ZH
RU
ES

Precision repeatability test

Precision repeatability test, Total:185 items.

In the international standard classification, Precision repeatability test involves: Welding, brazing and soldering, Quality, Machine tools, Industrial automation systems, Metrology and measurement in general, Construction materials, Measurement of volume, mass, density, viscosity, Ferrous metals, On-board equipment and instruments, Pumps, Measurement of time, velocity, acceleration, angular velocity, Road vehicles in general, Ceramics, Footwear, Iron and steel products, Linear and angular measurements, Mechanical testing, Air quality, Laboratory medicine, Paints and varnishes, Road engineering, Fibre optic communications, Thermodynamics and temperature measurements, Kitchen equipment, Aids for disabled or handicapped persons.

International Organization for Standardization (ISO), Precision repeatability test

ISO 8206:1991 Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
ISO 5725:1986 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
ISO 5725-2:1994/cor 1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method; Technical Corrigendum 1
ISO 230-2:2006 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes (Fourth Edition)
ISO 230-2:2014 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
ISO 230-2:1988 Acceptance code for machine tools; part 2: determination of accuracy and repeatability of positioning of numerically controlled machine tools
ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
ISO 230-2:2014/Amd 1:2016 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes; Amendment 1
ISO 20505:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Precision repeatability test

GB/T 6379-1986 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 20957.5-2007 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of wrk-holding pallets
GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 11792-1989 Precision of test methods--Check the acceptability of test results obtained under repeatability or reproducibility conditions and to determine final test result
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 16913.2-1997 Methods of dust character test--Part 2: Determination of effective density--Pyknometer method

Professional Standard - Machinery, Precision repeatability test

JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability
JB/T 8772.5-1998 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes

Danish Standards Foundation, Precision repeatability test

DS/EN 28 206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/ISO 8206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/ISO 230-2:2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
DS/ISO 5725:1982 Precision of test methods. Determination of repeatability and reproducibility by interlaboratory tests
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DS/ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DS/ENV 1007-2:1993 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 2: Determination of linear density

British Standards Institution (BSI), Precision repeatability test

BS ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 230-2:2007 Test code for machine tools. Determination of accuracy and repeatability of positioning numerically controlled axes
BS ISO 230-2:2014+A1:2016 Test code for machine tools - Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 5725-2:1995 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 10791-4:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of linear and rotary axes
BS ISO 10791-5:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of work-holding pallets
BS EN 28206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
PD ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
PD ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
19/30329300 DC BS ISO 5725-2. Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
BS EN 1007-2:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density
BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler — Pyknometer method

Lithuanian Standards Office , Precision repeatability test

LST EN 28206-2000 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)
LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
LST ISO 5725-2+AC1:2006 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (identical ISO 5725-2:1994 including technical corrigendum ISO 5725:1994/

European Committee for Standardization (CEN), Precision repeatability test

EN 28206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)
PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:1999 Tests for Mechanical and Physical Properties of Aggregates - Part 7: Determination of the Particle Density of Filler - Pyknometer Method

Japanese Industrial Standards Committee (JISC), Precision repeatability test

JIS B 6192:1999 Test code for machine tools -- Determination of accuracy and repeatability of positioning numerically controlled axes
JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
JIS B 6331-4:2006 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
JIS B 6336-4:2000 Test conditions for machining centers -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
JIS B 6336-5:2000 Test conditions for machining centers -- Part 5: Accuracy and repeatability of positioning of work-holding pallets
JIS K 5600-2-4:2014 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 4: Density (Pyknometer method)

Association Francaise de Normalisation, Precision repeatability test

NF ISO 230-2:2014 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique
NF ISO 10791-5:1998 Conditions d'essai pour centres d'usinage - Partie 5 : précision et répétabilité de positionnement des palettes porte-pieces.
NF E60-100-2/A1*NF ISO 230-2/A1:2016 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes - Amendment 1
NF ISO 230-2/A1:2016 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique - Amendement 1
NF E60-100-2*NF ISO 230-2:2014 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes
NF ISO 10791-4:1998 Conditions d'essai pour centres d'usinage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs.
NF ISO 13041-4:2004 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs
NF E60-097:1998 Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF E60-172-5*NF ISO 10791-5:1998 Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.
NF ISO 5725-2:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
NF G62-616*NF EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance.
NF E60-160-4*NF ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres - Part 4 : accuracy and repeatability of positioning of linear and rotary axes
NF C93-903-14:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14 : examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator.
NF P18-650-7*NF EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.

KR-KS, Precision repeatability test

KS A ISO TR 21074-2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 10791-5-2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-4-2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS A ISO TR 21074-2018(2023) Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 230-2-2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 10791-4-2016 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-5-2016 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS B ISO 13041-4-2022 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4-2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Korean Agency for Technology and Standards (KATS), Precision repeatability test

KS A ISO TR 21074:2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 10791-5:2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5-2016(2021) Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-4-2016(2021) Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-4:2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 230-2:2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 5198:2003 Centrifugal, mixed flow and axial pumps-Code for hydraulic performance tests-Precision class
KS I 3210-2006 Testing methods for specific resistivity recoverycharacteristic of water filtered by membranes
KS B ISO 230-2:2014 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS B ISO 230-2:2015 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 230-2:2007 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS B ISO 13041-4:2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS Q ISO 22971-2012(2017) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
KS Q ISO 22971-2012(2022) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
KS P ISO 17190-9-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density

Group Standards of the People's Republic of China, Precision repeatability test

T/CAMER 016-2022 Test of accuracy of positioning and repeatability of linear axes for vertical twin-spindle CNC lathe

VN-TCVN, Precision repeatability test

TCVN 7011-2-2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres.Part 4: Accuracy and repeatability of positioning of linear and rotary axes
TCVN 6910-2-2001 Accuracy (trueness and precision) of measurement methods and results.Part 2: Basic methos for the determination of repeatability and reproducibility of a standard measurement method

ES-UNE, Precision repeatability test

UNE-ISO 230-2:2016 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
UNE-ISO 13041-4:2022 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

YU-JUS, Precision repeatability test

JUS M.G0.101-1991 Acceptance code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled machine tools

American Society for Testing and Materials (ASTM), Precision repeatability test

ASTM C128-07a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM C127-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1481-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM C128-04 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-04a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-97 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-01e1 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-01 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C127-01 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM C127-88(2001) Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D2726-08 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726-09 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726/D2726M-19 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D2726/D2726M-17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
ASTM E2251-11 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM C373-88(2006) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
ASTM C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
ASTM C373-16 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

US-CFR-file, Precision repeatability test

CFR 40-1065.305-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.305:Verifications for accuracy,repeatability, and noise.

Institute of Electrical and Electronics Engineers (IEEE), Precision repeatability test

IEEE 836-2001 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE 836-2009 Recommended practice for precision centrifuge testing of linear accelerometers

Professional Standard - Aerospace, Precision repeatability test

QJ 2755-1995 Test method for compressive properties of porous low-density composites

SE-SIS, Precision repeatability test

SIS SS 01 42 30-1982 Precision of test methods - Determina-tion of repeatability and reproducibility by inter-laboratory tests

RU-GOST R, Precision repeatability test

GOST ISO 13041-4-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 4.t Accuracy and repeatability of positioning of linear and rotary axes
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

Military Standard of the People's Republic of China-General Armament Department, Precision repeatability test

GJB 10014-2021 Accuracy Test Method for Ballistic Missile Inertial Starlight Composite Guidance System

AENOR, Precision repeatability test

UNE 15331-4:2005 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.
UNE 15450-4:2000 Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method

American National Standards Institute （ANSI), Precision repeatability test

ANSI/IEEE 836:2009 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

The American Road & Transportation Builders Association, Precision repeatability test

AASHTO T 85-1991 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 84-2000 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 227-2002 Standard Method of Test for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

CZ-CSN, Precision repeatability test

CSN 01 0251-1988 Precision of test methods Determination of repeatability and repro- ducibility for a standard test mcthod by inter-laboratory tests
CSN IEC 68-2-37:1995 Electrotechnical and electronic products.Basic environmental testing procedures.Part 2-37:Test Fdc:Random vibration wide band-Reproducibility Low
CSN IEC 68-2-35:1995 Electrotechnical and electronic products.Basic environmental testing procedures.Part 2-35:Test Fda:Random vibration wide band-Reproducibility High
CSN IEC 68-2-36:1995 Electrotechnical and electronic products.Basic environmental testing procedures.Part 2-36:Test Fdb:Random vibration wide band-Reproducibility Medium

German Institute for Standardization, Precision repeatability test

DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN ISO 10791-4:2001-01 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
DIN EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010); German version EN ISO 10768:2010

IT-UNI, Precision repeatability test

UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Association of German Mechanical Engineers, Precision repeatability test

VDI/VDE 2617 Blatt 9-2009 Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines
VDI/VDE 2617 Blatt 12.1-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries

BE-NBN, Precision repeatability test

NBN X 03-009-1988 Precision of tests methods - Détermination of repeatabi1ity and reproductibi1ity for a standard test method by inter-laboratory tests

国家药监局, Precision repeatability test

YY/T 1789.6-2023 In vitro diagnostic testing system performance evaluation methods Part 6: Precision, diagnostic sensitivity and specificity of qualitative reagents

PT-IPQ, Precision repeatability test

NP 2827-2.35-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility high
NP 2827-2.36-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility médium

Professional Standard - Aviation, Precision repeatability test

HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
HB 7736.3-2004 Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area

HU-MSZT, Precision repeatability test

MSZ 510-1964

未注明发布机构, Precision repeatability test

DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method