ZH
RU
ES

Liquid Sample Elemental Analysis

Liquid Sample Elemental Analysis, Total:205 items.

In the international standard classification, Liquid Sample Elemental Analysis involves: Ceramics, Coals, Analytical chemistry, Geology. Meteorology. Hydrology, Soil quality. Pedology, Fuels, Wastes, Insulating fluids, Animal feeding stuffs, Lubricants, industrial oils and related products, Air quality, Fluid power systems, Ferrous metals, Construction materials, Industrial furnaces, Metalliferous minerals, Petroleum products in general, Inorganic chemicals, Semiconducting materials, Laboratory medicine, Spices and condiments. Food additives, Testing of metals, Protection against fire, Non-ferrous metals, Measurement of fluid flow, General methods of tests and analysis for food products, Water quality, Photography, Non-metalliferous minerals, Integrated circuits. Microelectronics, Components for aerospace construction, AGRICULTURE, Crude petroleum, Surface treatment and coating, Nuclear energy engineering, Products of the chemical industry.

国家市场监督管理总局、中国国家标准化管理委员会, Liquid Sample Elemental Analysis

GB/T 38904-2020 Methods for elemental analysis of ceramic liquid pigments
GB/T 39527-2020 Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis
GB/T 20975.25-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method

RU-GOST R, Liquid Sample Elemental Analysis

GOST R 53355-2009 Solid mineral fuels. Ultimate analysis

GOSTR, Liquid Sample Elemental Analysis

GOST R 53355-2018 Solid mineral fuel. Ultimate analysis

YU-JUS, Liquid Sample Elemental Analysis

JUS H.F8.102-1987 Gas analysis. Sampling the liguedgases

CZ-CSN, Liquid Sample Elemental Analysis

CSN ISO 6712:1993 Gas analysis. Sampling and transfer equipment for gases supplying an analytical unit

BE-NBN, Liquid Sample Elemental Analysis

NBN T 97-001-1984 Gas analysis- Sampling and transfer equipment for gases supplying an analytical unit

International Organization for Standardization (ISO), Liquid Sample Elemental Analysis

ISO 6142:2001/Amd 1:2009 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method; Amendment 1: Liquid introduction
ISO 4021:1977 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
ISO/TS 18409:2018 Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
ISO 15366-1:2014 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1: Samples containing plutonium in the microgram range

American Society for Testing and Materials (ASTM), Liquid Sample Elemental Analysis

ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D7455-14 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D1914-95(1999) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres
ASTM D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D1914-95(2022) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D1914-95(2014) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D6052-97(2016) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM E947-83(2002) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E947-83(2015) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D7455-08 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D5513-99 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-99(2004) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM E947-22 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D8236-18 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Ana
ASTM E2144-01 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E2144-01(2007) Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E947-83(1996)e1 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM E3245-20 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
ASTM E3245-20e1 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
ASTM D7442-08 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D7442-22 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D7670-10(2017) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D7343-07 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D8469-22 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D846-84 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM E2144-11 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM D7442-08a Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D7343-12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM E2144-21 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E2144-11(2016) Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM F311-97 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM F311-08(2020) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D7691-23 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7691-11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM F3139-15(2023) Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7442-16 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM F3139-15 Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry

German Institute for Standardization, Liquid Sample Elemental Analysis

DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN EN 17053:2018-03 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method); German version EN 17053:2018
DIN EN 17053:2018 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
DIN 50451-6:2014-11 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 6: Determination of 36 elements in a high-purity ammonium fluoride solution (NH<(Index)4>F) and in etching mixtures of high-purity ammonium ...
DIN 51733:2016 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51733:2008 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 50451-7:2018-04 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 7: Determination of 31 elements in high-purity hydrochloric acid by ICP-MS
DIN 50451-3:2014-11 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Determination of 31 elements in high-purity nitric acid by ICP-MS
DIN 51456:2013-10 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN 50451-5:2010 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 5: Guideline for the selection of materials and testing of their suitability for apparatus for sampling and sample preparation for the determination of t
DIN 50451-4:2007-02 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 4: Determination of 34 elements in ultra pure water by mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
DIN 50451-6:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 6: Determination of 36 elements in a high-purity ammonium fluoride solution (NH4F) and in etching mixtures of high-purity ammonium fluoride solution
DIN 50451-3:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Determination of 31 elements in high-purity nitric acid by ICP-MS
DIN 51456:2013 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN ISO 15366-1:2016-07 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1: Samples containing plutonium in the microgram ra...
DIN EN 17547:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography; German and English version prEN 17547:2020
DIN 54387-1:2016 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 1: General information and sample preparation
DIN EN ISO 15366-2:2016-07 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 2: Samples containing plutonium and uranium in the ...
DIN 54387-1:2016-10 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 1: General information and sample preparation

AT-ON, Liquid Sample Elemental Analysis

ONORM L 1094-3-2001 Chemical analyses of soils - Extraction of trace elements with a solution of lithium chloride
ONORM M 6279-1991 Water analysis — Determination oj 33 elements by inductively coupled plasma emission spectrometry (ICP-AES)

RO-ASRO, Liquid Sample Elemental Analysis

STAS 10274/2-1983 Solid fuck ASH ANALYSIS Quantitative spectral analysis of minor, rare and dispersed elements
STAS 7947/12-1988 CALCINATED ALUMINIUM OXIDE Sample disintegration methods and preparation of solution for analysis

Professional Standard - Chemical Industry, Liquid Sample Elemental Analysis

HG/T 5018-2016 Determination methods of the major components and trace metal elements in waste etching liquor containing copper

Group Standards of the People's Republic of China, Liquid Sample Elemental Analysis

T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/NAIA 0135-2022 Determination of carbon, hydrogen and nitrogen in coal-based Fischer-Tropsch synthetic liquid fuel oil and chemicals Elemental analyzer method
T/CSTM 00780.3-2023 Methods for chemical analysis of sodium vanadate—Part 3: Determination of silicon，aluminum，etc. 12 impurity elements content —Inductively coupled plasma
T/QAS 082.13-2023 Chemical Analysis of Rock Salt and Glauber's Salt Part 13: Determination of 10 Metal Elements such as Beryllium and Barium by Inductively Coupled Plasma Mass Spectrometry
T/CWAN 0029.1-2021 Methods for chemical analysis of nickel-based welding materials - Part 1: Determination of multi-element content by inductively coupled plasma atomic emission spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Liquid Sample Elemental Analysis

GB/T 4298-1984 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
GB/T 42518-2023 Chemical Analysis of Trace Elements in Bismuth Germanate (BGO) Crystals by Glow Discharge Mass Spectrometry
GB/T 17418.7-2010 Methods for analysis of noble metals in geochemical samples.Part 7:Determination of platinum group elements.By nickel sulfide fire assay-inductively coupled plasma mass spectrometry
GB/T 14849.4-2008 Methods for chemical analysis of silicon metal.Part 4: Determination of elements content.Inductively coupled plasma atomic emission specrometric method
GB/T 13747.27-2020 Methods for chemical analysis of zirconium and zirconium alloys—Part 27：Determination of trace impurities content—Inductively coupled plasma mass spectrometry
GB/T 24794-2009 Photographic chemicals.Measurement methods of the trace elements in the organic compounds.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
GB/T 27598-2011 Photographic chemicals.Measurement methods of the trace elements in the inorganic compounds.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
GB/T 14849.4-2014 Methods for chemical analysis of silicon metal.Part 4:Determination of impurity contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 20975.25-2020(英文版) Methods for chemical analysis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method
GB/T 30701-2014 Surface chemical analysis.Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
GB/T 38513-2020 Methods for chemical analysis of niobium hafnium alloys—Determination of hafnium, titanium, zirconium, tungsten, tantalum contents—Inductively coupled plasma atomic emission spectrometry
GB/T 13747.26-2022 Methods for chemical analysis of zirconium and zirconium alloys—Part 26:Determination of alloying and impurity elements content—Inductively coupled plasma atomic emission spectrometry
GB/T 18114.8-2010 Chemical analysis methods of rare earth concentrates.Part 8: Determination of fifteen rare earth oxcide relative contents.Inductively coupled plasma emission spectrometry

Association Francaise de Normalisation, Liquid Sample Elemental Analysis

NF V18-247*NF EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
X11-634:1988 Particle size analysis. Characterization of the size and form of the elements of a granular population.
NF X10-340*NF ISO 9195:1992 Liquid flow measurement in open channels. Sampling and analysis of gravel-bed material.
NF EN 17053:2018 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage par ICP-MS (multiméthode) des éléments traces, métaux lourds et autres éléments inorganiques présents dans les aliments
NF V32-082*NF ISO 13685:1997 Ginger and ginger oleoresins. Determination of the main pungent components (gingerols and shogaols). Method using high-performance liquid chromatography.
FD CEN/TR 15298:2006 Produits alimentaires - Préparation d'échantillons gros volume pour l'analyse des mycotoxines - Comparaison entre broyage à sec et broyage par voie humide
FD CEN/TR 17245:2018 Qualité de l'eau - Rapport technique pour l'échantillonnage en routine de diatomées benthiques dans les rivières et les plans d'eau adapté pour les analyses en metabarcoding
NF A24-003:1985 Chemical analysis of zinc ores concentrates. Accurate determination of zinc samples by X-ray fluorescence spectrometry on sample solution containing an internal standard.
NF EN 17212:2019 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Détermination des teneurs en mélanine et en acide cyanurique par chromatographie liquide couplée à la spectrométrie de masse (LC-MS/MS)
NF EN 17547:2021 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Détermination de la teneur en vitamines A, E et D - Méthode utilisant la purification par extraction en phase solide (SPE) et la chromatographie liquide à haute performance (CLHP)
NF M60-421-1*NF EN ISO 15366-1:2016 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1 : samples containing plutonium in the microgram rang
NF M60-421-1:2015 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1 : samples containing plutonium in the microgram rang

British Standards Institution (BSI), Liquid Sample Elemental Analysis

BS EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis. Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
BS 6200-4:1989 Sampling and analysis of iron, steel and other ferrous metals - Recommendations for the order of listing elements in the chemical analysis of steel
BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
BS 6200-3.40.1:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and ...
BS 3680-10E:1993 Measurement of liquid flow in open channels. Sediment transport. Sampling and analysis of gravel bed material
BS 6200-3.40.2:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel c...
BS 6200-3.40.4:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt c...
BS 6200-3.40.3:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper c...
BS EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
PD ISO/TS 18409:2018 Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
BS ISO 15366-1:2014 Nuclear fuel technology. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography. Samples containing plutonium in the microgram range and urani
BS EN ISO 15366-1:2016 Nuclear fuel technology. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Samples containing plutonium in the microgram…
BS EN ISO 15366-2:2016 Nuclear fuel technology. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Samples containing plutonium and uranium in the…

ES-UNE, Liquid Sample Elemental Analysis

UNE-EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
UNE-EN ISO 15366-1:2016 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1: Samples containing plutonium in the microgram ra...
UNE-EN ISO 15366-2:2016 Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 2: Samples containing plutonium and uranium in the ...

Anhui Provincial Standard of the People's Republic of China, Liquid Sample Elemental Analysis

DB34/T 2127.4-2014 Methods of Analytical Samples for Regional Geochemical Surveys Part 4: Determination of Multielement Content by Plasma Mass Spectrometry
DB34/T 2127.3-2014 Methods of Analytical Analysis of Samples for Regional Geochemical Surveys Part 3: Determination of Multielement Content by Inductively Coupled Plasma Spectroscopy
DB34/T 2127.2-2014 Methods of Analysis of Samples for Regional Geochemical Surveys Part 2: Determination of Multielement Content by X-ray Fluorescence Spectrometry
DB34/T 2127.8-2014 Methods of Analysis of Samples for Regional Geochemical Surveys - Part 8: Determination of Multielement Content by Flame Atomic Absorption Spectrometry

European Committee for Standardization (CEN), Liquid Sample Elemental Analysis

EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements@ heavy metals and other elements in feed by ICP-MS (multi-method)
EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
FprEN 17547-2021 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography

NATO - North Atlantic Treaty Organization, Liquid Sample Elemental Analysis

AEP-6(F)-2009 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
AEP-6(E)-2003 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
AEP-6(C)-2000 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
STANAG 3977-2008 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-(6E) (ED 3; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Ph
STANAG 3977-1997 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-6(A) (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Ph
AEP-6(D)-2003 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUIFIED GASES FOR AIRCRAFT SERVICING (Supersedes AEP-6(C); To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so
STANAG 3977-1991 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-6 (ED 1 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@

Korean Agency for Technology and Standards (KATS), Liquid Sample Elemental Analysis

KS D 1674-2019 Methods for inductively coupled plasma spectrometric analysis of trace elements in gold
KS I ISO 4021-2005(2020) Hydraulic fluid power－Particulate contamination analysis－Extraction of fluid samples from lines of an operating system
KS D 1702-2015 Platium－Determination of trace-element content by inductively coupled plasma spectrometric analysis－Matrix matching method
KS D 1702-2005 Platium-Determination of trace-element content by inductively coupled plasma spectrometric analysis-Matrix matching method
KS D 1702-2015(2020) Platium－Determination of trace-element content by inductively coupled plasma spectrometric analysis－Matrix matching method

North Atlantic Treaty Organization Standards Agency, Liquid Sample Elemental Analysis

STANAG 3977-2009 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING - AEP-6

Professional Standard - Geology, Liquid Sample Elemental Analysis

DZ/T 0279.3-2016 Analytical methods of regional geochemical samples Part 3: Determination of 15 elements such as barium, beryllium and bismuth by inductively coupled plasma mass spectrometry
DZ/T 0279.32-2016 Analytical methods of regional geochemical samples Part 32: Determination of 15 rare earth elements such as lanthanum and cerium in closed acid solution-inductively coupled plasma mass spectrometry
DZ/T 0253.1-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 1:Determination of the content of 19 elements including lithium,boron, vanadium, etc..Inductively coupled plasma mass spectrometry
DZ/T 0279.33-2016 Analytical methods of regional geochemical samples Part 33: Determination of lanthanum, cerium and other 15 rare earth elements Alkali fusion-ion exchange-inductively coupled plasma atomic emission spectrometry
DZ/T 0064.80-2021 Groundwater Quality Analysis Methods Part 80: Determination of Lithium, Rubidium, Cesium and Other 40 Elements by Inductively Coupled Plasma Mass Spectrometry

Standard Association of Australia （SAA）, Liquid Sample Elemental Analysis

AS 4205.2:1994 Analysis of urine for trace elements - Determination of copper, cadmium and lead - Flame atomic absorption spectrometric method

Professional Standard - Commodity Inspection, Liquid Sample Elemental Analysis

SN/T 2698-2010 Elemental analysis of impurities in tungsten products.Inductively coupled plasma atomic emission spectrometric method

Japanese Industrial Standards Committee (JISC), Liquid Sample Elemental Analysis

JIS B 9936:2001 Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
JIS K 0400-52-30:2001 Water quality -- Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy

CEN - European Committee for Standardization, Liquid Sample Elemental Analysis

PREN 17270-2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of theobromine in feed materials and compound feed@ including cocoa derived ingredients@ by liquid chromatography - Complementary element

Professional Standard - Non-ferrous Metal, Liquid Sample Elemental Analysis

YS/T 473-2015 Methods for chemical analysis industrial gallium.Determination of impurity elements.ICP-MS analytical method
YS/T 473-2005 Determination of impurity elements in gallium for industrial use-ICP-MS analytical method
YS/T 474-2005 Determination of trace elements in high-purity gallium -ICP-MS analytical method
YS/T 742-2010 Methods for chemical analysis of gallium oxide Determination of impurities Inductively coupled plasma mass spectrometer method
YS/T 870-2013 Chemical analysis of high purity aluminium.Determination of trace impurities.Inductively coupled plasma mass spectrometry
YS/T 896-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 892-2013 Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 898-2013 Methods for chemical analysis of the high purity tantalum.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 900-2013 Methods for chemical analysis of the high purity tungsten.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 666-2008 Chemical analysis methods of gallium for industrial use.Determination of impurity elements.Inductively coupled plasma atomic emission spectrometric method
YS/T 928.5-2013 Methods for chemical analysis of nickel cobalt manganese composite hydroxide.Part 5:Determination of lead contents.Inductively coupled plasma mass spectrometry

Professional Standard - Petroleum, Liquid Sample Elemental Analysis

SY/T 6404-1999 Analytical method of metal elements in sediment rock by ICP-AES

Professional Standard - Agriculture, Liquid Sample Elemental Analysis

SN/T 5581-2023 Determination of monomer content in recycled acrylonitrile-butadiene-styrene copolymers by elemental analysis

工业和信息化部, Liquid Sample Elemental Analysis

YS/T 474-2021 Chemical Analysis Methods for High Purity Gallium Determination of Trace Elements Inductively Coupled Plasma Mass Spectrometry
YS/T 540.5-2018 Methods for chemical analysis of vanadium Part 5: Determination of impurity elements by inductively coupled plasma atomic emission spectrometry
YS/T 870-2020 Chemical Analysis Methods for Pure Aluminum Determination of Trace Impurity Element Contents Inductively Coupled Plasma Mass Spectrometry
YS/T 1261-2018 Hafnium Chemical Analysis Method Determination of Impurity Element Content Inductively Coupled Plasma Atomic Emission Spectrometry
YS/T 630-2016 Chemical analysis method of alumina Determination of impurity element content Inductively coupled plasma atomic emission spectrometry
YS/T 1262-2018 Chemical analysis methods for titanium sponge, titanium and titanium alloys. Determination of multi-element content by inductively coupled plasma atomic emission spectrometry.
YS/T 739.3-2020 Methods for chemical analysis of aluminum electrolytes Part 3: Determination of elemental contents of sodium, calcium, magnesium, potassium and lithium by inductively coupled plasma atomic emission spectrometry

UY-UNIT, Liquid Sample Elemental Analysis

UNIT 411-1975

AENOR, Liquid Sample Elemental Analysis

UNE 142404-3:2012 Fertilizers. Requirements for labelling. Part 3: Labelling for liquid inorganic fertilizers with primary nutrient elements.

国家能源局, Liquid Sample Elemental Analysis

SY/T 6404-2018 Inductively coupled plasma atomic emission spectrometry and mass spectrometry analysis methods of metal elements in rocks

American National Standards Institute （ANSI), Liquid Sample Elemental Analysis

ANSI/ASTM E2144:2011 Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

Henan Provincial Standard of the People's Republic of China, Liquid Sample Elemental Analysis

DB41/T 1439-2017 Trona chemical analysis method Determination of 11 elements such as sodium and potassium Inductively coupled plasma emission spectrometry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Liquid Sample Elemental Analysis

GJB 5404.11-2005 Analysis methods for trace elements in super alloys Part 11: Determination of tin content byeryllium hydroxide coprecipitation phenyl fluorone spectrophotometric method

Military Standard of the People's Republic of China-General Armament Department, Liquid Sample Elemental Analysis

GJB 8781.11-2015 Methods for trace element analysis of high-temperature alloys Part 11: Determination of tin content by beryllium hydroxide carrier precipitation-phenylfluorone spectrophotometric method

IX-EU/EC, Liquid Sample Elemental Analysis

93/1/EEC-1993 Commission Directive Amending Directive 77/535/EEC on the Approximation of the Laws of the Member States Relating to Methods of Sampling and Analysis for Fertilizers (Analysis Methods for Trace Elements)

Association of German Mechanical Engineers, Liquid Sample Elemental Analysis

VDI 2457 Blatt 4-2000 Gaseous emission measurement - Chromatographic determination of organic compounds - Sampling of acidic components in alkaline aqueous solution; Analysis by ion chromatography

Professional Standard - Rare Earth, Liquid Sample Elemental Analysis

XB/T 617.2-2014 Chemical analysis methods of neodymium iron boron alloy.Part 2: Determination of fifteen REO relative contents
XB/T 612.2-2019 Chemical analysis methods of scraps of neodymium iron boron-Part 2:Determination of fifteen REO relative contents-Inductively coupled plasma atomic emission spectrometry
XB/T 612.2-2009 Chemical analysis methods of scraps of neodymium iron boron-Part 2:Determination of fifteen REO relative contents-Inductively coupled plasma atomic emission spectrometry

国家质量监督检验检疫总局, Liquid Sample Elemental Analysis

SN/T 4501.1-2016 Methods for chemical analysis of nickel concentrates Part 1: Determination of elemental contents of nickel, cobalt, copper, manganese, magnesium and calcium by inductively coupled plasma atomic emission spectrometry