ZH
RU
ES

The purpose of standard verification

The purpose of standard verification, Total:499 items.

In the international standard classification, The purpose of standard verification involves: Quality, Nuclear energy engineering, Industrial automation systems, Mechanical testing, Construction materials, Metrology and measurement in general, Analytical chemistry, Welding, brazing and soldering, Languages used in information technology, Test conditions and procedures in general, Thermodynamics and temperature measurements, Iron and steel products, Non-destructive testing, Terminology (principles and coordination), Standardization. General rules, Products of the textile industry, Applications of information technology, Linear and angular measurements, Road engineering, Measurement of force, weight and pressure, Measurement of volume, mass, density, viscosity, Radiation measurements, Wastes, Law. Administration, Acoustics and acoustic measurements, On-board equipment and instruments, Protection against crime, Fuels, Open systems interconnection (OSI), Raw materials for rubber and plastics, Coals, Testing of metals, Aerospace fluid systems and components, Integrated circuits. Microelectronics, Vocabularies, Valves, Software development and system documentation, Laboratory medicine, Sports equipment and facilities, Natural gas, Production of metals, Insulating fluids, Insulating materials, Pharmaceutics, Protective equipment, Installations in buildings, Medical sciences and health care facilities in general, Measurement of fluid flow, Environmental protection, Equipment for the chemical industry, Optics and optical measurements, Protection against fire, Company organization and management, Soil quality. Pedology, Metalliferous minerals, Aircraft and space vehicles in general, Road vehicles in general, Electrical wires and cables, Paint ingredients, Rubber, Character sets and information coding, Shipbuilding and marine structures in general, Fasteners, Services, Energy and heat transfer engineering in general, Conducting materials, Plastics, Microprocessor systems, Sensory analysis, Pumps, Packaging materials and accessories, Animal feeding stuffs, Audio, video and audiovisual engineering, Construction industry, Electromechanical components for electronic and telecommunications equipment, Lubricants, industrial oils and related products, Leisure. Tourism, Sterilization and disinfection, Packaging and distribution of goods in general, Products of the chemical industry, Information sciences. Publishing, Water quality.

American Society for Testing and Materials (ASTM), The purpose of standard verification

• ASTM E2659-15 Standard Practice for Certificate Programs
• ASTM E4-79 Standard Methods of Load Verification Of Testing Machines
• ASTM E3291-21 Standard Guide for Reliability Demonstration Testing
• ASTM E2617-08 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E2617-08a Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E2617-08ae1 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E2617-09 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E2617-09a Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E2617-17 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
• ASTM E4-02 Standard Practices for Force Verification of Testing Machines
• ASTM E4-20 Standard Practices for Force Verification of Testing Machines
• ASTM E4-21 Standard Practices for Force Verification of Testing Machines
• ASTM E4-10 Standard Practices for Force Verification of Testing Machines
• ASTM E2857-11(2021)e1 Standard Guide for Validating Analytical Methods
• ASTM E2857-21 Standard Guide for Validating Analytical Methods
• ASTM E2857-22 Standard Guide for Validating Analytical Methods
• ASTM E2857-11(2016) Standard Guide for Validating Analytical Methods
• ASTM E2857-11 Standard Guide for Validating Analytical Methods
• ASTM F2717-14(2019) Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
• ASTM E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers
• ASTM E77-98 Standard Test Method for Inspection and Verification of Thermometers
• ASTM E77-14 Standard Test Method for Inspection and Verification of Thermometers
• ASTM E4-16 Standard Practices for Force Verification of Testing Machines
• ASTM A802/A802M-95(1996) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
• ASTM A802-19 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
• ASTM E2428-22 Standard Practice for Calibration and Verification of Elastic Torque Measurement Standards
• ASTM E2428-15 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
• ASTM E2428-14 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
• ASTM D5430-07(2011) Standard Test Methods for Visually Inspecting and Grading Fabrics
• ASTM D5430-13 Standard Test Methods for Visually Inspecting and Grading Fabrics
• ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
• ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
• ASTM E2428-15a Standard Practice for Calibration and Verification of Torque Transducers
• ASTM C1426-14 Standard Practices for Verification and Calibration of Polarimeters
• ASTM F2508-15 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F2508-16e1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F2508-12 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F2508-13 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F2508-12a Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F3153-15 Standard Specification for Verification of Avionics Systems
• ASTM D5430-04 Standard Test Methods for Visually Inspecting and Grading Fabrics
• ASTM D5430-07 Standard Test Methods for Visually Inspecting and Grading Fabrics
• ASTM E74-04 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
• ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
• ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
• ASTM C1750-21 Standard Guide for Development, Verification, Validation, and Documentation of Simulants for Hazardous Materials and Process Streams
• ASTM C1750-17 Standard Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
• ASTM E2658-11 Standard Practices for Verification of Speed for Material Testing Machines
• ASTM E2658-15 Standard Practices for Verification of Speed for Material Testing Machines
• ASTM E2658-15(2023) Standard Practices for Verification of Speed for Material Testing Machines
• ASTM E74-18 Standard Practices for Calibration and Verification for Force-Measuring Instruments
• ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
• ASTM E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes
• ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
• ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
• ASTM E1762-95 Standard Guide for Electronic Authentication of Health Care Information
• ASTM E2374-15 Standard Guide for Acoustic Emission System Performance Verification
• ASTM E2374-16 Standard Guide for Acoustic Emission System Performance Verification
• ASTM E2374-16(2021) Standard Guide for Acoustic Emission System Performance Verification
• ASTM F3153-22 Standard Specification for Verification of Aircraft Systems and Equipment
• ASTM F1062-97 Standard Test Method for Verification of Ski Binding Test Devices
• ASTM E3078/E3078M-20e1 Standard Practice for Conditioning of Hard Armor Test Items
• ASTM E3078/E3078M-20 Standard Practice for Conditioning of Hard Armor Test Items
• ASTM E3078/E3078M-19 Standard Practice for Conditioning of Hard Armor Test Items
• ASTM E3078-17 Standard Practice for Conditioning of Hard Armor Test Items
• ASTM A802-95(2010)e2 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
• ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
• ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
• ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
• ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
• ASTM A997-08 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
• ASTM A997/A997M-23 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
• ASTM A997-08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
• ASTM E2374-04 Standard Guide for Acoustic Emission System Performance Verification
• ASTM F3109-23 Red Standard Practice for Verification of Multi-Axis Force Measuring Platforms (Standard + Redline PDF Bundle)
• ASTM F310-70(2000) Standard Practice for Sampling Cryogenic Aerospace Fluids
• ASTM E2916-19 Standard Terminology for Digital and Multimedia Evidence Examination
• ASTM E2916-18 Standard Terminology for Digital and Multimedia Evidence Examination
• ASTM C1093-22 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM E2916-19e1 Standard Terminology for Digital and Multimedia Evidence Examination
• ASTM E2849-13 Standard Practice for Professional Certification Performance Testing
• ASTM F2174-02(2015) Standard Practice for Verifying Acoustic Emission Sensor Response
• ASTM F3109-16 Standard Test Method for Verification of Multi-Axis Force Measuring Platforms
• ASTM F2174-02(2019) Standard Practice for Verifying Acoustic Emission Sensor Response
• ASTM F3109-23 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
• ASTM F3109-22 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
• ASTM C1093-22a Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM F2174-02(2023) Standard Practice for Verifying Acoustic Emission Sensor Response
• ASTM E2847-21 Standard Test Method for  Calibration and Accuracy Verification of Wideband Infrared Thermometers
• ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
• ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
• ASTM E3078/E3078M-23 Standard Practice for Conditioning of Hard Armor Test Items
• ASTM E2975-23 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
• ASTM E2549-09 Standard Practice for Validation of Seized-Drug Analytical Methods
• ASTM E2709-19 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM E2709-19(2023) Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM E83-23 Standard Practice for Verification and Classification of Extensometer Systems
• ASTM E2709-23 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM F1062-97(2013) Standard Test Method for Verification of Ski Binding Test Devices
• ASTM E2443-05 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
• ASTM E2443-05(2010) Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
• ASTM E1476-04(2022) Standard Guide for Metals Identification, Grade Verification, and Sorting
• ASTM D7299-20 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
• ASTM D729-95 Standard Practice for Verifying Vertical Inclinometer Probe Performance
• ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
• ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
• ASTM E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
• ASTM D1524-15 Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
• ASTM E2593-07e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
• ASTM E2593-12 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
• ASTM F1236-23 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
• ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
• ASTM F2508-11 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces
• ASTM E2659-18 Standard Practice for Certificate Programs
• ASTM E2659-09 Standard Practice for Certificate Programs
• ASTM E2659-17 Standard Practice for Certificate Programs
• ASTM E2443-05(2018)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
• ASTM F2812-12(2018) Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
• ASTM E2161-07 Standard Terminology Relating to Performance Validation in Thermal Analysis
• ASTM E2161-07a Standard Terminology Relating to Performance Validation in Thermal Analysis
• ASTM E1843-96(2003) Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
• ASTM E1843-96 Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
• ASTM C1093-95(2001) Standard Practice for Accreditation of Testing Agencies for Unit Masonry
• ASTM C1093-08 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM E83-10a Standard Practice for Verification and Classification of Extensometer Systems
• ASTM E1843-96(2010) Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
• ASTM C1093-95 Standard Practice for Accreditation of Testing Agencies for Unit Masonry
• ASTM D3764-19 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
• ASTM D3764-01 Standard Practice for Validation of Process Stream Analyzer Systems
• ASTM E2709-14e1 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM C1093-15 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM C1093-15ae1 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
• ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
• ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
• ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
• ASTM E3004-22 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
• ASTM E3004-15e1 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
• ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
• ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
• ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
• ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
• ASTM E2161-15 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2975-16 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
• ASTM E2975-16e1 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
• ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
• ASTM F2508-16 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM D1524-15(2022) Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
• ASTM E2708-16 Standard Terminology for Accreditation and Certification
• ASTM E2629-19 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
• ASTM E2214-16 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2214-19 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2214-08 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2214-18 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2629-20 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
• ASTM E2214-17 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2214-20 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2898-13 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
• ASTM E2593-11 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
• ASTM F2717-14 Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
• ASTM D7299-06 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
• ASTM D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
• ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
• ASTM D3764-23 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
• ASTM E3175-23 Standard Practice for Training in the Forensic Examination of Hair by Microscopy
• ASTM D5255-15(2023) Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
• ASTM E2898-14 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
• ASTM F3298-19 Standard Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS)
• ASTM D5255-14 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
• ASTM D332-87(2011) Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
• ASTM E1368-23 Standard Practice for Visual Inspection of Asbestos Abatement Projects
• ASTM F1037-04 Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
• ASTM E2680-09(2015)e1 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
• ASTM E2443-05(2010)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
• ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
• ASTM E2309-05 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
• ASTM F1940-07a(2014) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
• ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
• ASTM F2575-06 Standard Guide for Quality Assurance in Translation
• ASTM D1524-94(2004) Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
• ASTM D1524-94(1999) Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
• ASTM D1524-94(2010) Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
• ASTM E1606-20 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
• ASTM D4274-16 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
• ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
• ASTM E1958-19a Standard Guide for Sensory Claim Substantiation
• ASTM C1586-05 Standard Guide for Quality Assurance of Mortars
• ASTM C1586-04 Standard Guide for Quality Assurance of Mortars
• ASTM E1958-06 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-98 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-07e1 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-12 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-19 Standard Guide for Sensory Claim Substantiation
• ASTM C1586-17 Standard Guide for Quality Assurance of Mortars
• ASTM C1586-18 Standard Guide for Quality Assurance of Mortars
• ASTM E1958-20 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-21 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-18 Standard Guide for Sensory Claim Substantiation
• ASTM C1586-05(2011) Standard Guide for Quality Assurance of Mortars
• ASTM E3315-21 Standard Specification for Certification of Metallic Materials
• ASTM E1958-16 Standard Guide for Sensory Claim Substantiation
• ASTM E1958-16a Standard Guide for Sensory Claim Substantiation
• ASTM E2659-09e1 Standard Practice for Certificate Programs
• ASTM C1586-20 Standard Guide for Quality Assurance of Mortars
• ASTM E1958-22 Standard Guide for Sensory Claim Substantiation
• ASTM E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
• ASTM E2161-22 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-22a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-21 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-21a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-21b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-15(2019) Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-22b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2709-10 Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure
• ASTM E2593-11e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
• ASTM F3601-23 Standard Practice for Structural Finite Element Model Verification and Validation
• ASTM D5337-23 Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
• ASTM D3764-22 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
• ASTM E2161-23b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM C5-18 Standard Specification for Quicklime for Structural Purposes
• ASTM F3298-18 Standard Specification for Design, Construction, and Verification of Fixed-Wing Unmanned Aircraft Systems (UAS)
• ASTM F1886-98(2004) Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
• ASTM F1886-98 Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
• ASTM E2428-08 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
• ASTM E2327-04 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
• ASTM E2327-10 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
• ASTM D3823-07(2012) Standard Practice for Determining Ticket Numbers for Sewing Threads
• ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
• ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
• ASTM E2309/E2309M-16 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
• ASTM F1037-05 Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
• ASTM A1015-01 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM A1015-01(2005) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM A1015-01(2009) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM A1015-01(2014) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM F1595-00(2005) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
• ASTM D5182-97(2008) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
• ASTM F1595-00(2012) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
• ASTM F2713-21 Standard Specification for Eye Protectors for Field Hockey
• ASTM D4274-11 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
• ASTM E323-80(1996)e1 Standard Specification for Perforated-Plate Sieves for Testing Purposes
• ASTM F2981-15 Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
• ASTM F2981-15(2020) Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
• ASTM E2117-00 Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
• ASTM E2876-13(2020) Standard Guide for Integrating Sustainable Objectives into Cleanup
• ASTM E2075/E2075M-15(2020) Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
• ASTM E3244-20 Standard Practice for Integrity Assurance and Testing of Single-Use Systems
• ASTM E2327-15 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
• ASTM E2327-15e1 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
• ASTM E2075/E2075M-15 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
• ASTM D4787-13(2018) Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
• ASTM E2161-23 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM E2161-23a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
• ASTM D8294-21 Standard Practice for Estimating pH to Verify Status of Aqueous Samples

GB-REG, The purpose of standard verification

• REG GSFC-STD-7000-2005 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) For GSFC Flight Programs and Projects
• REG NASA-LLIS-1033-2001 Lessons Learned ?Controlling Risk on Cost-Capped, Schedule-Driven, Technology Validation Projects (1998)
• REG NASA-LLIS-1492--2004 Lessons Learned - Standards, Specifications and Processes for Projects with Outside Partners
• REG 33 CFR PART 220-2011 DESIGN CRITERIA FOR DAM AND LAKE PROJECTS

AASHTO - American Association of State Highway and Transportation Officials, The purpose of standard verification

• T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
• T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
• T 67-1985 Standard Method of Test for Standard Practices for Load Verification of Testing Machines
• T 67-2004 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-02)
• T 67-2003 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-01)
• T 67-1996 Standard Specification for Standard Practices for Force Verification of Testing Machines (Eighteenth Edition; ASTM E4-94)
• T 67-1997 Standard Specification for Standard Practices for Force Verification of Testing Machines (Nineteenth Edition; ASTM E4-96)
• T 67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (Twentieth Edition; ASTM E4-98a)
• R 38-2010 Standard Practice for Quality Assurance of Standard Manufactured Materials
• R 38-2009 Standard Practice for Quality Assurance of Standard Manufactured Materials
• R 38-2004 Standard Practice for Quality Assurance of Standard Manufactured Materials
• R 29-2008 Standard Practice for Grading or Verifying the Performance Grade (PG) of an Asphalt Binder
• R 29-2014 Standard Practice for Grading or Verifying the Performance Grade (PG) of an Asphalt Binder

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The purpose of standard verification

• GB/T 9226-1988 Certification of standardized radioactive sources
• GB 9226-1988 Certificate of Inspection for Standard Radioactive Sources

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The purpose of standard verification

• ASHRAE MN-00-12-1-2000 Field Validation of Standard 152P (RP-1056)
• ASHRAE SE-99-6-2-1999 Validation of Two French Building Energy Programs@ Part 1: Analytical Verification
• ASHRAE SE-99-6-3-1999 Validation of Two French Building Energy Programs@ Part 2: Parameter Estimation Method Applied to Empirical Validation
• ASHRAE MN-00-12-3-2000 Validation of ASHRAE Standard 152P in Basement Warm-Air Distribution Systems

Danish Standards Foundation, The purpose of standard verification

• DS/EN 45002:1991 General criteria for the assessment of testing laboratories
• DS/EN 419251-3:2013 Security requirements for device for authentication - Part 3: Additional functionality for security targets
• DS/ISO 10241-2:2012 Terminological entries in standards - Part 2: Adoption of standardized terminological entries
• DS/CEN ISO/TR 24094:2008 Analysis of natural gas - Validation methods for gaseous reference materials
• DS/EN 16214-3:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes
• DS/CWA 14171:2004 General guidelines for electronic signature verification
• DS/ISO 15188:2002 Project management guidelines for terminology standardization
• DS/EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes)

Institute of Electrical and Electronics Engineers (IEEE), The purpose of standard verification

• IEEE P1012/D18, January 2016 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
• IEEE P1647/D3, April 2019 IEEE Approved Standard for the Functional Verification Language e
• IEEE Std 1647-2006 IEEE Standard for the Functional Verification Language 'e'
• IEEE 1647/D3, April 2016 IEEE Approved Draft Standard for the Functional Verification Language e
• IEEE 1647/D8+3, December 2010 IEEE Draft Standard for the Functional Verification Language 'e'
• IEEE 1450.3-2007 Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450?1999) for Tester Target Specification Computer Society
• IEEE Std 1800-2005 IEEE Standard for SystemVerilog: Unified Hardware Design, Specification and Verification Language
• IEEE Std 1800-2012 IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification Language
• IEEE Std 1800-2017 IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification Language
• IEEE Std 1012a-1998 IEEE Standard for Software Verification and Validation - Content Map to IEEE 12207.1
• IEEE Std P1800.2/D7, November 2016 IEEE Approved Draft Standard for Universal Verification Methodology Language Reference Manual
• IEEE P1012/D17, August 2015 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
• IEEE Std 1800-2009 IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification Language - Redline
• IEEE Std P1647/D6 Unapproved IEEE Draft Standard for the Functional Verification Language 'E' (Replaced by the Approved IEEE Draft)
• IEEE Std P1012/D12 Approved IEEE Draft Standard for Software Verification and Validation (Superseded by IEEE 1012-2004)
• IEEE P1800.2/D7, October 2019 IEEE Draft Standard for Universal Verification Methodology Language Reference Manual
• IEEE P1800.2/D6, July 2016 IEEE Draft Standard for Universal Verification Methodology Language Reference Manual
• IEEE Std 1667-2015 IEEE Standard for Discovery, Authentication, and Authorization in Host Attachments of Storage Devices
• IEEE 1667-2018 IEEE Standard for Discovery, Authentication, and Authorization in Host Attachments of Storage Devices
• IEEE P1800/D3, April 2017 IEEE Draft Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification Language
• IEEE Unapproved Draft Std P1800/D8, Feb, 2009 IEEE Draft Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification Language
• IEEE P1801/D12, July 2018 IEEE Approved Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
• ANSI Std N42.15-1980 American National Standard Performance Verification of Liquid-Scintillation Counting System
• IEEE Std 1667-2009 IEEE Standard for Authentication in Host Attachments of Transient Storage Devices - Redline
• IEEE Unapproved Draft Std P1647/D9, Jan 2007 IEEE Draft Standard for the Functional Verification Language 'E' (Revision of IEEE 1647-2006)
• IEEE/IEC 61523-4-2015 IEEE/IEC International Standard - Design and Verification of Low-Power Integrated Circuits
• IEC 61523-4:*IEEE Std 1801-201:2015 IEEE/IEC International Standard - Design and Verification of Low-Power Integrated Circuits
• IEC 61523-4 Edition 1.0 2015-03 (IEEE Std 1801-2013) IEEE/IEC International Standard - Design and Verification of Low-Power Integrated Circuits
• IEEE Std 1058.1-1987 IEEE Standard for Software Project Management Plans
• IEEE Std 1058-1998 IEEE Standard for Software Project Management Plans
• IEEE P1597.1/D8, October 2021 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
• IEEE P1597.1 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
• P1597.1/D8, October 2021 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations

Association of German Mechanical Engineers, The purpose of standard verification

• VDI/VDE 3517 Blatt 2-2003 Validation of control systems - Execution of process control projects subject to validation (prospective validation)

ZA-SANS, The purpose of standard verification

• SANS 6150:2006 Verification of compression testing machines for concrete: Calibration of load scale
• SANS 603:2007 Reference materials - Contents of certificates and labels

Alliance of Telecommunications Industry Solutions （ATIS), The purpose of standard verification

• ATIS T1.TR.22-1993 Privacy and Authentication Objectives for Wireless Access to Personal Communications
• ATIS T1.TR.29-1994 Program Management of Standards for Complex Projects

ATIS - Alliance for Telecommunications Industry Solutions, The purpose of standard verification

• T1.TR.22-1993 Privacy and Authentication Objectives for Wireless Access to Personal Communications
• T1.TR.29-1994 Program Management of Standards for Complex Projects
• T1.TR.26-1993 Program Management of Standards for Personal Communications

Audio Engineering Society, The purpose of standard verification

• AES 43-2000 AES tandard for Forensic Purposes - Criteria for the Authentication of Analog Audio Tape Recordings 2000-01-14 Printing

American Welding Society (AWS), The purpose of standard verification

• AWS QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS [Superseded: AWS QC1-QC2]
• AWS QC17-2002 STANDARD FOR ACCREDITATION OF WELDING FABRICATORS FOR AWS CERTIFIED WELDING FABRICATOR PROGRAM
• AWS QC7-1993 Standard for AWS Certified Welders [Superseded: AWS QC3]

American National Standards Institute （ANSI), The purpose of standard verification

• ANSI/IEEE 1647:2011 Standard for the Functional Verification Language e
• ANSI/NCEES MLS2-2009 Standards for Licensure as a Model Law Surveyor
• ANSI/IEEE 1801:2009 Standard for Design and Verification of Low Power Integrated Circuits
• ANSI/FCI 79-1-2009 Standard for Proof of Pressure Ratings for Pressure Regulators
• ANSI/ASTM E2708 REV A:2018 Standard Terminology for Accreditation and Certification
• ANSI/ASTM E2708 REV A:2021 Standard Terminology for Accreditation and Certification
• ANSI/NFPA 1031-2013 Standard for Professional Qualifications for Fire Inspector and Plan Examiner
• ANSI/ASME V&V10.1-2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics

SE-SIS, The purpose of standard verification

• SIS SS-EN 45 003-1989 General Criteria for laborator/ accreditation bodies
• SIS SS-EN 45 011-1989 General criteria for certification bodies operatingproduct certification

Association Francaise de Normalisation, The purpose of standard verification

• XP CEN/TS 12169:2008 Critères de vérification de la conformité d'un lot de bois scié
• NF X03-001-2*NF ISO 10241-2:2012 Terminological entries in standards - Part 2 : adoption of standardized terminological entries
• NF E29-316-3*NF EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.
• NF E29-316-2*NF EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves
• NF E29-316-4*NF EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves
• NF E29-316-1*NF EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1 : general requirements
• NF EN ISO 11546-2:2009 Acoustique - Détermination de l'isolement acoustique des encoffrements - Partie 2 : mesurages sur site (aux fins d'acceptation et de vérification)
• NF X30-140-3*NF EN 16214-3+A1:2017 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3 : biodiversity and environmental aspects related to nature protection purposes
• NF X30-140-3/IN1*NF EN 16214-3/IN1:2017 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3 : Biodiversity and environmental aspects related to nature protection purposes
• NF T46-084:2012 Rubber - Calibration and verification of hardness testers.
• CWA 14171:2004 General guidelines for electronic signature verification
• NF EN 16602-70-18:2016 Assurance produit des projets spatiaux - Préparation, assemblage et montage des câbles radiofréquence coaxiaux
• NF EN 16214-3/IN1:2017 Critères de durabilité pour la production de biocarburants et de bioliquides pour des applications énergétiques - Principes, critères, indicateurs et vérificateurs - Partie 3 : biodiversité et aspects environnementaux liés aux objectifs de prot...
• NF EN 16214-3+A1:2017 Critères de durabilité pour la production de biocarburants et de bioliquides pour des applications énergétiques - Principes, critères, indicateurs et vérificateurs - Partie 3 : biodiversité et aspects environnementaux liés aux objectifs de prot...
• NF E29-316-5*NF EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves
• XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
• XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
• FD CEN/TR 16059:2011 Analyse des produits alimentaires - Critères de performance des méthodes validées monolaboratoires d'analyse des mycotoxines
• NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques

British Standards Institution (BSI), The purpose of standard verification

• BS ISO 10241-2:2012 Terminological entries in standards. Adoption of standardized terminological entries
• BS EN 419251-3:2013 Security requirements for device for authentication. Additional functionality for security targets
• BS ISO/IEC ISP 15125-7:1999 Information technology. International Standardized Profiles ADYnn. OSI Directory. ADY43. DSA to DSA authentication
• PD CEN ISO/TR 24094:2007 Analysis of natural gas. Validation methods for gaseous reference materials
• BS EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves
• BS EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves
• BS EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements
• BS EN 16214-3:2012+A1:2017 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Biodiversity and environmental aspects related to nature protection purposes
• PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
• BS ISO 17741:2016 General technical rules for measurement, calculation and verification of energy savings of projects
• BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
• BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques

US-DOT, The purpose of standard verification

• DOT 49 CFR PART 1522-2010 TSA-APPROVED VALIDATION FIRMS AND VALIDATORS

IN-BIS, The purpose of standard verification

• IS 7097-1973

IT-UNI, The purpose of standard verification

• ANCC M.1.A-1973

The American Road & Transportation Builders Association, The purpose of standard verification

• AASHTO T67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine Twentieth Edition; ASTM E4-98a
• AASHTO R 38-2009 Standard Practice for Quality Assurance of Standard Manufactured Materials
• AASHTO R 44-2007 Standard Practice for Independent Assurance (IA) Programs
• AASHTO R 38-2010 Standard Practice for Quality Assurance of Standard Manufactured Materials
• AASHTO R 29-2014 Standard Practice for Grading or Verifying the Performance Grade (PG) of an Asphalt Binder
• AASHTO R 29-2015 Standard Practice for Grading or Verifying the Performance Grade (PG) of an Asphalt Binder

RU-GOST R, The purpose of standard verification

• GOST R 51963-2002 Standard radionuclide solutions and standard ionizing radiation radionuclide sources. Verification certificate contents
• GOST R 51725.4-2014 Catalogization of products for federal state needs. Standard format the description of items of supply. Rules for development, approval, maintaining and application
• GOST R 54360-2011 Laboratory information management systems (LIMS). Standard quide for validation of LIMS
• GOST R 8.566-1996 The state system for ensuring the uniformity of measurements. Standard radiation sources (reference sources) in form of black body models for temperature range -50 +2500 °C. Standard procedure for metrological certification and verification
• GOST ISO Guide 31-2014 Reference materials. Contents of certificates (passports) and labels
• GOST R 8.919-2016 State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification
• GOST R 8.877-2014 The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification

CEN - European Committee for Standardization, The purpose of standard verification

• PREN 16248-3-2011 Security requirements for device for authentication - Part 3: Additional functionality for security targets
• EN ISO 17662:2005 Welding - Calibration@ verification and validation of equipment used for welding@ including ancillary activities

German Institute for Standardization, The purpose of standard verification

• DIN EN 419251-3:2013-06 Security requirements for device for authentication - Part 3: Additional functionality for security targets; German version EN 419251-3:2013
• DIN EN ISO 7500-1 Beiblatt 2:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and...
• DIN VDE 0472 Bb.1:2005 Testing of cables, wires and flexible cords - List of the standards series DIN VDE 0472 (VDE 0472)
• DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
• DIN EN 16214-3:2017-10 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes; German version EN 162...
• DIN EN ISO 7500-1 Beiblatt 3:2023-03 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for requirements, veri...
• DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:2009

ES-UNE, The purpose of standard verification

• UNE-EN 419251-3:2013 Security requirements for device for authentication - Part 3: Additional functionality for security targets (Endorsed by AENOR in April of 2013.)
• UNE-CEN ISO/TR 24094:2012 IN Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006)
• UNE-EN 9215:2023 Programme Management - Definition Justification and Qualification - A guide to drawing up the definition justification plan and of the definition justification dossier (Endorsed by Asociación Española de Normalización in August of 2023.)
• UNE-EN 16214-3:2013+A1:2018 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes

European Committee for Standardization (CEN), The purpose of standard verification

• EN 419251-3:2013 Security requirements for device for authentication - Part 3: Additional functionality for security targets
• EN 16214-3:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes
• EN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
• CEN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
• PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
• EN ISO 17662:2016 Welding - Calibration@ verification and validation of equipment used for welding@ including ancillary activities

Standard Association of Australia （SAA）, The purpose of standard verification

• TR 2.14-1999 Certified reference materials - Coke - Preparation and certification of ASCRM 014
• TR 2.12D-2-1998 Certified reference materials - Coal - Preparation and certification of ASCRM 012D-2
• AS 3870:1991 Certified reference materials - General guide to material selection, preparation, testing and certification
• TR 2.3-2-1993 Certified reference materials - Electrode carbon - Preparation and certification of ASCRM 003-2 (for use in Gray-King coke type test (AS 1038.12.2))
• TR 2.12A-2-2002 Certified reference materials - Coal - Preparation and certification of ASCRM 012A-2
• ASCRM 014-1999 Certified reference material - Coke
• AS/NZS 5911(Int):2005 General guidelines on the verification, validation and assurance of environmental and sustainability reports
• TR 2.8-1985 Certified reference materials - Zircon sand concentrate - Preparation and certification of ASCRM 008
• HB 19.31-1991 Reference materials - Guide 31 - Contents of certificates of reference materials
• HB 19.33-1991 Reference materials - Guide 33 - Uses of certified reference materials

International Organization for Standardization (ISO), The purpose of standard verification

• ISO 10241-2:2012 Terminological entries in standards - Part 2: Adoption of standardized terminological entries
• ISO Guide 33:1989 Uses of certified reference materials
• ISO GUIDE 31:1981 Contents of certificates of reference materials
• ISO Guide 5:1976 Designation of internationally standardized items
• ISO Guide 31:2000 Reference materials - Contents of certificates and labels
• ISO Guide 33:2000 Uses of certified reference materials
• ISO/IEC GUIDE 7:1982 Requirements for standards suitable for product certification
• ISO 17741:2016 General technical rules for measurement, calculation and verification of energy savings of projects
• ISO 9699:1994 Performance standards in building - Checklist for briefing - Contents of brief for building design
• ISO 15188:2001 Project management guidelines for terminology standardization
• ISO/TR 8393:1985 Documentation; ISO bibliographic filing rules (International Standard Bibliographic Filing Rules); Exemplification of Bibliographic filing principles in a model set of rules

HU-MSZT, The purpose of standard verification

• MI 18931/2-1988
• MI 1702-1969
• MSZ 3423/1-1983
• MI 18930/3-1988
• MSZ 1739-1963

CU-NC, The purpose of standard verification

• NC 90-15-36-1988 Standards System for Metrological Assurance. PE-11 Tester. Methods and Means of Verification
• NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification
• NC 90-15-37-1988 Standards System for Metrological Assurance. 1. to 5. Class Measuring Clamps. Methods and Means of Verification
• NC 90-09-09-1988 Standards System for Metrologxcal Assurance. Standard and Working-Indentors for Measuring Metals Hardness. Methods and Means of Verification
• NC 90-04-18-1988 Standards System for Metrological Assurance. Tanker Truck for Oil and By-Products. Methods and Means of Verification
• NC 90-19-15-1987 Metrological Assurance. HighStability Standard Generators Verification Methods and Means
• NC 90-15-38-1988 Standards System for Metrological Assurance. National Standard of Electric Resistance Unit.
• NC 90-04-22-1988 Standards System for Metrological Assurance. Glass-made Capacity Measures for General Use. Methods and Means of Verification

API - American Petroleum Institute, The purpose of standard verification

• API MPMS 4.8-1995 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

PL-PKN, The purpose of standard verification

• PN EN 45011-1993 General criteria for certification bodies operating product certification
• PN EN 45013-1993 General criteria for certification bodies operating certification of personnel
• PN EN 45012-1993 General criteria for certification bodies operating quality system certification

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The purpose of standard verification

• ASHRAE QC-06-034-2006 Model Validation and Testing: The Methodological Foundation of ASHRAE Standard 140
• ASHRAE OR-10-035-2010 Development and Validation of a Fan Performance Model for Typical Packaged HVAC Systems

Korean Agency for Technology and Standards (KATS), The purpose of standard verification

• KS I ISO 24094-2010(2021) Analysis of natural gas－Validation methods for gaseous reference materials
• KS A ISO GUIDE 33:2005 Uses of certified reference materials
• KS A ISO GUIDE 33:2017 Reference materials — Good practice in using reference materials
• KS M ISO 18898:2021 Rubber — Calibration and verification of hardness testers
• KS M ISO 18898:2015 Rubber－Calibration and verification of hardness testers
• KS X ISO 15188:2005 Project management guidelines for terminology standardization

未注明发布机构, The purpose of standard verification

• BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials

Society of Automotive Engineers (SAE), The purpose of standard verification

• SAE ARP1192B-1991 PROCEDURE FOR CALIBRATION AND VERIFICATION OF A LIQUIDBORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
• SAE ARP1192A-1978 PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUID-BORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD

SAE - SAE International, The purpose of standard verification

• SAE ARP1192B-1987 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
• SAE ARP1192C-2000 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard

AENOR, The purpose of standard verification

• UNE 82133:2004 IN Uses of certified reference materials
• UNE-EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
• UNE 157601:2007 General criteria for the project of general activities.
• UNE-EN 16214-3:2013 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes

Japanese Industrial Standards Committee (JISC), The purpose of standard verification

• JIS Q 0031:1997 Contents of certificates of reference materials
• JIS Q 0031:2002 Reference materials -- Contents of certificates and labels
• JIS B 7725:2020 Vickers hardness test -- Verification and calibration of testing machines
• JIS B 7734:2020 Knoop hardness test -- Verification and calibration of testing machines

Professional Standard - Agriculture, The purpose of standard verification

• 878兽药典 一部-2015 Appendix Contents 9000 Guidelines 9101 Guidelines for Validation of Analytical Methods for Quality Standards of Veterinary Drugs
• 第1．1．5章OIE陆生动物诊断试验和疫苗手册-第七版 General Standard-Introduction-Principles and Methods of Validation of Diagnostic Tests for Infectious Diseases
• 844兽药典 二部-2015 Appendix Contents 9000 Guiding Principles 9011 Guiding Principles for Verification of Analytical Methods for Veterinary Traditional Chinese Medicine Quality Standards

AWS - American Welding Society, The purpose of standard verification

• QC1-QC2-1986 AWS STANDARDS AND GUIDE FOR QUALIFICATION AND CERTIFICATION OF WELDING INSPECTORS

国家质量监督检验检疫总局, The purpose of standard verification

• SN/T 4663-2016 Verification rules for textile professional physical testing method standards

European Telecommunications Standards Institute (ETSI), The purpose of standard verification

• ETSI ETR 125-1994 Introduction to OSI Directory Functional Standards

US-FCR, The purpose of standard verification

• FCR FED H-08-9-CONTENTS-1990 PLANNING CRITERIA FOR VA FACILITIES TABLE OF CONTENTS

BE-NBN, The purpose of standard verification

• NBN-EN 45011-1989 General criteria for certification bodies operating product certification
• NBN-EN 45012-1989 General criteria for certification bodies operating quality system certification

RO-ASRO, The purpose of standard verification

• STAS SR EN 45013-1993 General criteria for certification bodies operating certification of personnel
• STAS SR EN 45011-1993 General criteria for certification bodies operating product certification
• STAS SR EN 45012-1993 General criteria for certification bodies operating quality system certification

GOSTR, The purpose of standard verification

• GOST ISO Guide 31-2019 Reference materials. Contents of certificates, labels and accompanying documentation

Lithuanian Standards Office , The purpose of standard verification

• LST EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
• LST EN 16214-3-2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes

International Telecommunication Union (ITU), The purpose of standard verification

• ITU-T H.350.5 FRENCH-2003 Directory services architecture for non-standard protocols Architecture des services d'annuaire pour les syst鑝es ?protocole non standard
• ITU-R SM.1875 FRENCH-2010 DVB-T coverage measurements and verification of planning criteria Mesures de la couverture DVB-T et v閞ification des crit鑢es de planification

Canadian Standards Association (CSA), The purpose of standard verification

• CSA DIR.016-96-1996 List of Products CSA Verified for Energy Efficiency

American Society of Mechanical Engineers (ASME), The purpose of standard verification

• ASME V V 20-2009(R2021) Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
• ASME VV 10.1-2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics
• ASME QRO-1-1994 Standard for the qualification and certification of resource recovery facility operators

YU-JUS, The purpose of standard verification

• JUS C.H4.006-1994 Tested round steel link chains - Marking; test certificate

KR-KS, The purpose of standard verification

• KS M ISO 18898-2021 Rubber — Calibration and verification of hardness testers

CZ-CSN, The purpose of standard verification

• CSN 46 6105-1989 Breeding aims and standards of inland cattle breeds

VN-TCVN, The purpose of standard verification

• TCVN 5959-1995 General criteria for certification bodies of personnel

NO-SN, The purpose of standard verification

• NS 3417-1994 Standard form for the owner's surety bond

NL-NEN, The purpose of standard verification

• NEN 2890-1990 Derivation of target sizes from modular sizes of building elements

AT-ON, The purpose of standard verification

• ONORM EN 45013-1990 General criteria for certification bodies operating certification of personnel

Group Standards of the People's Republic of China, The purpose of standard verification

• T/CRSUD 002-2002 Evaluation criteria of world-class tourist destinations

Others:   Validation of standard methods, Verification purpose, Standard guide for specification, design, validation of pharmaceutical and biopharmaceutical production systems and equipment, Validation of non-national standard methods, Validation of the new standard, The purpose of standard verification, standard verification method, Method of Standard Verification, Verification of communication standards, Standard guide for selection of device dimensions and sample dimensions for design validation of intravascular devices, Validation against standards, Standard Method Validation for Instruments, Standard practice for verification and classification of extensometer systems, Verification of reference materials, standard verification, What are the verification methods for non-standard methods?, Validation tests for standard methods, Standard guide for device size and sample size selection for design validation of intravascular devices, Validation analysis of reference materials, Standard guide for design verification device dimensions and sample size selection.