ZH
RU
ES
cu and cu2
cu and cu2, Total:112 items.
In the international standard classification, cu and cu2 involves: Fasteners, Shipbuilding and marine structures in general, Installations in buildings, Products of non-ferrous metals, General methods of tests and analysis for food products, Air quality, Materials for aerospace construction, Water quality, Non-ferrous metals, Fuels, Ferrous metals, Iron and steel products.
NO-SN, cu and cu2
- NS 16010-1989 Wrought copper and copper alloys - Copper for electrical purposes - Cu-ETP and Cu-FRHC
- NS 16011-1989 Wrought copper and copper alloys - Oxygenfree copper Cu-OF
- NS 16015-1989 Wrought copper and copper alloys - Phosphorous-deoxidized copper Cu-DHP
- NS 16013-1989 Wrought copper and copper alloys - Fire-refined tough pitch copper Cu-FRTP
Danish Standards Foundation, cu and cu2
- DS/EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
- DS/EN ISO 16582:2003 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt
- DS/EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
- DS/EN 15297:2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
- DS/CEN/CR 10320:2004 Optical emission analysis of low alloy steels (routine method) - Method for determination of C, Si, S, P, Mn, Cr, Ni and Cu
未注明发布机构, cu and cu2
- BS EN ISO 16582:2002(2004) Open end blind rivets with break pull mandrel and protruding head — Cu / St or Cu / Br or Cu / SSt
- BS 3L 63:1971(2011) Specification for Tube ofaluminium - copper - magnesium - silicon - manganese alloy — (Solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
- BS 2L 77:1971(2011) Specification for Forging stock and forgings ofaluminium - copper - magnesium - silicon - manganese alloy — (Solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
- BS 2L 85:1971(2000) Specification for Forging stock, bars, extruded sections and forgings of aluminium - copper - silicon - magnesium alloy — (Solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
Association Francaise de Normalisation, cu and cu2
- NF E25-722*NF EN ISO 16582:2003 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt.
- NF E25-723*NF EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
- NF L14-720:1983 Copper alloy sheet and strip (cu-B-1) for aerospace construction.
- NF X43-307*NF EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
- NF EN 14385:2004 Émissions de sources fixes - Détermination de l'émission totale de As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI et V
- NF X34-123:2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn.
Lithuanian Standards Office , cu and cu2
- LST EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
- LST EN ISO 16582:2003 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
- LST EN 14385-2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
- LST EN 15297-2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
AENOR, cu and cu2
- UNE-EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
- UNE-EN ISO 16582:2003 Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
- UNE 64022:1970 MIXED FEEDS AND RAW MATERIALS. PREPARATION OF THE SAMPLE FOR THE ANALYSIS OF MINERALS: ZN, CO, CU, FE AND MO.
- UNE 38215:1992 ALUMINIUM AND ALUMINIUM ALLOYS FOR CASTING. GROUP: AL-CU. ALLOY L-2150 AL-4CU2NI MG.
- UNE-EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, cu and cu2
- GB/T 819.2-1997 Cross recessed countersunk flat head screws (common head style)--Grade A--Part 2: Steel of property class 8.8, stainless and non-ferrous metals
German Institute for Standardization, cu and cu2
- DIN EN ISO 16583:2003-04 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002
- DIN EN ISO 16582:2003-04 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002
- DIN EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German version EN 14385:2004
U.S. Military Regulations and Norms, cu and cu2
ES-AENOR, cu and cu2
RO-ASRO, cu and cu2
- STAS 11144/2-1978 ENAMELLED HOUND COPPER WIRES Enamelled wires with a temperature index of 155,type Cu-ET-155 and Cu-TEs-155
- STAS 11144/4-1978 ENAMELLLED BOUND COPPER WIRES Self fluxing enamelled wires, type Cu-ES-105 and Cu-ES-130
- STAS 11144/5-1983 ENAMELLED ROUND COPPER WIRES Heat bonding self-fluxing enamelled wires, type Cu-ESA-105 and Cu-ESA-130
Society of Automotive Engineers (SAE), cu and cu2
- SAE AMS4003F-1991 ALUMINUM SHEET AND PLATE 0.12 Cu (1100-H14) Strain Hardened
- SAE AMS4097-2002 Aluminum Alloy, Sheet and Plate 4.5 Cu - 1.5 Mg - 0.60 Mn (2024-T36) Width 48 In. and Under
- SAE AMS4077A-1967 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4 Cu - 1.5Mg - 0.60Mn (Alclad One Side 2024-O)
- SAE AMS4099-2002 Aluminum Alloy, Sheet and Plate 4.5 Cu - 1.5 Mg - 0.60 Mn (2024-T36) Width Over 60 In.
- SAE AMS4131C-1996 Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6 Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged (UNS A97075)
- SAE AMS4631E-1989 (Noncurrent)Aluminum Bronze Rods, Bars, and Forgings 90.5 Cu - 7.5 Al - 1.95: Stress Relieved R(1999)
- SAE AMS4458-2010 Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked and Artificially Aged
- SAE AMS4458B-2022 Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged
- SAE AMS4098-2002 Aluminum Alloy, Sheet and Plate 4.5 Cu - 1.5 Mg - 0.60 Mn (2024-T36) Width Over 48 to 60 In., Incl.
- SAE AMS4356A-2022 Aluminum Alloy Seamless Drawn Round Tubing 2.3 Cu – 8.0 Zn – 2.0 Mg - 0.16 Zr (7155-T76) Solution Heat Treated and Aged
- SAE AMS4482-2017 Cast Aluminum Alloy Composite 4.6 Cu – 3.4Ti – 1.4B – 0.75Ag – 0.27Mg (A205.0/TiB2/3p-T7P) Sand Cast, Solution and Precipitation Heat Treated
SAE - SAE International, cu and cu2
- SAE AMS4001F-1986 ALUMINUM SHEET AND PLATE 0.12 Cu (1100-0) Annealed (UNS A91100)
- SAE AMS4003F-1986 ALUMINUM SHEET AND PLATE 0.12 Cu (1100-H14) Strain Hardened (UNS A91100)
- SAE AMS4631E-1988 Aluminum Bronze Rods@ Bars@ and Forgings 90.5 Cu - 7.5 Al - 1.95: Stress Relieved
- SAE AMS4003H-2007 Aluminum Alloy@ Sheet and Plate 0.12 Cu (1100-H14) Strain Hardened (UNS A91100)
- SAE AMS4222A-1947 Aluminum Alloy Castings@ Sand 4 Cu - 2.Ni - 1.5Mg (142-T77) Solution Treated and Overaged
- SAE AMS4863-2015 Copper-Nickel-Tin Alloy Castings Cu – 15Ni – 8Sn Hot Isostatically Pressed@ Solution Annealed and Spinodal Heat Treated (UNS C96900)
- SAE AMS4356-2016 Aluminum Alloy Seamless Drawn Round Tubing 2.3 Cu - 8.0 Zn - 2.0 Mg - 0.16 Zr (7155-T76) Solution Heat Treated and Aged
- SAE AMS4458A-2016 Aluminum Alloy@ Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated@ Cold Worked and Artificially Aged (UNS A92099)
- SAE AMS4413-2007 Aluminum Alloy@ Plate 3.5 Cu - 1.0Li - .40Mg - .35 Mn - .45Ag - 0.12Zr (2050-T84) Solution Heat Treated@ Stress Relieved@ and Artificially Aged (UNS A92050)
IT-UNI, cu and cu2
Professional Standard-Ships, cu and cu2
- CB 1298-1998 Technical requirements and inspection methods for Pb-Sn-Cu alloy antifriction coating
Group Standards of the People's Republic of China, cu and cu2
- T/ZS 0506-2023 PPR-Cu plastic coated copper composite pipes and fittings for drinking water and oxygen transportation
American Society for Testing and Materials (ASTM), cu and cu2
- ASTM B425-11 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
- ASTM B625-21 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, Cr-Ni-Fe-N Low-Carbon Alloy, Fe-Ni-Cr-Mo-Cu-N Alloy, and Ni-Fe-Cr-Mo-N Alloy Plate, Sheet, and Strip
Indonesia Standards, cu and cu2
PT-IPQ, cu and cu2
British Standards Institution (BSI), cu and cu2
- BS EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
- BS EN 14385:2004(2008) Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
- BS 7317-6:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of phosphorus and silicon by spectrophotometry
- BS L 103:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0. 8)
European Committee for Standardization (CEN), cu and cu2
- EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, TI and V
- prEN 14385 rev Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
American Society of Mechanical Engineers (ASME), cu and cu2
- ASME 2316-2001 25Cr-7Ni-3Mo-W-Cu-N Alloy, UNS S39274 Forgings, Seamless and Welded Pipe and Tube Section VIII, Division 1
Korean Agency for Technology and Standards (KATS), cu and cu2
- KS D ISO 19272:2018 Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
KR-KS, cu and cu2
- KS D ISO 19272-2018 Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)