ZH
RU
ES

Principle of steam instrument

Principle of steam instrument, Total:252 items.

In the international standard classification, Principle of steam instrument involves: Products of the chemical industry, Paint ingredients, Crude petroleum, Fuels, Burners. Boilers, Nuclear energy engineering, Energy and heat transfer engineering in general, Installations in buildings, Air quality, Petroleum, petroleum products and natural gas handling equipment, Astronomy. Geodesy. Geography, Soil quality. Pedology, Wastes, Technical drawings, Road vehicle systems, Gas and steam turbines. Steam engines, Water quality, Power stations in general, Powder metallurgy, Petroleum products in general, Processes of the textile industry, General methods of tests and analysis for food products, Internal combustion engines for road vehicles, Pumps, Leather technology, Rubber, Products of the textile industry, Footwear, Iron and steel products, Extraction and processing of petroleum and natural gas, Analytical chemistry, Sterilization and disinfection, Linear and angular measurements, Vocabularies, Thermodynamics and temperature measurements, Surface treatment and coating, Applications of information technology, Character sets and information coding, Environmental testing, Non-destructive testing, Equipment for petroleum and natural gas industries, Electronic tubes, Medical sciences and health care facilities in general, Metrology and measurement in general, Optical equipment, Optics and optical measurements, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Construction industry, Road vehicles in general, Animal feeding stuffs, Mechanical testing, Environmental protection, Construction materials, Lubricants, industrial oils and related products, Particle size analysis. Sieving, Electrical engineering in general, Floor treatment appliances, Miscellaneous domestic and commercial equipment.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of steam instrument

GB 4469-1984 Test method for the reduction speed of vat dyes－Steam process
GB/T 4469-1984 Test method for the reduction speed of vat dyes--Steam process
GB/T 4469-2006 Vat dyes.Determination of the reduction speed.Steam process
GB/T 11059-1989 Crude oil--Determination of saturated vapour pressure--Reference method
GB/T 12712-2023 Technical management requirements for condensate recovery and steam traps in steam heating systems
GB/T 12712-1991 The requirements for supervision of recovery of condensate from steam heating system and technique of automatic steam traps
GB/T 17280-2009 Standard test method for distillation of crude petroleum.15-Theoretical plate column
GB 8785-1988 Diagnostic criteria and principles of management of occupational solvent gasoline poisoning

ES-AENOR, Principle of steam instrument

UNE 21-310 Pt.3-1990

CZ-CSN, Principle of steam instrument

CSN ON 49 0816-1968 Security prescriptions for thermal treatment o? logs ans semi-products by boiling and steaming
CSN 42 0284-1969 Instructions for treatment of carbon steel grades 11, 12 and casting of carbon steel grade 26 for constructions of steam boilers and other pressure vessels and steam pipings
CSN 42 0285-1969 Instructions for treatment of alloy steel grades 13, 15 and casting of alloy steel grades 27 and 28 for constructions of steam boilers and other pressure vessels and steam piping
CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices

RU-GOST R, Principle of steam instrument

GOST 33361-2015 Crude oil. Determination of vapor pressure by expansion method
GOST R 52340-2005 Crude oil. Determination of vapour pressure with expansion method
GOST 24277-1991 Stationary steam turbines for nuclear power plants. General specifications
GOST R 57420-2017 Heat recovery steam generators. Equipment storage, handling and preservation conditions
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 29016-1991 Vitreous and porcelain enamels. Apparatus for testing with acid and neutral liquids and their vapours
GOST 8.601-2010 State system for ensuring the uniformity of measurements. Saturated vapours pressure of petroleum and petroleum products. Measurement procedure
GOST R 53183-2008 Foodstuffs. Determination of trace elements. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
GOST R ISO 11140-4-2006 Sterilization of care products.Chemical indicators. Part 4. Class 2 indicators for steam penetration test packs
GOST R ISO 11140-3-2007 Sterilization of care products. Chemical indicators. Part 3. Class 2 indicators for steam penetration test sheets
GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods

Association Francaise de Normalisation, Principle of steam instrument

NF EN ISO 23131:2022 Ellipsométrie - Principes
NF V03-082*NF EN 13806:2003 Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
NF E18-014:1988 Industrial thermometers. Temperature recorders. Vapor pressure, liquid-expansion or bimetallic themometers.
NF A91-311*NF ISO 22779:2007 Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods.
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF EN 12921-1/IN1:2010 Machines de nettoyage et de pré-traitement de pièces industrielles utilisant des liquides ou des vapeurs - Partie 1 : prescriptions générales de sécurité
NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
NF C42-723:1996 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041 : particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes.
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF X31-081-2*NF EN 16175-2:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 2 : cold-vapour atomic fluorescence spectrometry (CV-AFS)
NF X31-081-1*NF EN 16175-1:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 1: cold-vapour atomic absorption spectrometry (CV-AAS)
NF EN 16175-1:2016 Boues, bio-déchets traités et sols - Détermination du mercure - Partie 1 : spectrométrie d'absorption atomique de vapeur froide (SAA-VP)
NF EN 16175-2:2016 Boues, bio-déchets traités et sols - Détermination du mercure - Partie 2 : spectrométrie de fluorescence atomique en vapeur froide (SFA-VP)
NF EN 835:1995 Répartiteurs de frais de chauffage pour enregistrer les valeurs de consommation de surfaces de corps de chauffe - Appareils sans alimentation en énergie électrique en vertu du principe d'évaporation

German Institute for Standardization, Principle of steam instrument

DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
DIN EN 13806:2002 Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion; German version EN 13806:2002
DIN 58951-2:2003 Sterilization - Steam sterilizers for laboratory use - Part 2: Apparatus requirements, requirements on services and installation
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
DIN 4312:1983 Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines
DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013); German version EN 62321-4:2014
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements; German version EN 12921-1:2005+A1:2010
DIN EN 16175-1:2016-12 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS); German version EN 16175-1:2016
DIN EN 16175-2:2016-12 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS); German version EN 16175-2:2016

RO-ASRO, Principle of steam instrument

STAS 7068-1983 STEAMING OF BEECH AND SAWNTIMBER AND STRIPS
STAS SR 8965-2-1995 Water and steam from the boiler installations Copper content determination. Atomic absorption spectrometrical method
STAS 7045-1991 Chemical protection of steamed beech sawn timber against lignicol fungl laying
STAS 6472/4-1989 Builing pnysics Hcat cngincerings HESPONSE OF STRUCTURAI. ELEMENTS TO WATER VAPOUR UIFFUSION Calculation specifications

Shanghai Provincial Standard of the People's Republic of China, Principle of steam instrument

DB31/T 223-1999 Operational supervising of steam heating system
DB31/ 529-1992 Operation management specification for steam boiler room
DB31/ 41-1990 Operation management standard for steam boiler room
DB31/ 176-2010 Safety, environmental protection and economic operation management of steam boiler room
DB31/ 176-2002 Safety, environmental protection and economic operation management of steam boiler room
DB31/ 176-1996 Management standards for safety, environmental protection and economical operation of steam boiler rooms
DB31/ 26-1990 Energy-saving operation management regulations for steam curing pits for concrete products

International Electrotechnical Commission (IEC), Principle of steam instrument

IEC 60231F:1977 General principles of nuclear reactor instrumentation. Sixth supplement: Heavy-water-moderated reactor with steam generating direct-cycle turbine

PL-PKN, Principle of steam instrument

PN M34315-1990 Steam and water boilersPrinciples of receptions after assembly
PN C04621-1988 Water and waste water Sampling Sampling water and steam from power plants and pipes for physical and chemical analysis

Professional Standard - Nuclear Industry, Principle of steam instrument

EJ/T 885-1994 Principles of Plugging of Heat Transfer Tubes in PWR Steam Generators

Association of German Mechanical Engineers, Principle of steam instrument

VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals

American Society for Testing and Materials (ASTM), Principle of steam instrument

ASTM D2892-11a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-03 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-03a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-01 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-99a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-18 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-11 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-13 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-05 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-10 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM B935-20 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
ASTM B935-16 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
ASTM D2892-15 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-17a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-18a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-16 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-17 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-19 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-20 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D6377-20 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
ASTM D7975-22 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C) (Manual Expansion Field Method)
ASTM B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
ASTM B935-05(2009)e1 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D7622-10e1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D8323-20 Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems

ES-UNE, Principle of steam instrument

UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
UNE-EN 16175-2:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) (Endorsed by AENOR in December of 2016.)
UNE-EN 16175-1:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) (Endorsed by AENOR in December of 2016.)
UNE-EN 15876-1:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) (Endorsed by AENOR in December of 2016.)

HU-MSZT, Principle of steam instrument

International Organization for Standardization (ISO), Principle of steam instrument

ISO/TS 16727:2013 Soil quality.Determination of mercury.Cold vapour atomic fluorescence spectrometry (CVAFS)
ISO 22779:2006 Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods
ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 23821:2022 Cosmetics — Analytical methods — Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO/TS 17665-3:2013 Sterilization of health care products - Moist heat - Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization

YU-JUS, Principle of steam instrument

JUS M.E2.063-1997 Boiler plants - Limited supervision of the steam boiler of the eroup IV
JUS M.E5.100-1980 Heat exchangers. Verification of thermal balance of water-fed or steam-fed primary circuits. Principles and test requirements
JUS M.E2.021-1990 Steam boilers. Uniform treatment of technical documentation.Colection of indentity papers

IT-UNI, Principle of steam instrument

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of steam instrument

GB/T 17280-2017 Standard test method for distillation of crude petroleum—15-theoretical plate column

Group Standards of the People's Republic of China, Principle of steam instrument

T/GIEHA 043-2022 Organic solid waste steam cracking carbonization treatment equipment
T/CEC 250-2019 Guidelines for benchmarking management of energy consumption indicators for gas-steam combined cycle generator sets
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

Society of Automotive Engineers (SAE), Principle of steam instrument

SAE J647-2010 Automotive Transmissions Schematic Diagrams

IN-BIS, Principle of steam instrument

British Standards Institution (BSI), Principle of steam instrument

BS 2486:1997 Recommendations for treatment of water for steam boilers and water heaters
BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
BS 903-A18:1973 Physical testing of rubber - Determination of equilibrium water vapour absorption
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
BS EN 16175-1:2016 Sludge, treated biowaste and soil. Determination of mercury - Cold-vapour atomic absorption spectrometry (CV-AAS)
BS EN 16175-2:2016 Sludge, treated biowaste and soil. Determination of mercury - Cold-vapour atomic fluorescence spectrometry (CV-AFS)
BS EN 835:1995 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle
BS EN 31092:1993+A1:2012 Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS EN 31092+A1:1994 Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

Henan Provincial Standard of the People's Republic of China, Principle of steam instrument

DB41/T 2350-2022 Management specification for safe operation of steam pipelines in power plants

Korean Agency for Technology and Standards (KATS), Principle of steam instrument

KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS K ISO 105-E11:2014 Textiles — Tests for colour fastness — Part E11: Colour fastness to steaming
KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
KS R 1122-2014 Measuring principles relating to piston ring of internal combustionengine for automobiles
KS M ISO 17229:2020 Leather — Physical and mechanical tests —Determination of water vapour absorption
KS C IEC 60231D-2012(2022) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS R 1122-1999(2009) Measuring principles relating to piston ring of internal combustionengine for automobiles
KS M ISO 14268-2013(2018) Leather ㅡ Physical and mechanical tests ㅡ Determination of water vapour permeability
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS K ISO 11092:2018 Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

SAE - SAE International, Principle of steam instrument

SAE R-140-1994 BY THE NUMBERS Principles of Automotive Parts Management
SAE R-361-2005 Automotive Software Engineering Principles@ Processes@ Methods@ and Tools
SAE R-395-2011 Principles of Vibration Analysis With Applications in Automotive Engineering

Japanese Industrial Standards Committee (JISC), Principle of steam instrument

JIS K 2258-1:2009 Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 1: Reid method
JIS K 2258-2:2009 Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 2: Triple expansion method

European Committee for Standardization (CEN), Principle of steam instrument

EN 13806:2002 Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
PD CEN/TS 16175-2:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
prEN ISO 14268:2021 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2021)
EN ISO 17229:2002 Leather - Physical and mechanical tests - Determination of water vapour absorption ISO 17229:2002
prEN 31092-1992 Textiles; determination of physiological properties; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded; hotplate test) (ISO/DIS 11092)
EN ISO 23821:2022 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)
EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
EN 772-15:2000 Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units
EN 16175-1:2016 Sludge@ treated biowaste and soil - Determination of mercury Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)
EN 16175-2:2016 Sludge@ treated biowaste and soil - Determination of mercury in aqua regia and nitric acid digests - Part 2: Cold vapour atomic fluorescence spectrometry (CVAFS)
PD CEN/TS 16175-1:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principle of steam instrument

ASHRAE LV-11-C014-2011 Dew Point Evaporative Cooling: Technology Review and Fundamentals

Indonesia Standards, Principle of steam instrument

SNI 06-6992.2-2004 Sediment - Part 2: Test methods of mercury (Hg) with cold vapour by mercury analyzer
SNI ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability
SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 19-6964.2-2003 Seawater quality - Part 2: Test methods of mercury (Hg) with cold vapour by atomic absorption spectrophotometers (AAS) or mercury analyzers

API - American Petroleum Institute, Principle of steam instrument

API RP 556-1997 Instrumentation and Control Systems for Fired Heaters and Steam Generators (First Edition)
API RP 550 P4-1984 Manual on Installation of Refinery Instruments and Control Systems Part IV - Steam Generators
API RP 550 P4-1975 Manual on Installation of Refinery Instruments and Control Systems Part IV - Steam Generators (FIRST EDITION)
API PUBL 4552-1994 Treatment of Gasoline-Contaminated Groundwater Through Surface Application Part II - A Prototype Field Investigation

SE-SIS, Principle of steam instrument

SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

United States Navy, Principle of steam instrument

NAVY QPL-18916-9-1984 GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-DTL-22050 E-2004 GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES
NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

KR-KS, Principle of steam instrument

KS M ISO 17229-2020 Leather — Physical and mechanical tests —Determination of water vapour absorption
KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS K ISO 11092-2018 Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

CU-NC, Principle of steam instrument

NC 19-02-33-1984 Occupational Hygiene and Safety Standards System. Hot Water and Steam Boilers. Requirements for Water Level Indicators
NC 63-07-1988 Car Industry. Air Filter Paper Elements. Main Dimensions
NC 07-23-1985 Machine Elements for Movement Transmission. Hydraulic Cylinders. General Quality Specifications
NC 19-31-1988 Occupational Hygiene and Safety Standards System. Liquid and Steam Boilers with Heat-Bearing Organic Agents. Requirements According to the Heating Methods
NC 07-26-1986 Machine Elements for Movement Transmission Roll Axes for Crawler Equipment. General Quality Specifications

Professional Standard - Petroleum, Principle of steam instrument

SY/T 6311-1997 The technical requirements of steamflooding three-dimensional scaled physical modelling experiment
SY/T 7068-2016 The technical requirements of two-dimensional scaled physical modeling experiment for steam recovery
SY/T 6118-2013 The technical specifications for water processing system operation of thermal recovery steam generator
SY/T 6118-1995 Technical specification for operation of steam generator water treatment system for thermal oil recovery
SY/T 0097-2000 Design specification for heavy oil field produced water treatment as steam generator feedwater
SY/T 6311-2012 The technical requirements of high temperature & high pressure three-dimensional scaled physical modeling experiment for steam recovery
SY 6311-2012 Technical requirements for high temperature and high pressure three-dimensional proportional physical simulation experiment of steam injection oil recovery

Danish Standards Foundation, Principle of steam instrument

DS/EN ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability
DS/CEN/TS 16175-2:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
DS/EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
DS/EN 31092:1994 Textiles-Determination of physiological properties-Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test)
DS/EN 12921-1+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
DS/CEN/TS 16175-1:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)

VN-TCVN, Principle of steam instrument

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

ESDU - Engineering Sciences Data Unit, Principle of steam instrument

ESDU 89002 B-2003 Thermophysical properties of benzene: Part 1. The ideal gas and the saturated liquid and vapour.

Standard Association of Australia （SAA）, Principle of steam instrument

AS 2134.3:1994 Recommended practice for chemical analysis by atomic absorption spectrometry - Vapour generation atomic absorption spectrometry

Professional Standard - Environmental Protection, Principle of steam instrument

HJ/T 276-2006 Technical specifications for steam-based centralized treatment engineering on medical waste (on trial)
HJ 276-2021 Technical specification for high-temperature steam disinfection centralized treatment engineering of medical waste

Lithuanian Standards Office , Principle of steam instrument

LST EN ISO 14268:2013 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012)
LST EN 16277-2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
LST EN ISO 11092:2015 Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014)
LST EN 12921-1-2005+A1-2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

DE-VDA, Principle of steam instrument

VDA 5500-2015 Basic Principles for RFID Application in the Automotive Industry; Version 1.1
VDA 5500 V1.2-2015 Basic Principles for RFID Application in the Automotive Industry; Version 1.2

North Atlantic Treaty Organization Standards Agency, Principle of steam instrument

STANAG 2906-1998 ESSENTIAL PHYSICAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS OF FIELD TYPE HIGH PRESSURE STEAM STERILIZERS

AT-ON, Principle of steam instrument

OENORM EN ISO 14268:2021 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2021)
ONORM M 5924-1985 Heat cost distributors by evaporation of liquids; terms and definitions, requirements, testing, marking of conformity
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments
ONORM ISO 5666 Teil.1:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after digestion with permangana te-peroxodisulfa te

AENOR, Principle of steam instrument

UNE-EN ISO 14268:2013 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/FDIS 14268:2012)
UNE-EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
UNE-EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

Natural Gas Processor's Association (NGPA), Principle of steam instrument

GPA RR-73-1983 Heats of Mixing of Steam with N2, CO2, H2, CH4, and CO at High Temperatures and Pressures Using a New High Temperature Calorimeter

American Society of Mechanical Engineers (ASME), Principle of steam instrument

ASME PTC 19.11-1970 Instruments and apparatus - Part 11: Water and steam in the power cycle (puritiy and quality, leak detection and measurement)

NATO - North Atlantic Treaty Organization, Principle of steam instrument

STANAG 2906-1983 Essential Physical Requirements and Performance Characteristics of Field Type High Pressure Steam Sterilizers (ED 2 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int

Yunnan Provincial Standard of the People's Republic of China, Principle of steam instrument

DB53/T 1122-2022 Guidelines for emergency management of electric vehicle charging stations in expressway service areas in plateau mountainous areas

American Gas Association, Principle of steam instrument

AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

Professional Standard - Aviation, Principle of steam instrument

HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents

未注明发布机构, Principle of steam instrument

ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1

TH-TISI, Principle of steam instrument

TIS 2006-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-041: particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes

BE-NBN, Principle of steam instrument

NBN-EN 25613-1994 Motor and aviation-type fuels. Determination of knock characteristics. Motor method (ISO 5163: 1990)

VDI - Verein Deutscher Ingenieure, Principle of steam instrument

VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2009 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2019 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702

Underwriters Laboratories (UL), Principle of steam instrument

UL 61010A-2-041-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes First Edition