ZH
RU
ES

Standard sample of specific surface meter

Standard sample of specific surface meter, Total:334 items.

In the international standard classification, Standard sample of specific surface meter involves: Linear and angular measurements, Testing of metals, Metalliferous minerals, Data storage devices, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Nuclear energy engineering, Surface treatment and coating, Paints and varnishes, Coals, Road engineering, Radiation protection, Soil quality. Pedology, Insulating materials, Applications of information technology, Powder metallurgy, Protection against dangerous goods, Air quality, Mechanical testing, Petroleum, petroleum products and natural gas handling equipment, Ceramics, Coatings and related processes used in aerospace industry, Space systems and operations, Paint ingredients, Protection against fire, Radiation measurements, Road vehicles in general, Vocabularies, Non-textile floor coverings, Environmental protection, Test conditions and procedures in general, Rubber, Elements of buildings, Interior finishing, Paper and board, Construction materials, Adhesives, Semi-manufactures of timber, Occupational safety. Industrial hygiene, Medical equipment.

Standard Association of Australia （SAA）, Standard sample of specific surface meter

AS 2382:1981 Surface roughness comparison specimens
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water

IN-BIS, Standard sample of specific surface meter

IS 5534-1969

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Standard sample of specific surface meter

SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator

RU-GOST R, Standard sample of specific surface meter

GOST 9378-1975 Surface roughness comparison specimens. Technical requirements

Korean Agency for Technology and Standards (KATS), Standard sample of specific surface meter

KS B 0507-1975(2011) Roughness Comparison Specimens
KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS F 2446-2000 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS F 2446-1980 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS M ISO 8503-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surf
KS B 5544-2003(2018)
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS M ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS M ISO 8503-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile o
KS D ISO 17973-2011(2021) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 17973-2011(2016) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS A ISO 3274:2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard sample of specific surface meter

GB/T 13288-1991 The assessment of profile grades of steel surface before application of paint and related products.Comparator
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales
GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
GB/T 30701-2014 Surface chemical analysis.Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
GB/T 6062-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Nominal characteristic of contact(stylus) instruments
GB/T 6062-2002 Geometrical product specifications (GPS)--Surface texture:Profile method--Nominal characteristics of contact(stylus)instruments

AASHTO - American Association of State Highway and Transportation Officials, Standard sample of specific surface meter

T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)
T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

British Standards Institution (BSI), Standard sample of specific surface meter

BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS ISO 7503-3:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination. Apparatus calibration
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal. Nominal characteristics of non-contact (focus variation) instruments
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments
BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
BS ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis

ES-AENOR, Standard sample of specific surface meter

Professional Standard - Chemical Industry, Standard sample of specific surface meter

HG/T 2347.8-1992 Determination of specific surface area of γ·Fe(index 2)O(index 3)magnetic powder

American Society for Testing and Materials (ASTM), Standard sample of specific surface meter

ASTM D2320-98(2003) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E1792-20 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E1829-14 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM E1829-02 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM E1829-97 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM E1829-09 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM D7013/D7013M-15 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM D3964-04 Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D6610-00 Standard Practice for Manual Sampling Coal from Surfaces of a Stockpile
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM E1792-03(2016) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D7707-21 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM E1078-14 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM D7707-11(2016) Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM C998-05(2010)e1 Standard Practice for Sampling Surface Soil for Radionuclides
ASTM A717/A717M-95 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM C998-05 Standard Practice for Sampling Surface Soil for Radionuclides
ASTM A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM A717/A717M-12(2018) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM A717/A717M-12(2022) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM D3964-10(2015) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D5503-94(2003) Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM E3149-18 Standard Guide for Facial Image Comparison Feature List for Morphological Analysis
ASTM B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM E1078-97 Standard Guide for Procedures for Specimen Preparation and Mounting in Surface Analysis
ASTM E1078-02 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM E1078-09 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM B825-19 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM D7390-07 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D7390-07(2012) Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM D7127-17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM D5503-94(1999) Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM D5503-94(2008) Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM E740-88(1995)e1 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM D5767-95(1999) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D5767-95(2012) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-95 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D7000-19 Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
ASTM D7000-19a Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E1216-99 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM D7000-04 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
ASTM E1216-99(2005) Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E740-03 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E740/E740M-03(2010)e1 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E740/E740M-03(2016) Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E740/E740M-03(2010)e2 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM D7000-11(2017) Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
ASTM E1216-11(2016) Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E1216-06 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D7000-11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
ASTM E2955-13(2019) Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM B825-97 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM D765-87(1999) Standard Specification for Raw and Burnt Sienna Pigments
ASTM D1149-78a Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D7659-21 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM D5767-95(2004) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D1735-14 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D7390-18 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM D7390-18e1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM E2458-06 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
ASTM B825-02 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM B825-13 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM D7659-10(2015) Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM E2688-18 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM D7330-22 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D6661-01(2006) Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D6661-01 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D7659-10 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM D6661-17 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E2579-21 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E2579-23 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-23a Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-15 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-20 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-19 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D1171-16e1 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM D1171-18 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D5767-17 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM E2319-04(2019) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E2404-05 Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics
ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E2319-22 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E2579-07 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2404-06 Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-12 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM D585-97(2007) Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
ASTM D5859-96e1 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
ASTM D7144-05a(2011) Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E2458-17 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
ASTM E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
ASTM D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D7144-05a Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D7144-05 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM E2579-11 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2688-16 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E2573-17 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2573-19 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2690-22 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM C1057-92(1998)e1 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
ASTM C1057-17 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM C1057-22 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM F3276-19 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
ASTM F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
ASTM D7144-21 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
ASTM D7144-05a(2016) Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM E2573-07a Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2573-07 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2231-02 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E2231-02e1 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E2690-10 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E2231-14 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

AWS - American Welding Society, Standard sample of specific surface meter

C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces

German Institute for Standardization, Standard sample of specific surface meter

DIN 43700:1982 Measurement and control; measurement and control instruments for panel mounting; nominal front- and cut-out-dimensions
DIN 40686 Bb.1:1983 Surfaces of dense ceramic components for electrical engineering; indications in drawings
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN 13312-3:2001-07 Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; German version EN 13312-3:2001
DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
DIN EN ISO 8503-2:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator pro...
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN ISO 8503-1:2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN ISO 25178-605:2014-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN EN ISO 3274:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997

The American Road & Transportation Builders Association, Standard sample of specific surface meter

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Twentieth Edition R(1998)

International Organization for Standardization (ISO), Standard sample of specific surface meter

ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 7503-3:2016 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration
ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
ISO/CD 25178-602 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO/CD 25178-601 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO/CD 25178-605 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasi
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments

Institute of Electrical and Electronics Engineers (IEEE), Standard sample of specific surface meter

IEEE/ASA C39.1-1959 ASA American Standard Requirements for Electrical Indicating Instruments Panel, Switchboard, and Portable Instruments

International Electrotechnical Commission (IEC), Standard sample of specific surface meter

IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters

Association Francaise de Normalisation, Standard sample of specific surface meter

NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF EN ISO 25178-601:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 601 : caractéristiques nominales des instruments à contact (à palpeur)
NF EN ISO 25178-701:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 701 : étalonnage et étalons de mesure pour les instruments à contact (à palpeur)
NF EN ISO 25178-606:2015 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 606 : caractéristiques nominales des instruments sans contact (à variation focale)
NF X42-127*NF EN 13312-3:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 3 : sampling and inoculation devices
NF EN ISO 25178-607:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 607 : caractéristiques nominales des instruments sans contact (microscopie confocale)
NF T35-503-3*NF EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-3:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
NF EN ISO 25178-603:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 603 : caractéristiques nominales des instruments sans contact (microscopes interférométriques à glissement de franges)
NF EN ISO 25178-602:2010 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 602 : caractéristiques nominales des instruments sans contact (à capteur confocal chromatique)
NF E05-031-601*NF EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments
NF T35-503-1:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abras
NF E05-031-606*NF EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture : areal - Part 606 : nominal characteristics of non-contact (focus variation) instruments
NF EN ISO 25178-604:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : caractéristiques nominales des instruments sans contact (à interférométrie par balayage à cohérence)
NF E05-031-605*NF EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments
NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire
NF T35-503-1*NF EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abr
NF E05-031-602*NF EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments
NF E05-031-604*NF EN ISO 25178-604:2013 Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments
NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.

未注明发布机构, Standard sample of specific surface meter

DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
BS EN ISO 3274:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Nominal characteristics of contact (stylus) instruments —

中华人民共和国国家卫生和计划生育委员会, Standard sample of specific surface meter

GB/T 11713-1989 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers

European Committee for Standardization (CEN), Standard sample of specific surface meter

EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
EN ISO 8503-3:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of S
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
EN ISO 3274:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments

SE-SIS, Standard sample of specific surface meter

SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for
SIS SS-ISO 8503-3:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators
SIS SS-ISO 8503-2:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 1: Specifications and definitions for ISO sur- face profile comparators for

KR-KS, Standard sample of specific surface meter

KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS A ISO 3274-2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments

Danish Standards Foundation, Standard sample of specific surface meter

DS/EN ISO 3274/Corr. 1:2007 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/ISO 8423/Cor.1:1993 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) -Technical Corrigendum 1
DS/EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
DS/EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Standard sample of specific surface meter

GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales

Lithuanian Standards Office , Standard sample of specific surface meter

LST EN ISO 3274:2001 Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
LST EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)

API - American Petroleum Institute, Standard sample of specific surface meter

API MPMS 13.2-1994 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 2 - Methods of Evaluating Meter Proving Data (FIRST EDITION; ERTA: October 2015)

AENOR, Standard sample of specific surface meter

UNE-EN ISO 3274:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)

Japanese Industrial Standards Committee (JISC), Standard sample of specific surface meter

JIS B 0651 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)
JIS B 0651:2001 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis

BE-NBN, Standard sample of specific surface meter

NBN-ISO 7361:1992 Performance standards in building - Presentation of performance levels of facades made of same-source components

ES-UNE, Standard sample of specific surface meter

UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)

American National Standards Institute （ANSI), Standard sample of specific surface meter

ANSI/ASTM E2579:2020 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ANSI/ASTM E2579:2021 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

CEN - European Committee for Standardization, Standard sample of specific surface meter

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss