internal verification group

internal verification group, Total:149 items.

In the international standard classification, internal verification group involves: Protection against fire, Environmental protection, Elements of buildings, Fluid storage devices, Quality, Finances. Banking. Monetary systems. Insurance, Information sciences. Publishing, Applications of information technology, Non-destructive testing, Laboratory medicine, Air quality, Vocabularies, Linear and angular measurements, Tyres, Road vehicle systems, Internal combustion engines, Rotating machinery, Fluid power systems, Metrology and measurement in general, Road engineering, Equipment for the chemical industry, Wind turbine systems and other alternative sources of energy, Lighting, Medical sciences and health care facilities in general, Railway rolling stock, Solar energy engineering, Protection of and in buildings, Electrical engineering in general, Shafts and couplings, Components for aerospace construction, Continuous handling equipment.

Association Francaise de Normalisation, internal verification group

NF EN ISO 9241-220:2019 Ergonomics of human-system interaction - Part 220: process of validation, execution and evaluation of human-centered design within organizations
NF ISO 12828-2:2020 Validation method for fire gas analyzes - Part 2: intralaboratory validation of quantification methods
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: intralaboratory validation
XP E01-201-8-2016 Pressure equipment and assemblies - Part 8 : proof test
XP E01-201-8*XP CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8 : proof test
NF EN ISO 23632:2022 Industrial valves - Validation tests on the design of valve devices
NF P97-407*NF EN 40-3-2:2014 Lighting columns - Part 3-2 : design and verification - Verification by testing
XP ISO/TS 27878:2023 Reproducibility of level of detection (LOD) of binary methods for collaborative and internal validation studies
NF E37-306*NF ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 6 : test methods
NF P97-406*NF EN 40-3-3:2014 Lighting columns - Part 3-3 : design and verification - verification by calculation
FD X30-148:2016 Measurement and verification of the energy performance - Determination of energy savings in organizations

Society of Automotive Engineers (SAE), internal verification group

SAE AIR6236A-2022 In-House Verification of EMI Test Equipment
SAE AS5688-1998 Cable Assemblies, Aircraft, Proof Testing and Prestretching of

SAE - SAE International, internal verification group

SAE AIR6236-2015 In-House Verification of EMI Test Equipment
SAE AIR6236A-2016 In-House Verification of EMI Test Equipment
SAE AS5688A-2004 Cable Assemblies; Aircraft@ Proof Testing and Prestretching of

Professional Standard - Commodity Inspection, internal verification group

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report

SCC, internal verification group

DANSK DS/ISO 12828-2:2016 Validation methods for fire gas analyses -- Part 2: Intralaboratory validation of quantification methods
DIN 4103-1 E:2014 Draft Document - Internal non-loadbearing partitions - Part 1: Requirements and verification
DANSK DS/CEN/TS 764-8:2016 Pressure equipment and assemblies – Part 8: Proof test
SN-CEN/TS 764-8:2016 Pressure equipment and assemblies — Part 8: Proof test
DIN EN ISO 16140-4 E:2018 Draft Document - Microbiology of the food chain - Method validation - Part 4: Protocol for single-laboratory (in-house) method validation (ISO/DIS 16140-4:2017); German and English version prEN ISO 16140-4:2017
UNE 149101:2011 Water conditioning equipment inside buildings. Validation of equipment used in the treatment of drinking water in the interior of buildings.
BS PD ISO/TS 37008:2023 Internal investigations of organizations. Guidance
NS-EN 40-3-3:2013 Lighting columns — Part 3-3: Design and verification — Verification by calculation
BS PD ISO/TS 16431:2002 Hydraulic fluid power. Assembled systems. Verification of cleanliness
UNE 20460-6-61:2003 Electrical installations of buildings -- Part 6-61: Verification - Initial verification
NS-EN 40-3-3:2003 Lighting columns — Part 3-3: Design and verification — Verification by calculation
NS-EN 40-3-2:2000 Lighting columns — Part 3-2: Design and verification — Verification by testing
CEI 13-71:2015 Electrical energy measurement systems (AC) - Guide to composition, installation and verification
CEI 48-3:1982 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 1 Group of tests
CEI 48-4:1983 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 2 Group of tests
CEI 48-9:1988 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 4 Group of tests
UNE-EN 40-3-3:2003 Lighting columns - Part 3-3: Design and verification - Verification by calculation
DANSK DS/EN 40-3-3:2013 Lighting columns - Part 3-3: Design and verification - Verification by calculation
BS PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
DANSK DS/ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
CEI 13-4:2005 Electrical energy measurement systems - Composition, precision and verification - SEE SUMMARY

GSO, internal verification group

GSO ISO 12828-2:2021 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
BH GSO ISO 12828-2:2022 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
GSO ISO 999:2013 Information and documentation -- Guidelines for the content, organization and presentation of indexes
GSO IEC 61032:2014 Protection of persons and equipment by enclosures - Probes for verification
OS GSO ISO 14:2015 Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification
BH GSO ISO 14:2016 Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification
GSO ISO 14:2015 Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification
GSO ISO/TR 8865:2013 Mining -- Guidance on methods of verifying dimensions of sprocket assemblies for chain conveyors

Korean Agency for Technology and Standards (KATS), internal verification group

KS I ISO 14066-2016(2021) Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams
KS I ISO 16431-2020 Hydraulic fluid power－Assembled systems－Verification of cleanliness
KS C IEC 60364-6-61-2005(2010) Electrical installations of buildings－Part 6－61：Verification－Initial verification
KS P 1011-2008 Test method of the 2-D electrophoresis for recombinant bacteria

GM North America, internal verification group

GM GM9123P-1999 Validation Tests for Interior Mounted Unexposed Modules

IN-BIS, internal verification group

IS 10000 Pt.12-1980 Internal Combustion Engine Test Methods Part XII Specimen Test Certificate

German Institute for Standardization, internal verification group

DIN 4103-1:2015 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN 4103-1:2015-06 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN CEN/TS 764-8:2016-11*DIN SPEC 2930:2016-11 Pressure equipment and assemblies - Part 8: Proof test; German version CEN/TS 764-8:2016
DIN 863-4:1999-04 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN 863-4:1999 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN EN 40-3-3:2013-06 Lighting columns - Part 3-3: Design and verification - Verification by calculation; German version EN 40-3-3:2013
DIN 6280-10:1986 Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
DIN 28055-2:2002 Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 2: Proof of suitability and testing
DIN 4109-31:2016 Sound insulation in buildings - Part 31: Data for verification of sound insulation (component catalogue) - Framework document
DIN 4109-36:2016-07 Sound insulation in buildings - Part 36: Data for verification of sound insulation (component catalogue) - Technical equipment / Note: Applies in conjunction with DIN 4109-31 (2016-07).
DIN 4109-32:2016-07 Sound insulation in buildings - Part 32: Data for verification of sound insulation (component catalogue) - Solid construction / Note: Applies in conjunction with DIN 4109-31 (2016-07).
DIN 4109-31:2016-07 Sound insulation in buildings - Part 31: Data for verification of sound insulation (component catalogue) - Framework document
DIN 4109-32:2016 Sound insulation in buildings - Part 32: Data for verification of sound insulation (component catalogue) - Solid construction

未注明发布机构, internal verification group

DIN 4103-1 E:2012-05 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN 4103-1 E:2014-03 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN CEN/TS 764-8:2016*DIN SPEC 2930:2016 Pressure equipment and assemblies - Part 8: Proof test
DIN 863-4:1981 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 40-3-2:2002 Lighting columns - Part 3-2: Design and verification - Verification by testing
ISO 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
NB/T 31053-2014 Wind turbine low voltage ride through modeling and verification method
DIN EN 12668-3 E:2013-04 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 40-3-2 E:2012-06 Lighting columns - Part 3-2: Design and verification - Verification by testing
DIN 4109-31 E:2013-11 Sound insulation in buildings - Part 31: Data for verification of sound insulation (component catalogue) - Framework document
DIN 4109-32 E:2013-11 Sound insulation in buildings - Part 32: Data for verification of sound insulation (component catalogue) - Solid construction

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., internal verification group

ASHRAE PH-97-3-3-1997 GAX Component Simulation and Validation
ASHRAE RP-1133-2001 How to Verify@ Validate@ and Report Indoor Environment Modeling CFD Analyses
ASHRAE 4022-1997 Experimental Validation of a Numerical Model for an Internal Melt Ice-On-Coil Thermal Storage Tank
ASHRAE 4218-1998 Development and Validation of a Room Air-Conditioning Simulation Model
ASHRAE 4689-2004 Thermodynamic Modeling and Experimental Validation of Screw Liquid Chillers
ASHRAE CI-01-5-2-2001 Three-Dimensional Conjugate CFD Simulations of Internal Window Frame Cavities Validated Using IR Thermography

British Standards Institution (BSI), internal verification group

BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
PD ISO/TS 37008:2023 Internal investigations of organizations. Guidance
BS EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Combined equipment
PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies

European Committee for Standardization (CEN), internal verification group

CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8: Proof test
EN 40-3-2:2013 Lighting columns - Part 3-2: Design and verification - Verification by testing
EN 40-3-3:2013 Lighting columns - Part 3-3: Design and verification - Verification by calculation

YU-JUS, internal verification group

JUS M.C1.410-1991 traight-sided splines for cylindrical shafts with interna! centering. Dimensions, tolerances and verifica-tion

Taiwan Provincial Standard of the People's Republic of China, internal verification group

CNS 13286-1993 An Approach to the Review by a Certification Body of its Own Internal Quality System

WRC - Welding Research Council, internal verification group

BULLETIN 38-1957 PROOF-TESTING PRESSURE VESSELS DESIGNED FOR INTERNAL PRESSURE

American Welding Society (AWS), internal verification group

WRC 038:1957 Proof-Testing Pressure Vessels Designed for Internal Pressure

International Organization for Standardization (ISO), internal verification group

ISO 11521:1996 Securities - Scheme for interdepository message types
ISO/TS 37008:2023 Internal investigations of organizations — Guidance
ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods
ISO 8528-6:1993 Reciprocating internal combustion engine driven alternating current generating sets; part 6: test methods

GB-REG, internal verification group

REG NASA-LLIS-1551-2005 Lessons Learned ?In-House vs. Out-of-House Staffing Mix
REG NASA-LLIS-1570--2005 Lessons Learned ?In-House vs. Out-of-House Staffing Mix
REG NASA-LLIS-3763-2011 Lessons Learned - Certifying Calibration on Test Components

中国人民银行, internal verification group

JR/T 0248-2022 Internal interface of securities and futures industry institutions for securities trading

Canadian Standards Association (CSA), internal verification group

CSA W178.1-08-2008 Certification of Welding Inspection Organizations Fifth Edition
CSA W178.1-02-2002 Certification of Welding Inspection Organizations Fourth Edition

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, internal verification group

GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions

SE-SIS, internal verification group

SIS SS-ISO 14:1987 Straight-sided splines for cylindrical shafts with internal centering - Dimen- sons, tolerances and verification
SIS SS 81 73 25-1988 Light internal wood doorsets - Sizes
SIS SS 81 73 25-1981 Light internal wood doorsets - Sizes
SIS SS 81 73 12-1983 Internal wood doorsets — Swing doors — Sizes
SIS SS 81 73 12-1988 Internal wood doorsets — Swing doors — Sizes

Underwriters Laboratories (UL), internal verification group

UL ECVP 2809-2-2023 Environmental Claim Validation Procedure (ECVP) for Recycled Content
UL 9798-2018 Environmental Claim Validation Procedure (ECVP) for Biobased Content

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, internal verification group

GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

AENOR, internal verification group

UNE 149101:2015 Water conditioning equipment inside buildings. Validation of equipment used in the treatment of drinking water in the interior of buildings.
UNE-EN 40-3-3:2013 Lighting columns - Part 3-3: Design and verification - Verification by calculation
UNE-EN 40-3-2:2013 Lighting columns - Part 3-2: Design and verification - Verification by testing

GOST, internal verification group

GOST 34926-2023 Railway rolling stock and railway transport infrastructure facilities. Requirements for the composition, content, design, development, certification, verification and validation of the test method

Standard Association of Australia （SAA）, internal verification group

AS 2805.4.1:2001 Electronic funds transfer - Requirements for interfaces - Message authentication - Mechanisms using a block cipher

RU-GOST R, internal verification group

GOST 24297-2013 Verification of purchased product. Organization and methods of control
GOST R ISO 14066-2013 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification team

Professional Standard - Energy, internal verification group

NB/T 31053-2021 Verification procedures for electrical simulation models of wind turbines

Lithuanian Standards Office , internal verification group

LST EN 12668-3-2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN 40-3-3-2013 Lighting columns - Part 3-3: Design and verification - Verification by calculation
LST EN 40-3-3-2003 Lighting columns - Part 3-3: Design and verification - Verification by calculation
LST EN 40-3-2-2002 Lighting columns - Part 3-2: Design and verification - Verification by testing

Professional Standard - Hygiene , internal verification group

WS/T 407-2012 Guideline for comparability verification of quantitative results within one health care system

KR-KS, internal verification group

KS M ISO 14960-1-2016 Tubeless tyres ─ Valves and components ─ Part 1: Test methods

TH-TISI, internal verification group

TIS 2289-2006 Filament lamps for use in approved lamp units on power.driven vehicles and of their trailers

Defense Logistics Agency, internal verification group

DLA MIL-DTL-5688 E (2)-2011 WIRE ROPE ASSEMBLIES; AIRCRAFT, PROOF TESTING AND PRESTRETCHING OF

国家能源局, internal verification group

NB/T 10587-2021 Technical regulations for verification of power curve of wind farm units

国家铁路局, internal verification group

TB/T 3500-2018 EMU car body crashworthiness requirements and verification specifications
TB/T 3454.2-2016 EMU Doors Part 2: Interior Doors

International Federation of Trucks and Engines, internal verification group

NAVISTAR TMS 9544-2013 Flammability Certification of Interior Trim Materials And Components

Professional Standard - Machinery, internal verification group

JB/T 6228-2014 Checking methods and evaluation of water circuit within the winding of turbo generator
JB/T 6228-2005 Checking methods and evaluation of water circuit within the winding of turbo generator
JB/T 6228-1992 Inspection method and evaluation of internal water system of steam turbine generator winding

GM Europe, internal verification group

GME GMI 06604 V-1998 Spark Plug; Verification Part (English/German; Includes Appendix 1 & 2; ITDC Release; Draft for Harmonization)

Institute of Electrical and Electronics Engineers (IEEE), internal verification group

IEEE Std 1012a-1998 IEEE Standard for Software Verification and Validation - Content Map to IEEE 12207.1

Group Standards of the People's Republic of China, internal verification group

T/CEEMA 002-2020 Technical specification for wind turbine power curve verification

未注明发布机构, internal verification group

DIN 4103-1 E:2012-05 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN 4103-1 E:2014-03 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN CEN/TS 764-8:2016*DIN SPEC 2930:2016 Pressure equipment and assemblies - Part 8: Proof test
DIN 863-4:1981 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 40-3-2:2002 Lighting columns - Part 3-2: Design and verification - Verification by testing
ISO 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
NB/T 31053-2014 Wind turbine low voltage ride through modeling and verification method
DIN EN 12668-3 E:2013-04 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 40-3-2 E:2012-06 Lighting columns - Part 3-2: Design and verification - Verification by testing
DIN 4109-31 E:2013-11 Sound insulation in buildings - Part 31: Data for verification of sound insulation (component catalogue) - Framework document
DIN 4109-32 E:2013-11 Sound insulation in buildings - Part 32: Data for verification of sound insulation (component catalogue) - Solid construction

Danish Standards Foundation, internal verification group

DS/EN 40-3-3:2013 Lighting columns - Part 3-3: Design and verification - Verification by calculation
DS/EN 40-3-2:2013 Lighting columns - Part 3-2: Design and verification - Verification by testing

Zhejiang Provincial Standard of the People's Republic of China, internal verification group

DB3305/T 131-2019 Internal governance norms of social organizations

Guangdong Provincial Standard of the People's Republic of China, internal verification group

DB4401/T 240-2023 Internal governance standards for social organizations

International Electrotechnical Commission (IEC), internal verification group

IEC 61215-2:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
IEC 61215-1:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements

国家市场监督管理总局、中国国家标准化管理委员会, internal verification group

GB/T 38314-2019 Lithium ion battery design and verification requirements for space application