ZH
RU
ES

Airtight desorption

Airtight desorption, Total:112 items.

In the international standard classification, Airtight desorption involves: Wastes, Air quality, Seals, glands, Environmental protection, Ferrous metals, Rubber, Power stations in general, Paint ingredients, Optics and optical measurements, Products of the textile industry, Pipeline components and pipelines, Elements of buildings, Fuels, Aerospace electric equipment and systems, Ceramics, Gas and steam turbines. Steam engines, Graphic technology, Protection against crime, Water quality, Road vehicles in general, Soil quality. Pedology, Raw materials for rubber and plastics, Valves, Electronic components in general, Analytical chemistry.

Group Standards of the People's Republic of China, Airtight desorption

T/SHDSGY 038-2022 Technical specification for activated carbon adsorption nitrogen desorption condensation recovery
T/CAEPI 62-2023 Technical requirement for solvent recovery unit by granular activated carbon adsorption - nitrogen desorption
T/CIECCPA 050-2023 Technical and equipment requirements for hydrolysis adsorption desulphurization of blast furnace gas
T/GAIA 014-2022 Determination of alcohols in workplace air—Thermal desorption gas chromatography mass spectrometry method
T/JMZJXH 003-2020 Determination of 16 Polycyclic Aromatic Hydrocarbons in the Smoke from Incense Burning —Thermal Desorption / Gas Chromatography-Mass Spectrometry

Professional Standard - Environmental Protection, Airtight desorption

HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method
HJ 734-2014 Stationary source emission.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption gas chromatography mass spectrometry method

Professional Standard - Machinery, Airtight desorption

JB/T 12391-2015 Specification for mechanical seal of FGD pump
JB/T 5227.4-1991 Gas Chromatograph Pipeline Accessories Sealing Gaskets

Professional Standard - Electricity, Airtight desorption

DL/T 2215-2021 Determination of acidic substances in the attachments of downstream equipment of flue gas denitrification
DL/T 2369-2021 Technical guidelines for sulfur trioxide removal from flue gas in thermal power plants Alkaline adsorption method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Airtight desorption

GB/T 39695-2020 Identification of volatile components of rubber fumes—Thermodesorption and gas chromatographic method with mass spectrometric detection
GB/T 33871-2017 Test method of total volatile organic compounds(TVOC), benzene and styrene in toner—Thermal desorption-chromatography
GB/T 42162-2022 Rubber, raw—Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography—Thermal desorption (dynamic headspace) method
GB/T 39560.8-2021 Determination of certain substances in electrical and electronic products—Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS)

Association of German Mechanical Engineers, Airtight desorption

VDI 2100 Blatt 3-2011 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption
VDI 2465 Blatt 2-1999 Measurement of soot (Ambient Air) - Thermographical determination of elemental carbon after thermal desorption of organic carbon
VDI 2465 Blatt 2-2016 Measurement of soot (ambient air) - Thermographic determination of elemental carbon after thermal desorption of organic carbon

Japanese Industrial Standards Committee (JISC), Airtight desorption

JIS K 5101-11-2:2004 Test methods for pigments -- Part 11: Density -- Section 2: Centrifugal degassing method

机械电子工业部, Airtight desorption

JB 5227.4-1991 Gas chromatograph pipe accessories sealing gasket

Liaoning Provincial Standard of the People's Republic of China, Airtight desorption

DB21/T 3071-2018 Determination of Volatile Organic Compounds in Ambient Air Passive Sampling/Thermal Desorption/Gas Chromatography-Mass Spectrometry

AENOR, Airtight desorption

UNE 81598/1M:1998 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF KETONES IN AIR. Charcoal tube/Solvent desorption/Gas chromatographic method.
UNE-EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 1: Pumped sampling. (ISO 16017-1:2000)
UNE-EN ISO 16017-2:2004 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003)

Professional Standard - Commodity Inspection, Airtight desorption

SN/T 4934-2017 Determination of Volatile Organic Compounds in Automotive Textiles by Thermal Desorption-Gas Chromatography-Mass Spectrometry

German Institute for Standardization, Airtight desorption

DIN 30658-1:1998 Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
DIN EN 45510-4-10:1999 Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NO<(Index)x>) plant; German version EN 45510-4-10:1999
DIN ISO 16000-6:2020 Indoor air - Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID (ISO/DIS 16000-6:2020); Text in German and English
DIN EN 16119:2020 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing; German and English version prEN 16119:2020

Taiwan Provincial Standard of the People's Republic of China, Airtight desorption

CNS 13971-1997 Method of test for air permeability performance of building curtain walls
CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
CNS 13971-2006 Method of test for air permeability performance of building curtain walls and skylights

ES-AENOR, Airtight desorption

UNE 81-582-1991 Air quality. Workplace atmospheres. Determination of chlorinated hydrocarbons in air
UNE 81-588-1991 Air quality. Worlplace atmospheres. Determination of vynil chloride in air
UNE 81-580-1992 Air quality. Workplace atmospherse. Determination of n-hexane and toluene. Passive samplers

Society of Automotive Engineers (SAE), Airtight desorption

SAE AS85049/81-2000 Connector accessories, electrical, seal plug, size 10, category 7 (MIL-C-38999 connectors)
SAE AS81511/15A-2020 ACCESSORY, SEALING CONTACT, PLUG, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING (SERIES 1 OR 2)
SAE AS85049/81-2006 CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-C-38999 CONNECTORS)
SAE AS85049/81B-2020 CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-DTL-38999 CONNECTORS)
SAE AS81511/14-2019 ACCESSORY, ADAPTER, STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING
SAE AS81511/16-2019 ACCESSORY, CAP, PROTECTIVE LOCKING, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING
SAE AS81511/17-2019 ACCESSORY, COVER, PROTECTIVE, PLUG CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING (SERIES 2)
SAE AS81511/18-2019 ACCESSORY, COVER, PROTECTIVE, RECEPTACLE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING (SERIES 1 OR 2)
SAE AS81511A-2021 Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting and Accessories, General Specification For
SAE AS85049/3-2006 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS85049/3D-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS5258-2004 Insulating Components, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For
SAE AS5258A-2021 Insulating Component, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For
SAE AS85049/5B-2016 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS85049/5D-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS85049/4E-2019 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, SET-UP, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)

SAE - SAE International, Airtight desorption

SAE AS85049/81A-2010 Connector accessories, electrical, seal plug, size 10, category 7 (MIL-C-38999 connectors)
SAE AS85049/81B-2016 CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-DTL-38999 CONNECTORS)
SAE AS5258-1998 Insulating Components@ Molded@ Electrical@ Heat Shrinkable@ Connector and Cable Accessory@ Sealing Strain Relief@ General Specification For
SAE AS85049/5A-A1-2010 Connector Accessories@ Electrical@ Backshell@ Cable Sealing@ Straight@ Step-Down@ Category 1A (For MIL-DTL-22992 Classes C@ J and R)
SAE AS81511-2014 Connectors@ Electrical@ Circular@ High Density@ Quick Disconnect@ Environment Resisting and Accessories@ General Specification For
SAE AS81511A-2016 Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting and Accessories, General Specification For
SAE AS85049/3B-2016 Connector Accessories@ Electrical@ Backshell@ Cable Sealing@ Straight@ Category 1A (for MIL-C-22992 Connectors@ Classes C@ J@ and R)
SAE AS85049/3A-2011 Connector Accessories@ Electrical@ Backshell@ Cable Sealing@ Straight@ Category 1A (for MIL-C-22992 Connectors@ Classes C@ J@ and R)
SAE AS85049/3-2000 Connector Accessories@ Electrical@ Backshell@ Cable Sealing@ Straight@ Category 1A (for MIL-C-22992 Connectors@ Classes C@ J@ and R)
SAE AS5258A-2012 Insulating Component, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For
SAE AS85049/3C-2018 CONNECTOR ACCESSORIES@ ELECTRICAL@ BACKSHELL@ CABLE SEALING@ STRAIGHT@ CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS@ CLASSES C@ J@ AND R)
SAE AS85049/5B-2011 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)

European Committee for Standardization (CEN), Airtight desorption

PD CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption
EN ISO 15009:2016 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons@ naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption

RU-GOST R, Airtight desorption

GOST R ISO 16200-1-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method
GOST R ISO 16200-2-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 2. Diffusive sampling method
GOST R ISO 16017-1-2007 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/cappilary gas chromatography. Part 1. Pumped sampling
GOST R ISO 16017-2-2007 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/cappilary gas chromatography. Part 2. Diffusive sampling
GOST R ISO 16000-6-2007 Indoor air. Part 6. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID

American Society for Testing and Materials (ASTM), Airtight desorption

ASTM D6196-23 Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
ASTM D6196-15 Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
ASTM D7339-12 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
ASTM D7823-16 adjunct Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry
ASTM D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &40;Vinyl Chloride&41; Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry

British Standards Institution (BSI), Airtight desorption

BS PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption
BS EN ISO 15009:2016 Tracked Changes. Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
BS EN 16119:2013 LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing

YU-JUS, Airtight desorption

JUS B.E4.341-1985 Laboratory glassware and accessories. Density hydrometers for liquefied petroleum gases

Korean Agency for Technology and Standards (KATS), Airtight desorption

KS I ISO 16000-6-2014(2019) Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS or MS/FID
KS I ISO 16200-2-2006(2017) Workplace air quality－Sampling and analysis of volatile organiccompounds by solvent desorption/gas chromatography－Part 2：Diffusive sampling method
KS I ISO 15680-2010(2015) Water quality－Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
KS M ISO 17052-2012(2017) Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method

International Organization for Standardization (ISO), Airtight desorption

ISO 16000-6:2021 Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
ISO/CD 12219-11 Interior air of road vehicles — Part 11: Thermal desorption analysis of organic emissions for the characterization of non-metallic material for vehicles
ISO/TS 17796:2013 Rubber - Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection

Professional Standard - Public Safety Standards, Airtight desorption

GA/T 2075.3-2023 Forensic sciences—Examination methods for common ignitable liquid and its residues—Part 3:Thermo desorption-GC/MS

Defense Logistics Agency, Airtight desorption

DLA MIL-DTL-28840/13 E-2009 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, COVER, RECEPTACLE
DLA MIL-DTL-28840/13 F-2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE
DLA MIL-DTL-28840/15 E-2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG
DLA MIL-DTL-28840/2 E-2009 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
DLA MIL-DTL-28840/3 E-2009 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
DLA MIL-DTL-28840/3 F-2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45°, OPEN, FOR ELECTRICAL CONNECTORS
DLA MIL-DTL-28840/2 F-2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90°, OPEN, FOR ELECTRICAL CONNECTORS
DLA MIL-DTL-28840/1 F-2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS

Danish Standards Foundation, Airtight desorption

DS/EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DS/EN ISO 15009:2013 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption
DS/EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
DS/EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption

Association Francaise de Normalisation, Airtight desorption

NF X31-426*NF EN ISO 15009:2016 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption
NF ISO 17052:2007 Caoutchouc brut - Détermination des monomères résiduels et autres composés volatils de masse moléculaire faible par chromatographie en phase gazeuse sur colonne capillaire - Méthode par désorption thermique (espace de tête dynamique)
NF T54-972:2004 Systèmes de canalisations en plastique pour la distribution de combustibles gazeux - Polyéthylène (PE) - Robinets - Plage angulaire d'étanchéité et spécifications dimensionnelles complémentaires

Lithuanian Standards Office , Airtight desorption

LST EN ISO 16017-2:2004 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003)
LST EN ISO 16017-1:2002 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
LST ISO 15009:2007 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption (ISO 15009:2002, identical)

United States Navy, Airtight desorption

NAVY QPL-81511-9 NOTICE 1-2009 Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, and Accessories, General Specification for
NAVY QPL-81511-QPD-2009 Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, and Accessories, General Specification for
NAVY QPL-81511-QPD-2012 Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, and Accessories, General Specification for

International Electrotechnical Commission (IEC), Airtight desorption

IEC 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)

(U.S.) Ford Automotive Standards, Airtight desorption

FORD WSK-M4G334-A2-2009 SEALER, VINYL, HEAT CURING, AIRLESS SPRAYABLE, SOLVENT RELEASE, PRIMER OVEN CURING***TO BE USED WITH FORD WSS-M99P1111-A***