ZH
RU
ES

peak and g peak

peak and g peak, Total:201 items.

In the international standard classification, peak and g peak involves: Electronic tubes, Construction materials, Television and radio broadcasting, Air quality, Electricity. Magnetism. Electrical and magnetic measurements, Environmental protection, Iron and steel products, Road vehicle systems, Installations in buildings, Domestic, commercial and industrial heating appliances, Aerospace electric equipment and systems, Welding, brazing and soldering, Space systems and operations, Nuclear energy engineering, Testing of metals, Vocabularies, Linear and angular measurements, Optoelectronics. Laser equipment, Audio, video and audiovisual engineering, Rubber, Plastics, Acoustics and acoustic measurements, Solar energy engineering, Special measuring equipment for use in telecommunications, Tyres, Medical equipment, Medical sciences and health care facilities in general, Aircraft and space vehicles in general, Non-ferrous metals, Fruits. Vegetables, Protective equipment, Lamps and related equipment, Resistors, Semiconductor devices, Radiation measurements, Rotating machinery, Electrical equipment for working in special conditions, Analytical chemistry, Interface and interconnection equipment.

American Gear Manufacturers Association, peak and g peak

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

Professional Standard - Electron, peak and g peak

SJ 454-1973 Methods of measurement for peak voltage drop of tube, reverse peak voltage drop of tube and rectifying current of high-voltage rectifier tubes
SJ/T 31333-1994 Requirements of readiness and methods of inspection and assessment for automatic annular wire crest welders
SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth
SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width

AGMA - American Gear Manufacturers Association, peak and g peak

09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

British Standards Institution (BSI), peak and g peak

BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
CP 1018-1971 Electric floorwarming systems for use with off-peak and similar supplies of electricity
BS 6647:1985 Guide to oscilloscopes and peak voltmeters for impulse tests
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS 6840-10:1991 Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
BS PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Exported spikes
BS ISO 16900-12:2016 Respiratory protective devices. Methods of test and test equipment. Determination of volume-averaged work of breathing and peak respiratory pressures
BS EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes
BS EN ISO 23747:2009 Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS EN ISO 23747:2015 Tracked Changes. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
21/30433501 DC BS EN 14488-3. Testing sprayed concrete - Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results

International Telecommunication Union (ITU), peak and g peak

ITU-R BS.1771-2006 Requirements for loudness and true-peak indicating meters
ITU-R BS.1771-2012 Requirements for loudness and true-peak indicating meters
ITU-R BS.1771 FRENCH-2006 Requirements for loudness and true-peak indicating meters Sp閏ifications des appareils de mesure indiquant l'intensit?sonore et les niveaux de cr阾e vrais
ITU-R BS.1771-1-2012 Requirements for loudness and true-peak indicating meters
ITU-R BS.1770-4-2015 Algorithms to measure audio programme loudness and true-peak audio level
ITU-R BS.1770-1-2007 Algorithms to measure audio programme loudness and true-peak audio level
ITU-R BS.1770-2-2011 Algorithms to measure audio programme loudness and true-peak audio level
ITU-R BS.1770-2 SPANISH-2011 Algorithms to measure audio programme loudness and true-peak audio level Algoritmos para medir la sonoridad de los programas radiof髇icos y el nivel de cresta de audio real
ITU-R BS.1770-2015 Algorithms to measure audio programme loudness and true-peak audio level
ITU-R BS.1770-1 FRENCH-2007 Algorithms to measure audio programme loudness and true-peak audio level Algorithmes de mesure de l'intensit?sonore des programmes audio et des niveaux de cr阾e vrais des signaux audio
ITU-R S.732-1-2012 Method for statistical processing of earth station antenna side-lobe peaks to determine excess over antenna reference patterns and conditions for acceptability of any excess
ITU-R BS.707-5-2005 Transmission of multisound in terrestrial television systems PAL B B1 D1 G H and I and SECAM D K K1 and L

Association Francaise de Normalisation, peak and g peak

NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF EN 10049:2014 Mesure de la rugosité moyenne Ra et du nombre de pics RPc sur les produits plats métalliques
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF S95-185:2009 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans.
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF S95-185*NF EN ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
NF L58-100-309*NF EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 309 : exported spikes
NF EN ISO 23747:2015 Matériel d'anesthésie et de réanimation respiratoire - Débitmètres à débit de pointe expiratoire pour l'évaluation de la fonction pulmonaire chez les êtres humains respirant spontanément
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF S76-020-12*NF ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12 : determination of volume-averaged work of breathing and peak respiratory pressures
NF EN 14488-3:2006 Essais pour béton projeté - Partie 3 : résistances à la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipèdiques en béton renforcé par des fibres
NF ISO 16900-12:2016 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 12 : détermination du travail respiratoire en fonction du volume respiratoire et détermination des pics de pressions respiratoires

Professional Standard - Radio Television Film, peak and g peak

GY/T 263-2012 Technical requirements for loudness and true-peak indicating meters
GY/T 262-2012 Algorithms to measure audio programme loudness and true-peak audio level

Group Standards of the People's Republic of China, peak and g peak

T/CI 020-2022 Technical guidelines for emission peak and carbon neutrality planning in cities
T/CAQI 325-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/GXTDFTZH 002-2022 Guangxi Carbon Dafeng Carbon Neutral Service Qualification Management Measures
T/NAIA 0222-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/CECCEDA 001-2022 Enterprise carbon peaking and carbon neutrality management general requirements?and evaluation guidelines
T/GZJNJP 03-2022 Guizhou Province Carbon Peak Carbon Neutral Service Qualification Management Measures
T/HTDFTZH 003-2022 Hainan Province Carbon Peak Carbon Neutral Service Qualification Management Measures

CZ-CSN, peak and g peak

CSN IEC 790:1992 Oscilloscopes and peak voltmeters for impulse tests

International Electrotechnical Commission (IEC), peak and g peak

IEC 60790:1984 Oscilloscopes and peak voltmeters for impulse tests

European Committee for Electrotechnical Standardization（CENELEC）, peak and g peak

HD 479-1986 Oscilloscopes and Peak Voltmeters for Impulse Tests

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, peak and g peak

GB/T 813-1989 Oscilloscopes and peak voltmeters for impulse tests
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 24981.1-2010 Test methods of long afterglow phosphors activated by rare earths.Part 1:Determination of emission dominantpeak and chromaticity coordinates
GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results

Heilongjiang Provincial Standard of the People's Republic of China, peak and g peak

DB23/T 3600-2023 Guidelines for Preparing the Carbon Peak Carbon Neutral Standard System

Society of Automotive Engineers (SAE), peak and g peak

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J345A-1969 Wet or Dry Pavement Passenger Car Tire Peak and Locked Wheel Braking Traction
SAE J345-1969 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION

German Institute for Standardization, peak and g peak

DIN 7824-2:1990 Rims for motor vehicles and trailers; flange B, hump types
DIN 7817-3:1979-03 Rims for motor vehicles and trailers, hump special types
DIN 7817-2:1990 Rims for motor vehicles and trailers; flange J, JK and K; hump types
DIN 7817-3:1979 Rims for motor vehicles and trailers, hump special types
DIN 7817-2:1990-06 Rims for motor vehicles and trailers; flange J, JK and K; hump types
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN EN ISO 23747:2007 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneoulsy breathing humans (ISO 23747:2007); German version EN ISO 23747:2007
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN EN 2349-309:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006
DIN EN ISO 23747:2015-12 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015); German version EN ISO 23747:2015
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
DIN 49848-3:2002-12 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN 49848-3:2002 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006
DIN 6809-4:1988 Clinical dosimetry; applications of X-rays with peak voltages between 10 and 100 kV in radiotheraphy and soft tissue diagnostics
DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...
DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).

Defense Logistics Agency, peak and g peak

DLA DSCC-DWG-V62/13608-2013 MICROCIRCUIT, LINEAR, SINGLE CHANNEL HIGH SPEED, LOW SIDE GATE DRIVER (WITH 4-A PEAK SOURCE AND 8-A PEAK SINK), MONOLITHIC SILICON
DLA MIL-PRF-19500/614 H-2013 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA MIL-PRF-19500/614 G-2012 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS) TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA MIL-PRF-19500/613 D-2011 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H
DLA MIL-PRF-19500/613 E-2013 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H

Indonesia Standards, peak and g peak

SNI 04-6628-2001 Oscilloscopes and peak voltmeter for impulse tests

Korean Agency for Technology and Standards (KATS), peak and g peak

KS R ISO 8667:2016 Commercial vehicles and buses－Cross-tooth gearbox flanges, type T
KS R ISO 12667:2016 Commercial vehicles and buses－Cross-tooth propeller shaft flanges, type T
KS C 6370-1995(2000) FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6370-1990 FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )

ES-UNE, peak and g peak

UNE-EN 16602-70-07:2014 Space product assurance - Verification and approval of automatic machine wave soldering (Endorsed by AENOR in November of 2014.)
UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)
UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes (Endorsed by AENOR in March of 2007.)
UNE-EN ISO 23747:2016 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)

Jiangsu Provincial Standard of the People's Republic of China, peak and g peak

DB3212/T 1133-2023 A guide to the application of quality infrastructure in peak carbon neutrality

Hunan Provincial Standard of the People's Republic of China, peak and g peak

DB43/T 2656-2023 Guidelines for corporate carbon peak and carbon neutrality based on ESG evaluation

ESDU - Engineering Sciences Data Unit, peak and g peak

ESDU 89050 B-2012 Boundary walls@ fences and hoardings: mean and peak wind loads and overturning moments
ESDU 89050 B-1990 Boundary walls@ fences and hoardings: mean and peak wind loads and overturning moments.
TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.

IN-BIS, peak and g peak

Danish Standards Foundation, peak and g peak

DS/EN 14612:2004 Space product assurance - Verification and approval of automatic machine wave soldering
DS/EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/EN ISO 23747:2009 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
DS/EN ISO 4287/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number

Lithuanian Standards Office , peak and g peak

LST EN 14612-2004 Space product assurance - Verification and approval of automatic machine wave soldering
LST EN 10049-2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
LST EN ISO 23747:2009 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007)
LST EN ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)
LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
LST EN ISO 4287:2007/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)

BE-NBN, peak and g peak

NBN E 52-019-1989

International Organization for Standardization (ISO), peak and g peak

ISO/CD 6863 Preparation of Plutonium and Uranium spikes for Isotope Dilution Mass Spectrometry (IDMS)
ISO 23747:2007 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO/TR 18147:2014 Space environment (natural and artificial) - Method of the solar energetic protons fluences and peak fluxes determination
ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, peak and g peak

ITU-R BS.1770-3-2012 Algorithms to measure audio programme loudness and true-peak audio level
ITU-R BS.1770-2006 Algorithms to measure audio programme loudness and true-peak audio level ((Question ITU-R 2/6))
ITU-R BS.707-4-1998 Transmission of Multisound in Terrestrial Television Systems Pal B@ D1@ G@ H and I@ and Secam D@ K@ K1@ and L

PL-PKN, peak and g peak

PN T01504-60-1987 Diodes Measuring methods Instant and peak forward recovery voltages Ufr, Ufrm and forward recovery time tfr

IPC - Association Connecting Electronics Industries, peak and g peak

IPC 7530A CHINESE-2017 Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow and Wave)
IPC 7530 CHINESE-2001 Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC 7530 HUNGARIAN-2001 Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave) Processes

Institute of Electrical and Electronics Engineers (IEEE), peak and g peak

IEEE 193-1971 IEEE Standard Method for Measurement of Weighted Peak Flutter of Sound Recording and Reproducing Equipment
ANSI/IEEE Std 193-1971 IEEE Standard Method for Measurement of Weighted Peak Flutter of Sound Recording and Reproducing Equipment

AT-ON, peak and g peak

ONORM C 9444-1984 Testing of elastomers; analysis of multi-peak traces obtained in fear-, adhesion- and peel tests

RU-GOST R, peak and g peak

GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
GOST 21185-1975 Quasypeak level meters of the sound frequency electrical signals. Types, basic parameters and methods of testing

Electronic Components, Assemblies and Materials Association, peak and g peak

ECA EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets

National Aeronautics and Space Administration (NASA), peak and g peak

NASA-CR-2270-1973 Extended hydrodynamic theory of the peak and minimum pool boiling heat fluxes
NASA-CR-33-1964 Probability functions for random responses: prediction of peaks, fatigue damage, and catastrophic failures

European Committee for Standardization (CEN), peak and g peak

EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes
prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

CEN - European Committee for Standardization, peak and g peak

EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products

国家广播电影电视总局, peak and g peak

GY/T 282-2014 Technical requirements for average loudness and true peak audio level of digital television programs

SE-SIS, peak and g peak

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

American National Standards Institute （ANSI), peak and g peak

ANSI S4.3-1982 Method for measurement of weighted peak flutter of sound recording and reproducing equipment
ANSI/UL 674-2003 Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G

Japanese Industrial Standards Committee (JISC), peak and g peak

JIS C 8917:1998 Environmental and endurance test methods for crystalline solar PV modules
JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ECIA - Electronic Components Industry Association, peak and g peak

EIA-364-71A-1999 TP-71A Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
EIA-364-71B-2001 TP-71b Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets (Revision of EIA-364-71A; Errata July 13@ 2001)

Professional Standard - Aviation, peak and g peak

HB 6167.19-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Voltage spike test
HB 6167.19-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 19: Voltage spike test

SAE - SAE International, peak and g peak

SAE J345-1968 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION
SAE J345-2018 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION

AENOR, peak and g peak

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
UNE-EN ISO 4287:1999/A1:2010 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)

NZ-SNZ, peak and g peak

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

Professional Standard - Medicine, peak and g peak

YY/T 1438-2016 Anaesthetic and respiratory equipment.Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans

GM Europe, peak and g peak

GME17009-2013 Porosities and Surface-Discontinuities Forks Shift / Transmission M1x Porosit鋞en und Oberfl鋍hen-Fehlstellen Schaltgabeln / Getriebe M1x Issue 1; English/German; Includes Appendix A and B

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., peak and g peak

IEEE NESC WHITE PAPER-2015 Visioning Sessions Output at the 2015 NESC Summit: Future of the NESC@ the NESC Process@ and Design Versus Safety

YU-JUS, peak and g peak

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength

未注明发布机构, peak and g peak

BS 6840-10:1991(1999)*IEC 268-10:1991 Sound system equipment — Part 10 : Methods for specifying and measuring the characteristics of peak programme level meters
BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature

Audio Engineering Society, peak and g peak

AES 6-1982 AES Standard Method for Measurement of Weighted Peak Flutter of Sound Recording and Reproducing Equipment 3/5/1999 Printing R(2003)

国家市场监督管理总局、中国国家标准化管理委员会, peak and g peak

GB/T 24981.1-2020 Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., peak and g peak

ASHRAE 4837-2006 Modeling and Testing of a Utility Peak Reducing Residential Hot/Dry Air Conditioner (HDAC) Using Microchannel Heat Exchangers
ASHRAE 4496-2002 Optimization Method for Minimizing Annual Energy@ Peak Demand@ and Annual Energy Cost Through Use of Building Thermal Storage

AIA/NAS - Aerospace Industries Association of America Inc., peak and g peak

NASM24634-2012 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G AND T@ APPROXIMATE HOLE SIZES FOR (Rev 1)
NASM24634-1998 Screw@ Tapping@ Thread Cutting-Types D@F@G and T@ Approximate Hole Sizes for

European Association of Aerospace Industries, peak and g peak

AECMA PREN 2349-309-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 309: Exported Spikes Edition P 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, peak and g peak

PREN 2349-309-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 309: Exported Spikes (Edition P 1)

Canadian Standards Association (CSA), peak and g peak

CSA Z23747-08-CAN/CSA-2008 Mat閞iel d'anesth閟ie et de r閍nimation respiratoire ?D閎itm鑤res ?d閎it de pointe expiratoire pour l'関aluation de la fonction pulmonaire chez les 阾res humains respirant spontan閙ent premi鑢e 閐ition
CAN/CSA-Z23747-2008 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (First Edition)

Aerospace, Security and Defence Industries Association of Europe (ASD), peak and g peak

ASD-STAN PREN 2349-309-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 309: Exported Spikes (Edition P 1)

Standard Association of Australia （SAA）, peak and g peak

AS/NZS ISO 16900.12:2021 Respiratory protective devices — Methods of test and test equipment, Method 12: Determination of volume-averaged work of breathing and peak respiratory pressures

GB-REG, peak and g peak

REG 29 CFR PART 2510-2011 DEFINITIONS OF TERMS USED IN SUBCHAPTERS C, D, E, F, AND G OF THIS CHAPTER

IX-EU/EC, peak and g peak

COM(2003) 271 FINAL-2003 COMMUNICATION FROM THE COMMISSION TO THE COUNCIL AND THE EUROPEAN PARLIAMENT, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS Towards A Global Partnership In The Information Society: EU Perspective In The Context Of The United
COM(2001) 53 FINAL-2001 Communication from the Commission to the Council and European Parliament Ten Years After Rio: Preparing for the World Summit on Sustainable Development in 2002

American Society of Mechanical Engineers (ASME), peak and g peak

ASME N-652-1-2001 Alternative Requirements to Categories B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria Section XI, Division 1; (SUPP 12)

Aerospace Industries Association, peak and g peak

AIA NASM24634-1998 Screw, Tapping, Thread Cutting-Types D,F,G and T, Approximate Hole Sizes for FSC 5305

RO-ASRO, peak and g peak

STAS 7169/3-1988 VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES Scales A,B:C,D,E,F,G,H,K,L,M,R and S