ZH
RU
ES

voc initial concentration

voc initial concentration, Total:116 items.

In the international standard classification, voc initial concentration involves: Structures of buildings, Products of the textile industry, Pipeline components and pipelines, Road engineering, Materials for aerospace construction, Paper and board, Rubber and plastics products, Metalliferous minerals, Rotating machinery, Aerospace fluid systems and components, Petroleum products in general, Protection against dangerous goods, Continuous handling equipment, Air quality, Lubricants, industrial oils and related products, Wastes, Paints and varnishes, Wood, sawlogs and sawn timber, Reinforced plastics, Transport.

International Truck and Engine Corporation (ITEC), voc initial concentration

INTERN CEMS GT-6B-2009 Initial Gloss of Paint

International Federation of Trucks and Engines, voc initial concentration

NAVISTAR CEMS GT-6B-2015 VOID - Initial Gloss of Paint

RU-GOST R, voc initial concentration

GOST R 57289-2016 Masonry. Method of determination of initial shear strength
GOST R 57291-2016 Masonry. Method of determination of initial shear strength
GOST 26517-1985 Irom ores, agglomerates and pellets. Method for determination of initial softening point and temperature range of softening

WRC - Welding Research Council, voc initial concentration

BULLETIN 443-1999 EXTERNAL PRESSURE: EFFECT OF INITIAL IMPERFECTIONS AND TEMPERATURE LIMITS

American Welding Society (AWS), voc initial concentration

WRC 443:1999 External Pressure: Effect Of Initial Imperfections And Temperature Limits

CU-NC, voc initial concentration

NC 74-22-1985 Cattle-Raising. Animal Feeding Determination ot Initial Humidity and Dry Material

Association Francaise de Normalisation, voc initial concentration

NF P12-703*NF EN 1052-3:2003 Methods of test for masonry - Part 3 : determination of initial shear strength
NF G07-148:1981 Textiles. Tests for fabrics. Determination of tear strength under live froce. Initiated tear.
NF G07-146:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH ON DYNAMOMETER. INITIATED TEAR.
NF EN 1052-3/A1:2007 Méthodes d'essai de la maçonnerie - Partie 3 : détermination de la résistance initiale au cisaillement
NF EN 1052-3:2003 Méthodes d'essai de la maçonnerie - Partie 3 : détermination de la résistance initiale au cisaillement
NF P12-703/A1*NF EN 1052-3/A1:2007 Methods of test for masonry - Part 3 : determination of initial shear strength
NF G07-149:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH UNDER LIVE FORCE. INITIATED TEAR. (LOW CAPACITY DROP HAMMER).
NF EN 1228:1996 Systèmes de canalisations en plastique - Tubes en plastique thermodurcissable renforcé de verre (PRV) - Détermination de la rigidité annulaire spécifique initiale.
NF T57-220*NF EN 1228:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.
XP X30-403-1999 Waste - Silicate glass - Test for determination of the initial dissolution velocity on contact with a regularly renewed aqueous solution, regenerated within a closed circuit by evaporation and condensation.
NF T57-223*NF EN 1394:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.
NF EN 1394:1996 Systèmes de canalisations en plastique - Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination de la résistance en traction circonférentielle initiale apparente
NF T34-558-1*NF ISO 12013-1:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1 : start temperature of the curring reaction
NF P21-500-2:2006 Timber structures - Strength graded structural timber with rectangular cross section - Part 2 : machine grading - Additional requirements for initial type testing.
NF P21-500-2:2013 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: machine grading - additional requirements for initial type testing

International Organization for Standardization (ISO), voc initial concentration

ISO 7685:2019 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
ISO 14085-6:2015 Aerospace series - Hydraulic filter elements - Test methods - Part 6: Initial cleanliness level
ISO 8521:2020 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
ISO 20264:2019 Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes - Determination of initial specific ring stiffness using segment test species cut from a pipe
ISO/PRF 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO/DIS 8513 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 12013-1:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1: Start temperature of the curing reaction

CZ-CSN, voc initial concentration

CSN 50 0297-1983 Groundwood testing. Determlmation of tne initial wet strength of groundwood

Danish Standards Foundation, voc initial concentration

DS/EN 1052-3/A1:2007 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 1228:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
DS/EN 1394/AC:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
DS/EN 1394:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
DS/EN 14081-2+A1:2013 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing

Lithuanian Standards Office , voc initial concentration

LST EN 1052-3-2003 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1052-3-2003/A1-2007 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1228-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
LST EN 1394+AC-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
LST EN 14081-2-2010+A1-2013 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing

AENOR, voc initial concentration

UNE-EN 1052-3:2003/A1:2008 Methods of test for masonry - Part 3: Determination of initial shear strength
UNE-EN 1052-3:2003 Methods of test for masonry - Part 3: Determination of initial shear strength.
UNE-EN 1228:1996 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
UNE-EN 1394:1997 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
UNE-EN 14081-2:2010+A1:2013 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing

未注明发布机构, voc initial concentration

BS EN 1052-3:2002(2007) Methods of test for masonry — Part 3 : Determination of initial shear strength
DIN EN 1226:1996 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection

German Institute for Standardization, voc initial concentration

DIN EN 1052-3:2007-06 Methods of test for masonry - Part 3: Determination of initial shear strength; German version EN 1052-3:2002 + A1:2007
DIN 54514:2008 Testing of paper and board - Determination of the initial wet web strength by tensile test
DIN EN 1052-3:2007 Methods of test for masonry - Part 3: Determination of initial shear strength(includes Amendment A1:2007); English version of DIN EN 1052-3:2007-06
DIN 54514:2008-08 Testing of paper and board - Determination of the initial wet web strength by tensile test
DIN EN 1228:1996-08 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN EN 1394:1996-12 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996

Professional Standard - Aerospace, voc initial concentration

QJ 1468-1988 Test method for initial thermal decomposition temperature and deflagration temperature of composite solid propellant

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, voc initial concentration

GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
GB/T 22052-2008 Test method for vapor pressure-temperature relationship and initial decompostition temperature of liquids by isoteniscope

British Standards Institution (BSI), voc initial concentration

BS ISO 7685:2019 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
BS EN 2781:1998 Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
20/30404854 DC BS ISO 10466. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
BS EN 1228:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
BS ISO 20264:2019 Stationary source emissions. Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
BS ISO 12013-1:2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Start temperature of the curing reaction
BS EN 1226:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
BS EN 14081-2:2010+A1:2012 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
BS EN 14081-2:2006 Timber structures - Strength graded structural timber with rectangular cross section - Machine grading - Additional requirements for initial type testing
BS EN 14081-2:2018+A1:2022 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
BS EN 1394:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength
19/30389925 DC BS ISO 8521. Glass-reinforced thermosetting plastic (GRP) pipes. Test methods for the determination of the initial circumferential tensile wall strength
BS ISO 8513:2014 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
BS ISO 8513:2023 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
BS EN 14081-2:2010 Timber structures - Strength graded structural timber with rectangular cross section - Machine grading;additional requirements for initial type testing
PD ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes. Determination of initial specific ring stiffness using segment test species cut from a pipe
BS ISO 8513:2016 Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength

IETF - Internet Engineering Task Force, voc initial concentration

RFC 8070-2017 Public Key Cryptography for Initial Authentication in Kerberos (PKINIT) Freshness Extension

American Society for Testing and Materials (ASTM), voc initial concentration

ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E2341/E2341M-05(2019) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM E2341/E2341M-05 Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

European Committee for Standardization (CEN), voc initial concentration

EN 2781:1998 Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
EN ISO 7623:2015 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2015)
EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 14081-2:2010 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing (Incorporates Amendment A1: 2012)

ESDU - Engineering Sciences Data Unit, voc initial concentration

ESDU 68048-1968 Straight pipes under internal pressure. Effect of initial non-circularity on maximum stress.
ESDU 87036 B-1996 Elastic stresses and deflections for square plates with small initial curvature under uniform pressure on the concave or convex face.
ESDU 69019-1969 Elastic stresses and deflections for long rectangular plates with small initial curvature under uniformly distributed normal pressure on the concave face.

Group Standards of the People's Republic of China, voc initial concentration

T/SHMHZQ 068-2022 Calibration method for initial resolver angle of permanent magnet synchronous drive motor for electric vehicles

National Aeronautics and Space Administration (NASA), voc initial concentration

NASA-TM-X-72843-1976 Effects of thickness on the aerodynamic characteristics of an initial low-speed family of airfoils for general aviation applications

Korean Agency for Technology and Standards (KATS), voc initial concentration

KS M ISO 8521:2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS M ISO 7685:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Determination of initial specific ring stiffness
KS M ISO 8513-2017(2022) Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8521:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength

KR-KS, voc initial concentration

KS M ISO 8521-2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS M ISO 7685-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Determination of initial specific ring stiffness
KS M ISO 8513-2017 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8521-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength

(U.S.) Ford Automotive Standards, voc initial concentration

FORD WSD-M2C904-B-2009 OIL - ENGINE, SAE 10W-30 API SG/CD, CONTROLLED VISCOSITY, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M64J28-A1-2012 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, 180 °C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M64J35-C1-1993 PRIMER, WATERBORNE CATHODIC ELECTROCOAT, 25 MICROMETRE FILM BUILD, GRAY, LEAD FREE, 175 C BAKING TEMPERATURE, INITIAL FILL (Shown on WSK-M64J35-A1)
FORD WSB-M64J28-A1-2010 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, 180 DEGREES C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M64J35-A1-2012 PRIMER, WATERBORNE CATHODIC ELECTROCOAT, 25 MICROMETRE FILM BUILD, BLACK, LEAD FREE, 175 C BAKING TEMPERATURE, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***

ES-UNE, voc initial concentration

UNE-EN 1394/AC:1998 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.

Japanese Industrial Standards Committee (JISC), voc initial concentration

JIS K 7037:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
JIS K 7038:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection

Standard Association of Australia （SAA）, voc initial concentration

AS/NZS 3572.24:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial hoop tensile strength by means of a tensile plate test
AS/NZS 3572.23:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test

CEN - European Committee for Standardization, voc initial concentration

EN 14081-2:2005 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing

PL-PKN, voc initial concentration

PN C04570-09-1987 Water and wa"te water Tests for metals by atomie absorption spectrometry Determination of Cr(VI) and Cr(III)