ZH
RU
ES

Acceptance by sample

Acceptance by sample, Total:499 items.

In the international standard classification, Acceptance by sample involves: Quality, Electronic components in general, Refractories, Non-metalliferous minerals, Construction materials, Products of the chemical industry, Fuels, Raw materials for rubber and plastics, Thermodynamics and temperature measurements, Products of the textile industry, Electricity. Magnetism. Electrical and magnetic measurements, Leather technology, Food products in general, Prepackaged and prepared foods, General methods of tests and analysis for food products, Fruits. Vegetables, Cereals, pulses and derived products, Beverages, Meat, meat products and other animal produce, Microbiology, Animal feeding stuffs, Laboratory medicine, Aircraft and space vehicles in general, Headgear. Clothing accessories. Fastening of clothing, Milk and milk products, Paint ingredients, Sugar. Sugar products. Starch, Wastes, Plastics, Materials for the reinforcement of composites, Wood, sawlogs and sawn timber, Structures of buildings, Mathematics, Edible oils and fats. Oilseeds, Footwear, Particle size analysis. Sieving, Tea. Coffee. Cocoa, Surface treatment and coating, Analytical chemistry, Pulps, Galvanic cells and batteries, Soil quality. Pedology, Pesticides and other agrochemicals, Paper production processes, Photography, Testing of metals, Accident and disaster control, Non-textile floor coverings, Farming and forestry, Fluid power systems, Pumps, Coals, Clothes, Burners. Boilers, Power stations in general, Textile fibres, Tobacco, tobacco products and related equipment.

RU-GOST R, Acceptance by sample

GOST R ISO 18414-2008 Statistical methods. Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit reserve factor for product quality
GOST 8179-1998 Refractory products. Sampling and acceptance testing
GOST 8179-1985 Refractory products. Acceptance rules
GOST R ISO 2859-1-2007 Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
GOST 25983-1983 Chrysotile asbestos. Acceptance rules, sampling and preparation of samples
GOST 29289-1992 Wood chemical products. Rules of acceptance, sampling
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 24920-1981 Latexes synthetic. Acceptance rules, sampling and sample preparation
GOST 8844-1975 Knitted fabrics. Rules of acceptance and sampling method
GOST 18242-1972 Acceptance statistical inspection by attributes. Inspection plans
GOST R 52997-2008 Chrysotil. Acceptance rules, methods of sampling and preparation of samples for tests
GOST 938.0-1975 Leather. Rules of acceptance. Methods of sampling
GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
GOST 26313-2014 Fruit and vegetable products. Acceptance rules and methods of sampling
GOST 13586.3-1983 Grain. Acceptance rules and sampling methods
GOST R 51144-2009 Wine products. Acceptance rules and methods of sampling
GOST R 51144-1998 Products of wine industry. Acceptance rules and methods of sampling
GOST R 57233-2016 Microbiological products. Acceptance regulations and methods of sampling
GOST 28495-1990 Microbiological products. Acceptance regulations and methods of sampling
GOST 31730-2012 Wine products. Acceptance rules and methods of sampling
GOST R 50779.72-1999 Statistical methods. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
GOST 29188.0-1991 Perfumery and cosmetics. Acceptance rules, sampling and methods of organoleptic testing
GOST 28741-1990 Potato food products. Acceptance, sample preparation and test methods
GOST 16218.0-1993 Smallwares. Rules of acceptance and sampling method
GOST 5445-1979 Chemical products of coking. Acceptance regulations and methods of sampling
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST 16218.0-1982 Small wares. Method of sampling
GOST 29188.0-2014 Perfume and cosmetic products. Acceptance rules, sampling, organoleptic test methods
GOST R 50779.71-1999 Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
GOST 24660-1981 Acceptance statistical inspection by attributes based on economic characters
GOST 33957-2016 Dairy whey and drinks of its basis. Acceptance rules, sampling and methods of control
GOST R 50203.0-1992 Smallwares. Rules of acceptance and sampling
GOST R 50779.73-1999 Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures
GOST R ISO 2859-3-2009 Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures
GOST 22871-1977 Ground feldsparic and quartzfeldsparic materials. Rules of reception. Methods of sampling and sample preparation for testing
GOST 31339-2006 Fish, non-fish objects and products of their processing. Acceptance rules and sampling methods
GOST R ISO 3951-1-2015 Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by AQL for lot-by-lot inspection for a single quality characteristic and a single AQL
GOST 13341-1977 Dried vegetables. Rules of acceptance and sampling
GOST 24780-1981 Army shoes. Statistical methods of acceptance quality control by alternatives
GOST R ISO 3951-2-2015 Statistical methods. Sampling procedures for inspection by variables. Part 2. General specification for single sampling plans indexed by AQL for lot-by-lot inspection of independent quality characteristics
GOST R ISO 14560-2007 Statistical methods. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
GOST 31413-2010 Seaweeds, sea grasses and products of their processing. Acceptance rules and sampling methods
GOST 28570-1990 Concretes. Methods of strength evaluation on cores drilled from structures
GOST 26313-1984 Products of fruit and vegetable processing. Acceptance rules and methods of sampling
GOST 16493-1970 Product quality. Acceptance statistical inspection by attributes when the acceptable number of defectives in sample equals 0
GOST 12569-2016 Sugar. Acceptance rules and methods of sampling
GOST 12569-1999 Sugar. Acceptance rules and sampling methods
GOST R 50779.52-1995 Statistical methods. Acceptance sampling by attributes
GOST 1936-1985 Tea. Acceptance rules and methods of sampling
GOST R 54640-2011 Sugar. Acceptance rules and sampling methods
GOST 12569-1985 Granulated and refined sugar. Acceptance rules and sampling methods
GOST R ISO 2859-5-2009 Statistical methods. Sampling procedures for inspection by attributes. Part 5. System of sequential sampling plans indexed by AQL for lot-by-lot inspection
GOST 22370-1977 Mica crushed. Reception rules. Methods of sampling and sample preparation for laboratory testing
GOST 8756.0-1970 Canned food products. Sampling and preparation of samples for test
GOST 13586.3-2015 Grain. Acceptance rules and sampling methods
GOST 23785.0-2001 Cord fabric. Rules of acceptance and sampling method
GOST 7004-1993 Pulp. Sampling for testing
GOST 12786-1980 Beer. Acceptance rules and sampling methods
GOST R 50226-1992 Starch. Acceptance rules and methods of sampling
GOST 14839.0-1991 Commercial explosives. Acceptance rules and sampling
GOST 7004-1978 Cellulose. Acceptance rules. Sampling methods
GOST 23785.0-1979 Cord fabric. Rules of acceptance and sampling methods
GOST 26312.1-1984 Groats. Acceptance rules and methods of sampling
GOST R 57248-2016 Enzyme preparations. Rules of acceptance and methods of sampling
GOST R 50779.30-1995 Statistical methods. Acceptance sampling. General requirements
GOST R 50779.51-1995 Statistical methods. Continuous acceptance sampling by attributes
GOST R 52062-2003 Vegetable oils. Acceptance rules and methods of sampling
GOST 16489-1978 Wood pulp. Rules of acceptance. Sampling methods
GOST 25183.1-1982 Photographic gelatine. Acceptance rules and samples selection
GOST 27668-1988 Flour and bran. Acceptance and sampling methods
GOST 32190-2013 Vegetable oils. Acceptance rules and methods of sampling
GOST 7564-1997 Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
GOST 7564-1973 Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST R ISO/TR 8550-2-2008 Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 2. Sampling by attributes
GOST R ISO/TR 8550-3-2008 Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 3. Sampling by variables
GOST 29104.0-1991 Industrial fabrics. Industrial fabrics. Acceptance rulles and sampling method
GOST R 50843-1995 Commercial explosives. Acceptance rules and sampling
GOST 10852-1986 Oil seeds. Acceptance rules and sampling methods
GOST 22617.0-1977 Seeds of sugar beet. Acceptance rules and methods of sampling
GOST ISO 356-2014 Essential oils. Preparation of test samples
GOST 26809.1-2014 Milk and milk products. Acceptance regulations, methods of sampling and for testing. Part 1. Milk, dairy, milk compounds and milk-contained products
GOST R ISO 21247-2007 Statistical methods. Combined accept-zero systems and process control procedures for samling product
GOST 14618.0-1978 Essential oils, aromatics and their intermediates. Acceptance rules, sampling and methods of organoleptic tests
GOST 9173-1986 Knitted goods. Acceptance rules
GOST 12036-1985 Seeds of farm crops. Acceptance rules and methods of sampling
GOST 20576-1988 Natural sorted wool. Rules of acceptance and sampling methods

Danish Standards Foundation, Acceptance by sample

Standardpakke Stikproeveplaner 2-2008 Standards package - Acceptance sampling plans - Inspection by attributes
Standardpakke Stikproeveplaner 3-2008 Standards package - Acceptance sampling plans - Inspection by variables
DS/ISO 2859-1/Amd 1:2011 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
DS/ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
DS/ISO 2859-5:2006 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
DS/ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
DS/ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
DS/ISO 13448-2:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
DS/ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
DS 2184:1982 Sampling procedures and tables for inspection by attributes
DS/ISO 8422:2007 Sequential sampling plans for inspection by attributes
DS/ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS/ISO 8422:1992 Sequential sampling plans for inspection by attributes
DS/ISO 8422/Cor.1:1993 Sequential sampling plans for inspection by attributes-Technical Corrigendum 1
DS/ISO 2859-1+Cor.1:2001 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptable quality limit (AQL) for lot-by-lot inspection
DS/ISO 2859-3:2005 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
DS/EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
DS/ISO 3951-5:2007 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
DS/ISO 3951-1:2013 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
DS/EN 163:1992 Ceramic tiles. Sampling and basis for acceptance
DS/ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
DS/ISO 2859-1:1992 Sampling procedures for inspection by attributes. Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
DS/EN ISO 10545-1:1998 Ceramic tiles - Part 1: Sampling and basis for acceptance
Standardpakke Stikproeveplaner 1-2008 Standards package - Acceptance sampling plans - General guidance
Standardpakke Stikproeveplaner 4-2008 Standards package - Acceptance sampling plans - Bulk materials
DS/ISO 10725:2001 Acceptance sampling plans and procedures for the inspection of bulk materials.
DS/ISO 8423:1992 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
DS/ISO 2859-4:2003 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels

BELST, Acceptance by sample

STB GOST R 50779.51-2003 Statistical methods. Continuous acceptance sampling by attributes
STB 1384-2010 Products of wine industry. Asseptance rules and methods of sampling
STB 2397-2015 Confectionery. Acceptance rules, methods of sampling and sample preparation
STB 1939-2009 Vegetable oils. Acceptance rules and methods of sampling
STB 2160-2011 Bakery products. Acceptance procedures, sampling methods, definition methods organoleptic indicators and mass

AENOR, Acceptance by sample

UNE-ISO 2859-1:2012 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
UNE-ISO 2859-5:2014 Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
UNE-ISO 2859-3:2014 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures
UNE-EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
UNE-ISO 3951-1:2012 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
UNE-ISO 2859-2:2012 Sampling procedures for inspection by attributes. Parte 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection.
UNE-EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
UNE-ISO 2859-4:2013 Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels

German Institute for Standardization, Acceptance by sample

DIN ISO 2859-1:2014-08 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English
DIN ISO 28593:2019 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 28593:2017); Text in German and English
DIN ISO 18414:2012 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 18414:2006); Text in German and English
DIN ISO 28593:2019-02 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 28593:2017); Text in German and English
DIN EN 1434-4:2007 Heat meters - Part 4: Pattern approval tests English version of DIN EN 1434-4:2007-05
DIN ISO 2859-2:2021-07 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:2020)
DIN EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version EN 15413:2011
DIN ISO 2859-2:2020 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:2020); Text in German and English
DIN ISO 2859-2:2021 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:2020)
DIN ISO 3951-1:2023-10 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022); Text in German...
DIN 53235-2:2005 Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
DIN ISO 2859-3:2007-10 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005); Text in German, English
DIN ISO 2859-2:1993 Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985
DIN EN ISO 21646:2022-09 Solid recovered fuels - Sample preparation (ISO 21646:2022); German version EN ISO 21646:2022
DIN EN 1434-4:2016 Heat meters - Part 4: Pattern approval tests; German version EN 1434-4:2015
DIN EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006
DIN ISO 3951-1:2008 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2005); Text in German an
DIN 54389:2020-07 Solid recovered fuels - Obtaining representative laboratory samples from heterogeneous materials by bale sampling
DIN EN ISO 4519:2016-08 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980); German version EN ISO 4519:2016
DIN ISO 2859-1:2014 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English
DIN ISO 2859-1:2004 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 including Technical Corrigendum 1:2001)
DIN EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample; German version EN 15443:2011
DIN EN ISO 10545-1:1997 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995); German version EN ISO 10545-1:1997
DIN EN ISO 10545-1:2015-02 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014); German version EN ISO 10545-1:2014
DIN EN ISO 664:2008-11 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008
DIN ISO 3951-1:2016 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013); Text in German an
DIN EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980)

Association Francaise de Normalisation, Acceptance by sample

NF ISO 5538:2008 Lait et produits laitiers - Échantillonnage - Contrôle par attributs
NF X06-022-1*NF ISO 2859-1:2000 Sampling procedures for inspection by attributes - Part 1 : sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection.
NF B40-202:1982 Shaped refractory products. Sampling and acceptance testing.
NF X06-024*NF ISO 28591:2017 Sequential sampling plans for inspection by attributes
NF X06-022-5*NF ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5 : system of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection.
NF X06-120*NF ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
NF ISO 2859-5:2005 Règles d'échantillonnage pour les contrôles par attributs - Partie 5 : systèmes de plans d'échantillonnage progressif pour le contrôle lot par lot, indexés d'après la limite d'acceptation de qualité (LAQ)
NF X06-013-1*NF ISO 3951-1:2014 Sampling procedures for inspection by variables - Part 1 : Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
NF ISO 2859-3:2005 Règles d'échantillonnage pour les contrôles par attributs - Partie 3 : procédures d'échantillonnage successif partiel
NF EN ISO 4519:2016 Dépôts électrolytiques et finitions apparentées - Méthodes d'échantillonnage pour le contrôle par attributs
NF X34-229*NF EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
NF EN ISO 21646:2022 Combustibles solides de récupération - Préparation des échantillons
NF G08-011:1987 Textiles. Fibres, yarns, fabrics, clothes. Methods of sampling applicable to reception control of batches.
NF P21-399:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample.
NF V03-902:1995 Oilseeds. Reduction of laboratory sample to test sample.
NF X06-013-2*NF ISO 3951-2:2014 Sampling procedures for inspection by variables - Part 2 : general specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
NF X06-022:2000 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection
NF X06-022-2*NF ISO 2859-2:2021 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection
NF X31-114*NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
NF A91-155*NF EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
NF EN ISO 664:2008 Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai
FD X06-111*FD ISO 10725:2001 Acceptance sampling plans and procedures for the inspection of bulk materials
NF X06-120:2005 Combined accept-zero sampling systems and process control procedures for product acceptance.
NF ISO 28594:2017 Systèmes d'échantillonnage de tolérance zéro-défaut et procédures de maîtrise des processus combinés pour l'acceptation de produits
NF ISO 23909:2008 Qualité du sol - Préparation des échantillons de laboratoire à partir d'échantillons de grande taille
NF ISO 2859-2:2021 Règles d'échantillonnage pour les contrôles par attributs - Partie 2 : plans d'échantillonnage pour les contrôles de lots isolés, indexés d'après la qualité limite (QL)
NF P61-534-1*NF EN ISO 10545-1:2014 Ceramic tiles - Part 1 : sampling and basis for acceptance
NF P61-534:1997 Ceramic tiles. Part 1 : sampling and basis for acceptance.
NF X34-227*NF EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
NF X30-413:2006 Waste - Constitution of a sample of household waste contained in a waste collection vehicle.
NF X06-022-4*NF ISO 2859-4:2020 Sampling procedures for inspection by attributes - Part 4 : procedures for assessment of declared quality levels

ZA-SANS, Acceptance by sample

SANS 2859-1:2004 Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SANS 2859-5:2008 Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SANS 3951-3:2008 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SANS 3951-5:2008 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
SANS 3951-2:2008 Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
SANS 3951-1:2008 Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
SANS 5089:1977 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
SANS 2859-10:2008 Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes

International Organization for Standardization (ISO), Acceptance by sample

ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO 28593:2017 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
ISO 28598-2:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO 28597:2017 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO 5022:1979 Shaped refractory products; Sampling and acceptance testing
ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859:1974 Sampling procedures and tables for inspection by attributes
ISO/TS 20658:2017 Medical laboratories — Requirements for collection, transport, receipt, and handling of samples
ISO 3951-1:2013 Sampling procedures for inspection by variables.Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 3951-5:2006 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISO 2859:1974/Add 1:1977 Sampling procedures and tables for inspection by attributes — Addendum 1
ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
ISO 3951-2:2006 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
ISO 21646:2022 Solid recovered fuels — Sample preparation
ISO 3951-2:2013 Sampling procedures for inspection by variables. Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 2859-2:1985 Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
ISO 5089:1977 Textiles; Preparation of laboratory test samples and test specimens for chemical testing
ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 2859-4:2020 Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels
ISO/FDIS 3951-6:2023 Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
ISO 10545-1:2014 Ceramic tiles - Part 1: Sampling and basis for acceptance
ISO 10545-1:1995 Ceramic tiles - Part 1: Sampling and basis for acceptance

Korean Agency for Technology and Standards (KATS), Acceptance by sample

KS A ISO 18414:2008 Acceptance sampling procedures by attributes-Accept-zero sampling system based on credit principle for controlling outgoing quality
KS A ISO 18414:2015 Acceptance sampling procedures by attributes－Accept-zero sampling system based on credit principle for controlling outgoing quality
KS Q ISO 13448-2:2009 Acceptance sampling procedures based on the allocation of priorities principle(APP)-Part 2:Coordinated single sampling plans for acceptance sampling by attributes
KS Q ISO 13448-2:2016 Acceptance sampling procedures based on the allocation of priorities principle(APP)－Part 2：Coordinated single sampling plans for acceptance sampling by attributes
KS Q ISO 14560:2010 Acceptance sampling procedures by attributes-Specified quality levels in nonconforming items per million
KS Q ISO 14560:2016 Acceptance sampling procedures by attributes－Specified quality levels in nonconforming items per million
KS Q ISO 28598-2:2019 Acceptance sampling procedures based on the allocation of priorities principle(APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
KS Q ISO 3951-3-A:2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS F 2553-2017 Methods for samples of aggregate to testing size
KS Q ISO 28597:2020 Acceptance sampling procedures by attributes —Specified quality levels in nonconforming items per million
KS Q ISO 2859-5:2010 Sampling procedures for inspection by attributes-Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 2859-5:2014 Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 2859-1-2014(2019) Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS Q ISO 3951-5:2019 Sampling procedures for inspection by variables — Part 5:Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
KS A 3105-2002 SINGLE SAMPLING INSPECTION PLANS WITH SCREENING BY ATTRIBUTES
KS A 3106-2002 SAMPLING INSPECTION PLANS FOR CONTINUOUS PRODUCTION BY ATTRIBUTES
KS Q ISO 3951-1:2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
KS Q ISO 28590:2019 Sampling procedures for inspection by attributes —Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS Q ISO 2859-3-2014(2019) Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
KS P ISO TS 20658:2021 Medical laboratories — Requirements for collection, transport,receipt, and handling of samples
KS Q ISO 2859-5-2014(2019) Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS A ISO 3951-5:2008 Sampling procedures for inspection by variables-Part 5:Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS A ISO 3951-5:2013 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS A ISO 3951-2:2008 Sampling procedures for inspection by variables-Part 2:General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality characteristics
KS A ISO 3951-2:2013 Sampling procedures for inspection by variables－Part 2：General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality characteristics
KS Q ISO 10725:2009 Acceptance sampling plans and procedures for the inspection of bulk materials
KS Q ISO 10725:2016 Acceptance sampling plans and procedures for the inspection of bulk materials
KS A ISO 3951-1:2008 Sampling procedures for inspection by variables-Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
KS A ISO 3951-1:2013 Sampling procedures for inspection by variables-Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
KS A ISO 2859-0:2009 Sampling procedures for inspection by attributes－Part 0：Introduction to the KS A ISO 2859 attribute sampling system
KS Q ISO 8550-1-2012(2017) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
KS Q ISO 3951-2:2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char
KS A 3107-1972(2001) SEQUENTIAL SAMPLING INSPECTION PLANS HAVING DESIRED OPERATING CHARACTERISTICS BY ATTRIBUTES
KS Q ISO 8550-1-2012(2022) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
KS Q ISO 8550-1:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
KS Q ISO 28593:2019 Acceptance sampling procedures by attributes —Accept-zero sampling system based on credit principle for controlling outgoing quality
KS Q ISO 2859-1:2010 Sampling procedures for inspection by attributes-Part 1:Sampling plans indexed by acceptable quality level(AQL) for lot-by-lot inspection
KS Q ISO 2859-1:2014 Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
KS I ISO 23909:2009 Soil quality－Preparation of laboratory samples from large samples
KS Q ISO 2859-2-2014(2019) Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality(LQ) for isolated lot inspection
KS Q ISO 21247:2009 Combined accept-zero sampling systems and process control procedures for product acceptance
KS Q ISO 28594:2019 Combined accept-zero sampling systems and process control procedures for product acceptance
KS Q ISO 21247:2015 Combined accept-zero sampling systems and process control procedures for product acceptance
KS A 3102-2013 Single sampling inspection plans by attributes having desired operating characteristics
KS Q ISO 10725-2016(2021) Acceptance sampling plans and procedures for the inspection of bulk materials
KS Q ISO 3951-4-2014(2019) Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels

British Standards Institution (BSI), Acceptance by sample

BS ISO 28593:2017 Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
BS ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principles (APP) - Coordinated single sampling plans for acceptance sampling by attributes
BS ISO 28598-2:2017 Tracked Changes. Acceptance sampling procedures based on the allocation of priorities principle (APP). Coordinated single sampling plans for acceptance sampling by attributes
BS 6001-1:1999+A1:2011 Sampling procedures for inspection by attributes. Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS ISO 28597:2017 Tracked Changes. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS ISO 28590:2017 Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS 6002-4:2006 Sampling procedures for inspection by variables. Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
BS 6001-4:2005 Sampling procedures for inspection by attributes. System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
BS ISO 3951-2:2013 Sampling procedures for inspection by variables. General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS EN 15443:2011 Solid recovered fuels. Methods for the preparation of the laboratory sample
BS ISO 3951-1:2013 Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS EN ISO 21646:2022 Solid recovered fuels. Sample preparation
BS EN 14358:2006 Timber structures — Calculation of characteristic 5-percentile values and acceptance criteria for a sample
BS EN ISO 10545-1:1997 Ceramic tiles. Sampling and basis for acceptance
BS EN ISO 10545-1:2014 Ceramic tiles. Sampling and basis for acceptance
18/30328257 DC BS ISO 2859-2. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limited quality (LQ) for isolated lot inspection
PD ISO/TS 20658:2017 Medical laboratories. Requirements for collection, transport, receipt, and handling of samples
BS ISO 14560:2004 Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS 6001-5:2002 Sampling procedures for inspection by attributes - Procedures for assessment of declared quality levels
BS EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes. Sampling procedures for inspection by attributes
BS ISO 2859-4:2020 Sampling procedures for inspection by attributes - Procedures for assessment of declared quality levels
BS 6001-7:2001 Sampling procedures for inspection by attributes - Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS 5293-19:1991 Sampling and testing carbon black for use in the rubber industry - Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
BS 6434:1984 Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
BS EN ISO 5089:2016 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
21/30409828 DC BS ISO 28596. Sampling procedures for inspection by attributes. Two-stage sampling plans for auditing and for inspection under prior information
BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
BS 6001-7:2006 Acceptance sampling procedures for inspection by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
BS ISO 28596:2022 Sampling procedures for inspection by attributes. Two-stage sampling plans for auditing and for inspection under prior information
21/30395970 DC BS EN ISO 21646. Solid recovered fuels. Sample preparation
BS ISO 10725:2001 Acceptance sampling plans and procedures for the inspection of bulk materials
BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by attributes
BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by variables
BS ISO 3951-1:2022 Tracked Changes. Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS ISO 28594:2017 Tracked Changes. Combined accept-zero sampling systems and process control procedures for product acceptance

KR-KS, Acceptance by sample

KS Q ISO 13448-2-2016 Acceptance sampling procedures based on the allocation of priorities principle(APP)－Part 2：Coordinated single sampling plans for acceptance sampling by attributes
KS Q ISO 28598-2-2019 Acceptance sampling procedures based on the allocation of priorities principle(APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
KS Q ISO 3951-3-A-2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS Q ISO 3951-3-2012 Sampling procedures for inspection by variables－Part 3：Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS Q ISO 28597-2020 Acceptance sampling procedures by attributes —Specified quality levels in nonconforming items per million
KS A ISO 3951-5-2008 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS Q ISO 3951-5-2019 Sampling procedures for inspection by variables — Part 5:Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
KS Q ISO 3951-1-2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
KS Q ISO 28590-2019 Sampling procedures for inspection by attributes —Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS P ISO TS 20658-2021 Medical laboratories — Requirements for collection, transport,receipt, and handling of samples
KS Q 0001-2013(2023) Single sampling inspection plans by variables and attributes
KS Q ISO 2859-10-2014 Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
KS Q ISO 3951-2-2019 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality char
KS Q ISO 28593-2019 Acceptance sampling procedures by attributes —Accept-zero sampling system based on credit principle for controlling outgoing quality
KS A ISO 3951-2-2008 Sampling procedures for inspection by variables－Part 2：General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality charact
KS Q ISO 21247-2015 Combined accept-zero sampling systems and process control procedures for product acceptance
KS Q ISO 28594-2019 Combined accept-zero sampling systems and process control procedures for product acceptance
KS Q ISO 10725-2016 Acceptance sampling plans and procedures for the inspection of bulk materials

American National Standards Institute （ANSI), Acceptance by sample

ANSI/EIA 585:1991 Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
ANSI/EIA 584:1991 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
ANSI/ISO 21247:2007 Combined accept-zero sampling systems and process control procedures for product acceptance
ANSI/ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

GOSTR, Acceptance by sample

GOST R 50779.83-2018 Statistical methods. Acceptance sampling procedures by attributes. System zero acceptance on the basis of the quality reserve principle
GOST R ISO 28597-2020 Statistical methods. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
GOST 34125-2017 Dried fruits and vegetables. Acceptance rules, sampling and preparation of samples
GOST 5445-2020 Chemical products of coking. Acceptance regulations and methods of sampling
GOST 28570-2019 Concretes. Methods of strength determination on cores selected from structures
GOST 34110-2017 Frozen fruits, vegetables, mushrooms and derived products. Acceptance rules and methods of sampling
GOST 9792-1973 Sausage products and products of pork, mutton, beef and meat of other kinds of slaughter animals and poultry. Acceptance rules and sampling methods
GOST R 50779.70-2018 Statistical methods. Sampling procedures for inspection by attributes. Introduction to GOST R ISO 2859 series of standards

Lithuanian Standards Office , Acceptance by sample

LST ISO 2859-5:2006 Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection (identical ISO 2859-5:2005)
LST ISO 2859-1+AC1:2003 Sampling procedures for inspection by attributes. Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (idt ISO 2859-1:1999+ISO 2859-1:1999/Cor.1:2001)
LST ISO 2859-1+AC1:2003/A1:2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection - AMENDMENT 1 (ISO 2859-1:1999/Amd. 1:2011, identical)
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
LST 1613-2000 Fish and fishery products. Acceptance rules, sampling methods and preparation of test samples
LST ISO 5538:2004 Milk and milk products. Sampling. Inspection by attributes (idt ISO 5538:2004)
LST EN 15443-2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
LST ISO 2859-2:2003 Sampling procedures for inspection by attributes. Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (idt ISO 2859-2:1985)
LST ISO 8422:2007 Sequential sampling plans for inspection by attributes (ISO 8422:2006, identical)
LST 1538-1998 Confectionery. Acceptance, rules, methods of sampling and sample preparation
LST ISO 2859-3:2006 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (identical ISO 2859-3:2005)
LST EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
LST 1615-2000 Food products and food additives. Sampling and preparation of test samples for microbiological examinations
LST 1615/P-2020 Food products and food additives. Sampling and preparation of test samples for microbiological examinations

VN-TCVN, Acceptance by sample

TCVN 7790-1-2007 Sampling procedures for inspection by attributes.Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
TCVN 7790-5-2008 Sampling procedures for inspection by attributes.Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
TCVN 7190-2-2002 Refractories.Method for sampling.Part 2: Sampling and acceptance testing of shape products
TCVN 4443-2009 Statistical quality control.Sequential acceptance inspection by attributes
TCVN 4444-2009 Statistical quality control.Continuous acceptance inspection by attributes
TCVN 5072-1990 Fruit and vegetable products.Sampling and general principles on acceptance
TCVN 4442-2009 Statistical quality control.Acceptance inspection by attributes with acceptance number zero
TCVN 4445-2009 Statistical quality control.Acceptance inspection by attributes for lots small size
TCVN 5519-1991 Beer.Acceptance rules and methods of sampling
TCVN 6415-1-2005 Ceramic floor and wall tiles.Test methods.Part 1: Sampling and product acceptance
TCVN 1749-1986 Woven fabrics.Sampling for testing

TH-TISI, Acceptance by sample

TIS 465.1-2011 Sampling procedures for inspection by attributes.part 1: sampling schemes indexed by acceptance quality limit (aql) for lot-by-lot inspection
TIS 314-1979 Standard for sampling method and acceptance inspection of fasteners
TIS 2398.1-2008 Ceramic tiles.part 1: sampling and basis for acceptance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Acceptance by sample

GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2828.5-2011 Sampling procedures for inspection by attributes.Part 5 ： System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 10325-2012 Shaped refractory produts.Rule of acceptance,sampling and inspection
GB/T 10325-2001 Shaped refractory products--Sampling and acceptance testing
GB/T 10325-2012(英文版) "Shaped refractory products—Rule of acceptance,sampling and inspection"
GB/T 13393-2008 Guide to acceptance sampling inspection
GB/T 22555-2010 Acceptance sampling plans and procedures for the inspection of bulk materials
GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
GB/T 2828.2-2008 Inspection procedures by count sampling - part 2 : sampling plans for isolated lot inspection retrieved by limit quality LQ
GB/T 42060-2022 Medical laboratories—Requirements for collection, transport, receipt, and handling of samples
GB/T 619-1988 Chemical reagent--Regulations for sampling and acceptance
GB/T 10629-2009 Textiles.Preparation of laboratory test samples and test specimens for chemical testing
GB/T 10629-1989 Textiles--Proparation of laboratory test samples and test specimens for chemical testing
GB/T 23252-2009 Pneumatic fluid power.Cylinders.Final examination and acceptance criteria

European Committee for Standardization (CEN), Acceptance by sample

EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)
PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN 14358:2006 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
EN 163:1985 Ceramic Tiles: Sampling and Basis for Acceptance
EN 163:1991 Ceramic Tiles - Sampling and Basis for Acceptance
prEN ISO 21646:2020 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)

未注明发布机构, Acceptance by sample

BS 6002-3:2005(2011) Sampling procedures for inspection by variables — Part 3 : Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot - by - lot inspection
SAE ARP9013/4A-2018 Statistical Product Acceptance Requirements Using Continuous Sampling@ Skip-Lot Sampling@ or Methods for Special Cases

Electronic Components, Assemblies and Materials Association, Acceptance by sample

ECA TEP140-1974 Proposed Acceptance Sampling Procedures for Small Lots

CEN - European Committee for Standardization, Acceptance by sample

PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation
EN 14358:2016 Timber structures - Calculation and verification of characteristic values

NL-NEN, Acceptance by sample

NEN 2584-1986 Shaped refractory products - Sampling and acceptance testing
NEN 1960-1967 Testing of pulp. Sampling and preparation of sample

CZ-CSN, Acceptance by sample

CSN ISO 5022:1993 Shaped refractory products - Sampling and acceptance testing
CSN 01 0260-1988 Sampling inspection by attributes. Single sampling plans with acceptance number zero
CSN ISO 2859-2:1992 Sampling procedures for inspectio by attributes. Part 2: Sampling plans indexed by limited quality (LQ) for isolated lot inspection
CSN ISO 2859-1:1991 Sampling procedures for inspection by attributes Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
CSN 46 5732-1963 Peats and peat moulds. Sampling, testing and acceptance
CSN 73 0290-1987 Accuracy of geometrical parameters in building. Acceptance sampling

American Society for Testing and Materials (ASTM), Acceptance by sample

ASTM E2234-05 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL
ASTM E949-88(1996) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM E949-88(2004) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM D3493-04 Standard Test Method for Carbon Black8212;Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-04a Standard Test Method for Carbon Black8212;Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-03 Standard Test Method for Carbon Black8212;Oil Absorption Number of Compressed Sample
ASTM D3493-00a Standard Test Method for Carbon Black8212;Oil Absorption Number of Compressed Sample
ASTM E778-15 Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
ASTM E2234-09(2018) Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
ASTM E778-08 Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D3493-14 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-16 Standard Test Method for Carbon Black&x2014;Oil Absorption Number of Compressed Sample (COAN)
ASTM E2234-09(2013) Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
ASTM E2762-10(2014) Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
ASTM D5115-90(1996) Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
ASTM E775-87(1996) Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM E775-87(2008)e1 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM D3493-09 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
ASTM E775-15 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM C390-08(2019) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM E790-08 Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
ASTM E777-08 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D2234/D2234M-09a Standard Practice for Collection of a Gross Sample of Coal
ASTM D585-97 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D2234/D2234M-10 Standard Practice for Collection of a Gross Sample of Coal
ASTM D2234/D2234M-16 Standard Practice for Collection of a Gross Sample of Coal
ASTM D5192-99 Standard Practice for Collection of Coal Samples from Core
ASTM D5192-07 Standard Practice for Collection of Coal Samples from Core
ASTM D5192-09 Standard Practice for Collection of Coal Samples from Core

SAE - SAE International, Acceptance by sample

SAE EIA-585-2015 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots (Formerly TechAmerica EIA-585)
SAE EIA-585-1991 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots (Formerly TechAmerica EIA-585)
SAE ARP9013/2A-2018 Statistical Product Acceptance Requirements Using Attribute or Variable Lot Acceptance Sampling Plans
SAE ARP9013/1A-2018 Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods
SAE ARP9013/4A-2005 Statistical Product Acceptance Requirements Using Continuous Sampling@ Skip-Lot Sampling@ or Methods for Special Cases

Jilin Provincial Standard of the People's Republic of China, Acceptance by sample

DB22/T 351-2019 Sanitary microbiological sample collection and testing principles
DB22/T 1952-2013 Product quality inspection sampling sample management specification

PT-IPQ, Acceptance by sample

NP 317-1963
NP 855-1985
NP 3256-1988 Animal feeding stufs Sampling
NP 713-1986
NP 2922-1985
NP 2126-1986

US-FCR, Acceptance by sample

FCR NE-F-2-7T-1973 ACCEPTANCE SAMPLING PLANS

Society of Automotive Engineers (SAE), Acceptance by sample

SAE ARP9013/2-2005 Statistical Product Acceptance Requirements Using Attribute or Variable Lot Acceptance Sampling Plans
SAE ARP9013/1-2005 Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods
SAE ARP9013/4-2005 Statistical Product Acceptance Requirements Using Continuous Sampline, Skip-Lot Sampling, or Methods for Special Cases

Indonesia Standards, Acceptance by sample

SNI 08-0616-1989 Single sample inspection for bulk acceptance by variable
SNI ISO 3951-1:2016 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

Professional Standard - Textile, Acceptance by sample

FZ/T 20007-1993 Sampling plan for delivery acceptance inspection of combed and carded wool fabrics

Professional Standard - Ferrous Metallurgy, Acceptance by sample

YB/T 4016-1991 Method for acceptance of samples of refractory products for glass melting kilns

冶金工业部, Acceptance by sample

YB 4016-1991 Sampling and acceptance methods for refractory products for glass melting furnaces

RO-ASRO, Acceptance by sample

STAS R 3160/4-1989 Sampling procedures for irr.pection by attributes SAMPLING PLANS INDEXED BY LLMITING QUALITY (LQ) FOR ISOLATED LOT INSPECTION
STAS SR EN 163-1995 Ceramic tiles — Sampling and bases for acceptance
STAS 8820-1972 Statistical quality control ACCEPTANCE INSPECTION SAMPLING BY VARIABLES
SR ISO 5089:1996 Textiles - Preparation of laboratory test samples and test specimens for chemical testing

ES-UNE, Acceptance by sample

UNE-EN ISO 21646:2023 Solid recovered fuels - Sample preparation (ISO 21646:2022)
UNE-EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980)

BE-NBN, Acceptance by sample

NBN-EN 163-1992 Ceramic tiles - Sampling and basis for acceptance

AT-ON, Acceptance by sample

ONORM EN 163-1992 Ceramic tiles - Sampling and basis for acceptance
ONORM N 2505-1998 Milk and milk products - Guidance on sampling - Explanatory note to ?NORM EN ISO 707
OENORM EN ISO 21646:2021 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)

SE-SIS, Acceptance by sample

SIS SS-EN 163-1991 Ceramic tiles — Sampling and basis for acceptance

IN-BIS, Acceptance by sample

IS 13711-1993 Ceramic tiles. Sampling and basis for acceptance

Standard Association of Australia （SAA）, Acceptance by sample

AS ISO 20658:2019 Medical laboratories — Requirements for collection, transport, receipt, and handling of samples
AS 4459.1:1999 Methods of sampling and testing ceramic tiles - Sampling and basis for acceptance
AS ISO 10545.1:2020 Ceramic tiles, Method 1: Sampling and basis for acceptance
AS/NZS 2891.2.2:2014
AS 1012.13:1992/Amdt 1:1993

Taiwan Provincial Standard of the People's Republic of China, Acceptance by sample

CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size

Professional Standard - Electron, Acceptance by sample

SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity

Professional Standard - Chemical Industry, Acceptance by sample

HG/T 3921-2006 Chemical reagent.Regulations for sampling and acceptance
HG/T 3057-1989(1997) Carbon black Method of packing storing transporting sampling and acceptance

Professional Standard - Agriculture, Acceptance by sample

GB 619-1988 Chemical reagent sampling and acceptance rules

HU-MSZT, Acceptance by sample

Group Standards of the People's Republic of China, Acceptance by sample

T/XQGX 001-2022 Standards for the Administration of Battery Samples of Inspection and Testing Institutions Part 1: Receiving
T/MBJX 0002-2019 Permanent magnet (hard magnetic) material sampling and acceptance procedures

Japanese Industrial Standards Committee (JISC), Acceptance by sample

JIS Z 9015-1:2006 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

ECIA - Electronic Components Industry Association, Acceptance by sample

TEP140-1974 Proposed Acceptance Sampling Procedures for Small Lots

PL-PKN, Acceptance by sample

PN C81500-1974 Pain?s Sampling and preparation of laboratory sample
PN P55051-1990 Printed products Aceptance inspection

Guangdong Provincial Standard of the People's Republic of China, Acceptance by sample

DB44/T 1617-2015 Management specification for sending and receiving samples for inspection of measuring instruments

Military Standard of the People's Republic of China-General Armament Department, Acceptance by sample

GJB 4748-1997*GJBz 20358-1997 Inspection and acceptance procedures for finished military products

YU-JUS, Acceptance by sample

JUS U.B1.003-1990 Site identification of soil samples

ES-AENOR, Acceptance by sample

INTA 11 05 12 12 05 12

Professional Standard - Machinery, Acceptance by sample

JB/T 8687-2013 Sampling inspection for pump products

CU-NC, Acceptance by sample

NC 55-01-1985 Veterinary Services. Porcine Red Diseases. Sample Collection and Selection

Anhui Provincial Standard of the People's Republic of China, Acceptance by sample

DB34/T 4361-2022 Disposal Specifications for Backup Samples Qualified in Food Safety Sampling Inspection

IT-UNI, Acceptance by sample

UNI ISO 2859-4:2021 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels

Professional Standard - Electricity, Acceptance by sample

DL/T 665-1999 The acceptance standard of water and steam integrated sampling and on-line analysing unit
DL/T 665-2009 Inspection guide for water and steam integrated sampling and on-line analysing unit

Professional Standard - Tobacco, Acceptance by sample

YC/Z 445-2012 Guide to acceptance sampling inspection of packaging material for cigarette