ZH
RU
ES

iso7/1 pipe thread

iso7/1 pipe thread, Total:499 items.

In the international standard classification, iso7/1 pipe thread involves: Screw threads, Fasteners, Cutting tools, Linear and angular measurements, Tobacco, tobacco products and related equipment, Pipeline components and pipelines, Hand-held tools, Railway rolling stock, Road vehicle systems, Electrical accessories, Shipbuilding and marine structures in general, Aerospace fluid systems and components, Fluid storage devices, Industrial automation systems, Equipment for petroleum and natural gas industries, Products of non-ferrous metals, Installations in buildings, Automatic controls for household use, Fluid power systems, Optical equipment.

German Institute for Standardization, iso7/1 pipe thread

DIN 86121:2018-03 Screw caps - Pipe thread G 1 to G 6
DIN 431:2000 Pipe nuts with thread according to DIN ISO 228-1
DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 431:2013 Pipe nuts with thread according to DIN EN ISO 228-1
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 802-3:2016 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN 802-3:2008 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN EN 10241:2000 Steel threaded pipe; German version EN 10241:2000
DIN EN 10241:2000-08 Steel threaded pipe; German version EN 10241:2000
DIN EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
DIN 802-3:2016-03 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
DIN 431:2013-05 Pipe nuts with thread according to DIN EN ISO 228-1
DIN 76-2:1984 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN EN 10226-1:2004-10 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 86103:1996 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 86121:2018 Screw caps - Pipe thread G 1 to G 6
DIN 86121:1984 Screw caps; pipe thread G1 to G6
DIN 3852-11:1994 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 40430:1971-02 Steel Conduit Thread; Dimensions
DIN 2189:2008-11 Cold-forming taps for pipe threads G 1/16 to G 1 - Dimensions
DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN 513-1:2020 Metric buttress threads - Part 1: Thread profiles
DIN 802-3:1985 Tolerances on the threaded portion of taps; taps for pipe threads
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 13-1:1999 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 76-1:2016-08 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1 / Note: To be replaced by DIN 267-27 (2022-12).
DIN 513-1:2020-12 Metric buttress threads - Part 1: Thread profiles
DIN EN ISO 228-1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 3852-2:2000 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 976-1:2002 Stud bolts - Part 1: Metric thread
DIN EN 10242:1995 Threaded pipe fittings in malleable cast iron; German version EN 10242:1994
DIN EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN 14-3:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
DIN 14-4:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; limits
DIN ISO 68-1:2022-11 ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads (ISO 68-1:1998 + Amd.1:2020)
DIN 909:2012 Hexagon head pipe plugs.Conical thread

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, iso7/1 pipe thread

GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 22091.1-2008 Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Verification of paralled internal and taper external threads
GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
GB/T 14171-1993 Motor vehicles--Pneumatic braking systems--Tapped holes and male fittings
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 12716-2002 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads
GB/T 12716-2011 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
GB/T 14626-1993 Forged steel threaded pipe fittings
GB/T 20928-2007 Seamless inner grooved copper tube
GB/T 29537-2013 Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 27944-2011 Dryseal pipe threads with the thread angle of 60 degrees
GB/T 20928-2020(英文版) Seamless inner grooved copper tube
GB/T 19674.1-2005 Connection for general use and fluid power-Ports and stud ends with thread-Threaded port
GB/T 19674.1-2005 Connection for general use and fluid power-Ports and stud ends with thread-Threaded port
GB/T 22055.1-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 1:Screw thread type RMS(4/5in×1/36in)
GB/T 1414-2003 General purpose metric screw threads--The plan for pipe systems

SE-SIS, iso7/1 pipe thread

SIS SMS 300-1931
SIS SS 1257-1991 Fittings for piping — Intemally threaded long connections with pipe threads ISO 228- 1-G
SIS SS 1259-1991 Fittings forpiping — Internally threaded short connections with pipe threads ISO 228-1-G
SIS SS 1258-1991 Fittings for piping — Externally threaded short connections with pipe threads ISO 228- 1-G- or ISO 7- 1-R
SIS SMS-302-1931
SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
SIS SMS 36-1972 Parallel pipe threads
SIS SMS 295-1972 Taper pipe threads
SIS SS 2639-1987 Screwing dies - Taper pipe threads R
SIS SS 3225-1984 Threaded stainless steel pipe fittings - Unions with internal parallel pipe threads
SIS SS 3211-1984 Threaded stainless steel pipe fittings - Elbows 90° with internal parallel pipe threads
SIS SS 3217-1984 Threaded stainless steel pipe fittings - Nipples with external parallel pipe thread
SIS SS 3224-1984 Threaded stainless steel pipe fittings - Plugs with external taper pipe thread
SIS SS 3213-1984 Threaded stainless steel pipe fittings - Tees with internal parallel pipe threads
SIS SMS 327-1959
SIS SS 3215-1984 Threaded stainless steel pipe fittings - Socket reducers with internal parallel pipe threads
SIS SS 3214-1984 Threaded stainless steel pipe fittings - Sockets with internal parallel pipe thread
SIS SS 1108-1991 Fittings for piping — Straight nipples forPN 10 — Externally threaded
SIS SS 3221-1984 Threaded stainless steel pipe fittings — Bushings with internal parallel andexternal taper pipe threads
SIS SS-ISO 7/1:1985 Pipe threads where pressure-tight joints are made on the threads - Part 1: Desig- nation, dimensions and tolerances
SIS SS 3216-1984 Threaded stainless steel pipe fittings - Half sockets with internal parallel pipe thread
SIS SS 3223-1984 Threaded stainless steel pipe fittings - Hexagon caps with internal parallel pipe thread
SIS SS 3222-1984 Threaded stainless steel pipe fittings - Round caps with internal parallel pipe thread
SIS SS 3219-1984 Threaded stainless steel pipe fittings - Nipples for welding with external taper pipe thread
SIS SS 1109-1991 Fittings for piping — Elbow nipples for PN 10 — Externally threaded
SIS SMS 1708-1961
SIS SEN 24 10 21-1962 Conduit pipe threads. Gaugcs
SIS SS-ISO 228/1:1985 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Designation, dimensions and tolerances
SIS SS-ISO 5969:1987 Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion
SIS SS 3220-1984 Threaded stainless steel pipe fittings — Hexagon and octagonal nipples with external taper pipe threads
SIS SS 3212-1984 Threaded stainless steel pipe fittings - Bends 90° with external taper pipe threads and one socket
SIS SS 2637-1987 Handscrewing taps - Taper pipe threads Re
SIS SS 2638-1987 Screwing dies - Parallel pipe threads G

API - American Petroleum Institute, iso7/1 pipe thread

API SPEC 5B-1988 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS THIRTEENTH EDITION; SUPPLEMENT 1 - JULY 1990
API STD 5B-1985 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS ELEVENTH EDITION; (SUPPLEMENT 1 - MAY 1986)
API SPEC 5B-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION; Effective October 1@ 2008)
API SPEC 5B CHINESE-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION; Effective Date: October 1@ 2008)
API STD 5B-1971 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS (EIGHTH EDITION; SUPP 1: April 1972; SUPP 2: March 1973)
API SPEC 5B-2017 Threading@ Gauging@ and Inspection of Casing@ Tubing@ and Line Pipe Threads (SIXTEENTH EDITION; ERTA 1: June 2018)
API SPEC 5B KAZAKH-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION)
API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)
API STD 5B-1987 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS (ERRATA - MAY 1987)
API STD 5B-1968 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS (Seventh Edition; SUPP 1: April 1969; ERTA: August 1969; SUPP 2: April 1970)
API SPEC 5B-1996 Specification for Threading@ Gauging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (U.S. Customary Units) (FOURTEENTH EDITION)
API SPEC 5B RUSSIAN-2017 Threading@ Gauging@ and Inspection of Casing@ Tubing@ and Line Pipe Threads (SIXTEENTH EDITION)
API STD 5B-1979 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS (Tenth Edition; SUPP 3: April 1983)

CZ-CSN, iso7/1 pipe thread

CSN ON 22 3214-1968
CSN 25 4171-1963 Cylindrical thread "GO" gauges. Cylindrical pipe thread. Diameter G 1" - G 3 1/2"
CSN ON 22 3322-1963
CSN 25 4173-1963 Cylindrical thread "NOT GO" gauges. Cylindrical pipe thread. Diameter G 1" - G 3 1/2"
CSN 25 4180-1963 Ring limit thread "GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4050-1986 Screw gauges. Limit screw plug gauges. Cylindrical pipe thread diameter G 1/8 - G 3 1/2
CSN 25 4621-1960 Screw gauges. Screw pitch gauges for whitworth thread and pipe thread
CSN 22 3009-1983 Taps for cylindrical pipe thread. Thread tolerances
CSN 01 4033-1985 Cylindrícal pipe threads for gas tubes and screwed fittings
CSN 13 8281-1986 Locking nuts with pipe threads
CSN 25 4055-1986 Screw gauges. Solid GO screw ring gauges. Cylindrical pipe thread diameter G 1/8 - G 3 1/2
CSN 13 7673-1972 Mechanical engineering screwed pipe joints. Plugs with pipe thread
CSN 25 4185-1963 Limit ring thread "NOT GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4065-1986 Screw gauges. Solid NOT GO screw ring gauge. Cylindrical pipe thread diameter G 1/8 - G 3 1/2
CSN 01 4354-1966 Pipe threads for.gas list tubes and sc.rewed fittings - tolerance s
CSN 25 4181-1963 Reference gauges for new ring thread "GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4170-1963 Cylindrical limit thread gauges, bothsided. Cylindrical pipe thread. Diameter G 1/8" - G 7/8"
CSN 25 4172-1963 Measuring parts of "GO" limit of cylindrical thread gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4183-1963 Reference gauges on wearing for ring thread "GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4182-1963 Measuring parts of reference gauges for new ring thread "GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 13 7603-1972 Mechanical engineering scrowed pipe joints. Pipes, neck threads and atructural memberd.
CSN 25 4186-1963 Reference gauges for ring thread "NOT GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 13 7669-1972 Meclianioal engineering screwed pipe joinis. Locking nuts for adjustable con-nections with pipe thread
CSN 11 0451-1959
CSN 25 4140-1964 Cylindrical limit thread gauges, bothsided. Whitworth thread. Diameter W 1/8" - W 1 1/4"
CSN ON 45 1061-1964 Casing eylindrieal threade
CSN ON 11 1305-1966
CSN 13 7455-1960 Thread connection for gas hoses
CSN 25 4120-1954 Thread gauges. Limit screw ring gauges for go-side, diamater 1 up to 100 mm. Metric thread
CSN 13 7614-1972 Mechanical engineering screwed pipe joints. Sockets of solid angular pipo oonnections with connecting metric thread
CSN 25 4059-1986 Screw gauges. Wear check plug for solid and adjustable GO screw ring gauge. Cylindrical pipe thread diameter G 1/8 - G 3 1/2
CSN 13 7672-1972 Mechanical engineering screwed pipe joints.Plugs with metrie thread
CSN 25 4174-1963 Measuring parts of "NOT GO" limits of cylindrical thread gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 25 4020-1973 Screw gauges. Limit screw plug gauges. Metric screw thread diameter 1 mm to 100 mm
CSN 13 7615-1972 Mechanical ongineering screwed pipc joints. Sockets of solid angular pipe connections with connectíng pipo thread

American Society of Mechanical Engineers (ASME), iso7/1 pipe thread

USAS B2.1-1968 Pipe Threads (Except DryseaI)
ASME B16.14-1991 Ferrous pipe plugs, bushings, and locknuts with pipe threads
ASME B16.14-2010 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
ASME B1.20.3-1976 Dryseal pipe threads (inch)
ASME B1.20.1-1983 Pipe threads, general purpose (inch)
ASME B16.15-1985 Cast bronze threaded fittings
ASME B1.20.3-1976(R2018) Dryseal pipe threads (inch)
ASME B1.20.7-1991 Hose coupling screw threads (inch)
ASME B16.12-1991 Cast iron threaded drainage fittings
ASME B16.12-2009 Cast Iron Threaded Drainage Fittings
ASME B16.12-1998 Cast iron threaded drainage fittings
ASME B16.39-2019 Malleable Iron Threaded Pipe Unions
ASME B16.12-1983 Cast Iron Threaded Drainage Fittings
ASME B16.12-1977 Cast Iron Threaded Drainage Fittings
ASME B16.12-1971 Cast Iron Threaded Drainage Fittings
ASME B16.12-1965 Cast Iron Threaded Drainage Fittings

Standard Association of Australia （SAA）, iso7/1 pipe thread

AS 1722.1:1975 Pipe threads of Whitworth form Part 1: Sealing pipe threads (metric units)
AS 1722.2:1992 Pipe threads of Whitworth form - Fastening pipe threads

CH-SNV, iso7/1 pipe thread

SN 029 100-1983 This standard is a translation of the original bilingual (German/French) Swiss Standard
SN 258 405-1979 Die Angaben in dieser Norm entsprechen weitgehend den Fest-legungen der von der Internationalen Organisation für Nor-mung, ISO, herausgegebenen Internationalen Norm ISO 1829 ■ 1975. (Siehe Erl?uterungen.)
SNV 10130-1943
SN 213 163-1979
VSM 76160-1974
SN ISO 105/P02:1984
SN 640 758 c-1988

Professional Standard - Machinery, iso7/1 pipe thread

JB/T 8364.1-2010 Tools for taper pipe threads with 60°thread angle.Part 1:Circular screwing die for taper pipe threads with 60°thread angle
JB/T 10031-1999 Gauges for pipe threads where pressure-tight joints are made on the threads
JB/T 9995-1999 Taper tap for 55°straight pipe threads. Thread tolerance
JB/ZQ 4168-2006 Pipe thread - Blank dimension before cutting inner and outer thread
JB/T 8364.2-2010 Tools for taper pipe threads with 60°thread angle.Part 2:Taps for taper pipe threads with 60°thread angle
JB/T 8364.4-2010 Tools for taper pipe threads with 60°thread angle.Part 4:Thread rolling flat dies for taper pipe threads with 60°thread angle
JB/T 8364.5-2010 Tools for taper pipe threads with 60°thread angle.Part 5:Thread rolling cylindrical dies for taper pipe threads with 60°thread angle
JB/T 9994-1999 Taper tap for 55°straight pipe threads
JB/T 9996-1999 Taps for 55°taper pipe threads
JB/T 8364.2-1996 Taps for 60°taper pipe threads

Association Francaise de Normalisation, iso7/1 pipe thread

NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF EN 10226-1:2004 Filetages de tuyauterie pour raccordement avec étanchéité par le filetage - Partie 1: filetages extérieurs coniques et filetages intérieurs cylindriques - Dimensions, tolérances et désignation
NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
NF EN ISO 228-1:2003 Filetages de tuyauterie pour raccordement sans étanchéité dans le filet - Partie 1 : dimensions, tolérances et désignation
NF E03-165:1984 Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).
NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF E03-162:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.
NF E03-163:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.
NF A49-195*NF EN 10241:2001 Steel threaded pipe fittings
NF E29-684:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 26, taper 1/16 (3 degrees 34' ), 14 tpi npt.
NF E03-500/A1*NF ISO 1501/A1:2020 ISO miniature screw threads - Amendment 1 : the figure for the tolerance zone of external thread
NF ISO 1501/A1:2020 Filetages miniatures ISO - AMENDEMENT 1 : la figure pour la zone de tolérance du filetage extérieur
NF E66-101*NF ISO 5969:2002 Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.
NF ISO 68-1/A1:2020 Filetages ISO pour usages généraux - Profil de base - Partie 1 : filetages métriques - Amendement 1
NF EN 10226-2:2005 Filetages de tuyauteries pour raccordement avec étanchéité par le filetage - Partie 2 : filetages extérieurs coniques et filetages intérieurs coniques - Dimensions, tolérances et désignation
NF ISO 68-1:1999 Filetages ISO pour usages généraux - Profil de base - Partie 1 : filetages métriques.

Korean Agency for Technology and Standards (KATS), iso7/1 pipe thread

KS B 3275-2002(2012) CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 3275-1987 CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 0223-1986(2011) Screw Threads for Rigid Metal Conduits and Fittings
KS B 3274-2002(2012) CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B 3274-1987 CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B ISO 228-1:2007 Pipe threads where pressure－tight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS B 0222-2007(2017) Taper pipe threads
KS B 0222-1987 Taper pipe threads
KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
KS B 0221-2009(2019) Parallel pipe threads
KS B 0222-2007(2022) Taper pipe threads
KS B 0221-1984 Parallel pipe threads
KS R ISO 13486-1:2005 Road vehicles-Hydraulic braking systems-Part 1:Double-flare pipes, tapped holes, male fittings and tube seats
KS R ISO 13486-1:2015 Road vehicles－Hydraulic braking systems－Part 1：Double-flare pipes, tapped holes, male fittings and tube seats
KS B ISO 228-1-2007(2022) Pipe threads where pressure－tight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS R ISO 13486-1-2015(2020) Road vehicles－Hydraulic braking systems－Part 1：Double-flare pipes, tapped holes, male fittings and tube seats
KS B 5231-2009(2019) Gauges for taper pipe threads
KS W 1545-2013 Pipe threads where pressuretight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS W 1545-1999 Pipe threads where pressuretight joints are not made on the threads-Part 1:Dimensions, tolerances and designation
KS W 1545-1999(2009) Pipe threads where pressuretight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS D ISO 7598:2005 Stainless steel tubes suitable for screwing in accordance with ISO 7-1
KS D ISO 7598:2013 Stainless steel tubes suitable for screwing in accordance with ISO 7－1
KS B 5231-2009 Gauges for taper pipe threads
KS B 1533-2016 Screwed type steel pipe fittings
KS B 1533-2016(2021) Screwed type steel pipe fittings
KS B 1533-1992 Screwed type steel pipe fittings
KS B 1533-1987 Screwed type steel pipe fittings
KS R ISO 4039-1:2008 Road vehicles-Pneumatic braking systems-Part 1:Pipes, male fittings and tapped holes with facial sealing surface
KS B 5223-2001 Screw thread limit gauges for parallel pipe threads
KS D ISO 7598-2005(2010) Stainless steel tubes suitable for screwing in accordance with ISO 7－1
KS B ISO 6410-1-2014(2019) Technical drawings — Screw threads and threaded parts — Part 1: General conventions
KS V 7455-2005(2010) Steel pipe 100 K screwed unions for marine use
KS B ISO 49-2003(2008) Malleable cast iron fittings threaded to ISO 7－1
KS V 7455-1980 Steel pipe 100 K screwed unions for marine use

AT-ON, iso7/1 pipe thread

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs
ONORM ISO 228 Teil.2:1984 Pipe threads where pressure-tight joints are not made on the threads; Verification by means of limit gauges
ONORM ISO 7 Teil.1:1984 Pipe threads where pressure-tight joints are made on the threads; Designation, dimensions and tolerances
ONORM ISO 228 Teil.1:1982 Pipe threads where pressure-tight joints are not made on the threads; Designation, dimensions and tolerances

SAE - SAE International, iso7/1 pipe thread

SAE AS4861-1995 Bushing@ Pipe@ Internal and External Thread (FSC 4730; Should Be Used Instead of AN912 REV 9@ Which Was Cancelled on 8 February 1999)
SAE AS4861A-2003 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4854A-2003 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS15006A-2005 FITTING@ LUBRICATION@ HYDRAULIC@ LEAKPROOF@ 1/8 PIPE THREADS@ STEEL@ TYPE VI
SAE AS15006-2001 FITTING@ LUBRICATION@ HYDRAULIC@ LEAKPROOF@ 1/8 PIPE THREADS@ STEEL@ TYPE VI
SAE AS15006B-2007 FITTING@ LUBRICATION@ HYDRAULIC@ LEAKPROOF@ 1/8 PIPE THREADS@ STEEL@ TYPE VI
SAE AS15006C-2015 FITTING@ LUBRICATION@ HYDRAULIC@ LEAKPROOF@ 1/8 PIPE THREADS@ STEEL@ TYPE VI
SAE AS4309A-2006 Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
SAE AS4309D-2015 FITTING@ NIPPLE@ FLARED TUBE TO PIPE THREAD@ FOR SEAL RING
SAE AS21916D-2008 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
SAE AS21916-1998 Reducer@ External Thread@ Flareless Tube (FSC 4730)
SAE AS21916A-2001 Reducer@ External Thread@ Flareless Tube (FSC 4730; BEST COPY AVAILABLE)
SAE AS21916B-2003 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
SAE AS21916E-2016 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
SAE AS21916F-2016 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
SAE AS4863-1995 Plug@ Pipe@ External Thread (FSC 4730; Should Be Used Instead of MS20913G@ Which Was Cancelled on 28 September 1999)
SAE AS6475-2018 FITTING ASSEMBLY@ 90° ELBOW@ EXTERNAL SWAGE TO FEMALE FLARELESS@ HYDRAULIC
SAE AS4859-1995 Coupling@ Pipe@ Internal Thread

Society of Automotive Engineers (SAE), iso7/1 pipe thread

SAE AS4861A-2013 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861B-2016 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS896-1976 NIPPLE, FLARELESS TUBE TO MALE PIPE
SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS896B-2007 FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS896C-2015 FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS896D-2020 FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS4309C-2009 Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
SAE AS43025-1-1980 AS43025 Nut Union-Male (Steel)
SAE J476A-1961 Dryseal Pipe Threads
SAE J476-2013 Dryseal Pipe Threads
SAE AS4858-2002 CROSS, PIPE, INTERNAL THREAD
SAE J476-1961 Dryseal Pipe Threads
SAE AS4859A-2013 FITTING, COUPLING, PIPE, INTERNAL THREAD
SAE AS4858A-2013 FITTING, CROSS, PIPE, INTERNAL THREAD
SAE AS4860A-2013 FITTING, NIPPLE, PIPE, EXTERNAL THREAD
SAE AS4857A-2013 FITTING, TEE, PIPE, INTERNAL THREAD
SAE AS62351-1-1993 AS62351 Nut Union - Male (Cres)
SAE AS4863-2015 PLUG, PIPE, EXTERNAL THREAD
SAE AS4859-2002 COUPLING, PIPE, INTERNAL THREAD
SAE AS4860-2002 NIPPLE, PIPE, EXTERNAL THREAD
SAE AS4857-2002 TEE, PIPE, INTERNAL THREAD
SAE AS43095-1-1980 AS43095 Nut Union-Male (Aluminium Alloy)
SAE AS15006-2005 FITTING, LUBRICATION, HYDRAULIC, LEAKPROOF, 1/8 PIPE THREADS, STEEL, TYPE VI
SAE AS15006B-2014 FITTING, LUBRICATION, HYDRAULIC, LEAKPROOF, 1/8 PIPE THREADS, STEEL, TYPE VI
SAE AS4858A-2003 (R) Fitting, Cross, Pipe, Internal Thread
SAE AS21916C-2007 REDUCER, EXTERNAL THREAD, FLARELESS TUBE
SAE AS21916D-2015 REDUCER, EXTERNAL THREAD, FLARELESS TUBE
SAE AS4856A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL THREAD
SAE AS4860A-2003 (R) FITTING, NIPPLE, PIPE, EXTERNAL THREAD
SAE AS4856-2002 ELBOW, 90°, PIPE, INTERNAL THREAD

RO-ASRO, iso7/1 pipe thread

STAS 3508/2-1970 SCREW THREAD RUNOUT AND UNDERCUT Pipe thread
STAS 1112/15-1990 Screw cutting tools. Taps for pipe threads. Thread tolerances
STAS 1112/11-1990 Screw cutting tools. Taps for pipe threads. Dimensions
STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions
STAS 5560-1981 Steel threaded fittings SOCKETS
STAS 5020-1991 Theraded taper gauges for casing pipe threads checking up
STAS 1112/16-1980 TAPS FOR SEALED PROTECTIVE TUBE (IPE) THREAD Tolerances of screw thread
STAS 6936/9-1976 Threaded fittings for refrigerating plants TEES Dimensions
STAS 8956-1971 CIRCULAR SCREWING DIES FOR GAS-PIPE THREAD WITHOUT THREAD TIGHTENING Dimensions
STAS 5019-1988 Seamless steel pipes THKKADS FOR CAS1NG PIPES Dimcnsions
STAS 402-1988 PIPE TIIREADS WIIERE PRESSURE-TIGUT JOINTS ARE MADE ON TUE FHREADS Dimensions and tolerances
STAS 10835/3-1987 Pipe cylindrical threads where pressure tight joints are not made on the threads THREADED RING GAUGES Dimensions

International Organization for Standardization (ISO), iso7/1 pipe thread

ISO 228-1:1978 Title missing - Legacy paper document
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 228-1:1982 Pipe threads where pressure-tight joints are not made on the threads; Part 1 : Designation, dimensions and tolerances
ISO 228-1:1994 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7/1
ISO 13486-1:1999 Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 7-1:1994/cor 1:2007 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1
ISO 7598:1988 Stainless steel tubes suitable for screwing in accordance with ISO 7-1
ISO 4039-1:1998 Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface
ISO/R 1944:1970
ISO 7598:1982/Amd 1:1984 Stainless steel tubes suitable for screwing in accordance with ISO 7/1 — Amendment 1
ISO 5969:1979/cor 1:1991 Ground thread taps for pipe threads G series and Rp series; tolerances on the threaded portion; technical corrigendum 1
ISO 68-1:1998/Amd 1:2020 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads — Amendment 1
ISO 68-1:1998 ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads
ISO 4570-1:1977 Tyre valve threads; Part I; Threads 5V1, 5V2, 6V1 and 8V1

European Committee for Standardization (CEN), iso7/1 pipe thread

EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000
prEN 20049-1-1991 Malleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1
EN 10241:2000 Steel threaded pipe fittings
CEN EN 10241-2000 Steel Threaded Pipe Fittings
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation

Professional Standard - Tobacco, iso7/1 pipe thread

YC/T 230-2007 Pipe threads with 80 degree

Japanese Industrial Standards Committee (JISC), iso7/1 pipe thread

JIS B 0203:1982 Taper pipe threads
JIS B 0203:1999 Taper pipe threads
JIS B 0202:1982 Parallel pipe threads
JIS B 0204:1982 Screw threads for rigid metal conduits and fittings
JIS B 0202:1999 Parallel pipe threads
JIS B 2301 ERRATUM 1:2001 Screwed type malleable cast iron pipe fittings (Erratum 1)
JIS B 4645:1977 Die stock (oster type)
JIS B 2301 AMD 1:2001 Screwed type malleable cast iron pipe fittings (Amendment 1)
JIS B 0253:1985 Gauges for taper pipe threads
JIS B 0254:1985 Screw thread limit gauges for parallel pipe threads
JIS B 4446:1988 Hand taps for pipe threads for taper threads
JIS B 4445:1988 Hand taps for pipe threads for parallel threads

Professional Standard - Aerospace, iso7/1 pipe thread

QJ 562-1981 threaded casing
QJ 379-1978 1:16 straight shank tapered pipe thread bottom hole reamer (1″/16~2″)
QJ 1319.1-1987 Ordinary thread gauge thread ring gauge (d=1~100mm)
QJ 379-1989 Straight shank 1:16 taper pipe thread taper hole reamer (d=1"/16~2")
QJ 380-1989 Taper shank 1:16 taper pipe thread taper hole reamer (d=1"/16~2")
QJ 380-1978 Taper shank 1:16 taper pipe thread taper hole reamer (d=1"/16~2")
QJ 1318.1-1987 Ordinary thread gauge Integral thread plug gauge (d=1~6mm)

Danish Standards Foundation, iso7/1 pipe thread

DS/ISO 228/1:1983 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation, dimensions and tolerances
DS/EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
DS 685:1990 Steel conduit thread. Sizes
DS/EN 10241:2001 Steel threaded pipe fittings
DS/EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
DS/ISO 228/2:1985 Pipe threads where pressure-tight joints are not made on the threads. Part 2: Verification by means of limit gauges
DS/ISO 68-1:1999 ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads
DS/EN 10242/A2:2003 Threaded pipe fittings in malleable cast iron
DS/EN 10242/A1+AC:2000 Threaded pipe fitting in malleable cast iron
DS/EN 10242:1996 Threaded pipe fitting in malleable cast iron

Professional Standard - Military and Civilian Products, iso7/1 pipe thread

WJ 1161-1979 Thread gauge and technical conditions Brinell taper pipe thread ring gauge (D=1″/16~2″)

PK-PSQCA, iso7/1 pipe thread

PS 473-1965 PIPE THREADS FOR GAS LIST TUBES AND SCREWED FITTINGS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS (1/8 INCH TO 6 INCHES)
PS 474-1965 PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE NOT MADE ON THE THREADS

U.S. Military Regulations and Norms, iso7/1 pipe thread

ARMY A-A-59326/14 B-2011 REDUCER, EXTERNAL PIPE THREAD BY FEMALE, TYPE XIII
ARMY A-A-59326/12 A VALID NOTICE 1-2008 REDUCER, MALE BY FEMALE AND FEMALE BY MALE, TYPE XI
ARMY A-A-59326/13 A VALID NOTICE 1-2008 REDUCER, MALE BY EXTERNAL PIPE THREAD, TYPE XII
ARMY A-A-59326/14 A VALID NOTICE 1-2008 Reducer, External Pipe Thread by Female, Type XIII

IT-UNI, iso7/1 pipe thread

Professional Standard - Railway, iso7/1 pipe thread

TB/T 3474.1-2017 Thread connecting hose for locomotive and rolling stock.Part 1: Metal corrugated hose
TB/T 333-1993 threaded pipe joint
TB/T 805-1993 Male Threaded Shoulder Sleeves
TB/T 804-1991 Internally Threaded Shoulder Sleeves

Taiwan Provincial Standard of the People's Republic of China, iso7/1 pipe thread

CNS 4108-1977 Coupling Threads for Hydraulic or Pneumatic Piping (Pipe Threads)
CNS 494-1990 Parallel Pipe Threads
CNS 495-1990 Taper Pipe Threads
CNS 12752-1990 Screw Thread Limit Gauges for Parallel Pipe Threads
CNS 12753-1990 Gauges for Taper Pipe Threads
CNS 4549-1978 Steel Conduit Thread, Dimensions
CNS 4109-1977 Pipe Couplings for Hydraulic Piping (Pipe Threads)

RU-GOST R, iso7/1 pipe thread

GOST 18924-1973 Screw double-ended plugs with inserts for pipe cylindrical threads from 1/16 "up to 1 1/2" nominal diameter. Construction and basic sizes
GOST 21973-1976 Threaded piping joints. Joining threads. Series
GOST R 51906-2002 Thread connections for casing, tubing and pipe-lines and thread gauges for them. General technical requirements
GOST 6227-1980 Taps for taper thread. Specifications
GOST 15803-1976 Threaded pipeline connections. Counternuts. Construction
GOST 21975-1976 Threaded piping joints. Nomenclature of case parts
GOST 18930-1973 Truncated form screw ring-gauges for pipe cylindrical threads from 1/16" up to 3 3/4" nominal diameter. Construction and basic sizes
GOST R 51906-2015 Thread connections for casing, tubing, line pipe and thread gauges for them. General technical requirements

IN-BIS, iso7/1 pipe thread

NO-SN, iso7/1 pipe thread

NS 964-1972 Hexagon bolts - Unified - Semifinished - Wholly threaded - UNC threads 1/4" to 1 1/2"
NS 5253-1972 Palnuts, self locking counternuts - UNF-threads 1/4" to 1"
NS 1818-1969 Wing nuts - UNC threads 1/4" to 1"
NS 1814-1972 Round head bolts - UNC threads 1/4" to 1"
NS 5321-1977 Hand taps for pipe threads for taper threads
NS 858-1963 Eye-bolts: UNC threads - 1/4" to 1 1/2"
NS 5320-1977 Hand taps for pipe threads for parallel threads
NS 5587-1984 Steel tubes - Carbon steel tubes suitable for screwing in accordance with ISO 7/1
NS 5252-1972 Palnuts, self locking counternuts - UNC threads 1/4" to 2"

Lithuanian Standards Office , iso7/1 pipe thread

LST EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
LST EN 10241-2001 Steel threaded pipe fittings
LST EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
LST EN 10242+A1+AC-2001 Threaded pipe fitting in malleable cast iron
LST EN 10242+A1+AC-2001/A2-2003 Threaded pipe fittings in malleable cast iron

AENOR, iso7/1 pipe thread

UNE-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
UNE-EN 10241:2001 Steel threaded pipe fittings.
UNE-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
UNE-EN 10242:1995 THREADED PIPE FITTING IN MALLEABLE CAST IRON.

VN-TCVN, iso7/1 pipe thread

TCVN 4681-1989 Pipe cylindical threads
TCVN 4631-1988 Pipe tape threads

CL-INN, iso7/1 pipe thread

INDITECNOR 34-41ch-1959

HU-MSZT, iso7/1 pipe thread

MSZ 8615-1960

Professional Standard - Non-ferrous Metal, iso7/1 pipe thread

YS/T 440-2001 Inner grooved copper tube

Professional Standard - Light Industry, iso7/1 pipe thread

QB/T 1822-1993 Hose threading machine
QB/T 2509-2001 Pipe thread stock and dies

Aerospace Industries Association/ANSI Aerospace Standards, iso7/1 pipe thread

AIA/NAS NAS 1923-1980 Clamp, Hose, Band, Tangential Worm, Light Weight (Rev. 1)
AIA/NAS NAS 363-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 363-369-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread Rev. 2
AIA/NAS NAS 364-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 365-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 366-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 367-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 368-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
AIA/NAS NAS 369-1981 Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)

Defense Logistics Agency, iso7/1 pipe thread

DLA A-A-59443 VALID NOTICE 2-2012 Adapter, Straight, Pipe Thread to Tube, Male Solder-Joint, Refrigeration
DLA A-A-59443 A-2013 ADAPTER, STRAIGHT, PIPE THREAD TO TUBE, MALE SOLDER-JOINT, REFRIGERATION
DLA FED-STD-H28/7 A VALID NOTICE 2-1995 SCREW-THREAD STANDARDS FOR FEDERAL SEVICES SECTION 7 PIPE THREADS, GENERAL PURPOSE

Professional Standard - Automobile, iso7/1 pipe thread

QC/T 960.1-2013 Road vehicle.Hydraulic braking systems.Part 1：Double-flare pipes, tapped holes, male fittings and tube seats

National Metrological Verification Regulations of the People's Republic of China, iso7/1 pipe thread

JJG(石油) 51-2000 Verification Regulation of Master Gage for Rotary Shouldered Connections Thread,Casing Round Thread and Tubing Thread
JJG(石油) 41-1996 Verification Regulation of Casing and Tubing Round Thread Working

Military Standard of the People's Republic of China-General Armament Department, iso7/1 pipe thread

GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.3A-2003 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.3A-2015 MJ threads Part 3: Limiting dimensions of pipe fitting threads

British Standards Institution (BSI), iso7/1 pipe thread

BS EN 10241:2000 Steel threaded pipe fittings
BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
BS ISO 68-1:1998 ISO general purpose screw threads - Basic profile - Metric screw threads
BS ISO 68-2:1998 ISO general purpose screw threads - Basic profile - Inch screw threads
BS ISO 68-2:1999 ISO general purpose screw threads - Basic profile - Inch screw threads
BS ISO 68-1:1999 ISO general purpose screw threads - Basic profile - Metric screw threads
BS 1936-1:1952 Undercuts and runouts for screw threads - Inch screw threads

Professional Standard-Ships, iso7/1 pipe thread

CB/T 952-1999 Threaded joint for brarch pipe
CB 562-1968 Hose threaded joint
CB/T 4461-2016 Branch pipe threaded joint
CB 20065-2012 Specification for bellows male thread stop valves
CB/T 3920-2015 Screw-tube for marine auxiliary boiler
CB/T 3920-2002 Screw-tube for marine auxiliary boiler
CB/T 4328-2013 The flat shouder threaded joints of tube
CB 202-2012 Through bulkhead pieces with thread joint
CB* 56-1983 Pipe Flat Shoulder Thread Fittings
CB* 821-1984 Low pressure pipe threaded joint
CB* 822-1984 High pressure pipe threaded joint

PL-PKN, iso7/1 pipe thread

PN G53031-1969 Gauges for casing ?hread
PN G53033-1966 Gauges for casing threads
PN E02502-1970 Threads for s?eel conduit pipes Dimensions
PN M60225-1972 Exten*ion piece for ?ops

GM North America, iso7/1 pipe thread

GM GMX200-1988 Dryseal Pipe Threads

Professional Standard - Ferrous Metallurgy, iso7/1 pipe thread

YB 822-1957 conical pipe thread

BR-ABNT, iso7/1 pipe thread

ABNT NBR 14516-2017 Thread tapping machine with threaded rod - Pg 7 to Pg 48 threads for rigid conduit connections - Requirements

AIA/NAS - Aerospace Industries Association of America Inc., iso7/1 pipe thread

NAS140-1945 Stud - Fine Thread (Rev 1)
NASM8846-2011 INSERT@ SCREW-THREAD@ HELICAL COIL (Rev 1)
NAS139-1945 Stud - Coarse Thread (Rev 1)

GOSTR, iso7/1 pipe thread

GOST 34057-2017 Thread connections for casing, tubing, line pipe and thread gauges for them. General technical requirements

VE-FONDONORMA, iso7/1 pipe thread

NORVEN 64-18-1969

工业和信息化部, iso7/1 pipe thread

JB/T 13583.1-2019 CNC Pipe Thread Lathe Part 1: Accuracy Inspection

FI-SFS, iso7/1 pipe thread

SFS 2449-1969
SFS C.5.14-1953 Panssariputkikierteet Mutterikierteiden tulkit
SFS 5389-1988
SFS 2447-1969
SFS 2065-1966
SFS C.5.13-1953 Panssariputkikierteet Ruuvikierteidentulkit

NZ-SNZ, iso7/1 pipe thread

NZS/BS 21-1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) (Incorporating Amendment 1: December 1990)

American National Standards Institute （ANSI), iso7/1 pipe thread

ANSI B1.20.3-1976 Dryseal Pipe Threads (Inch)
ANSI/ASME B1.20.3-1976 Dryseal Pipe Threads (Inch)
ANSI/ASME B16.14-2013 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
ANSI/ASME B16.14-1991 Ferrous Pipe Plugs, Bushing, and Locknuts with Pipe Threads
ANSI/ASME B1.20.7-1991 Hose Coupling Screw Threads – Inch
ANSI/ASME B1.20.1-2013 Pipe Threads, General Purpose (Inch)
ANSI/ASME B1.20.1-1983 Pipe Threads, General Purpose (Inch)

CENELEC - European Committee for Electrotechnical Standardization, iso7/1 pipe thread

EN 60238:1995 Edison Screw Lampholders
EN 60238:1996 Edison Screw Lampholders (Incorporates Amendment A1: 1997)
EN 60238:1986 Edison Screw Lampholders
EN 60238:1989 Edison Screw Lampholders
EN 60238:1998 Edison Screw Lampholders

Professional Standard - Urban Construction, iso7/1 pipe thread

CJ/T 431-2013 Helical corrugated steel pipe for drains

Group Standards of the People's Republic of China, iso7/1 pipe thread

T/CNHA 1018-2019 Steel threaded pipe nipples
T/ZZB 1331-2019 Seamless inner grooved copper tube

国家市场监督管理总局、中国国家标准化管理委员会, iso7/1 pipe thread

GB/T 20928-2020 Seamless inner grooved copper tube

Professional Standard - Aviation, iso7/1 pipe thread

HB 5563-1981 threaded part of pipe joint
HB 4-3-1983 Threaded part of pipe joint

ZA-SANS, iso7/1 pipe thread

SANS 1700-2-1:2003 Fasteners Part 2: Screw threads Section 1: ISO general purpose screw threads - Basic profile - Metric screw threads

Professional Standard - Petroleum, iso7/1 pipe thread

SY/T 5199-1997 Thread compounds for casing,tubing and line pipe
SY 6949-2013 Special threaded casing and tubing

U.S. Air Force, iso7/1 pipe thread

AIR FORCE AN5026 VALID NOTICE 1-1970 CAP-INBOARD DUAL PROPELLER SHAFT THREAD
AIR FORCE AN5026-1947 CAP-INBOARD DUAL PROPELLER SHAFT THREAD

BE-NBN, iso7/1 pipe thread

未注明发布机构, iso7/1 pipe thread

BS 1936-1:1952(2007) Specification Undercuts & runouts for screw threads — Part 1 : Inch screw threads