ZH

RU

ES

deodorized ozone

deodorized ozone, Total:282 items.

In the international standard classification, deodorized ozone involves: Water quality, Products of the textile industry, Rubber, Sensory analysis, Products of the chemical industry, Cargo equipment, Materials for aerospace construction, Analytical chemistry, Inorganic chemicals, Installations in buildings, Air quality, Vocabularies, Geology. Meteorology. Hydrology, Electrical wires and cables, Electricity. Magnetism. Electrical and magnetic measurements, Sterilization and disinfection, Insulating materials, Packaging materials and accessories, Materials and articles in contact with foodstuffs, Paper and board, Raw materials for rubber and plastics, Welding, brazing and soldering, Pipeline components and pipelines, Paints and varnishes, Rubber and plastics products, Measurement of fluid flow, Metrology and measurement in general, Protection against dangerous goods.


Canadian General Standards Board (CGSB), deodorized ozone

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., deodorized ozone

Underwriters Laboratories (UL), deodorized ozone

Professional Standard - Urban Construction, deodorized ozone

  • CJ/T 3028.2-1994 The measures of ozone concentration, output and specific energy consumption for ozone generator

Cooling Technology Institute, deodorized ozone

CZ-CSN, deodorized ozone

  • CSN 38 5549-1973 Determination of the odour capacity of fuel gases
  • CSN 62 1527-1986 Vulcanized rubber. Methods for determi- ning ozone resistance of vulcanized rub- ber under a static deformation

Indonesia Standards, deodorized ozone

U.S. Environmental Protection Agency (U.S. EPA), deodorized ozone

GB-REG, deodorized ozone

US-FCR, deodorized ozone

SAE - SAE International, deodorized ozone

British Standards Institution (BSI), deodorized ozone

  • BS ISO 17299-5:2014 Textiles. Determination of deodorant property. Metal-oxide semiconductor sensor method
  • BS ISO 17299-1:2014 Textiles. Determination of deodorant property. General principle
  • BS ISO 17299-2:2014 Textiles. Determination of deodorant property. Detector tube method
  • BS ISO 17299-4:2015 Textiles. Determination of deodorant property. Condensation sampling analysis
  • BS ISO 17299-3:2014 Textiles. Determination of deodorant property. Gas chromatography method
  • BS EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Off-flavour (taint)
  • BS ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
  • BS ISO 1431-3:2000 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • BS ISO 1431-3:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • BS EN ISO 15011-2:2003 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of emission rates of gases, except ozone
  • BS PD CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 2: Fatty food
  • BS PD CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
  • PD CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs — Calibration of the off-flavour test — Part 2: Fatty food
  • PD CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs — Calibration of the off-flavour test — Part 3: Dry food
  • BS ISO 6235:2016 Rubber, raw. Determination of block polystyrene content. Ozonolysis method
  • BS EN ISO 10960:2018 Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions
  • BS EN ISO 10960:1997 Rubber and plastic hoses - Assessment of ozone resistance under dynamic conditions
  • BS ISO 3011:1997 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions

(U.S.) Ford Automotive Standards, deodorized ozone

AT-ON, deodorized ozone

  • ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)
  • ONORM C 9435-1-1994 Testing of elastomers - Determination of resistance to ozone cracking - Static strain test
  • ONORM C 9435-2-1994 Testing of elastomers - Determination of resistance to ozone cracking - Dynamic stram test

Japanese Industrial Standards Committee (JISC), deodorized ozone

  • JIS K 6259-2:2015 Rubber, vulcanized or thermoplastic -- Determination of ozone resistance -- Part 2: Determination of the ozone concentration
  • JIS L 0890:2006 Test methods for colour fastness to ozone
  • JIS B 7957:2006 Continuous analyzers for ozone and oxidants in ambient air
  • JIS K 6259:1993 Testing methods of resistance to ozone cracking for vulcanized rubber
  • JIS K 6259:2004 Rubber, vulcanized or thermoplastics -- Determination of ozone resistance

Compressed Gas Association (U.S.), deodorized ozone

  • CGA P-34-2014 Safe handling of ozone-containing mixtures including the installation and operation of ozone-generating equipment

Danish Standards Foundation, deodorized ozone

  • DS/EN 1622:2006 Water quality – Determination of the threshold odour number (TON) and threshold flavour number (TFN)
  • DS/EN 15074:2006 Chemicals used for treatment of swimming pool water - Ozone
  • DS/EN 1278+NA:2010 Chemicals used for treatment of water intended for human consumption - Ozone
  • DS/EN ISO 10960:1997 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
  • DS/EN ISO 7326:2008 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
  • DS/ISO 7326:1986 Rubber and plastic hoses. Assessment of ozone resistance under static conditions
  • DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

German Institute for Standardization, deodorized ozone

  • DIN EN 1622:2006-10 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); German version EN 1622:2006
  • DIN 19627:2018-01 Ozone generation plants for water treatment / Note: This standard is part of the DVGW body of rules.
  • DIN 53509-2:1994 Testing of rubber - Determination of resistance to ozone cracking - Part 2: Reference method for determining ozone concentration in laboratory test chambers
  • DIN EN 15074:2015-02 Chemicals used for treatment of swimming pool water - Ozone; German version EN 15074:2014
  • DIN VDE 0472-805:1994 Testing of cables, wires and flexible cords; ozone resistance
  • DIN EN 1278:2010-08 Chemicals used for treatment of water intended for human consumption - Ozone; German version EN 1278:2010
  • DIN ISO 1431-3:2021-12 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)
  • DIN ISO 1431-3:2011 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000)
  • DIN ISO 13964:1999-12 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method (ISO 13964:1998)
  • DIN 53509-1:2001 Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions
  • DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
  • DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
  • DIN ISO 1431-3:2021 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)
  • DIN EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
  • DIN EN ISO 10960:2018-05 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017); German version EN ISO 10960:2018

API - American Petroleum Institute, deodorized ozone

  • API PUBL 4400-1984 Numerical Modeling of Ozone Population Exposure: Application to a Comparison of Alternative Ozone Standards (Withdrawn)
  • API DR75-1994 Development of Improved Methods to Measure Effective Doses of Ozone
  • API PUBL 4418-1985 Ozone and Its Possible Effects on Agricultural Crops (Withdrawn)
  • API PUBL 4568-1993 Preliminary Scope for a Gulf Coast Ozone Study
  • API PUBL 4417-1985 The Characterization of Ozone and Sulfur Dioxide Exposures Near Some United States National Forests
  • API PUBL 4563-1993 Assessment of Planned Northeast Ozone Transport Region Modeling Activities
  • API PUBL 4515-1990 Use of Reactivity Factors to Predict Ozone Impacts of Methanol Fuel
  • API 4058-1970 MECHANISMS FOR REMOVAL OF CARBON MONOXIDE FROM THE ATMOSPHERE

GM Daewoo, deodorized ozone

Society of Automotive Engineers (SAE), deodorized ozone

International Organization for Standardization (ISO), deodorized ozone

  • ISO 17299-5:2014 Textiles - Determination of deodorant property - Part 5: Metal-oxide semiconductor sensor method
  • ISO 17299-1:2014 Textiles - Determination of deodorant property - Part 1: General principle
  • ISO 17299-2:2014 Textiles - Determination of deodorant property - Part 2: Detector tube method
  • ISO 17299-3:2014 Textiles - Determination of deodorant property - Part 3: Gas chromatography method
  • ISO 1431-3:2000 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • ISO 17299-4:2015 Textiles - Determination of deodorant property - Part 4: Condensation sampling analysis
  • ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
  • ISO 6235:2016 Rubber, raw - Determination of block polystyrene content - Ozonolysis method
  • ISO 6235:1982 Rubber, raw; Determination of block polystyrene content; Ozonolysis method
  • ISO 6235:1995 Rubber, raw - Determination of block polystyrene content - Ozonolysis method
  • ISO 10313:1993 Ambient air; determination of the mass concentration of ozone; chemiluminescence method
  • ISO 1431-3:2017 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • ISO 7326:1991 Rubber and plastics hoses; assessment of ozone resistance under static conditions
  • ISO 10960:1994 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
  • ISO 7326:1984 Rubber and plastics hoses — Assessment of ozone resistance under static conditions
  • ISO 10960:2017 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
  • ISO 21793:2020 Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), dissolved bound nitrogen (DNb), total bound phosphorus (TPb) and dissolved boun
  • ISO 13964:1998 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method
  • ISO 3011:1975 Title missing - Legacy paper document
  • ISO 3011:1981 Rubber or plastics coated fabrics; Determination of resistance to ozone cracking under static conditions
  • ISO 3011:2021 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
  • ISO 10313:1993/CD Amd 1 Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method — Amendment 1
  • ISO 10313:1993/DAmd 1:2011 Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method — Amendment 1

American National Standards Institute (ANSI), deodorized ozone

American Society for Testing and Materials (ASTM), deodorized ozone

  • ASTM E1207-14 Standard Guide for Sensory Evaluation of Axillary Deodorancy
  • ASTM E1207-02 Standard Practice for The Sensory Evaluation of Axillary Deodorancy
  • ASTM E1207-09 Standard Practice for The Sensory Evaluation of Axillary Deodorancy
  • ASTM E1207-87(1997) Standard Practice for The Sensory Evaluation of Axillary Deodorancy
  • ASTM E1207-14(2022) Standard Guide for Sensory Evaluation of Axillary Deodorancy
  • ASTM D5110-98 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-22 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-22a Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM E1593-21 Standard Guide for Assessing the Efficacy of Consumer Products in Reducing the Perception of Malodor
  • ASTM D5011-92(1997)e1 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D1352-97 Standard Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable
  • ASTM D5011-92(2003) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D5011-17 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D2802-98 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
  • ASTM D5011-92(2009) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D1149-07 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
  • ASTM D1149-07(2012) Standard Test Methods for Rubber Deteriorationmdash;Cracking in an Ozone Controlled Environment
  • ASTM D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM D3156-96(2005) Standard Practice for Rubber8212;Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • ASTM D3156-96 Standard Practice for Rubber8212;Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • ASTM D3156-96(2021) Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • ASTM D3156-96(2016) Standard Practice for Rubber&x2014;Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • ASTM D2526-02 Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
  • ASTM D1149-16 Standard Test Methods for Rubber Deterioration&x2014;Cracking in an Ozone Controlled Environment
  • ASTM D2526-97 Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
  • ASTM D3395-99 Standard Test Methods for Rubber Deterioration-Dynamic Ozone Cracking in a Chamber
  • ASTM D1149-18 Standard Test Methods for Rubber Deterioration&x2014;Cracking in an Ozone Controlled Environment
  • ASTM D3156-96(2001) Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • ASTM D1149-78a Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
  • ASTM D1352-02 Standard Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable

NL-NEN, deodorized ozone

  • NEN 6495-1984 Water - Photometric determination of the ozone content
  • NEN 2045-1981 Air quality - The calibration of measuring methods for nitrogen monoxide, nitrogen dioxide and ozone by means of gas-phase titration

Association Francaise de Normalisation, deodorized ozone

  • NF EN 15074:2014 Produits chimiques utilisés pour le traitement de l'eau des piscines - Ozone
  • NF G39-299-1*NF ISO 17299-1:2014 Textiles - Determination of deodorant property - Part 1 : general principle
  • NF G39-299-2*NF ISO 17299-2:2014 Textiles - Determination of deodorant property - Part 2 : detector tube method
  • NF G37-112:1980 Fabrics coated with rubber or plastic-static ozone resistance test.
  • NF G39-299-3*NF ISO 17299-3:2014 Textiles - Determination of deodrant property - Part 3 : gas chromatography method
  • NF EN 1278:2010 Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Ozone
  • NF Q03-085-2*NF EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 : off-flavour (taint)
  • NF T46-019-3:2006 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3 : reference and alternative methods for determining the ozone concentration in laboratory test chambers.
  • NF T46-019-3*NF ISO 1431-3:2017 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3 : reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • NF ISO 1431-3:2017 Caoutchouc vulcanisé ou thermoplastique - Résistance au craquelage par l'ozone - Partie 3 : méthode de référence et autres méthodes pour la détermination de la concentration d'ozone dans les enceintes d'essai de laboratoire
  • NF T47-205:2008 Rubber and plastics hoses - Assessment of ozone resistance under static conditions.
  • NF T47-205:1993 Rubber and platics hoses. Assessment of ozone resistance under static conditions.
  • NF T47-205*NF EN ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
  • NF T47-218*NF EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
  • NF T43-023*NF ISO 6235:2016 Rubber, raw - Determination of block polystyrene content - Ozonolysis method
  • NF ISO 13964:1999 Qualité de l'air - Dosage de l'ozone dans l'air ambiant - Méthode photométrique dans l'ultraviolet.
  • NF ISO 6235:2016 Caoutchouc brut -Dosage du polystyrène séquencé - Méthode de l'ozonolyse
  • NF EN 12094-16:2003 Installations fixes de lutte contre l'incendie - Éléments constitutifs des installations d'extinction à gaz - Partie 16 : exigences et méthodes d'essai pour dispositifs odorisants pour installations à CO2 basse pression

IT-UNI, deodorized ozone

PL-PKN, deodorized ozone

  • PN Z04007-05-1986 Air purity protection Tests for ozone Determination of ozone in the ambient air (imision) by spectrophotometric method
  • PN C05015-1985 Rubber vulcanised Determination of resistance to ozone craking Static strein test

YU-JUS, deodorized ozone

American Welding Society (AWS), deodorized ozone

  • AWS LVOS-1983 Laboratory Validation of Ozone Sampling with Spill-Proof Impingers

GM North America, deodorized ozone

Korean Agency for Technology and Standards (KATS), deodorized ozone

  • KS K ISO 17299-1:2022 Textiles — Determination of deodorant property —Part 1: General principle
  • KS M 6790-2005(2010) Testing methods of resistance to ozone cracking for vulcanized rubber
  • KS K ISO 17299-2:2022 Textiles — Determination of deodorant property —Part 2: Detector tube method
  • KS M ISO 1431-3:2009 Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Part 3:Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • KS I ISO 15337:2017 Ambient air-Gas phase titration-Calibration of analysers for ozone
  • KS I ISO 15337:2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
  • KS M ISO 1431-3:2019 Rubber, vulcanized of thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • KS I ISO 10313:2005 Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
  • KS I ISO 10313-2005(2020) Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
  • KS M ISO 10960:2011 Rubber and plastics hoses-Assessment of ozone resistance under dynamic conditions
  • KS M ISO 10960:2022 Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions
  • KS M ISO 10960:2016 Rubber and plastics hoses-Assessment of ozone resistance under dynamic conditions
  • KS M ISO 7326:2018 Rubber and plastics hoses — Assessment of ozone resistance under static conditions
  • KS I ISO 13964-2014(2019) Air quality — Determination of ozone in ambient air — Ultraviolet photometric method
  • KS M ISO 10960-2016(2021) Rubber and plastics hoses-Assessment of ozone resistance under dynamic conditions
  • KS M ISO 7326:2008 Rubber and plastics hoses-Assessment of ozone resistance under static conditions
  • KS I ISO 13964:2004 Air quality-Determination of ozone in ambient air-Ultraviolet photometric method
  • KS I ISO 13964:2014 Air quality — Determination of ozone in ambient air — Ultraviolet photometric method
  • KS M ISO 3011:2012 Rubber- or plastics-coated fabrics-Determination of resistance to ozone cracking under static conditions

KR-KS, deodorized ozone

  • KS K ISO 17299-1-2022 Textiles — Determination of deodorant property —Part 1: General principle
  • KS K ISO 17299-2-2022 Textiles — Determination of deodorant property —Part 2: Detector tube method
  • KS K ISO 17299-3-2023 Textiles — Determination of deodorant property — Part 3: Gas chromatography method
  • KS I ISO 15337-2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
  • KS I ISO 15337-2017 Ambient air-Gas phase titration-Calibration of analysers for ozone
  • KS M ISO 1431-3-2019 Rubber, vulcanized of thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • KS K ISO 17299-4-2023 Textiles — Determination of deodorant property — Part 4: Condensation sampling analysis
  • KS M ISO 7326-2018 Rubber and plastics hoses — Assessment of ozone resistance under static conditions
  • KS M ISO 10960-2016 Rubber and plastics hoses-Assessment of ozone resistance under dynamic conditions
  • KS M ISO 10960-2022 Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions

Professional Standard - Chemical Industry, deodorized ozone

  • HG/T 5082-2016 Textile dyeing and finishing auxiliaries.Catalase.Determination of deoxidize effect
  • HG/T 2869-1997 Rubber and plastics hoses-Assessment of ozone resistance under static conditions
  • HG/T 2716-2008 Rubber-or plastics-coated fabrics.Determination of resistance to ozone cracking under static conditions
  • HG/T 2716-1995 Determination of static resistance to ozone cracking of rubber or plastic coated fabrics

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, deodorized ozone

  • GB/T 35804-2018 Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Test methods for determining the ozone concentration in laboratory test chambers

RU-GOST R, deodorized ozone

  • GOST 18301-1972 Drinking water. Methods of determination of ozone residual content
  • GOST R ISO 17299-3-2017 Textiles. Determination of deodorant properties. Part 3. Gas chromatography method
  • GOST R ISO 15337-2013 Ambient air. Gas phase titration. Calibration of analysers for ozone
  • GOST ISO 7326-2015 Rubber and plastics hoses. Determination of ozone resistance under static conditions
  • GOST R 8.924-2016 State system for ensuring the uniformity of measurements. Ozone analyzers. Verification procedure
  • GOST R 8.911-2016 State system for ensuring the uniformity of measurements. Ozone generators. Verification procedure

Group Standards of the People's Republic of China, deodorized ozone

  • T/CASME 56-2022 Kitchen faucet with ozone-killing function
  • T/CSTM 00453-2021 Determination of ozone-depleting substances content in coatings and related materials

(U.S.) Telecommunications Industries Association , deodorized ozone

TIA - Telecommunications Industry Association, deodorized ozone

American Water Works Association (AWWA), deodorized ozone

  • AWWA B304-2013 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, deodorized ozone

  • GB/T 19241-2003 Identification of saturated rubbers in unsaturated rubbers--By ozonolysis
  • GB/T 15438-1995 Ambient air--Determination of ozone--Ultraviolet photometric method
  • GB/T 15437-1995 Ambient air--Determination of ozone--Indigo disulphonate spectrophotometry
  • GB/T 18949-2003 Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions
  • GB/T 24134-2009 Rubber and plastics hoses.Assessment of ozone resistance under static conditions
  • GB 30000.29-2013 Rules for classification and labelling of chemicals.Part 29:Hazardous to the ozone layer

ZA-SANS, deodorized ozone

  • SANS 5876:2008 Ozone resistance of vulcanized rubbers (RAPRA-Hampden method)
  • SANS 5876:1976 Ozone resistance of vulcanized rubbers (RAPRA-Hampden method)
  • SANS 51278:2008 Chemicals used for treatment of water intended for human consumption - Ozone
  • SANS 11431-3:2003 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • SANS 13964:2004 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method

Professional Standard - Environmental Protection, deodorized ozone

  • HJ 590-2010 Ambient air.Determination of ozone.Ultraviolet photometric method
  • HJ 1225-2021 Automatic Determination of Ozone in Ambient Air by Chemiluminescence Method
  • HJ 504-2009 Ambient air.Determination of ozone.Indigo disulphonate spectrophotometry
  • HJ 590-2010(XG1-2018) Determination of ambient air ozone UV photometry "No. 1 Amendment"

Professional Standard - Meteorology, deodorized ozone

  • QX/T 172-2012 Observation method of total column ozone with Brewer spectrophotometer

Lithuanian Standards Office , deodorized ozone

  • LST EN 15074-2006 Chemicals used for treatment of swimming pool water - Ozone
  • LST EN 1278-2010 Chemicals used for treatment of water intended for human consumption - Ozone
  • LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • LST EN ISO 10960:2001 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994)
  • LST EN ISO 7326:2008 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2006)
  • LST ISO 13964:1999 Air quality. Determination of ozone in ambient air. Ultraviolet photometric method (ISO 13964:1998)

AENOR, deodorized ozone

  • UNE-EN 15074:2015 Chemicals used for treatment of swimming pool water - Ozone
  • UNE-EN 1278:2010 Chemicals used for treatment of water intended for human consumption - Ozone
  • UNE-ISO 15337:2010 Ambient air -- Gas phase titration -- Calibration of analysers for ozone
  • UNE 77232:1996 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF OZONE. CHEMILUMINESCENCE METHOD.
  • UNE 77221:2000 AIR QUALITY. DETERMINATION OF OZONE IN AMBIENT AIR. ULTRAVIOLET PHOTOMETRIC METHOD.
  • UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • UNE 53572:2014 Rubber. Determination of surface cracking of rubber articles exposed to the weather or ozone chamber
  • UNE-EN ISO 10960:1997 RUBBER AND PLASTICS HOSES. ASSESMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS. (ISO 10960:1994).

European Committee for Standardization (CEN), deodorized ozone

  • EN 15074:2014 Chemicals used for treatment of swimming pool water - Ozone
  • EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
  • EN 27326:1993 Rubber and Plastics Hoses - Assessment of Ozone Resistance Under Static Conditions (ISO 7326 : 1991)

Electronic Components, Assemblies and Materials Association, deodorized ozone

Professional Standard - Medicine, deodorized ozone

  • YY/T 1264-2015 Evaluation of materials of medical device subject to ozone sterilization

RO-ASRO, deodorized ozone

  • STAS SR ISO 10313:1995 Ambient air - Detennination of the mass concentration of ozon -Chemiluminescence method
  • STAS R 9449-1974 VULCANIZED RUBBER Determination of ozone cracking resistance under static conditions
  • STAS 9051/9-1986 FABRICS COATED WITH RUBBER OR PLASTICS Determination of resistance to ozone cracking under static conditions

PT-IPQ, deodorized ozone

  • NP EN 1278-2002 Chemicals used for treatment of water intended for human consumption Ozone

NATO - North Atlantic Treaty Organization, deodorized ozone

  • AMEPP-8-2005 MILITARY USE OF OZONE DEPLETING SUBSTANCES IN NATO (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For add

Canadian Standards Association (CSA), deodorized ozone

TR-TSE, deodorized ozone

  • TS 2680-1977 VULCANIZED RUBBERS - DETERMINATION OF RESISTANCE TO OZONE CRACKING UNDER STATIC CONDITIONS
  • TS 3259-1979 Fabrics Coated With Rubber Or Plastics - Determination Of Resistance To Ozone Cracking Under Sta?ic Conditions

ES-AENOR, deodorized ozone

ECMA - European Association for Standardizing Information and Communication Systems, deodorized ozone

  • TR 56-1991 INFORMATION TECHNOLOGY EQUIPMENT RECOMMENDED MEASURING METHOD FOR OZONE EMISSION

VN-TCVN, deodorized ozone

  • TCVN 7171-2002 Air quality.Determination of ozone in ambient air.Ultraviolet photometric method

Professional Standard - Agriculture, deodorized ozone

  • GB 9571-1988 Evaluation of the ozone resistance of rubber and plastic hoses under static conditions

JP-JARI, deodorized ozone

  • JRIS R 0149-2005 Rolling stock-Air hoses with good sunshine and ozone resisting properties

AWS - American Welding Society, deodorized ozone

  • LVOS-1983 Laboratory Validation of Ozone Sampling with Spill-Proof Impingers

ES-UNE, deodorized ozone

  • UNE-EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)

未注明发布机构, deodorized ozone

US-CFR-file, deodorized ozone

  • CFR 40-82.18-2014 Protection of Environment. Part82:Protection of stratospheric ozone. Section82.18:Availability of production in addition to baseline production allowances for class II controlled substances.

Standard Association of Australia (SAA), deodorized ozone

  • AS 1180.7F:1972 Methods of test for hose made from elastomeric materials - Resistance of lining and cover to ozone
  • AS 3580.6.1:2011
  • AS 3580.6.1:1990 Methods for sampling and analysis of ambient air - Determination of ozone - Direct-reading instrumental method

Association of German Mechanical Engineers, deodorized ozone

  • VDI 2310 Blatt 15-2001 Maximum immission values referring to human health - Maximum immission concentrations for ozone

IX-EU/EC, deodorized ozone

  • NO 2037/2000-2000 REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on substances that deplete the ozone layer (Repealed by EU NO 1005/2009)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved