity
- NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
- NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
- NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
- NF EN 237:2005 Produits pétroliers liquides - Essence - Détermination des basses teneurs en plomb par spectrométrie d'absorption atomique
- NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
- NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
- NF C93-858:1997 Dielectric strength member used in optical fibre cables.
- NF X21-064*NF ISO 23830:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.
- NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
- NF A95-423:1993 Hardmetals. Determination of transverse rupture strength.
- NF EN 14488-3:2006 Essais pour béton projeté - Partie 3 : résistances à la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipèdiques en béton renforcé par des fibres
- NF A95-423*NF EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- NF A95-431:1993 Hardmetals. Determination of (the magnetization) coercivity.
- XP A89-536*XP ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
- NF M60-808:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry.
- NF P19-122*NF EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure.
- NF EN 1875-3:2023 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance au déchirement - Partie 3 : méthode sur éprouvettes trapézoïdales (calcul des cinq pics les plus hauts)
- NF T56-108*NF EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break.
- NF X21-059*NF ISO 24236:2006 Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale.
- NF A95-323*NF EN ISO 3325:1999 Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength.
- NF EN ISO 3325:1999 Matériaux métalliques frittés à l'exclusion des métaux-durs - Détermination de la résistance à la rupture transversale
- NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
- NF V03-768:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels.
- NF V03-768:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
- NF V03-768*NF EN 15948:2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
International Organization for Standardization (ISO), Mass Spectrum Peak Intensity
- ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- ISO/CD 6863 Preparation of Plutonium and Uranium spikes for Isotope Dilution Mass Spectrometry (IDMS)
- ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
- ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
- ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
- ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- ISO 2474:1972 Ebonite; Determination of crushing strength
- ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- ISO 2473:1972 Ebonite — Determination of cross-breaking strength
- ISO 1922:1972 Title missing - Legacy paper document
- ISO 3327:1975 Title missing - Legacy paper document
- ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- ISO 3327:1982 Hardmetals; Determination of transverse rupture strength
- ISO 1922:2018 Rigid cellular plastics - Determination of shear properties
- ISO 1922:2012 Rigid cellular plastics - Determination of shear strength
- ISO 11814:2002 | IDF 162:2002 Dried milk — Assessment of heat treatment intensity — Method using high-performance liquid chromatography
- ISO 20585:2005 Wood-based panels - Determination of wet bending strength after immersion in water at 70℃ or 100℃ (boiling temperature)
- ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
- ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- ISO 1922:1981 Cellular plastics; Determination of shear strength of rigid materials
- ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method
- ISO 1922:2001 Rigid cellular plastics - Determination of shear strength
- ISO 16984:2003 Wood-based panels - Determination of tensile strength perpendicular to the plane of the panel
- ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
- ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
- ISO 2472:1975 Ebonite — Determination of tensile strength and elongation at break
- ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO 15179:2022 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
- ISO 10260:1992 Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration
- ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
- ISO 24236:2005 Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale
- ISO 8186:1989 Ambient air; determination of the mass concentration of carbon monoxide; gas chromatographic method
- ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
- ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
- ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
- ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO 14317:2006 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
- ISO 3325:1996 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
German Institute for Standardization, Mass Spectrum Peak Intensity
- DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
- DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
- DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...
- DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).
- DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
- DIN EN 1875-3:2023-04 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation); German version EN 1875-3:2023
- DIN EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
- DIN EN ISO 3327:2009-10 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009); German version EN ISO 3327:2009
- DIN EN ISO 13161:2016-01 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011); German version EN ISO 13161:2015 / Note: To be replaced by DIN EN ISO 13161 (2019-11).
- DIN EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure; German version EN 1521:1996
- DIN CEN/TS 17337:2019-08*DIN SPEC 33981:2019-08 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy; German version CEN/TS 17337:2019
- DIN EN ISO 13161:2016 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011)
- DIN 55428-2:1998 Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
YU-JUS, Mass Spectrum Peak Intensity
- JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength
- JUS C.A4.053-1986 Mechanical testing of metals. Determination of transverse rupturestrength of hardmetals
- JUS H.B9.100-1997 Butadiene - Determination ofpurity and hydrocarbon impurities - Gas chromatographic method
Danish Standards Foundation, Mass Spectrum Peak Intensity
- DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- DS/ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
- DS 433.3:1989 Aerated lightweight concrete components. Compressive strength
- DS 433.4:1989 Aerated light weight concrete components. Bending strength
- DS/EN 23327:1994 Hardmetals. Determination of transverse rupture strength
- DS/EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- DS/EN 23326:1994 Hardmetals-Determination of (the magnetization) coercivity
- DS/ISO 11814:2003 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
- DS/EN 1348:2007 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
- DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
Japanese Industrial Standards Committee (JISC), Mass Spectrum Peak Intensity
- JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
- JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- JIS K 0153:2015 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
- JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature
- JIS K 0164:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
- JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
- JIS H 0615:2021 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
- JIS K 0400-80-10:2000 Water quality -- Measurement of biochemical parameters -- Spectrometric determination of the chlorophyll-a concentration
ZA-SANS, Mass Spectrum Peak Intensity
- SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
American Society for Testing and Materials (ASTM), Mass Spectrum Peak Intensity
- ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
- ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
- ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
- ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
- ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
- ASTM A529/A529M-00 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-01 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-02 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-04 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM D1937-03 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM D1180-57(1976) Method of Test for Bursting Strength of Round Rigid Plastic Tubing
- ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
- ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
- ASTM A529/A529M-14 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM D1937-05 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM A529/A529M-05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM E1438-91(2001) Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
- ASTM E1438-91(1996) Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
- ASTM F88-00 Standard Test Method for Seal Strength of Flexible Barrier Materials
- ASTM B406-96(2000) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM F1116-88(1995) Standard Test Method for Determining Dielectric Strength of Overshoe Footwear
- ASTM B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM D1937-18 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM B406-96 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM F1116-21 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
- ASTM A78-43 Specification for Low Tensile Strength Carbon-Steel Plates of Structured Quality for Welding
- ASTM C495-99a Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- ASTM C495/C495M-12(2019) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- ASTM B406-96(2021) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM F1116-14 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
- ASTM B406-96(2015) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM C495-07 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM E1162-87(2001) Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM E1162-87(1996) Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM E1438-06 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
- ASTM A572-79 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Steels Of Structural Quality
- ASTM A572-82 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium steels of Structural Quality
- ASTM E490-00a(2019) Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
- ASTM E490-22 Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
- ASTM F1554-07ae1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- ASTM C87/C87M-17 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM E721-07 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
- ASTM E721-01 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
- ASTM E721-94 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
- ASTM C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
- ASTM UOP702-09 Impurities in Distilled High Purity Cumene by GC
- ASTM UOP555-10 Trace Impurities in High-Purity Benzene and Cyclohexane by GC
- ASTM A592/A592M-10(2020) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
- ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
- ASTM E892-87(1992) Tables for Terrestrial Solar Spectral Irradiance at Air Mass 1.5 for a 37-Deg Tilted Surface (Withdrawn 1999)
- ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM D5060-07 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
- ASTM A514-77 Standard Specification for High-Yield- Strength, Quenched And Tempered Alloy Steel Plate, Suitable For Welding
- ASTM A514/A514M-18e1 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
- ASTM C87-04 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM C87-03 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
SAE - SAE International, Mass Spectrum Peak Intensity
- SAE J368-1993 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
- SAE J368-1968 High Strength@ Quenched@ and Tempered Structural Steels
- SAE J2340-2017 Categorization and Properties of Dent Resistant@ High Strength@ and Ultra High Strength Automotive Sheet Steel
- SAE AMS4219-1966 Aluminum Alloy Castings@ Premium Quality@ High Strength 7. 0si - 0.60Mg
- SAE AMS3659D-2008 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved
- SAE AS22759/81B-2007 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200°C, 600 VOLTS
- SAE AS22759/82-2000 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Light Weight@ Nickel Coated@ High Strength or Ultra High Strength Copper Alloy@ 260 Degrees Celsius@ 600 Volts
- SAE AS22759/82C-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
- SAE AS22759/81C-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
- SAE J271-1998 Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles
- SAE J271-1972 SPECIAL QUALITY HIGH TENSILE@ HARD DRAWN MECHANICAL SPRING WIRE AND SPRINGS
- SAE J271-1994 SPECIAL QUALITY HIGH TENSILE, HARD DRAWN MECHANICAL SPRING WIRE AND SPRINGS
- SAE AMS3658D-2008 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
Society of Automotive Engineers (SAE), Mass Spectrum Peak Intensity
- SAE J368-1988 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
- SAE J2340-1999 Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel
- SAE AMS5315D-1987 Ductile (Nodular) Iron Castings, Sand, 60,000 psi (415 MPa) Tensile Strength, Ferritize Annealed
- SAE AMS3659-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress Relieved
- SAE AMS3659A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved
- SAE AMS3659B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved
- SAE AS22759/82B-2007 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260°C, 600 VOLTS
- SAE AS22759/81A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200°C, 600 VOLTS
- SAE AS22759/82A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260°C, 600 VOLTS
- SAE AIR7929-2021 Qualification of Percon 24, a New High-Strength Conductor Alloy to AS29606
- SAE AS22759/81C-2020 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
- SAE AS22759/82C-2020 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
- SAE AS22759/82D-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
- SAE AS22759/81D-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
- SAE AMS3657E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
- SAE J271-1988 SPECIAL QUALITY HIGH TENSILE, HARD DRAWN MECHANICAL SPRING WIRE AND SPRINGS
- SAE AMS3657-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
- SAE AMS3659C-1998 Polytetrafluoroethylene Extrusions Premium Strength, Sintered and Stress-Relieved
- SAE AMS3657A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
- SAE AMS3657B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
- SAE AMS3658A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
- SAE AMS3658B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
- SAE AMS3658-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress Relieved, Radiographically Inspected
RU-GOST R, Mass Spectrum Peak Intensity
- GOST 8.195-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring spectral density of radiance, spectral density of radiant intensity, spectral density of irradiance, radiant intensity and irradiance in the wavel
- GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
- GOST 24977.2-1981 Tellurium high purity. Spectral method for the determination of impurities
- GOST R 8.861-2013 State system for ensuring the uniformity of measurements. Means of measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,2-25,0 mkm. Verification procedure
- GOST 24977.1-1981 Tellurium high purity. Method of chemical and spectral for the ditermination of impurities
- GOST 21195-1984 Spectral high-intensity gas-discharge sources of optical radiation. General specifications
- GOST 22518.1-1977 Lead of high purity. Chemical spectral method for the determination of additions
- GOST 13525.3-1997 Pulp and paper. Method for determination of tearing resistance (Elmendorf method)
- GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
- GOST 26988-1986 Fibre board. Method for determination of ultimate tensile strength perpendicular to board face
Lithuanian Standards Office , Mass Spectrum Peak Intensity
- LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- LST EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
- LST ISO 11814:2005 Dried milk. Assessment of heat treatment intensity. Method using high-performance liquid chromatography (idt ISO 11814:2002)
- LST EN 1348-2007 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
European Committee for Standardization (CEN), Mass Spectrum Peak Intensity
- prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- prEN 23327-1992 Hardmetals; determination of transverse rupture strength (ISO 3327:1982)
- EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
- EN 23327:1993 Hardmetals - Determination of Transverse Rupture Strength (ISO 3327: 1982)
- EN 16602-70-13:2015 Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
- EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
- EN ISO 8067:1995 Flexible Cellular Polymeric Materials - Determination of Tear Strength (ISO 8067 : 1989)
- EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
- CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
- EN 16602-70-37:2014 Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
RO-ASRO, Mass Spectrum Peak Intensity
- STAS 10077-1975 EBONITE Determination of tensile strength
- STAS 10078-1975 EBONITE Determination of crushing st reng th
- STAS 10079-1975 EBONITE Determination of cross-breaking strength
- STAS 7310-1987 RIGID PLASTICS Determination of Izod impact strength
- STAS SR ISO 10260:1996 Water quality - Measurement of biochemical parameters -Spectrometric determination of the chlorophylle - a concentration
- STAS 6912-1984 PLASTICS Petcrmination of crack strength by tcnsion of polyethylenes under tensio- active snbstances aetion
Anhui Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
- DB34/T 1538-2011 Determination of amitrole residue in the honey by liquid chromatography tandem mass spectrometry
Taiwan Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
- CNS 11979-1987 Method of Test for Crushing Strength and Modulus of Alumina and Fireclay Plastic Refractories
- CNS 11977-1987 Method of Test for Crushing Strength and Modulus of Repture of Light Weight Castable
- CNS 7408-1981 Compression Test for Rigic Materials of Cellular Plastics
- CNS 7409-1981 Determination of Shear Strength of Rigid Cellular Plastics
- CNS 14779-2003 Method of test for the particle cylindrical crushing strength of lightweight coarse aggregates
- CNS 13585-1995 Method of Test for Compressive and Flexuval Strength of Alumina Cement Mortar
Professional Standard - Meteorology, Mass Spectrum Peak Intensity
- QX/T 136-2011 Classification for the intensity of solar proton event
Professional Standard - Aviation, Mass Spectrum Peak Intensity
- HB 5480-1991 High-strength aluminum alloy high-quality castings
- HB 5360-1986 High-strength steel parts low hydrogen embrittlement cadmium plating-titanium quality inspection
Professional Standard - Electron, Mass Spectrum Peak Intensity
- SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
- SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
- SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
- SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry
Military Standard of the People's Republic of China-General Armament Department, Mass Spectrum Peak Intensity
Professional Standard - Commodity Inspection, Mass Spectrum Peak Intensity
- SN/T 1737.6-2010 Determination of herbicide residues.Part 6:Determination of amitrole residues in food by HPLC-MS/MS method
National Health Commission of the People's Republic of China, Mass Spectrum Peak Intensity
- GB 23200.6-2016 National food safety standards— Determination of amitrole residue in foods Liquid chromatography - mass spectrometry
未注明发布机构, Mass Spectrum Peak Intensity
- BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
- BS ISO 10260:1992(2014) Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll - a concentration
- BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
TR-TSE, Mass Spectrum Peak Intensity
- TS 2708-1977 EBONITE - DETERMINATION OF CRUSHING STRENGTH
- TS 1855-1975 RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH
- TS 2707-1977 EBONITE DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
- TS 3289-1979 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE INSULATING CONCRETE TEST SPECIMENS
- TS 2012-1975 FLEXIBLE CELLULAR MATERIALS DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Mass Spectrum Peak Intensity
Professional Standard - Chemical Industry, Mass Spectrum Peak Intensity
IN-BIS, Mass Spectrum Peak Intensity
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mass Spectrum Peak Intensity
- GB/T 19189-2011 Quenched and tempered high strength steel plates for pressure vessels
(U.S.) Parachute Industry Association, Mass Spectrum Peak Intensity
Indonesia Standards, Mass Spectrum Peak Intensity
Korean Agency for Technology and Standards (KATS), Mass Spectrum Peak Intensity
- KS M ISO 1922:2010 Rigid cellular plastics-Determination of shear strength
- KS M ISO 1922:2013 Rigid cellular plastics — Determination of shear strength
- KS D ISO 3327:2011 Hardmetals-Determination of transverse rupture strength
- KS B 0818-2012 Hardmetals－Determination of transverse rupture strength
- KS B 0818-2001(2011) Hardmetals－Determination of transverse rupture strength
- KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
- KS F 2461-2014 Testing method for compressive strength of lightweight insulating concrete
- KS L 5504-2006 Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories
- KS L 5504-1986 Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories
- KS M ISO 8067:2008 Flexible cellular polymeric materials－Determination of tear strength
- KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
- KS F 2461-2000(2010) Testing method for compressive strength of lightweight insulating concrete
- KS I ISO 10260:2006 Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
- KS I ISO 10260-2006(2021) Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
- KS K 0768-2012 Test method for bursting strength of geotextile
- KS K 0768-2015 Test method for bursting strength of geotextile
- KS K 0769-2007 Test method for tearing strength of geotextile
- KS M ISO 12986-1:2004 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 1:Determination of bending/shear strength by a three-point method
- KS M ISO 12986-1:2013 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
- KS I ISO 8186:2006 Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
- KS M 9107-1996 Water quality-Measurement of biochemeical parameters(Spectrometric determination of the chlorophyll-a concentration)
- KS I ISO 8186-2006(2016) Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
- KS I ISO 10260-2006(2016) Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
- KS I ISO 8186:2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
- KS I ISO 10703:2019 Water quality — Determination of the activity concentration of radionuclides — Method by high resolution gamma-ray spectrometry
- KS K 0762-2011 Test method for determination of long-term design strength of geotextiles
- KS K 0762-2015 Determination of the long-term design strength of geotextiles
- KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
- KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
- KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
- KS M ISO 1798-2012(2017) Flexible cellular polymeric materials－Determination of tensile strength and elongation at break
- KS M ISO 1798-2012(2022) Flexible cellular polymeric materials－Determination of tensile strength and elongation at break
CEN - European Committee for Standardization, Mass Spectrum Peak Intensity
- EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- PD CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
Professional Standard - Forestry, Mass Spectrum Peak Intensity
- LY/T 1409-1999 Laminated wood plastics.Compreg Determination of static bending
- LY/T 1410-1999 Laminated wood plastics.Compreg Determination of tension strength parallel to face grain
- LY/T 1411-1999 Laminated wood plastics.Compreg Determination of compression Strength parallel to face grain
- LY/T 1408-1999 Laminated wood plastics.Compreg Determination of glueline shear strength parallel to grain
Professional Standard - Building Materials, Mass Spectrum Peak Intensity
- JC/T 578-2009 Method for assessing the uniformity of cement strength
- JC/T 578-1995 Test method of measuring uniformity of cement strength
KR-KS, Mass Spectrum Peak Intensity
- KS D ISO 3327-2011 Hardmetals－Determination of transverse rupture strength
- KS M ISO 7263-2014 Corrugating medium — Determination of the flat crush resistance after laboratory fluting
- KS I ISO 8186-2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
- KS I ISO 10703-2019 Water quality — Determination of the activity concentration of radionuclides — Method by high resolution gamma-ray spectrometry
Professional Standard - Ferrous Metallurgy, Mass Spectrum Peak Intensity
- YB/T 5118-1993 Test method for strength fo fireclay and high alumina plastic refractories
Jilin Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
VN-TCVN, Mass Spectrum Peak Intensity
- TCVN 3118-1993 Heavy weight concrete.Method for the determination of compressive strength
- TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
- TCVN 5048-1990 Hardmetals.Method of determination of transverse rupture strength
- TCVN 3120-1993 Heavy weight concrete.Method for the determination of tensile spliting strength
- TCVN 6662-2000 Water quality.Measurement of biochemical parameters.Spectrometry determination of the chlorophyll-a concentration
- TCVN 5972-1995 Ambient air.Determination of the mass concentration of carbon monoxide.Gas chromatographic method
- TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method
IT-UNI, Mass Spectrum Peak Intensity
Standard Association of Australia （SAA）, Mass Spectrum Peak Intensity
Professional Standard - Aerospace, Mass Spectrum Peak Intensity
- QJ 2199-1991 Test method for flexural strength of rigid foamed plastics
Professional Standard - Public Safety Standards, Mass Spectrum Peak Intensity
- GA/T 2068-2023 Forensic sciences—Screening methods for 16 rodenticides including tetramine in biological samples—LC-MS
ACI - American Concrete Institute, Mass Spectrum Peak Intensity
- ACI ITG-4.2R-2006 Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications
International Dairy Federation (IDF), Mass Spectrum Peak Intensity
- IDF 162-2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
国家市场监督管理总局、中国国家标准化管理委员会, Mass Spectrum Peak Intensity
- GB/T 36171-2018 High strength structural steel plate in the quenched and tempered condition with improved formability
- GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
- GB/T 40186-2021 Determination of genetic material damage strength for microbial mutation breeding—Umu method
- GB/T 6017-2021 Determination of purity and hydrocarbon impurities of butadiene for industrial use—Gas chromatographic method
- GB/T 40109-2021 Surface chemical analysis—Secondary-ion mass spectrometry—Method for depth profiling of boron in silicon
American National Standards Institute （ANSI), Mass Spectrum Peak Intensity
- ANSI/ISO 8776:1988 Imaging Media - Photographic Film - Determination of Folding Endurance
- ANSI/SAE J271-1994 Special Quality High Tensile, Hard Drawn Mechanical Spring Wire and Springs
Gansu Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
- DB62/T 2751-2017 Discrimination of Desertification Intensity of Sandy Grassland in Alpine Pastoral Area
Guangdong Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
- DB44/T 1274-2013 Determination of Gel Strength of Frozen Surimi by Texture Analyzer
Professional Standard - Nuclear Industry, Mass Spectrum Peak Intensity
- EJ/T 896-1994 Determination of U-233 Abundance in UF6 by Gas Mass Spectrometry
American Concrete Institute, Mass Spectrum Peak Intensity
- ACI 363.2R-1998 Guide to Quality Control and Testing of High-Strength Concrete
NL-NEN, Mass Spectrum Peak Intensity
- NEN-ISO 3327:1993 Hardmetals. Determination of transverse rupture strength (ISO 3327:1982)
Fujian Provincial Standard of the People's Republic of China, Mass Spectrum Peak Intensity
- DB35/T 1793-2018 Determination of Biuret in Seawater by Spectrophotometry and Liquid Chromatography-Tandem Mass Spectrometry
CZ-CSN, Mass Spectrum Peak Intensity
- CSN 40 4005-1986 Radioactive substances Radtochemlcal purity determination by paper chromatography
- CSN 40 4006-1986 Radioactive substances. Radiochemical purity determination by thin-layer chromatography
- CSN 42 0892 Cast.5-1980 Testing of sintered carbides. Determination of transverse rupture strength
- CSN 40 4009-1974 Determination of concentrations of heavy metals and foreign mattere in radioactive preparations by emission spectrography
- CSN 40 4007-1986 Radioactive substances. Radiochemical purity determination by gas chromatography
ES-AENOR, Mass Spectrum Peak Intensity
Professional Standard - Light Industry, Mass Spectrum Peak Intensity
- QB/T 4448-2013 Determination of peel strength of flexible overlaid materials in furniture surface
- QB/T 4449-2013 Determination of peel strength of rigid overlaid materials in furniture surface
- QB/T 3655-1999 Determination of peel strength of soft cladding materials on furniture surfaces
- QB/T 3656-1999 Determination of peel strength of hard cladding materials on furniture surfaces
中国气象局, Mass Spectrum Peak Intensity
- QX/T 368-2016 Solar constant and solar spectral irradiance at zero atmospheric mass
HU-MSZT, Mass Spectrum Peak Intensity
GM North America, Mass Spectrum Peak Intensity
- GM GM2901M-2000 Spring Materials - Oil Tempered High Tensile Steel Wire, Valve Spring Quality
PL-PKN, Mass Spectrum Peak Intensity
- PN Z04528-2021-07 P Air purity protection -- Determination of propane-1,3-sultone in workplaces by gas chromatography-mass spectrometry (GC-MS)
Professional Standard - Petrochemical Industry, Mass Spectrum Peak Intensity
- SH/T 1745-2004 Cumene(Isopropylbenzene) for industrial use--Determination of purity and impurities--Gas chromatographic method
- SH/T 1497-2022 Tert-butylalcohol for industrial use --Determination of purity and impurities --Gas chromatographic method
- SH/T 1778-2014 Chemical grade propylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1796-2015 Triethylene glycol for industrial use.Determination of purity and impurities.Gas chromatographic method
- SH/T 1148-2001 Ethylbenzene for industrial use - Determination of purity and hydrocarbon impurities - Gas chromatographic method
- SH/T 1773-2012 1，2，4-Trimethylbenzene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1627.2-1996 Determination of industrial acetonitrile purity and organic impurities by gas chromatography
- SH/T 1054-2022 Determination of purity and impurities of diethylene glycol for industrial use by gas chromatography
- SH/T 1798-2015 1-Hexene for industrial use.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1766.2-2008 Petroleum m-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1674-1999 Cyclohexane for industrial use.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1489-1998 Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1492-2004 1-Butene for industrial use--Determination of purity and hydrocarbon impurities--Gas chromatographic method
- SH/T 1489-2018 Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
- SH/T 1482-2004 Isobutene for industrial use--Determination of purity and hydrocarbon impurities--Gas chromatographic method
- SH/T 1492-1992 Determination of industrial 1-butene purity and hydrocarbon impurities by gas chromatography
- SH/T 1674-2023 Cyclohexane for industrial use―Determination of purity and hydrocarbon impurities－Gas chromatographic method
Defense Logistics Agency, Mass Spectrum Peak Intensity
- DLA DSCC-DWG-04036 REV B-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04035 REV A-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04035 REV B-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04036 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT
United States Navy, Mass Spectrum Peak Intensity
- NAVY MIL-E-22200/10 C (1)-2003 ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER LOW-HYDROGEN MEDIUM, HIGH TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS
国家能源局, Mass Spectrum Peak Intensity
- SH/T 1148-2018 Determination of purity and hydrocarbon impurities of ethylbenzene for industrial use by gas chromatography
(U.S.) Ford Automotive Standards, Mass Spectrum Peak Intensity
American Society of Mechanical Engineers (ASME), Mass Spectrum Peak Intensity
The American Road & Transportation Builders Association, Mass Spectrum Peak Intensity
- AASHTO T 71-2007 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
GM Europe, Mass Spectrum Peak Intensity
- GME GMI 60347-2012 Bond Strength of Dielectrically Produced Welding Seams of Assembly Components in Body Interior Equipment (English/German; This standard may be applied only for current projects incl. 4403 (“Junior”). It is Superceded for all future projects and replaced b
工业和信息化部, Mass Spectrum Peak Intensity
- HG/T 5170-2017 Isotope Abundance Determination of Stable Isotope Deuterium Labeling Reagent Halogenated Benzene by Gas Chromatography-Mass Spectrometry
- SH/T 1482-2020 Determination of purity and hydrocarbon impurities of isobutylene for industrial use by gas chromatography
- SH/T 1492-2020 Determination of purity and hydrocarbon impurities of 1-butene for industrial use by gas chromatography
WRC - Welding Research Council, Mass Spectrum Peak Intensity
- BULLETIN 20-1955 HIGH-STRENGTH@ LOW-ALLOY STEELS: ANALYTICAL CHEMISTRY FOSTERS PROGRESS IN STEELMAKING: STEEL QUALITY
Association of German Mechanical Engineers, Mass Spectrum Peak Intensity
- VDI 2267 Blatt 15-2005 Determination of suspended matter in ambient air - Measurement of the mass concentration of Al, As, Ca, Cd, Co, Cr, Cu, K, Mn, Ni, Pb, Sb, V, Zn as part of dust precipitation by mass spectrometry (ICP-MS)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Mass Spectrum Peak Intensity
- GJB 5384.10-2005 Test methods of performance for pyrotechnic composition Part 10: Test for mass luminousity
AASHTO - American Association of State Highway and Transportation Officials, Mass Spectrum Peak Intensity
- T 71-2007 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar