ZH
RU
ES

Low frequency impedance time

Low frequency impedance time, Total:59 items.

In the international standard classification, Low frequency impedance time involves: Aerospace electric equipment and systems, Semiconductor devices, Electrical and electronic testing, Audio, video and audiovisual engineering, Vocabularies, Telecommunication systems, Radiocommunications, Electric filters, Automatic controls for household use, Components and accessories for telecommunications equipment, Electromagnetic compatibility (EMC).

United States Navy, Low frequency impedance time

NAVY MIL-C-24189 (2)-1966 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY
NAVY MIL-C-24189-1965 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY

SAE - SAE International, Low frequency impedance time

SAE J2366-1L-2001 ITS Data Bus - Low Impedance Stereo Audio (LISA)

National Metrological Verification Regulations of the People's Republic of China, Low frequency impedance time

JJG(电子) 05007-1987 HP4192A Low Frequency Impedance Analyzer Trial Verification Regulations

US-ACEI, Low frequency impedance time

IPC TM-650 2.5.5.7-1992 Characteristic Impedance and Time Delay of Lines on Printed Boards by TDR

Taiwan Provincial Standard of the People's Republic of China, Low frequency impedance time

CNS 7012-1981 Method of Test for the Collector-Base Time Constant and for the Resistive Part of the Common-Emitter Input Impedance

International Telecommunication Union (ITU), Low frequency impedance time

ITU-R QUESTION 2457-2006 Interference to the standard frequency and time signal service in the low-frequency band caused by noise from electrical sources
ITU-R TF.537-1978 (WITHDRAWN) Reduction of Mutual Interference between Emissions of the Standard-Frequency and Time-Signal Service on the Allocated Frequencies in Bands 6 and 7 - Section 7C - Systems for Dissemination and Comparison
ITU-R RA.1513-2-2015 Levels of data loss to radio astronomy observations and percentage-of-time criteria resulting from degradation by interference for frequency bands allocated to the radio astronomy service on a primary basis
ITU-R RA.1513-1-2003 Levels of data loss to radio astronomy observations and percentage-of-time criteria resulting from degradation by interference for frequency bands allocated to the radio astronomy on a primary basis Question ITU-R 227/7

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Low frequency impedance time

QUESTION 245/7-2006 Interference to the standard frequency and time signal service in the low-frequency band caused by noise from electrical sources

Society of Automotive Engineers (SAE), Low frequency impedance time

SAE J2366/1L-2001 ITS Data Bus - Low Impedance Stereo Audio (LISA)

Group Standards of the People's Republic of China, Low frequency impedance time

T/CPSS 1005-2021 Technical specification of impedance sweeping equipment of low voltage DC distribution and utilization system

Professional Standard - Petroleum, Low frequency impedance time

SY/T 5585.1-1993 Test method of electrical parameters of seismic data transmission cable Characteristic impedance and propagation time test

British Standards Institution (BSI), Low frequency impedance time

BS EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Low voltage decoupling filters - Impedance filter
BS EN 50065-7:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN 50065-4-4:2023 Tracked Changes. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filter. Impedance filter
BS IEC 62153-4-16:2016 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
21/30422308 DC BS EN 50065-4-4. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 4-4. Low voltage decoupling filter. Impedance filter
BS EN 61000-4-13:2002+A2:2016 Electromagnetic compatibility (EMC) - Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

Association Francaise de Normalisation, Low frequency impedance time

NF EN 50065-7:2002 Transmission de signaux sur les réseaux électriques basse tension dans la bande de fréquences de 3 kHz à 148,5 kHz - Partie 7 : impédance des appareils
NF EN 50065-4-4:2005 Transmission de signaux sur les réseaux électriques basse tension dans la bande de fréquences de 3 kHz à 148,5 kHz - Partie 4-4 : filtres basse tension de découplage - Filtre d'impédance
NF EN IEC 61169-65:2021 Connecteurs pour fréquences radioélectriques - Partie 65 : spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques, avec un diamètre intérieur du conducteur extérieur de 1,35 mm, à couplage à vis, impé...
NF C90-201-7*NF EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7 : equipment impedance
NF EN IEC 61169-60:2021 Connecteurs pour fréquences radioélectriques - Partie 60 : spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques avec couplage par poussée - Impédance caractéristique 50 Ohm (type SMPM)
NF C90-201-4-4*NF EN 50065-4-4:2005 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4 : low voltage decoupling filter - Impedance filter.
NF EN 61169-38:2015 Connecteurs pour fréquences radioélectriques - Partie 38 : spécification intermédiaire - Connecteurs coaxiaux pour fréquences radioélectriques, de type glissant (applications en panneau et fond de panier) - Impédance caractéristique 50 ohms (ty...
NF EN IEC 61169-64:2019 Connecteurs pour fréquences radioélectriques - Partie 64 : spécification intermédiaire - Connecteurs RF coaxiaux avec un conducteur extérieur disposant d'un diamètre intérieur de 0,8 mm - Impédance caractéristique de 50 ohms (type 0,8)
NF EN 61169-36:1997 Connecteurs pour fréquences radioélectriques - Partie 36 : spécification intermédiaire pour les connecteurs microminiatures coaxiaux pour fréquences radioélectriques à accouplement par encliquetage. Impédance caractéristique 50 ohms (type MCX).
NF EN IEC 61169-71:2022 Connecteurs pour fréquences radioélectriques - Partie 71 : Spécification intermédiaire pour connecteurs RF coaxiaux avec conducteur extérieur présentant un diamètre intérieur de 5 mm - Impédance caractéristique de 50 ohms (type NEX10R)
NF EN IEC 61169-54:2021 Connecteurs pour fréquences radioélectriques - Partie 54 : spécification intermédiaire relative aux connecteurs coaxiaux avec diamètre intérieur du conducteur extérieur de 10 mm, impédance caractéristique nominale 50 Oméga, série 4,3-10
NF C90-133-4-16*NF EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16 : electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usi

IN-BIS, Low frequency impedance time

AENOR, Low frequency impedance time

UNE-EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 7: Equipment impedance.
UNE-EN 50065-4-4:2004 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 4-4: Low voltage decoupling filter - Impedance filter

Lithuanian Standards Office , Low frequency impedance time

LST EN 50065-7-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 7: Equipment impedance
LST EN 50065-4-4-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter. Impedance filter

Danish Standards Foundation, Low frequency impedance time

DS/EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance
DS/EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter
DS/EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods – Part 4-16: Electromagnetic compatibility (EMC) – Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin

German Institute for Standardization, Low frequency impedance time

DIN EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter; German version EN 50065-4-4:2003
DIN EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance; German version EN 50065-7:2001

European Committee for Electrotechnical Standardization（CENELEC）, Low frequency impedance time

EN 50065-7:2001 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment Impedance
EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter

ES-UNE, Low frequency impedance time

UNE-EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Low frequency impedance time

JEDEC JESD284A-1963 Test Methods for the Collector-Base Time Constant and for the Resistive Part of the Common-Emitter Input Impedance Formerly EIA-284-A, Revision of EIA-284 (formerly RS-284)

AT-OVE/ON, Low frequency impedance time

OVE EN 50065-4-4-2021 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter (english version)

International Electrotechnical Commission (IEC), Low frequency impedance time

IEC 62153-4-16:2016 Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial s
IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Low frequency impedance time

GB/T 17626.13-2006 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test

Electronic Components, Assemblies and Materials Association, Low frequency impedance time

ECA EIA-364-108-2000(R2007) TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable assemblies or Interconnection Systems
ECA EIA-364-108 ERTA-2016 TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable Assemblies or Interconnection Systems

ECIA - Electronic Components Industry Association, Low frequency impedance time

EIA-364-108-2000 TP-108 Impedance@ Reflection Coefficient@ Return Loss@ and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors@ Cable assemblies or Interconnection Systems
EIA-364-108 ERTA-2016 TP-108 Impedance@ Reflection Coefficient@ Return Loss@ and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors@ Cable Assemblies or Interconnection Systems

Standard Association of Australia （SAA）, Low frequency impedance time

AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
AS/NZS 61000.4.13:2012