ZH
RU
ES
Cyclic voltammetry detection
Cyclic voltammetry detection, Total:61 items.
In the international standard classification, Cyclic voltammetry detection involves: Cycles, Radiation measurements, Testing of metals, Water quality, Energy and heat transfer engineering in general, Rubber and plastics products, Biology. Botany. Zoology, Electronic component assemblies, Electricity. Magnetism. Electrical and magnetic measurements, Pipeline components and pipelines, Buildings, Elements of buildings, Environmental testing, Structures of buildings.
Professional Standard - Medicine, Cyclic voltammetry detection
- YY/T 1258-2015 Homocysteine Detection Reagent (Box) (Enzyme Cycling Method)
British Standards Institution (BSI), Cyclic voltammetry detection
- BS EN 15918:2011+A2:2017 Cycles. Cycle trailers. Safety requirements and test methods
- BS EN 62022:2007 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
- BS EN ISO 4210-3:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Common test methods
- BS EN ISO 4210-6:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Frame and fork test methods
- BS EN ISO 4210-9:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Saddles and seat-post test methods
- BS EN ISO 4210-8:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Pedal and drive system test methods
- 21/30393381 DC BS EN ISO 4210-3. Cycles. Safety requirements for bicycles. Part 3. Common test methods
- 21/30393401 DC BS EN ISO 4210-7. Cycles. Safety requirements for bicycles. Part 7. Wheels and rims test methods
- 21/30393409 DC BS EN ISO 4210-9. Cycles. Safety requirements for bicycles. Part 9. Saddles and seat-post test methods
- 21/30393397 DC BS EN ISO 4210-6. Cycles. Safety requirements for bicycles. Part 6. Frame and fork test methods
- 21/30393405 DC BS EN ISO 4210-8. Cycles. Safety requirements for bicycles. Part 8. Pedal and drive system test methods
- BS ISO 18566-3:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Design of ceiling mounted radiant panels
- BS EN 60068-2-83:2011 Environmental testing. Tests. Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
- BS ISO 18566-2:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems - Determination of heating and cooling capacity of ceiling mounted radiant panels
- BS ISO 18566-4:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Control of ceiling mounted radiant heating and cooling panels
- BS EN ISO 19893:2018 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
Association Francaise de Normalisation, Cyclic voltammetry detection
- NF EN 14371:2004 Agents de surface - Détection de l'aptitude au moussage et du taux de moussage - Méthode par circulation
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cyclic voltammetry detection
- GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Thermal-cold cycling method
HU-MSZT, Cyclic voltammetry detection
SE-SIS, Cyclic voltammetry detection
- SIS SS IEC 295:1983 Nuclear instrumentation - D.C. periodmeters: characteristics and test methods
Group Standards of the People's Republic of China, Cyclic voltammetry detection
- T/CPCIF 0249-2023 Determination of N-methyldiethanolamine in industrial circulating water—Ion chromatography
- T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
National Metrological Technical Specifications of the People's Republic of China, Cyclic voltammetry detection
KR-KS, Cyclic voltammetry detection
ES-UNE, Cyclic voltammetry detection
- UNE-EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test (Endorsed by AENOR in May of 2009.)
- UNE-EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test (Endorsed by AENOR in May of 2009.)
- UNE-EN ISO 19893:2019 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
German Institute for Standardization, Cyclic voltammetry detection
- DIN EN 62137-1-3:2009-07 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008); German version EN 62137-1-3:2009
- DIN EN 62137-1-4:2009-08 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009); German version EN 62137-1-4:2009
- DIN 38406-16:1990 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
- DIN 38406-16:1990-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
- DIN EN 12293:1999 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
- DIN EN 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
- DIN EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008); German version EN 62137-1-3:2009
- DIN EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002
- DIN EN ISO 19893:2018-12 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011); German version EN ISO 19893:2018
- DIN EN 13687-3:2002 Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002
- DIN 38406-17:2009 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)
- DIN 38406-17:2009-10 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)
American Society for Testing and Materials (ASTM), Cyclic voltammetry detection
- ASTM D8301-21 Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
- ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
- ASTM A927/A927M-18 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
- ASTM E1105-00 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
- ASTM A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
- ASTM E1105-15 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- ASTM E1105-00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- ASTM E1105-15(2023) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- ASTM A912/A912M-11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
国家市场监督管理总局、中国国家标准化管理委员会, Cyclic voltammetry detection
- GB/T 38165-2019 Detection of circulating cell-free DNA concentration in human peripheral blood—Real-time PCR method based on Alu sequence
Lithuanian Standards Office , Cyclic voltammetry detection
- LST EN 62137-1-3-2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008)
海关总署, Cyclic voltammetry detection
- SN/T 5104-2019 Anodic stripping voltammetry detection method for heavy metals (zinc, cadmium, lead, copper, mercury, arsenic) in drinking water at border ports
ZA-SANS, Cyclic voltammetry detection
- SANS 12293:1999 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
Aerospace, Security and Defence Industries Association of Europe (ASD), Cyclic voltammetry detection
- ASD-STAN PREN 2591-F9-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part F9 - Optical Elements Effectiveness of Cable Attachment Cable Cyclic Flexing (Edition P 1)
NL-NEN, Cyclic voltammetry detection
- NEN-EN 302-3-1993 Adhesives for load-bearing timber stuctures. Test methods. Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength